Materials Structure and Heat and Mass Transfer

<ul><li>Preface</li><li>Chapter 1: Numerical Investigation of Transfer Phenomena in Heat and Fluid Flow in the Technical Systems</li><li>Study of Natural Convection Melting of Phase Change Material inside a Rectangular Cavity with Non-Uniformly Heated Wall</li><li>Heat Transfer Enhancement of Heat Sources at its Optimum Position in a Square Enclosure with Ventilation Ports</li><li>Forced Convection inside a Vertical Circular Cylinder with an Inner Coaxial Rectangular Cylinder</li><li>Effects of Important Parameters on the Transition from Forced to Mixed Convection Flow in a Square Cavity</li><li>Conjugate Heat and Mass Transfer on Steady MHD Mixed Convection Flow along a Vertical Slender Hollow Cylinder with Heat Generation and Chemical Reaction Effects</li><li>Heat Transfer Mode and Effect of Fluid Flow on the Morphology of the Weld Pool</li><li>Prandtl and Richardson Number Effects on Mixed Convection in a Vented Enclosure on Application to the Cooling of the Fins</li><li>Heat and Mass Transfer in an Inclined Bi-L-Shaped Layered Porous Media: Effect of Buoyancy Ration</li><li>Numerical Simulation of Boundary Conditions Effect on Heat Transfer and Entropy Generation in a Square Cavity Filled with Al₂O₃-Cu -Water Hybrid Nanofluid</li><li>Numerical Study in Three Dimensions of Influence of the Fluids Nature and Obstacle Position on the Electronic Component Cooling</li><li>Numerical Investigation of Orifice Shape Effect on the Flow Behavior of the Jet-Cavity Interaction</li><li>Numerical Assessment of Turbulent Flow Driving in a Two-Sided Lid-Driven Cavity with Antiparallel Wall Motion</li><li>Ventilation of Square Cavity Containing a Heat Source</li><li>Upper Openings Ventilation System Study of the Building by the Lattice Boltzmann Model</li><li>Chapter 2: Heat and Mass Transfer Processes in Technologies of Food Industry</li><li>Drying Kinetics, Desorption Isotherms and Apparent Diffusivity of Sage Leaves</li><li>Food's Conservation into 03 Dimension's Models of Cold Stores Operated by 03 Refrigeration Systems in Biskra Region (Classic, Absorption, Adsorption)</li><li>Realization of a Solar Dryer Assisted by a Parabolic Dish Concentrator</li><li>Chapter 3: Materials Structure and Processing</li><li>Corrosion Behavior of Electrodeposited Nickel Coating Reinforced by Cr₂O₃ Particles</li><li>Electrodeposited Ni-Co Films from Electrolytes with Different Co Contents</li><li>A Comparative Study of Microstructure, Coefficient of Friction and Wear Rate of Alloy Ni-Cr-B-Si-C-W</li><li>Effect of Lanthanum Substitution on Structure and Modulation in Bi₂Sr_2-xLa_xCaCu₂O_8+d (0?x?0.3) Superconducting Compound</li><li>Study of the Structural, Dynamic and Thermodynamic Properties of the III- Antimonides Semiconductors</li><li>The Calcination Temperature Effect on the Phase Formation of the PZT Ceramic: How the same Calcination Temperature, Result in Different Phase's Formation</li><li>Propolis Extract as Corrosion Inhibitor of Iron Alloy Immersed in an Ethylene Glycol / Water, 0.1 M NaCl Solution</li><li>Optical, Structural and Spectroscopic Characterization of ZnS Nanocrystals Embedded in KBr Single Crystal Matrix Grown by Czochralski Method</li><li>Investigation of the Structural, Optical and Electrical Properties of Zinc Oxide Co-Doped with Fluorine and Cobalt</li><li>Effect of Pulse Current Electrodeposition on Structural, Mechanical and Corrosion Resistance Properties of Ni- TiO₂Nanocomposite Coatings</li><li>Microstructural and Mechanical Properties of Welding and Thermal Spraying Coatings on Ductile Cast Iron</li><li>Mechanical and Tribological Behaviors of Nanocomposite Titanium Nitrides Coatings</li><li>Optimization of Automatic TIG Welding Parameters of AISI 304L ASS Welds Using Response Surface Methodology</li><li>Microstructural Characterization, Tribological and Corrosion Behaviour of Forged and Cast Grinding Balls a Comparative Study</li><li>Thermo-Kinetic Study of Adsorption of Methylene Blue in Aqueous Solutions Using Algerian Illite Natural and Activated Mineral Clay</li><li>Realization and Characterization of CH₃NH₃PbI₃ /c-Si Heterojunction</li><li>Effect of Rolling Deformation on Corrosion Behaviour of AISI 304L in 3% NaCl Solution</li><li>Improving Microhardness of AISI 316L Stainless Steel by Ball Burnishing- Optimization by BOX-BEHNKEN Model</li><li>Experimental Study of Tool Wear Evolution during Turning Operation Based on DWT and RMS</li><li>Electrochemical and Theoretical Studies of <i>Inula viscosa</i> Extract as Green Corrosion Inhibitor for Mild Steel in Hydrochloric Acid Solution</li><li>Heat Treatment Effect on the Microstructural, Hardness and Tribological Behavior of A105 Medium Carbon Steel</li><li>Characterization of Concrete by Using Bulk Longitudinal Ultrasonic Waves at Low Frequencies- Correlation with Compressive Strength Testing</li><li>Optical Properties of Lithium Borate Glass Containing Barite</li><li>Effect of Heat Treatment on the Structure, Wear and Corrosion of AISI L6 Tool Steel</li><li>Tamanrasset's Clay Characterization and Use as Low Cost, Ecofriendly and Sustainable Material for Water Treatment: Progress and Challenge in Copper Cu (II)</li><li>Application of Associated and Non-Associated Flow Metal Plasticity for F.S.S Sheet</li><li>Study of Chemical and Physical Characterization of the Natural Dolomite of Ain Mlila-Algeria</li><li>Contribution of the Tribal Study to the Effectiveness of the Wool Fiber Composite Compared to Fiberglass Composite Materials</li><li>Wire Drawing Effect on Microstructural and Textural Evolution in Medium Carbon Steel Wires</li><li>Effect of Fibers Orientation on the Fracture of Polymer Concrete Based on Quartz, Polyester and Jute Fabrics</li><li>Use of Glass Powder and Sand Dune in Concrete: Characterization and Performance</li></ul>