<ul><li>Preface</li><li>Chapter 1: Plenary Lectures</li><li>Material Forming Digital Twins: The Alliance between Physics-Based and Data-Driven Models</li><li>Machining of Additive Manufactured Metal Alloys</li><li>Chapter 2: Additive Manufacturing</li><li>Characterization of Surface and Bulk Features of SLM Parts</li><li>From Theory to Practice: Development and Calibration of Micro Pellet Extruder for Additive Manufacturing</li><li>A Comprehensive Analysis of AISI 316L Samples Printed via FDM: Structural and Mechanical Characterization</li><li>Study of Bonding Mechanisms in Cold Spray of Metal-to-Polymer through a Numerical Approach</li><li>Laser Metal Deposition with Coaxial Wire Feeding for the Automated and Reliable Build-Up of Solid Metal Parts</li><li>Material Characterization of Hybrid Components Manufactured by Laser-Based Directed Energy Deposition on Sheet Metal Substrates</li><li>Optimization of Laser Metal Deposition Process for 2205 Duplex Stainless Steel</li><li>Comparison of Scan Strategies for Side Roughness Optimization of Al6061-Zr Alloy Produced by Laser Powder Bed Fusion (L-PBF), Benefits and Drawbacks on Different Part Profiles</li><li>Influence of Geometric Parameters on Buckling Behavior of 3D Printed Anisogrid Structures</li><li>Cold Sprayed Metallic Coatings on Fibre-Reinforced Composites: A Machine Learning Approach for the Optimization of the Process</li><li>On the Influence of Cross-Section Size on Measured Strength of SLM-Produced AlSi10Mg-Alloy</li><li>Experimental Setup for Fatigue Testing of Additively Manufactured Specimens</li><li>Selective Laser Melting of Ti-6Al-4V Lattices: Case Study on a Spinal Cage Prosthesis</li><li>Maximizing the Resolution Range of Addictive-Manufactured Miniature-Scale Force-Sensing Devices for Biomedical Applications</li><li>Acoustic Performances of Polymers Hierarchical Structure Produced with Material Jetting Technology</li><li>Efficient Build-Up of High-Strength Aluminum Structures Using Friction Stir Additive Manufacturing</li><li>Experimental Investigation of Efficiency and Deposit Process Temperature during Multi-Layer Friction Surfacing</li><li>18Ni300 Maraging Steel Produced via Direct Energy Deposition on H13 Tool Steel and DIN CK45</li><li>Exploring Potentialities of Direct Laser Deposition: Thin-Walled Structures</li><li>
<i>In Silico</i> Finite Element Approach on Mechanical Behavior in Superelastic Nitinol</li><li>Silver Nano-Colloid Characterization for Printing Application</li><li>Selective Laser Melting of Ti6Al4V: Effects of Heat Accumulation Phenomena due to Building Orientation</li><li>Investigating the Melt-Pool Temperature Evolution in Laser-Powder Bed Fusion by Means of Infra-Red Light: A Review</li><li>Laser Powder Bed Fusion of Aluminium Alloy 6061 for Ultra-High Vacuum Applications</li><li>The Analysis of Small-Scale Notches on the Fatigue Performance of SLM Ti-6Al-4V; A Theory of Critical Distances Approach</li><li>Flexible and High-Precision Integration of Inserts by Combining Subtractive and Non-Planar Additive Manufacturing of Polymers</li><li>Laser-Powder Bed Fusion of Inconel 718 Alloy: Effect of the Contour Strategy on Surface Quality and Sub-Surface Density</li><li>Metamaterial Mechanical Performances: A Single Cell Analysis</li><li>Discontinuous Galerkin FEM with Hot Element Addition for the Thermal Simulation of Additive Manufacturing</li><li>Prediction of Solid-State Phase Transformations for the Ti-6Al-4V Alloy</li><li>Assessing the Accuracy of Different Remapping Methods in Adaptive Mesh Refinement</li><li>Uncertainty Quantification in the Directed Energy Deposition Process Using Deep Learning-Based Probabilistic Approach</li><li>Thermal Modeling of Laser Powder Bed Fusion during Printing on Temperature-Unstable Materials Considering Local Sintering</li><li>Effect of Finite Element Mesh Size and Time-Increment on Predicting Part-Scale Temperature for Powder Bed Fusion