Engineering, Functional and Special Materials

<ul><li>Preface</li><li>Chapter 1: Properties and Treatment of Structural Metals</li><li>Microstructure and Hardness Properties of AISI 321 Stainless Steel Welded Joints with Different Filler Metal</li><li>Hardness and Toughness Investigation of ASSAB 705 Steel by Various Tempering Temperatures</li><li>Numerical Study of Predicting Forming Process Based on Different Hardening Models in Advanced High Strength Steel Sheets</li><li>Determination of Activation Energy for Static Recrystallization in Al-Mg-Si Alloys with Different Zr Contents</li><li>Hybridization Effect of Nickel-Zinc Coating on Carbon Steel for Service Life Improvement</li><li>Chapter 2: Polymers and Composites</li><li>Effect of Fiber's Size on Acoustic Absorption of Abaca Fiber/Epoxy Resin Composites</li><li>Effect of Hybridization of Ramie Fibers on the Vibrational and Damping Responses of Ramie/Glass/Epoxy Resin Composite Laminates</li><li>Tensile Strength of Abaca Fiber Reinforced Polymer Composite Fabricated by Press Method: Effect of Fiber Content and Fiber Orientation</li><li>Rheological Properties of Wood Plastic Composites Based on Polypropylene and Birch Plywood Residues - Sanding Dust</li><li>Preparation of Calcium Carbonate from Cockle Shells as Fillers in Natural Rubber</li><li>Chapter 3: Functional and Special Materials</li><li>Influence of Anti-Solvents on the Performance of Cesium Bismuth Iodide Perovskite Solar Cells</li><li>Modified Hybrid Catalyst of Fe₃O₄/Cellulose Nanocomposite-Base and their Potential Application as Dye Waste Adsorbent</li><li>Chapter 4: Materials in Road Construction and Buildings</li><li>Stabilization of High Sulfate-Saline Soil with Lime, Ground Granulated Blast Furnace Slag (GGBFS), and Basic Oxygen Furnace Slag (BOFS)</li><li>Theoretical Background of Self-Healing in Asphalt Concrete</li><li>Developing a Single-Specimen Technique for Low-Temperature R-Curve Determination of Asphalt Concrete Using a Modified Unloading Compliance Method</li><li>Use of Basic Oxygen Furnace Slag (BOFS) in Superpave Mix Design: BOFS Aggregate Properties</li><li>Low-Temperature Fracture Performance of Polymerized Sulfur Modified Asphalt Concrete Mixtures</li><li>Computer Simulation for Energy-Efficient Buildings Integrated with Developed Phase Change Material (PCM)</li><li>Inspection of Thermo-Mechanical Behavior on Sintered Fly Ash Aggregate in Pavement Quality Concrete</li><li>Influence of Fiber Content on the Flexural Strength and Physical Properties of Abaca Fiber-Cement-Gypsum Board</li><li>Degradation and Microstructure of Palmdate Fibers-High Performance Cementitious Boards Exposed to Aging Conditions</li></ul>