TMS 2015 144th Annual Meeting & Exhibition, Annual Meeting Supplemental Proceedings

1 - Cover [Seite 0]
2 - Title Page [Seite 4]
3 - Copyright Page [Seite 5]
4 - Table of Contents [Seite 6]
5 - Edited Proceedings [Seite 27]
5.1 - Advances in Solidification of Metallic Alloys Under External Fields [Seite 28]
5.1.1 - Application of Rotating Magnetic Field to Improve the Reinforcement Distribution, Electrical Conductivity and Mechanical Properties of Copper Matrix Composite [Seite 29]
5.1.2 - The Effect of Static Magnetic Field on the Length of Mushy-Zone of a Single-Crystal Nickel-Base Superalloy during Directional Solidification [Seite 35]
5.1.3 - Application of External Fields to the Development of Aluminum-Based Nanocomposite and Master Alloys [Seite 42]
5.1.4 - The Use of Alumina and Zirconia Nanopowders for Optimization of the Al-Based Light Alloys [Seite 48]
5.1.5 - Melt Flow and Grain Refinement in Al-Si Alloys Solidified Under the Influence of Applied Electric Currents [Seite 56]
5.1.6 - Solidification Structure Refinement of 2205 Duplex Stainless Steel by Pulse Magneto-Oscillation [Seite 62]
5.1.7 - Simulation of Solidification Process of Steel Ingot Under the Forced-Convection Condition [Seite 69]
5.1.8 - Grain Refinement of Pure Aluminum Under External Electromagnetic Field Treatment-Reviews and New Experimental Evidence [Seite 76]
5.1.9 - In Situ Synchrotron Radiography of Ultrasound Cavitation in a Molten Al-10Cu Alloy [Seite 82]
5.1.10 - The Solidification Structure Refinement of SWRCH22A Steel Billet Under Pulse Magneto-Oscillation Treatment [Seite 88]
5.1.11 - A Comparative Study on the Single Crystal Growth of CMSX-4 via the Vertical Bridgman and Vertical Bridgman with a Submerged Baffle [Seite 94]
5.1.12 - Removing Impurity Element of Copper from Pb-3%Cu Melt by Super Gravity [Seite 102]
5.1.13 - The Effect of Surface Pulsed Magneto-Oscillation on Solidification of Low Pressure Rotor 30Cr2Ni4MoV Steel [Seite 110]
5.2 - CALPHAD-Based ICME Research for Materials Genomic Design [Seite 117]
5.2.1 - Materials Genomic Design of Novel Alloys with CALPHAD Tools [Seite 118]
5.2.2 - Phase Field Simulation on Dendritic Growth in Pressurized Solidification of Mg-Al Alloy [Seite 126]
5.2.3 - Experimental Investigation of Zn-Zr Binary of Zr-Rich Part Phase Diagram [Seite 133]
5.2.4 - Thermodynamic Reassessment of BaO-YO1.5 System [Seite 140]
5.3 - Nanocomposites III [Seite 148]
5.3.1 - Environmental Degradation of Carbon Nanofiber Reinforced Syntactic Foams [Seite 149]
5.3.2 - Dislocation Structure of Cu/Nu (100) Semi-Coherent Interface and Its Role in Lattice Dislocation Nucleation [Seite 160]
5.3.3 - Sol-Gel/Hydrothermal Method for the Synthesis of Ultralong(NH4)2V6O16·1.5H2O Nanobelts [Seite 168]
5.3.4 - Effect of Distribution and Mechanical Properties of Aluminum Composite Reinforced with Nonmetallic Particles Fabricated by CGG Process [Seite 176]
5.4 - Novel Synthesis and Consolidation of Powder Materials [Seite 184]
5.4.1 - Fabrication of Diamond-WC-Based Cemented Carbide Composites by Microwave Sintering [Seite 185]
5.4.2 - Photocatalytic Degradation of Rhodamine B Over Dy-Doped TiO2 Film Synthesized Through Microwave Sintering [Seite 193]
5.4.3 - Using Energy Efficient Microwaves to Synthesize High Performance Energy Saving Magnesium (Nano) Composites [Seite 200]
5.4.4 - Continuous-Heating Ignition Testing of Hybrid Al-Ni-CuO Reactive Composites Fabricated by Ultrasonic Powder Consolidation [Seite 207]