Process</li><li>3D Modeling of Polymer Selective Laser Sintering Process: Laser-Polymer Interaction Modeling</li><li>Porosity Prediction in AM Using PBF-LB Employing Time-Series Classification</li><li>Modelling Thermoplastic Filaments' Sintering by Level Set Method</li><li>Ultrasonic Monitoring of Part's Height and Layer Thickness in Powder Bed Fusion</li><li>Chapter 3: Extrusion and Drawing</li><li>Metal Forming-Induced Residual Stresses and Rule of Mixtures' Prediction of Tensile Behavior of Bimetallic Wires</li><li>Process Stability and Reproducibility of the Dieless Drawing Process for AZ31 Magnesium Wires</li><li>Characteristics of the Combined Rolling and Extrusion Process</li><li>Effect of Temperature on Surface Cracking Defects in AA7075 Hot Extrusion</li><li>Modeling Friction in HyperXtrude for Hot Forward Extrusion Simulation of EN AW 6060 and EN AW 6082 Alloys</li><li>Simulation of Coarse Grain Evolution during Hot Extrusion of Al-Mg-Si Alloy</li><li>Material Flow Visualization for Metal Extrusion on near Industrial Scale</li><li>Towards Multi-Scale Modeling of Zirconium Alloys Recrystallization and Application to Thermo-Mechanical Processes Optimization</li><li>FEM Analysis of the Skin Contamination Behavior in the Extrusion of a AA6082 Profile</li><li>Assessment of the Optimization Strategy for Nitrogen Cooling Channel Design in Extrusion Dies</li><li>Comparison of Friction Extrusion Processing From Bulk and Chips of Aluminum-Copper Alloys</li><li>A Model for Roll-Drawing of Full Sections with Experimental Verification</li><li>Copper Wire Multi-Pass Drawing: Process Modeling and Optimization</li><li>Possibility of Deformation of Billet with Various Internal Structure in KOBO Extrusion</li><li>Extrusion of Lightweight Aluminum and Magnesium Alloys Structures for Aviation Applications</li><li>Prediction of Underfilling Defect in Aluminium Profile Extrusion Based on ALE Simulation</li><li>Chapter 4: Forging and Rolling</li><li>Methodology to Investigate the Transformation Plasticity for Numerical Modelling of Hot Forging Processes</li><li>Numerical Investigations on Stresses and Temperature Development of Tool Dies during Hot Forging</li><li>FEM Modelling of Weld Damage in Continuous Cold Rolling of MIG/MAG Butt-Welded Stainless Steel Strips</li><li>Elaboration of Parameters of Large-Size Rings Production Process Taking into Account the Evolution of Material Relative Density</li><li>Data-Driven Roll Pass Design of Wire Rod Mills</li><li>Effects of Tool-Workpiece Friction Condition on Energy Consumption during Piercing Phase of Seamless Tube Production</li><li>Impact of a Splined Mandrel Geometry on Die Filling in a Cold Forging Process with Adjustable Deformation Zone</li><li>Performance Analysis of Work-Roll Wear Models on Hot Rolling</li><li>Chapter 5: Incremental and Sheet Metal Forming</li><li>Process Window Definition to Predict Mechanical Properties of Press Hardened Parts of Boron Steel with Tailored Properties</li><li>Influence of Conformal Cooling Channel Parameters on Hot Stamping Tool and Press-Hardening Process</li><li>Setting Residual Stresses in Tensile Stress-Superposed Incremental Sheet Forming</li><li>Hot Spinning of Cutting Blades for Food Industry</li><li>Multistage Deep-Drawing with Alternating Blank Draw-in for Springback Reduction in Transfer and Progressive Dies</li><li>Manufacture of Defined Residual Stress Distributions in the Friction-Spinning Process: Driven Tool and Subsequent Flow-Forming</li><li>Evaluation of Cold Roll Forming Strategies for the Production of a High-Strength Aluminum Hat Profile</li><li>Hybrid Forming - A Method for Simultaneous Forming of High Strength Metal Sheet and Long Fiber Reinforced Plastic</li><li>Preliminary Study on the Onset of Necking Detection Using DIT in Tensile Tests</li><li>Increasing the Forming Limits in Hole Flanging of Dual-Phase (DP) 1000 Steel Using Punch Rotation</li><li>Analysis of the Part Quality