Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 5 of the Proceedings of the 2018 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the fifth volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including:
Recycled Constituent Composites
Nanocomposites
Mechanics of Composites
Fracture & Fatigue of Composites
Multifunctional Materials
Damage Detection & Non-destructive Evaluation
Composites for Wind Energy & Aerospace Applications
Computed Tomography of Composites
Manufacturing & Joining of Composites
Novel Developments in Composites.
Auflage
Sprache
Verlagsort
Editions-Typ
Dateigröße
ISBN-13
978-87-438-0574-8 (9788743805748)
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Klassifikation
Piyush R. Thakre, Dow Chemical Company, Lake Jackson, USA. Raman P. Singh, College of Engineering, Architecture & Technology, Oklahoma State University, Stillwater, USA. Geoffrey Slipher, United States Army Research Laboratory, Adelphi, USA.
Preface 1 Stimulus-Responsive Interfacial Chemistry in CNT/Polymer Nanocomposites 2 Devulcanized Rubber Based Composite Design Reinforced with Nano Silica, Graphene Nano Platelets (GnPs) and Epoxy for "Aircraft Wing Spar" to Withstand Bending Moment 3 Study of Mechanical Characteristics of Banana and Jute Fiber Reinforced Polyester Composites 4 Toughening Mechanism in Epoxy Resin Modified Recycled Rubber Based Composites Reinforced with Gamma-Alumina, Graphene and CNT 5 AlSi10Mg Nanocomposites Prepared by DMLS Using In-Situ CVD Growth of CNTs: Process Effects and Mechanical Characterization 6 Optimization of Surface Integrity of Titanium-Aluminum Intermetallic Composite Machined by Wire EDM 7 Design of Cost Effective Epoxy + Scrap Rubber Based Composites Reinforced with Titanium Dioxide and Alumina Fibers 8 Reinforcement of Recycled Rubber Based Composite with Nano-Silica and Graphene Hybrid Fillers 9 Testing the 2-3 Shear Strength of Unidirectional Composite 10 Nondestructive Damage Detection of a Magentostricive Composite Structure 11 Thermo-Mechanical Properties of Thermoset Polymers and Composites Fabricated by Frontal Polymerization 12 Design of Magnetic Aluminium (AA356) Composites (AMCs) Reinforced with Nano Fe3O4, and Recycled Nickel: Copper Particles 13 Reinforcement Effect of Nano Fe3O4 and Nb2Al on the Mechanical and Physical Properties of Cu-Al Based Composites 14 Recycled Ti-17 Based Composite Design; Optimization Process Parameters in Wire Cut Electrical Discharge Machining (WEDM) 15 Alternative Composite Design from Recycled Aluminum Chips for Mechanical Pin-Joint (Knuckle) Applications 16 Manufacturing of Copper Based Composites Reinforced with Ceramics and Hard Intermetallics for Applications of Electric Motor Repair Parts 17 Damping and Toughening Effect of the Reinforcements on the Epoxy Modified Recycled + Devulcanized Rubber Based Composites 18 Impact and Post-impact Behavior of Composite Laminates Reinforced by Z-Pins 19 Layered Jamming Multifunctional Actuators 20 2D Microscale Observations of Interlaminar Transverse Tensile Fracture in Carbon/Epoxy Composites 21 Electro-Mechanical Response of Polymer Bonded Surrogate Energetic Materials with Carbon Nanotube Sensing Networks for Structural Health Monitoring Applications 22 Strength and Energy Absorption Capability of Porous Magnesium Composites Reinforced by Carbon Nanofibers 23 Mechanical Characterization of Open Cell Aluminum Foams Using X-ray Computed Tomography 24 Damage Detection and Visco-Elastic Property Characterization of Composite Aerospace Panels Using Ultrasonic Guided Waves 25 Microscale Investigation of Transverse Tensile Failure of Fiber-Reinforced Polymer Composites 26 Optimization of Kerf Quality During CO2 Laser Cutting of Titanium Alloy Sheet Ti-6Al-4V and Pure Titanium Ti 27 A Study of the Surface Integrity of Titanium Alloy Ti-6Al-4V in the Abrasive Water Jet Machining Process 28 Process Reliability of Abrasive Water Jet to Cut Shapes of the Titanium Alloy Ti-6Al-4V 29 Optimization of the High Energy Milling Process of Chips of a Stainless Steel Using the Response Surface Modeling 30 Iron Contents on Recycle Aluminum and Influence on Mechanical Properties 31 Experimental Comparison of the Microstructure and Surface Roughness in CO2 Laser Cutting of the Titanium Alloy Ti-6Al-4V and the Pure Titanium Ti 32 Influence of Crumb Rubber Reinforcement on the Properties of Medium Density Fiberboard 33 Sub-components of Wind Turbine Blades: Proof of a Novel Trailing Edge Testing Concept 34 Toughening Mechanisms on Recycled Rubber Modified Epoxy Based Composites Reinforced with Alumina Fibers 35 Toughening Mechanisms on Recycled Rubber Modified Epoxy Based Composites Reinforced with Graphene Nanoplatelets 36 Damage Accumulation in CMCs 37 Investigating Intralaminar Crack Growth in Biaxially Stressed Composites 38 Determination of Stress Free Temperature in Composite Laminates for Residual Stress Modeling 39 Calibration of a Simple Rate Dependent Elastic-Plastic Constitutive Model for a Toughened Carbon Epoxy Composite System 40 Imaging the Life-Cycle of CMCs Using High-Resolution X-Ray Computed Tomography 41 Effect of Process Induced Residual Stress on Interlaminar Fracture Toughness on Hybrid Composites 42 Analysis of Interfaces in AA7075/ Recycled WC Particles Composites Produced via Liquid Route 43 Investigation on Microstructure and Interfaces in Graded FE50007 / WC Composites Produced by Casting 44 In-Situ Imaging of Flexure-Induced Fracture in Fiber-Reinforced Composites Using High-Resolution X-Ray Computed Tomography.