5.4.5 - Effect of Matrix and Reinforcement Powder Types on Tensile and Wear Properties of TiB/Ti and TiC/Ti Composites Prepared by SPS [Seite 214]
5.4.6 - The Micro-Mechanical Behavior of Electron Beam Melted Ti-6Al-4V Alloy [Seite 222]
5.4.7 - Mechanical Properties of TiB-Reinforced Ti-6Al-4V Using Matrix Powders with Different Particle Sizes and Morphologies [Seite 230]
5.4.8 - Effect of TiO2 Doping on the Densification and Microstructure in High Pressure Sintering Nano Size ?-Al2O8 [Seite 238]
5.4.9 - Synthesis of Cement-Like Materials from Wastes by Solid-State Reaction and Solution Combustion Techniques [Seite 244]
5.4.10 - Influence of Magnetic Field on Dealloying of Al-15Fe Ribbons and Formation of Fe3O4 Octahedra [Seite 252]
5.5 - Polycrystalline Materials: Bringing Together Experiments, Simulations, and Analytic Theories [Seite 260]
5.5.1 - Modeling Microstructural Evolution during Recrystallization in Hot Rolled Structure [Seite 261]
5.5.2 - Impact of Grain Boundary Character on Faceting and Migration of Low Angle Boundaries and Grain Rotation: Experiments and Simulations [Seite 269]
5.5.3 - Self-Similar Grain Growth in Nanocrystalline Two-Dimensional Polycrystals and Thin Films [Seite 279]
5.5.4 - An Experimental and Numerical Study of Deformation Behavior of Steels in Biaxial Tensile Tests [Seite 289]
6 - Unedited Proceedings [Seite 299]
6.1 - 2015 Functional Nanomaterials: Energy and Sensing [Seite 300]
6.1.1 - Solar Energy Capture: Methods of Optimizing Nanofluid-Based Volumetric Solar Flow Receivers [Seite 301]
6.1.2 - Energy Storage Utilizing Advanced CVD Nanodiamond Technology [Seite 309]
6.1.3 - A Statistical Optimization of Co/Pd Multilayers Patterned via Block Copolymer Lithography [Seite 316]
6.1.4 - Synthesis and Characterization of Amorphous Silicon Nitride Nanoparticals and ?-Silicon Nitride Nanowires [Seite 324]
6.1.5 - Nanocrystalline Sm-Fe Based Alloys: Structural and Magnetic Properties [Seite 331]
6.1.6 - Structural and Magnetic Properties of Fe55Co45 Nanoparticles Synthesized by Different Methods [Seite 336]
6.1.7 - Effects of Porous Carbon and CNTs on the Discharge Performance of Li-Air Batteries [Seite 341]
6.1.8 - Effects of the Additive on Performance of Alkali Electrolyte Solution [Seite 349]
6.1.9 - CPP-GMR of Multilayered Nanowires Electrodeposited into Anodized Aluminum Oxide Nanochannel Filters Mechanically Exfoliated from Metallic Aluminum Rods [Seite 357]
6.1.10 - Semiconductor Properties of ZnTe Thin Films Electrodeposited from Aqueous Solutions [Seite 363]
6.1.11 - Preparation and Characterization of Platinum Nanowires by Template-Assisted AC Electrodeposition [Seite 369]
6.1.12 - Contribution to the Study of the Dielectric Properties of WO3 Thin Films: Effect of Oxygen Adsorption [Seite 377]
6.2 - Additive Manufacturing: Interrelationships of Fabrication, Constitutive Relationships Targeting Performance, and Feedback to Process Control [Seite 382]
6.2.1 - A New and Efficient Multi-Scale Simulation Architecture for Prediction of Performance Metrics for Parts Fabricated Using Additive Manufacturing [Seite 383]
6.2.2 - DMLS Process Modelling & Validation [Seite 391]
6.2.3 - Aspects of the Process and Material Relationships in the Selective Laser Melting of Aluminium Alloys [Seite 399]
6.2.4 - Stress Rupture Behavior of P91-AISI 304 Weld Transition Joint Developed by Friction Surfaced Additive Manufacturing Method [Seite 407]
