Preface
Chapter 1: Ferrites and Manganites
Effect of Fe3+ Partial Substitution at Mn-Site on Electroresistance Behaviour in La0.7Ba0.3Mn1-xFexO3 (x = 0 and 0.02) Manganites
Effect of Fe Doping on the Structural, Electrical and Magnetic Properties of Perovskite La0.7Ca0.3Mn1-xFexO 3 (X = 0, 0.01, 0.03 and 0.05)
Electroresistance Effect due to Mo Substitution at Mn-Site in Monovalent Doped La0.85Ag0.15Mn1-xMoxO3 (x = 0.00 and 0.05) Manganites
Microwave Absorption Properties of Monovalent Doped La0.85Ag0.15MnO3 Manganites Prepared by Solid State Method
Band Structure and Thermoelectric Properties of Ni(x)Zn(1-x)Fe2O4
Structural and Dielectric Analysis of La0.88Bi0.12Mn0.80Ni0.20O3 Composite
Synthesis and Characterization Barium M-Hexaferrites (BaFe12-2xCoxMnxNixO19) as a Microwave Absorbent Material
Structural and Optical Properties of BiFeO3 via Polymer-Assisted Hydrothermal Synthesis under Different Weight of Chitosan
Effect of TiO2 Nanoparticle on the Structural and Electrical Properties of Nd0.67Sr0.33MnO3 /TiO2 Composites
Structural and Electrical Properties of La0.7Ca0.3MnO3 /?-Fe2O3 Composites
Chapter 2: Glass and Ceramics
Linear Shrinkage, Strength and Porosity of Alumina-Based Ceramic Foam with Corn Starch as Pore Former
Comparative Spectroscopic Studies on Luminescence Performance of Er3+ Doped Tellurite Glass Embedded with Different Nanoparticles (Ag Co and Fe) at 0.55 ?m Emission
Optimum Lasing Cavity for Erbium Doped Zinc Tellurite Glass Rods Embedded with Ag Nanoparticles
The Optical Performance of Holmium Oxide Doped Tellurite Glass for Potential Optical Fiber
Effect of Samarium Ions on Physical and Optical Properties of Zinc Borotellurite Glass System
Fabrication of Silica (SiO2) Foam from Rice Husk Ash (RHA): Effects of Solid Loadings
Chapter 3: Functional Nanomaterials and Nanotechnologies
Assessment of Magnetic Properties between Fe and Ni Doped ZnO Nanoparticles Synthesized by Microwave Assisted Synthesis Method
Enhanced Transport Critical Current Density of Tl-1212 Bulk Superconductor Added with Nickel-Zinc Ferrite Nanoparticles
Synthesis and Characterization of Low Density Bi-2223 Cuprates Superconductor Doped Eu2O3 Nanoparticles
Spheroid Nickel Nanoparticles Synthesized in CTAB Solution Using Gamma Radiation
Microcrystalline Cellulose as Graphite Exfoliation Agent and its Effect on Electrical Conductivity
Synthesis and Characterization of Copper Selenide and Tin Selenide Powders by Mechanical Alloying Method
Synthesis of Silver Nanoparticles by Plasma-Assisted Hot-Filament Evaporation for Enhancing in Luminescence Properties of Organic Light Emitting Diode
The Study of Platinum Coated Carbon Nanotubes as Third-Order Nonlinear Optical Materials
Influence of Zr Additive on the Chemical Reduction Behaviour of MoO3 in Carbon Monoxide Atmosphere
Nanocellulose-Based Filters as Novel Barrier Systems for Chemical Warfare Agents
Chapter 4: Materials for Sensing Technologies
Morphology Studies of SWCNT Dispersed in Conducting Polymer as Potential Sensing Materials
Multi-Walled Carbon Nanotubes Functionalized with Carboxyl and Amide for Acetone detection at Room Temperature
Supramolecular Interactions in Aromatic Structures for Non-Optical and Optical Chemosensors of Explosive Chemicals
Facile Synthesis and Characterizations of Silver Nanoparticles-Reduced Graphene Oxide Hybrid
Chapter 5: Biomaterials
Synthesis, Characterization and Bioactivity of Chitosan Hydroxyapatite Composite Doped with Strontium
In Vivo Toxicity Assessment of Nickel Zinc Carbon Nanotubes in a Living Host Model
Synthesis of Calcium/Aluminium-Ciprofloxacin-Layered Double Hydroxide for a New Antibacterial Drug Formulation
Chapter 6: Materials and Technologies for Environmental Engineering
Feasibility of Irradiated Corn-Based Bioplastics as Packaging Material
Synthesis of Carbide Lime Derived Strong Base Catalyst for Biodiesel Production
Photocatalytic Degradation of Methylene Blue by TiO2- Graphene Composite
Cellulose Nanofiber as Potential Absorbent Material for Chloride Ion
Rapid Adsorption of Magnetite Nanoparticles from Recycled Mill Scale Waste as Potential Adsorbent for Removal of Cu(II) Ions
Comparative Study on Micronsized and Nanosized Carica papaya Seed Modified Pullulan as Biocoagulant in Wastewater Treatment
