Actual Problems of Engineering Mechanics: Materials Science and Technologies

<ul><li>Preface</li><li>Chapter 1: Building Materials</li><li>Experimental Studies of Fiber-Reinforced Concrete Prisms Exposed to High Temperatures</li><li>Study and Comparison of Characteristics of Models of Hollow-Core Slabs, Reinforced Concrete and Steel-Fiber Concrete</li><li>Experimental Investigations of Concrete on Slag Portland Cement as a Coating Material for Agricultural Aerodromes</li><li>Decorative Concrete with the Addition of Highly Dispersed Organogenic Calcite (Chalk) in the Landscape Architecture of the Modern City</li><li>Frost Resistance of Decorative Composites of Different Composition</li><li>Fractal Model of the Influence of Expanded Clay Concrete Macrostructure on its Strength</li><li>Determination of Transition Stages of Structure Formation by Experimental Data</li><li>Modeling and Optimization of Technology and Physics-Mechanical Properties of Composite Materials</li><li>Laboratory Studies of the Heat-Insulating Properties of the Panels that Made of Recycled Rubber</li><li>The Effect of Silicate Fillers on Adhesion and Adhesion Strength Properties of Water-Based Coatings</li><li>Development of Methods for Determining the Term of Effective Exploitation of Thermal Insulation Materials for 100 Years</li><li>The Influence of the Structure on the Destruction Mechanism of Polymer-Cement Plaster Coating</li><li>Study of Pavements of Concrete Paving Blocks with Ribbed Underside Surface</li><li>Environmental Problems of Phosphogypsum Utilization</li><li>Corrosion Resistance of Polyester Powder Coatings Using Fillers of Various Chemical Nature</li><li>On the Question of the Application of Basalt Microfiber for Reinforcement of Thermal Insulation AAC</li><li>Modern Systems of Heat Insulation Buildings</li><li>Ensuring Strength of Fine Grained Concrete with Mixed Cement Binders</li><li>Research of Conditions of Removal of Fire Protection from Building Construction</li><li>Crack Resistance and Width of Crack Opening of Beams with Hybrid Reinforcement Using BFRP and Metal Armature</li><li>The Study of the Processes of Structure Formation in the System "Portland Cement-Carbon Nanotubes-Surfactant" from the Point of View of Physicochemical Mechanics of Dispersed Systems</li><li>Wood Science Characteristics of Timber from Pine Deadwood Trees (<i>Pinus sylvestris L.</i>)</li><li>Research of the Reasons of Frost Destruction of Road Concrete</li><li>Influence of Type of Alkaline Activator on Durability of Alkali Activated Concrete Using Aggregates Capable to Alkali-Silica Reaction</li><li>Chapter 2: Materials and Processing Technologies in Machinery</li><li>Role of Activation in Formation of Polymer Composite Properties</li><li>Investigation of Influence of Plasma Spraying Process Parameters on the Level of Residual Stresses</li><li>The Effect of the Deformation Method of the Billets on Mechanical Properties of Molybdenum Bars and Wire</li><li>Search for the Evaluation of 'strength-plasticity' Relation in Constructional Steel</li><li>Viscoelastic Resistance of the Surface Layer of Steel Products to Shock Attack of a Spherical Pellet</li><li>Analysis of the Bearing Capacity of Adhesive Joint of Honeycomb Cores of Sandwich Structures with the Continuous Adhesive Layer</li><li>Austenite Transformation Behavior and Mechanical Properties of Constructional V, Nb-Alloyed TRIP-Assisted Steel</li><li>Modeling the Optimal Composition of Structural Epoxy Composites Filled with Dispersed Metal Waste</li><li>Influence of Scale Factor on Structuring of Epoxy Polymer Products under the Action of Thermal Energy</li><li>Assessment of Hydroabrasive Wear Resistance of Construction Materials with Functional Coatings, which are Formed by Resource-Saving and Environmentally Friendly Technologies</li><li>Material Science Aspects of Alloy Modification by Nanocompositions of Plasma-Chemical Synthesis</li><li>Profitability of Production of Stainless Steel + Zirconium Metals Combination Adapters</li><li>High-Copper Cast Irons for the Products of Tribotechnical Applied</li></ul>