6.2.5 - Transition Microstructures and Properties in the Laser Additive Manufacturing Repair of Monel K-500 (UNS N05500) and Toughmet 3AT (UNS C72900) [Seite 415]
6.2.6 - Microstructural Analysis and Mechanical Evaluation of Ti-45Nb Produced by Selective Laser Melting towards Biomedical Applications [Seite 423]
6.2.7 - Automated Multi-Scale Microstructure Heterogeneity Analysis of Selective Electron Beam Melted TiAl6V4 Components [Seite 431]
6.2.8 - Integration of Deformation Processing with Additive Manufacture of Ti-6Al-4V Components for Improved ? Grain Structure and Texture [Seite 439]
6.2.9 - Production and Properties of a Wire-Arc Additive Manufacturing Part Made with Friction Extruded Wire [Seite 447]
6.2.10 - The Effect of Substrate Temperature on Properties of RPA Deposited Maraging 250 for Tooling Repair [Seite 455]
6.2.11 - Microstructures of Inconel 718 by Selective Laser Melting [Seite 463]
6.3 - Advanced Characterization Techniques for Quantifying and Modeling Deformation Mechanisms [Seite 471]
6.3.1 - High Throughput Femtosecond-Laser Machining of Micro-Tension Specimens [Seite 472]
6.3.2 - Study on Tensile Behaviors of Al-Killed Steel Under Batch-Annealed and Continuous-Annealed Conditions [Seite 480]
6.3.3 - Construction of Representative Volume Element for Fe Simulation of Bulk Deformation of Stainless Steel Using X-Ray Computed Tomography Approach [Seite 485]
6.3.4 - Deformation Twinning Behavior in Precipitate Strengthened Cu-Ni-Si Alloys [Seite 491]
6.4 - Advanced Materials in Dental and Orthopedic Applications [Seite 497]
6.4.1 - Influence of Testing Environment on the Degradation Behavior of Magnesium Alloys for Bioabsorbable Implants [Seite 498]
6.4.2 - Surface Treatment of Ti-45Nb Open Porous Structures towards Biomedical Applications: A Modified Approach [Seite 506]
6.4.3 - Titanium Anodic Oxidation: A Powerful Technique for Tailoring Surfaces Properties for Biomedical Applications [Seite 514]
6.4.4 - Tribocorrosion Studies on Surface Modified Medical Grade Stainless Steel [Seite 520]
6.4.5 - Deposited Layer Thickness and the Corrosion Resistance Behavior of 316L Stainless Steel by Ti Coated [Seite 528]
6.4.6 - Elastic Modulus of Oxidized Ti-Nb Alloys [Seite 534]
6.5 - Advances in Thin Films for Electronics and Photonics [Seite 541]
6.5.1 - Role of Complex Energy Landscapes and Strains in Multiscale Inhomogeneities in Perovskite Manganites [Seite 542]
6.5.2 - Role of Electric Field, Defects and Radiation Damage in Determining Reliability in AlGaN/GaN High Electron Mobility Transistors [Seite 550]
6.5.3 - E-Beam Induced Effects in Ge-Se Based Redox Conductive Bridge Memory Devices and Thin Films [Seite 564]
6.5.4 - Effect of Electric Field Intensity on Atom Diffusion in Cu/Ta/Si Stacks [Seite 572]
6.6 - Alloys and Compounds for Thermoelectric and Solar Cell Applications III [Seite 579]
6.6.1 - Optical Parameters of Spray-Deposited CdS: In Thin Films [Seite 580]
6.6.2 - Thickness Dependence of the Optical Parameters of Spray-Deposited SnO2: F Thin Films [Seite 588]
6.6.3 - Transport Properties of ABX Type Thermoelectric Alloys [Seite 596]
6.6.4 - Process Scalability for Promising Si Based Thermoelectric Materials [Seite 607]
6.6.5 - Phase Stability of Thermoelectric Alkaline Earth Metal Borides and Silicides [Seite 616]
6.7 - Biological Materials Science Symposium [Seite 627]