and Process Stability when Producing Metallic Micro Parts by Multi-Stage Bulk Forming from Sheet Metal</li><li>Analysis of Side-Wall Wrinkling in Deep Drawing Processes</li><li>A Materials Science-Based Approach to Finite Element Simulation of Warm-Forming of Al-Mg-Zn Alloys</li><li>Numerical Study to Promote the Residual Stresses Development during ISF Process with Improvement in Two Point Incremental Die Forming</li><li>Influence of Macro-Structured Tools on the Formability of Aluminum Alloys in the Cryogenic Temperature Range</li><li>Numerical Modelling of Conventional and Incremental Forming of Thin-Walled Tube</li><li>Relevance of Symmetry Assumptions in the 3D Numerical Modeling of a Flowformability Test</li><li>Effects of Temperature on Deep Drawing of an Aluminum Alloy for Different Yield Criteria and Hardening Models</li><li>Analysis of the Possibility of Forming Stiffening Ribs in Litecor Metal-Plastic Composite Using the Single Point Incremental Forming Method</li><li>Prediction of Forming Forces for Incremental Micro-Forming Using Finite Element Analysis</li><li>Design of Single Point Incremental Forming for a Motorcycle Headlight Fairing Manufacture</li><li>Identification of Influencing Factors in Machine Hammer Peening with Consideration of Lubricant Influences</li><li>Imprinting of Micro-/Nano-Textures onto Metals and Alloys with Use of the Laser-Printed DLC-Die</li><li>In Process Measurement Techniques Based on Available Sensors in the Stamping Machines for the Automotive Industry</li><li>Innovative Online Measurement and Modelling Approach for Property-Controlled Flow Forming Processes</li><li>Analysis of Thickness Distributions Calculated from Surface Strains Obtained through Digital Image Correlation for Incremental Sheet Forming</li><li>Chapter 6: Formability of Metallic Materials</li><li>Prediction of Forming Limit Diagram Using the Marciniak-Kuczynski Method for Ti-6Al-4V Using Different Material Models</li><li>Modeling of Deep Rolling as a Distortion Compensation Strategy during Profile Grinding</li><li>Failure Prediction of Automotive Components Utilizing a Path Independent Forming Limit Criterion</li><li>Local Formability of Different Advanced High Strength Steels</li><li>Work-Hardening Behavior of a ZX10 Magnesium Alloy Sheet under Monotonic and Reverse Loadings</li><li>Drawing Capability of High Formable Packaging Steel: Comparison of Limiting Drawing Ratio and Forming Limit Curve</li><li>Effect of Temperature and Strain Rate on Formability of Titanium Alloy KS1.2ASN</li><li>Determination of Forming Limit Curves - Strain Path and Failure Analysis</li><li>Investigation of the Influence by Size Effects on the Material Characterization of the Uniaxial Compression Stress State</li><li>Application of the DIC System to Build a Forming Limit Diagram (FLD) of Multilayer Materials</li><li>On the Anisotropic Mechanical Response of Ti6Al4V Sheet at High Strain Rates</li><li>Surface Quality and Mechanical Properties in Drawn Stainless Steel Profile Wires Caused by Process Parameters</li><li>Material Parameters Sensitivity on Springback Modelling of Simple Bending Process</li><li>DIC Strain Monitoring during Fatigue of Cold-Formed High Strength Steel</li><li>Influence of the Anisotropic Behavior on Equibiaxial Paths</li><li>Experimental Investigation of Factors Influencing the Determination of the Onset of Yielding by Temperature Measurement</li><li>Investigation of the Plane Strain Behaviour of a Laser-Heat Treated Aluminium Alloy</li><li>A Novel Method for the Determination of High Temperature FLCs of ECAP-Processed Aluminum AA5083 Sheet Metal</li><li>A Critical Evaluation of Forming Limit Curves Regarding Layout of Bending Processes</li><li>Bulging of Isotropic Materials</li><li>Finite Element Analysis of AA 6016-T4 Sheet Metal Forming Operations Using a New Polycrystalline Model</li><li>Deep-Drawing of Commercially-Pure Niobium Sheet</li><li>Investigation