Study on the Effect of Applied Pressure on Iron and Manganese Rejection by Polyamide and Polypiperazine Amide Nanofiltration Membranes
Chapter 7: Polymers and Composites
Fatigue Crack Growth of Natural Rubber/Butadiene Rubber Blend Containing Waste Tyre Rubber Powders
Enhancement of Heat Ageing Properties of Epoxidised Natural Rubber Blend
Conversion of Bacterial Cellulose to Cellulose Nitrate with High Nitrogen Content as Propellant Ingredient
Preliminary Study on the Effect of Sulphuric Acid to Nitric Acid Mixture Composition, Temperature and Time on Nitrocellulose Synthesis Based Nata de Coco
Effect of Fabrication Method on Tensile Behaviour of Polysiloxane (POS) Filled Rice Husk Silica (RHA SiO2) Composites
Purification on Kappa Carrageenan by Re-Precipitation Technique
Thermomechanical Study and Thermal Behavior of Plasticized Poly(Lactic Acid) Nanocomposites
Thermomechanical Properties and Thermal Behavior of Poly(Lactic Acid) Composites Reinforced with TiO2 Nanofiller
Thermomechanical, Crystallization and Melting Behavior of Plasticized Poly(Lactic Acid) Nanocomposites
Acoustic Performance Mixture of Natural Fibres of Oil Palm Frond (OPF) and Empty Fruit Bunch (EFB)
Localized Deep and Shallow Traps of ?-Peaks from Thermally Stimulated Current (TSC) Measurement on Thermoplastic Polymers
Investigation on the Dielectric Properties of Palm Oil with Silicon Carbide Doping for Transformer Application
Chapter 8: Batteries and Fuel Cells
Electrical and Electrochemical Studies of Polymer Gel Electrolytes Based on Agarose-LiBOB and P(VP-co-VAc)-LiBOB
Physical and Electrical Studies of High Molecular Weight Poly (Methyl Methacrylate) Based Solid Polymer Electrolytes
Ab Initio Study on Structural Properties of NaFeSO4OH Cathode Material for Rechargeable Sodium Ion Battery
Structural and Conductivity of NiO-BCZY Anode Functional Layer for Proton Conducting Fuel Cell
The Impact of Zr Substitution on the Crystal Structure of Yb Doped BaCeO3 Solid Solution Prepared by a Sol-Gel Method
Perovskite-Type Oxide-Based Dual Composite Cathode for Solid Oxide Fuel Cells: A Short Review
The Effect of Ammonium Bromide on Methylcellulose Biopolymer Electrolytes for Electrical Studies
Properties of Gel Polymer Electrolyte Based Poly(Vinylidine Fluoride-?o-Hexafluoropropylene) (PVdF-HFP), Lithium Perchlorate (LiClO4) and 1-Butyl-3-Methylimmidazoliumhexafluorophosphate [PF6]
Poly(Vinyl Alcohol)/ N-Methylene Phosphonic Chitosan/ 2-Hydroxyethylammonium Formate (PVA/NMPC/2-HEAF) Membrane for Fuel Cell Application
Effect of pH Value on the Synthesis of NiO Nanoparticles and Microstructure of NiO Based Composite Anode
Chapter 9: Thin Films
Vibrational Spectroscopy Analysis of Oligothiophene Blend Film
Influence of Applied Potential on Electrodeposited ZnSe/ZnO Nanostructured Films for Photoelectrochemical Cell
Influence of Various Target to Substrate Distances on the Structural and Optical Properties of Sputtered Gd-Doped ZnO Thin Films
The Optical Properties of Thin Films Tin Oxide with Triple Doping (Aluminum, Indium, and Fluorine) for Electronic Device
The Effect of pH and Monomer Concentration on Polyaniline Thin Films Grown Using Electrodeposition
Chapter 10: Coatings and Surface Engineering
Effect of pH and Immersion Time on the Corrosion Protection of SDBS:ZnSO4 Pretreated Mild Steel in Sodium Chloride Solution
Corrosion Inhibition of Mild Steel by Electrodeposited Poly(M-Aminophenol) Coating
Effect of Mechanical Agitation on Cr-Al2O3 Nanocomposite Coatings Fabricated from Trivalent Chromium Electrodeposition
Chapter 11: Structural Materials
Effect of Cooling Rate on the Volume Fractions of the Constituent Phases of the Tempcore Steel Rebars
The Effect of Blast Exposure Distance on Hardness and Reduced Modulus Properties of Lead-Free Solder
Compressibility Characteristics of Peat Soil Treated with MUF-P Resin
Effect of Gamma Radiation on Micromechanical Behaviour of SAC305 Solder
Chapter 12: Computational Methods and Numerical Investigation
Effect of Vanadium Doping on Thermoelectric Properties of CaMnO3 Using First Principle Calculations
Structural and Electronic Properties of Ag-Doped in Ba-Site of YBa2-xAgxCu3O? Using Density Functional Theory via First Principle Study
Studying the Dynamics and Complexity of a 3D Laser Plasma System