6.7.1 - Biochemical Characterisation of the Leaf of Morinda Lucida: Prospects for Environmentally-Friendly Steel-Rebar Corrosion-Protection in Aggressive Medium [Seite 628]
6.7.2 - Preliminary In-Vitro Study of Surface Alterations of Subcutaneous Venous Access Ports Exposed to Antineoplastic Drugs and Whole Blood [Seite 636]
6.7.3 - Adhesion of Blood Platelets in TiO2 Coatings [Seite 644]
6.7.4 - Adhesion of Anodic Titanium Dioxide Coatings on Titanium Grades 5 Alloys [Seite 652]
6.8 - Bulk Metallic Glasses XII [Seite 658]
6.8.1 - Bulk Metallic Glass: A Superior Erosion and Cavitation Resistant Material [Seite 659]
6.8.2 - Correlation between Dynamics and Atomic Structures in Cu-Zr Metallic Glasses [Seite 668]
6.9 - Computational Modeling and Stochastic Methods for Materials Discovery and Properties [Seite 676]
6.9.1 - Computer Simulation of Martensite Spread: A Stochastic Approach [Seite 677]
6.9.2 - Quantifying Experimental Characterization Choices in Optimal Learning and Materials Design [Seite 684]
6.9.3 - Cantilever Box-Beam Application of Composite Stacking Sequence Optimization Using Adaptive Genetic Algorithm [Seite 692]
6.9.4 - First-Principles Phase Stability Calculations of Zr3Al1-xNbx Alloyswith L12, and DO? Structures [Seite 700]
6.9.5 - ReaxFF Molecular Dynamics Simulation on Oxidation Behaviors of 3C-SiC: Uniaxial Strain Effect [Seite 707]
6.9.6 - Effect of Characteristics on Elastic Modulus of Porous Titanium by Numerical Simulation [Seite 712]
6.9.7 - Numerical Analysis for Temperature Field and Thermal Stress of Side Dam with Composite Structure on Twin Roll Strip Casting [Seite 720]
6.9.8 - Numerical Simulation for the Mixing Process of Converter with Preheating Oxygen [Seite 728]
6.9.9 - Modelling Rhizophora Mangle L Bark-Extract Effects on Concrete Steel-Rebar in 0.5 M H2SO4: Implications on Concentration for Effective Corrosion-Inhibition [Seite 736]
6.10 - Computational Thermodynamics and Kinetics [Seite 744]
6.10.1 - Elements Oxidation during Kinetic Behaviors of Vanadium-Extraction Process in 70T Converter [Seite 745]
6.10.2 - Numerical Sumulation of Desulfurization Behavior in Gas-Stirred Ladles [Seite 754]
6.10.3 - Numerical Analysis on the Multi-Physics Field in the ESR System with Vibrating Electrode [Seite 765]
6.10.4 - Modeling of Ferrite-Austenite Phase Transformation [Seite 773]
6.10.5 - A Mechanistic Study of the Interaction among C, N and Ti3O5(100) Surface Based on Density Functional Theory [Seite 781]
6.10.6 - Replica-Exchange Wang-Landau Sampling: Pushing the Limits of Monte Carlo Simulations in Materials Sciences [Seite 793]
6.10.7 - Molecular Dynamics Study of Structural and Transport Properites of FeO-SiO2-V2O3 System [Seite 801]
6.10.8 - Study on the Mechanism of Sulfur Compound Precipitates of Non-Oriented Silicon Steel [Seite 809]
6.10.9 - Application of MIVM for Cu-Ni Alloy in Vacuum Distillation [Seite 815]
6.10.10 - A Modified Random Pore Model for Gasification Kinetics of Coal Char and Biomass Char [Seite 823]
6.10.11 - Catalytic Effect of Fe2O3, MnO2 and MgO on the Gasification Reactionof Biomass Char [Seite 831]
6.10.12 - Study of Combustion Property of Biomass Char/Coal Char Blended Char Based on Isothermal Thermo-Gravimetry in O2/N2 Atmospheres [Seite 837]
6.10.13 - Solid-Like Clusters in Supercooled Liquid Fe: A Study of Molecular Dynamics Simulation [Seite 845]
6.10.14 - Crystallization in Supercooled BCC-Vanadium, HCP-Zinc and FCC-Aluminum [Seite 852]