of the Tube Expansion Test with Elastomer Using Locally Overaged AA6063 Tubes</li><li>Characterization of Yield Surface Evolution of AZ31 from Shear to Equibiaxial Tension</li><li>Study on the Effect of Anisotropy on Plastic Flow Localization of Third Generation Advanced High Strength Steel</li><li>On the Effect of the Tension-Compression Ratio on Forming of Isotropic Materials</li><li>Fine Blanking Limits of Manganese-Boron-Steel in Fine Blanking Compared to Tempered Steel with Variation of Sheet Metal Temperature</li><li>Chapter 7: Friction and Wear in Forming Processes</li><li>Application of Calcium Carbonate as Green Lubricant Additive in Sheet Metal Forming</li><li>Near-Net Forging of Titanium and Titanium Alloys by the Plasma Carburized SKD11 Dies</li><li>Method for the Estimation of Wear Resistance Curves in Sheet Metal Forming with Uncoated Tools</li><li>FEA Approach for Wear and Damage Prediction of Tools for the Progressive Die Stamping of Steel Washers</li><li>Load-Adapted Surface Modifications to Increase Lifetime of Forging Dies</li><li>Non-Uniform Effect of the Contact Conditions on the Earing Profile in Cylindrical Cups of Anisotropic Materials</li><li>Performance Evaluation of Lubricants with Swift Cup Drawing</li><li>Slider on Sheet Tester Development for Characterizing Galling</li><li>
<i>In Situ</i> Wear Measurement of Hot Forging Dies Using Robot Aided Endoscopic Fringe Projection</li><li>Chapter 8: Composites Forming Processes</li><li>A Hypoelastic Approach for Simulating the Independent Bending Behavior of Textile Composite within the Stress Resultant Shell</li><li>The Influence of the Sample Size of Bias Extension Tests on the Results of Forming Simulations of Fiber-Reinforced Thermoplastics</li><li>A Crystallization Kinetic Model for Long Fiber-Based Composite with Thermoplastic Semicrystalline Polymer Matrix</li><li>Simulation of Wrinkling during Forming of Binder Stabilized UD-NCF Preforms in Wind Turbine Blade Manufacturing</li><li>Comprehending the Bending: A Comparison of Different Test Setups for Measuring the Out-of-Plane Flexural Rigidity of a UD Fabric</li><li>Numerical Evaluation of Press Forming Parameters and Mould Geometry in Wood Plastic Composite (WPC) Products</li><li>On the Effect of Release Agent and Heating Time on Tool-Ply Friction of Thermoplastic Composite in Melt</li><li>Evaluation of the Patternability of Fibre-Based Materials with Converting Experiments</li><li>Cold Spray Metallization of Hybrid Thermoplastic - Thermoset Fiber Reinforced Composite</li><li>Robotic-Assisted Measurement of Fabrics for the Characterization of the Shear Tension Coupling</li><li>Quantitative Assessment of Reactive and Non-Reactive Binder Systems on First Ply Adhesion for Dry Fiber Placement Processes</li><li>Mechanical Behaviour of Magnesium Alloy Based - Fiber Metal Laminates after Fabrication Using Different Metal Surface Treatments</li><li>Effect of the Geometries on the Fabric's Formability</li><li>Frictional and Cohesion Behavior of Natural Tows in Order to Assess the Tow Sliding during Composite Forming</li><li>Flow Behaviour of Carbon Fibre Sheet Moulding Compound</li><li>Formability Experiments for Unidirectional Thermoplastic Composites</li><li>Capillary Driven Saturation of Textile Reinforcing Structures Proposal for an Extension of Lucas-Washburn Equation</li><li>Post-Forming Limits of Carbon Fibre Reinforced Thermoplastic Tubular Structures in a Rotary Draw Bending Process</li><li>Large Scale Forming of Non-Crimp Fabrics for Aerostructures</li><li>Towards 3D Process Simulation for<i> In Situ</i> Hybridization of Fiber-Metal-Laminates (FML)</li><li>Investigation of the Membrane Behavior of UD-NCF in Macroscopic Forming Simulations</li><li>Anomaly Detection during Thermoplastic Composite Infusion: Monitoring Strategy through Thermal Sensors</li><li>Defects Reduction in the Robotic Layup Process</li><li>Offline Robot-Path-Planning