Materials and Technologies in Construction and Architecture III

<ul><li>Preface</li><li>Recipes of Knitting Systems Alkaline Activation Using Natural Raw Materials of the Chechen Republic</li><li>Structural Formation of a Clinkless Cement Binding Alkali Battery with Thermoactived Margel</li><li>Structural Formation of the Cement Pastes Based on the Concrete Modified Dispersed Mineral Components</li><li>The Activation Technology for the Surface Modification High Voltage Electric Field Dispersed Mineral Additives for Concrete</li><li>The Cement Mechanical Activation Effective Application Field Determination</li><li>Silicate Brick with Reduced Density and Thermal Conductivity</li><li>The Study of the Quartz Sand Bio Consolidation Processes as a Result of Carbonate Mineralization by Urolithic Bacteria</li><li>Pressed Composites Based on Gypsum and Magnesia Binders Modified with Secondary Resources</li><li>Effect of Calcium Synthetic Hydro Silicate Additives on the Cement Systems' Technological Characteristics</li><li>On the Influence of Cross-Section and Reinforcement of Reinforced Concrete Constructions on the Concentration of Coarse Aggregate in Concrete with Frame Structure</li><li>The Reinforced Concrete Reinforcement Corrosion Degradation Inhibition with Nitrates of Alkali and Alki-Earth Metals</li><li>The Production Technology of the Ceramic Brick Soft Molding Based on Opoka-Like Rocks</li><li>The Glass Powders' Dispersion Effect on the Glass-Reinforced Concrete Performance Properties</li><li>Theoretical Substantiation of the Foam Concrete Strength Formation Laws</li><li>Mass Compositions Calculation on the Basis of Argillites at Ceramic Tiles Production</li><li>The Effect of Fine Dispersed Slag Component on the Slag Portland Cement Properties</li><li>Utilization of Waste from Thermal Power Plants in High Performance Materials' Production</li><li>Raw Materials in East Donbass Based on Waste Piles Processing Screenings for the Large-Sized Ceramic Stones' Production</li><li>Investigation of the Various Binders' Effect on the Lime Binder Carbonate Hardening Process for its Use in Additive Technologies</li><li>Fiber Foam Tuffcrete Structure and Properties Formation on the Basis of Volcanic Tuff Dusting Waste</li><li>Gypsum-Cement Composites Based on Volcanic Ash</li><li>Synthesis of Modifiers in the System Cao-Sio₂-H₂O and their Influence on the Non-Autoclave Silicate Materials' Properties Using Aluminosilicate Binder</li><li>Physical and Mechanical Properties and Biological Resistance of the Calcareous Composites on Activated Mixing Water</li><li>Some Questions of Shrinking Concrete Deformations with Extending Additive on Porous Fillers in Kabardino-Balkaria</li><li>Frame Polymerbetons Based on Fillers of Different Nature</li><li>Cement Composites' Biostability</li><li>The Influence of Salts' Presence in the Materials on their Moisture and Thermal Conductivity</li></ul>