6.10.15 - Portland Cement Clinker Formation: High Temperature Equilibria and Phase Composition Prediction [Seite 859]
6.10.16 - Thermodynamic Analysis for Formation of Ti(C,N) in Blast Furnace and Factors Affecting TiO2 Activity [Seite 867]
6.10.17 - Dissipative Particle Dynamics Simulation of the Rheology of Solid-Liquid Coexistence System in BF Slag [Seite 874]
6.10.18 - Strengthen Reduction Process of Vanadium Titano-Magnetite Adding NaF Under High Temperature [Seite 882]
6.10.19 - The Kinetics Test of Vanadium-Titanium Magnetite Iron Ore in Smelting Reduction [Seite 891]
6.11 - Constitutive Response and Modeling of Structural Materials: An SMD Symposium in Honor of G.T. Gray III's 60th Birthday [Seite 897]
6.11.1 - A Yield Surface for HCP Materials Undergoing a Wide Range of Loading Conditions [Seite 898]
6.11.2 - Effects of Microstructural Anisotropy on the Mechanical Properties of Aluminum Alloy AA 7010 - T7651 [Seite 905]
6.11.3 - Comparison of a New Sin-Hyperbolic Creep Damage Constitutive Model with the Classic Kachanov-Rabotnov Model Using Theoretical and Numerical Analysis [Seite 913]
6.11.4 - Micro-Crack Initiation in High-Silicon Cast Iron during Tension Loading [Seite 922]
6.11.5 - Microstructure-Based Constitutive Model for Yield Strength and Strain Hardening of 5XXX-Series Aluminum Alloys after Non-Isothermal Fire Exposure [Seite 929]
6.11.6 - Investigation on Tensile Property and Constitutive Relationship for As-Quenched Al-5%Cu-0.4%Mn Alloy [Seite 937]
6.11.7 - Physical Based Constitutive Model for the Prediction of Plastic Deformation of Fe-Cr-Ni Stainless Steel Under High Strain Rate [Seite 945]
6.12 - Development of "Weak Links" during the Processing of Metallic Materials [Seite 953]
6.12.1 - Effect of Zr Addition on Recrystallization Behavior in Rolled Ti-Zr Alloys [Seite 954]
6.13 - Fatigue in Materials: Fundamentals, Multiscale Modeling, Life Prediction and Prevention [Seite 962]
6.13.1 - Damage Behaviors at Twin and Grain Boundary in Alloy 690 Material in Very High Cycle Fatigue Regime [Seite 963]
6.13.2 - Low Cycle Fatigue of Aluminum-Silicon Alloys for Power-Train Applications [Seite 971]
6.13.3 - Fatigue Life Predictions for Irradiated Stainless Steels [Seite 979]
6.13.4 - High-temperature-High Pressure Stress-Strain Testing of Materials in CO2-Containing Saline Solutions [Seite 987]
6.13.5 - Linkage between Ductile Fracture and Extremely Low Cycle Fatigue of Inconel 718 Under Multiaxial Loading Conditions [Seite 995]
6.13.6 - Fracture Toughness of Welded Thick Section High Strength Steels and Influencing Factors [Seite 1003]
6.14 - Fundamental Methods for Integrating Microstructure-Property-Design Relationships into the ICME Paradigm [Seite 1011]
6.14.1 - Generation of Synthetic FRP Microstructures Based on Experimentally Observed Microstructures [Seite 1012]
6.14.2 - Statistical Analysis of Failure in Polymer Matrix Composites [Seite 1019]
6.14.3 - The Multi-Scale Closed Chain of Simulations - Incorporating Local Variations in Microstructure into Finite Element Simulations [Seite 1027]
6.15 - General Poster Session [Seite 1035]
6.15.1 - Effect of Cu Addition on Microstructures for Ti(C,N)-Mo2C-Ni [Seite 1036]
6.15.2 - Study of Behavioral About the Decomposition Reaction of the Solid Solution KFe3(SO4)2-x(CrO4)?(OH)6 in Ca(OH)2 Media [Seite 1042]
6.15.3 - Alkaline Reactivity of Solid Solution of NH?-Na Jarosite with Arsenic [Seite 1050]