and Process Simulation for the Structural Analysis of Coreless Wound Fibre-Polymer Composite Structures</li><li>Chapter 9: Innovative Joining by Forming Technologies</li><li>In-Mold-Assembly of Hybrid Bending Structures by Compression Molding</li><li>Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints</li><li>Realtime Prediction of Self-Pierce Riveting Joints - Prognosis and Visualization Based on Simulation and Machine Learning</li><li>Investigations on Combined <i>In Situ</i> CT and Acoustic Analysis during Clinching</li><li>The Effect of the Setting Force on the Fatigue Resistance of a Blind Rivet Nut Set in CFRP</li><li>Influence of the Surrounding Sheet Geometry on a Clinched Joint</li><li>Experimental and Numerical Investigation on Manufacturing-Induced Pre-Strain on the Load-Bearing Capacity of Clinched Joints</li><li>Analysis of Machine-Sided Influences during Clinching</li><li>Influence of the Sheet Edge Condition on the Fracture Behavior of Riv-Bonded Aluminum-Magnesium Joints</li><li>Preliminary Study of FSW Process of Dissimilar Aluminium Alloys in Battery Pack Assembly for Hybrid Vehicles Production</li><li>Data-Based and Analytical Models for Strength Prediction of Mechanical Joints</li><li>Functionality Study of an Optical Measurement Concept for Local Force Signal Determination in High Strain Rate Tensile Tests</li><li>Chapter 10: Machining and Cutting</li><li>Characterization of Abrasion and Erosion Mechanisms during Abrasive Waterjet Machining of Hard Metals</li><li>Influence of the Workpiece Material and Cooling Condition on the Texture Obtained through Ultrasonic Vibration-Assisted Machining</li><li>Nitrogen Supersaturation into AISI420 Mold for Precise Machining</li><li>Drillability of Magnesium-Based Fiber Metal Laminates Obtained via Hot Metal Pressing with Different Metal Surface Treatments</li><li>Numerical and Experimental Investigations in Orthogonal Milling of 15-5PH Stainless Steel</li><li>Influence of Coulomb's Friction Coefficient in Finite Element Modeling of Orthogonal Cutting of Ti6Al4V</li><li>Tribocorrosion Behavior of Ti6Al4V Machined and Burnished Components for Biomedical Application</li><li>Cutting Force in Drilling with Flat Bottom Drill</li><li>Fabrication of Anti-Icing Surface Structures on Aluminum Alloy for Aerospace Applications</li><li>Experimental Analysis of Circular Milling for Material Identification in Aerospace Industry</li><li>Comparative Study of the Drilling Operation in Duplex Stainless Steels with Drills of Two and Three Cutting Edges</li><li>Optimization of Machining Process for Improved Sustainability</li><li>Chapter 11: Non-Conventional Processes</li><li>Selected Aspects of Surface Integrity of Inconel 625 Alloy after Dry-EDM in Carbon Dioxide</li><li>On the Suitability of Induction Heating for the Manufacture of Reinforced Aluminum Foam Structures</li><li>Experimental Investigation of the Effect of EDM Debris Particles Mixed into the Dielectric Fluid on Tool Feed Rate in Drilling-EDM</li><li>Synthesis of ZnO and CuO Nanowires by Thermal Oxidation on Metallic Substrates</li><li>Mechanical Behavior of Innovative Reinforced Aluminum Foam Panels</li><li>Recycling of Powders from Cutting of Medium Density Fiberboard</li><li>Impact of Die Coatings on Forming Conditions in Electromagnetic Embossing of Thin Sheet Metal</li><li>Evaluating the Corrosion Resistance of Inconel 625 Coatings, Processed by Compact Plasma Spray, for Applications in Concentrating Solar Power Plants</li><li>Thermal Barrier Coatings (TBCs) Produced by Air Plasma Spray: Repair by Grinding and Waterjet (WJ) Processes</li><li>Friction Stir Welding of Thin Sheets of the AA2024-T3 Alloy with a Ceramic Tool: RSM and ANOVA Study</li><li>Influence of the Laser Welding Direction of Thin DP600 and the Residual Stresses Relaxation Obtained by Simulation and Neutron Diffraction</li><li>Special Features of the Non-Conventional Cutting (ECM, EDM) of