Materials and Technologies in Construction and Architecture IV

<ul><li>Preface</li><li>On the Issue of Standardizing Concrete Frost Resistance to Ensure the Reinforced Concrete Structures Durability</li><li>Microfiller Influence on the Modified Cement Granulometric Composition</li><li>Recipe and Technological Factors' Influence on Vibrocentrifuged Basalt Fiber Concrete Strength and Deformation Properties</li><li>Pressed Magnesia Composites with Improved Weather Resistance Properties</li><li>Heat Release during 3d-Printable Materials Setting and Hardening</li><li>Analysis of the Synthetic Fiber Influence on the Cement Stone New Formations Composition in Foam Concrete</li><li>Cellular Materials on Carbonate Rocks</li><li>Polymer Fibers in Foam Concrete Application Efficiency</li><li>Fine-Grained Fibre Concrete of Run-Of-Crusher Stone Using Volcanic Ash</li><li>Fiber-Hypsum-Cement-Vermiculite-Concrete Composites Using Volcanic Ash</li><li>Estimation of the Filled Two-Component Cold Curing Polymer System Performance as a Coating for Protecting Concrete Surfaces from the Aggressive Environment Exposure</li><li>Modified Concrete Mixes for Monolithic Construction</li><li>Investigation of the Synthesized Calcium Hydrosilicates Effect on the Properties of Energy-Saving Wall Silicate Blocks Obtained on the Basis of Technogenic Raw Materials</li><li>Physical and Mechanical Properties of the Road Surface when Replacing the Finely Crushed Mineral Part of Asphalt Concrete with Porcelain Stoneware Production Waste</li><li>Study of the Relationship between Concrete and its Reinforcement Elastic-Plastic Characteristics</li><li>Fine-Grained Lightweight Concrete from Volcanic Tuffsawing Waste</li><li>Influence of the Stabilizing Additive "ANT" and Soil Stabilizers <<LSCS>> and <<PSCS>> for the Strength Characteristics of Highly Dispersed Soils</li><li>Investigation of the Effect of Combined Binder Based on Portland Cement and Lime on the Properties of Non-Autoclave Silicate Materials Modified with Synthetic Crystalline Filler</li><li>Fire-Retardant Plastering Mortars Based on Exfoliated Vermiculite and Volcanic Ash</li><li>Materials for 3D Concrete Printing: Approach to Standardization in Russia</li><li>Bamboo as a Unique Ecological Building Material of the XXI Century: Bamboo Description, Bamboo Physical and Mechanical Properties Studies</li><li>Proposals for Determining the Relative Deformations Design Value of ?_b3 Concrete in Volumetric Deformation Conditions</li><li>Influence of Granulometric Composition and Type of Fillers and Additives on the Strength and Biostability of Cement Composites Based on Dry Building Mixtures</li></ul>