6.15.4 - Effect of Sintering Techniques on Mechanical Properties of WC-FeAl Composites [Seite 1059]
6.15.5 - Synergistic Effects of Nano-Fillers on Halogen-Free Fire Retardant Polypropylene Composites [Seite 1064]
6.15.6 - Use of Extract of Cupressus Goveniana for Synthesis and Stabilization of Nanoparticles Silver [Seite 1072]
6.15.7 - Synthesis of Bimetallic Nanoparticles Urchin-Like with Ricinus Communis Leaf Extract [Seite 1080]
6.15.8 - Effects on Combustion Process of Pulverized Coal Adding Biomass Char [Seite 1086]
6.15.9 - Coarsening of Decomposed Phases in Cu-Ni-Cr Alloys [Seite 1095]
6.16 - High Entropy Alloys III [Seite 1103]
6.16.1 - High-Throughput Synthesis and Characterization of Thin Film High Entropy Alloys Based on the Fe-Ni-Co-Cu-Ga System [Seite 1104]
6.16.2 - Structure and Properties of Some CoCrFeNi-Based High Entropy Alloys [Seite 1112]
6.16.3 - Effect of Annealing on Phase Composition and Microstructure of the CoCrFeNiMnVx (x=0, 0.25, 0.5, 0.75, 1) High Entropy Alloys [Seite 1121]
6.17 - High Performance Aerospace Alloys Design Using ICME Approach [Seite 1129]
6.17.1 - Effect of Boron Addition on Microstructure and Property of Low Cost Beta Titanium Alloy [Seite 1130]
6.17.2 - Progress in Structure-Property Modeling Tools for ?-TiAl [Seite 1136]
6.17.3 - Investigation on Microstructure and Properties of Ti-Al-Cr-Fe-V-Zr Alloy [Seite 1147]
6.18 - Materials and Fuels for the Current and Advanced Nuclear Reactors IV [Seite 1154]
6.18.1 - Pre-Conceptual Development and Characterization of an Extruded Graphite Composite Fuel for the Treat Reactor [Seite 1155]
6.18.2 - Hydrogen Embrittlement Testing of a Zirconium Based Alloy [Seite 1163]
6.18.3 - Validation and Numerical Simulation for Shrinkage Porosity of a X12 Steel Ingot [Seite 1169]
6.18.4 - Serrated Flow in 9-11Cr Ferritic/Martensitic Steels [Seite 1177]
6.18.5 - Characterization a Bending Fatigue Mini-Specimen Technique (Krouse Type) of Nuclear Materials [Seite 1185]
6.18.6 - Effect of Strain and Degree of Sensitization in TGSCC Susceptibility of Stainless Steel in High Temperature [Seite 1193]
6.19 - MHD 2015: Nagy El-Kaddah Memorial Symposium on Magnetohydrodynamics (MHD) in Materials Processing [Seite 1211]
6.19.1 - Prediction of Inclusions Distribution in a Steel Continuous Casting Slab with FC-Mold [Seite 1212]
6.19.2 - 3D Mathematics Model of Formation and Motion of Metal Droplets during Electro-Slag Remelting Process [Seite 1221]
6.20 - Micromechanics of Structurally Inhomogeneous Materials: An FMD Symposium in Honor of Armen Khachaturyan [Seite 1229]
6.20.1 - A Micromechanical Model for Hygrothermoelastic Heterogeneous Materials [Seite 1230]
6.20.2 - Numerical Investigation of the Interaction Between the Martensitic Transformation Front and the Plastic Strain in Austenite [Seite 1238]
6.21 - Multiscale Microstructure, Mechanics and Prognosis of High Temperature Alloys [Seite 1246]
6.21.1 - Real Time In Situ X-Ray Diffraction Study of the High Temperature Mechanical Behavior of a Rafted Single Crystal Superalloy [Seite 1247]
6.21.2 - Experimental Investigation on Plastic Strain and Recrystallization of Single Crystal Nickel Based Superalloys [Seite 1255]
6.22 - Nano- and Micro-Mechanical Measurements in Harsh Environments [Seite 1263]
6.22.1 - Effect of Gamma Radiation on the Mechanical and Degradation Properties of Bromobutyl Rubber Compounds [Seite 1264]
6.23 - Nanostructured Materials for Rechargeable Batteries and for Supercapacitors III [Seite 1272]