Wool-Like Material Structures</li><li>Evaluation of the Rheological Behaviour of Magnetorheological Fluids Combining Bulge Tests and Inverse Analysis</li><li>Bond Strength of Co-Bonded Thermoplastic Leading Edge Protection (LEP): The Effect of Processing-Driven Interphase Morphology</li><li>CNT/2009Al Aluminum Matrix Composite Sheet Forming for a V-Shaped Skin Part</li><li>Numerical Analyses of Deformation Mechanisms in a Novel Dimensional Calibration Technique for Thin-Walled, Open Extrusions</li><li>Investigation of the Forming Behavior of Copper Wires for the Compaction of Windings for Electric Machines</li><li>Chapter 12: Polymers Processing and Thermomechanical Properties</li><li>Comparison of Conventional and Conformal Cooling Channels in the Production of a Commercial Injection-Moulded Component</li><li>Observations of Polymer Foam Development during Rotational Moulding</li><li>Numerical Simulation of Recycled PET Preforms Infrared Heating Including Force Convection Effect in the Industrial ISBM Ovens</li><li>Rapid Heat Control for Thermoplastic Injection Tooling Using Lattice Structures as Heat Exchanger</li><li>Towards a Holistic Approach for an Efficient Determination of the Rheological Behavior of Sheet Molding Compounds for Process Simulation</li><li>Role of Viscosity on Optimum Polymer-Fibre Interaction during Rotational Moulding Sintering</li><li>A Two-Temperature Model Based on Fin-Approximation for Transient Longitudinal Heat Transfer in Unidirectional Composite</li><li>Numerical and Experimental Study of Polymers Microwaves Heating</li><li>Measurement and Analysis of Deformation Behavior of Polyethylene Tube Subjected to Linear Loading and Unloading Stress Paths with Large Strain</li><li>Measurement of Biaxial Deformation Behavior and Material Modeling for HI-PVC Using Multiaxial Tube Expansion Test</li><li>A New Solution for Viscosity Identification in a Polymer Production Line via Convection Analysis</li><li>Chapter 13: Materials Behaviour Modelling</li><li>Characterization and Modelling of Sheet Material with Graded Strength for more Accurate Finite Element Analysis</li><li>Combined Probabilistic Approach and Stress State Dependency on the Failure Modeling of HPDC Aural-2 Alloy</li><li>Damage Analysis of Hybrid Composites Under Multi-Impact Loads: An Experimental and Numerical Study</li><li>Numerical and Experimental Investigations on the Mechanical Properties of Milled Specimens from an AA7020 Tube</li><li>Numerical Investigation of Al-Reinforced CFRP Composite under Low-Velocity Impact</li><li>Establishment of Thermal Deformation Constitutive Equation of TA15 Titanium Alloy</li><li>Influence of the Grain Boundary Curvature Model on Cellular Automata Static Recrystallization Simulations</li><li>Fracture Prediction of Third Generation Advanced High Strength Steels Using Hosford-Coulomb Damage Model</li><li>On Considering the Influence of Kinematic Hardening in Finite Element Simulation of Hot Levelling of Structural Steel Heavy Plates</li><li>Periodic Homogenization in Crystal Plasticity: A Comparative Study between 3D and 2D</li><li>Work Hardening of Metallic Sheets under Tension-Compression and Simple Shear Reverse Loading</li><li>A Model to Construct and Predict Flow Curve of Materials from Compression Test Results with Machine Learning Models Using Python</li><li>Intelligent Iterative Experimental Design to Achieve Maximum Model Quality for Phase Change of 22MnB5</li><li>Estimation of the Effective Magnetic Properties of Two-Phase Steels</li><li>FE Crash Modeling of Aluminum-FRP Hybrid Components Manufactured by a Hybrid Forming Process</li><li>The Virtual Fields Method to Indirectly Train Artificial Neural Networks for Implicit Constitutive Modelling</li><li>Modelling the Effect of Barrier Layers on the Tensile Properties of Paperboard Materials for Liquid Packaging</li><li>Influence of Plastic Deformation on the Hydrogen Embrittlement Susceptibility of Dual Phase Steels</li><li>Fracture Characterization of Advanced High Strength Steel USS CR980XG3 Using Phase-Field Diffusive Approach in Ductile Solids</li><li>Crystal Plasticity Modeling of Al Alloy under Linear and Non-Linear Loading</li><li>Viscoplastic Self-Consistent (VPSC) Modeling for Predicting the Deformation Behavior of Commercial EN AW-7075-T651 Aluminum Alloy</li><li>Investigation on Homogeneous Modeling of Gyroid Lattice Structures: Numerical Study in Static and Dynamic Conditions</li><li>Chapter 14: Lionel Fourment MS on Optimization and Inverse Analysis in Forming</li><li>Error Estimation of the 3D Reconstruction of a Displacement Field from DIC Measurements</li><li>Extension of a Simulation Model of the Freeform Bending Process as Part of a Soft Sensor for a Property Control</li><li>On the Identification of Material Constitutive Model Parameters Using Machine Learning Algorithms</li><li>Variance-Based Sensitivity Analysis of the Biaxial Test on a Cruciform Specimen</li><li>Identification of Anisotropic Yield Functions Using FEMU and an Information-Rich Tensile Specimen</li><li>Data-Driven Derivation of Sheet Metal Properties Gained from Punching Forces Using an Artificial Neural Network</li><li>Calibration of the Elasto-Plastic Properties of Friction Stir Welded Blanks in Aluminum Alloy AA6082</li><li>Material Parameter Identification of Elastoplastic Constitutive Models Using Machine Learning Approaches</li><li>A Method for Benchmarking of FEM Packages for Multi-Stage Sheet Metal Forming Simulations</li><li>Identification of Swift Law Parameters Using FEMU by a Synthetic Image DIC-Based Approach</li><li>Integrated Thermomechanical Characterization of Metals Using the Virtual Fields Method</li><li>On the Design of a Heterogeneous Mechanical Test Using a Nonlinear Topology Optimization Approach</li><li>Parameter Identification of Swift Law Using a FEMU-Based Approach and an Innovative Heterogeneous Mechanical Test</li><li>Formability Assessment of Variable Geometries Using Machine Learning - Analysis of the Influence of the Database</li><li>Parameter Identification and Modeling of Hardening to Preserve Identical Predictions under Monotonic Loading</li><li>In-Process Monitoring of Springback in Industrial Bending Using a Laser Sensor-Based Method</li><li>Chapter 15: New and Advanced Numerical Strategies for Material Forming</li><li>Towards a Hybrid Twin Model to Obtain the Formability of a Car Body Part in Real Time</li><li>Reduced FFT-Based Simulation of a Mechanically Loaded Clustered Microstructure Using an Adaptive Set of Fourier Modes</li><li>Numerical Investigation of Influence of Spot Geometry in Laser Peen Forming of Thin-Walled Ti-6Al-4V Specimens</li><li>Modelling of Ceramic Particle Motion during Semi-Solid Forming of Aluminium Matrix Composites via CFD-DEM Four-Way Coupling</li><li>Real-Time Quality Control in Thin Glass Forming Using Infrared Thermography and Deep Learning</li><li>Chapter 16: Sustainability on Material Forming</li><li>Fabrication of Billet from Aluminum Alloys AA 2011-T3/7075 Chips through Friction Stir Consolidation</li><li>A Simulative Method for Studying the Bonding Condition of Friction Stir Extrusion</li><li>Analysis, Prediction and Reduction of Emissions in an Industrial Hot Forming Process Chain for the Manufacture of Sheet Metal Components</li><li>A Preliminary Investigation of Energy Consumption for Turning Ti6Al4V EBM Cylindrical Parts</li><li>Resistance Heating by Means of Direct Current for Resource-Saving CO<sub>2</sub>-Neutral Hot Stamping</li><li>Enabling Sustainability in Glass Optics Manufacturing by Wafer Scale Molding</li><li>Improvement of Package Properties with Formed Functional Surface Features</li><li>An Approach for an Innovative 3D Steel Strip Straightening Machine for Curvature and Saber Compensation</li><li>Innovative Assistance System for Setting up a Mechatronic Straightening Machine</li></ul>