6.23.1 - Preparation, Process Optimization and Performance of LiNi1/3Mn1/3Co1/3O2 Coin-Type Lithium Ion Battery [Seite 1273]
6.23.2 - Nanocomposite Sodium Transition Metal Phosphate Prepared via Combustion Route for Hybrid Capacitor [Seite 1278]
6.24 - Neutron and X-Ray Studies of Advanced Materials VIII: Diffraction Limit and Beyond [Seite 1289]
6.24.1 - Application of Energy Dispersive PnCCD Detector in Material Science Using Hard X-Rays [Seite 1290]
6.24.2 - Phase Transformation in a High Flux Magnetic Field [Seite 1296]
6.25 - Pb-Free Solders and Emerging Interconnect and Packaging [Seite 1303]
6.25.1 - Thiol-Based Self-Assembled Monolayers (SAMs) as an Alternative Surface Finish for 3D Cu Microbumps [Seite 1304]
6.26 - Phase Transformations and Microstructural Evolution [Seite 1310]
6.26.1 - Effect of Two Free Dendritic Growth Models on the Simulation of Microstructure Formation in Solidification Process of Fe-0.4wt.%C Alloy [Seite 1311]
6.26.2 - Research on Non-Directional Solidification Process of AISI 301 Austenite Stainless Steel [Seite 1319]
6.26.3 - Ostwald's Step Rule in the Crystallization of Supercooled Magnesium from Molecular Dynamics Simulation [Seite 1327]
6.26.4 - Analysis of Phase Decomposition in Fe-Cr Alloys by Diffusion Couples [Seite 1335]
6.26.5 - Effect of Heat Treatment on Microstructures and Tensile Properties of a Fe-1.7Mn-1.3Al-0.5C Steel [Seite 1342]
6.26.6 - Importance of Interfacial Energy in Precipitation Modeling Using Computational Thermodynamics Techniques [Seite 1356]
6.26.7 - A Study of Microstructure and Phase Transformations of Medium-Carbon Dual-Phase Steels [Seite 1364]
6.26.8 - Effect of Annealing Temperature on Martensite Start Temperature in Intercritical Region [Seite 1371]
6.26.9 - Phase Field Modeling of Microstructural Evolution during Intermediate Quenching and Intercritical Annealing of Medium-Carbon Dual-Phase Steels [Seite 1379]
6.26.10 - Peritectoid Phase Transformations in Ni3Mo Alloy [Seite 1387]
6.26.11 - Experimental Study and Modelling on the Grain Growth of Annealing Process in Fe-50%Ni Alloy [Seite 1395]
6.26.12 - Phase Transition Research on Fe-2Mn Alloy Powders Prepared by Gas Atomization [Seite 1402]
6.26.13 - Universal Scaling Behaviour of Subgrain Size Evolution in Face-Centered Cubic Metals with Moderate to High Stacking Fault Energy [Seite 1409]
6.27 - Recent Developments in Biological, Structural and Functional Thin Films and Coatings [Seite 1417]
6.27.1 - Refractory Thin-Films Derived from Organometallic Polymers [Seite 1418]
6.27.2 - The Microstructural and In Vitro Characterics of Hydroxyapatite Coating Fabricated Using Nd-YAG Laser [Seite 1422]
6.27.3 - Autocatalytic Ni-P and Ni-B Deposition on SiC Ceramic Particles [Seite 1436]
6.27.4 - Ultra-Fast Boriding and Surface Hardening of Low Carbon Steel [Seite 1442]
6.27.5 - The Influence of Mn on the Interfacial Reaction for Hot-Dipping 55Al-Zn-1.6Si/Iron [Seite 1450]
6.27.6 - Preparation of BaCo0.7Fe0.2Nb0.1O3-? Asymmetric Tubular Oxygen Permeable Membrane by Dip-Coating and Co-Sintering Process [Seite 1458]
6.27.7 - Substrate - Enamel Interface Relation and Impact on Quality of Enamel [Seite 1466]
6.28 - Refractory Metals 2015 [Seite 1474]
6.28.1 - Effect of Titanium and Chromium on the Microstructure of Tungsten-Manganese Alloys Prepared by Mechanical Alloying [Seite 1475]
7 - Author Index [Seite 1483]
8 - Subject Index [Seite 1490]