FarEastCon - Materials and Construction III

<ul><li>Preface</li><li>Chapter 1: Special and Functional Materials</li><li>Thermotropic Copolyesters Based on Polyethylene Terephthalate and 4-Hydroxybenzoic Acid for High Modulus Fibers</li><li>Influence of Microwave on the Structure and Properties of Nanomodified Fluoroplastic</li><li>Synthesis of 5-Hydroxymethylfurfural-Acetone Resins</li><li>Surface Carboxylation of a Boron-Carbon BC₅ Nanotube in the Development of Sensor Devices</li><li>Special Features of Formation of the High Damping State in Bimetallic Structural Materials Obtained by Explosion Welding</li><li>Features of Glass Plate Hardening by the Ion Exchange Method</li><li>Development of Titanium Implants with a Rough Calcium Phosphate Surface to Control the Morphofunctional State of Stem Cells</li><li>Investigation of the Thermal State of Parts to Justify the Possibility of Additive Forming of Nitinol Blanks <i>In Situ</i></li><li>Electrochemical Sensors Based on Noble Metal Nanoparticles in Voltammetry</li><li>Investigation of BaSO₄-KPO₃-Na₂B₄O₇ Low-Melting Glass System as a Basis for Synthesis of a Glass-Solder Material</li><li>Visualization of the Effect of an Impurity on the Optical Homogeneity of Lithium Niobate Doped with Boron Cations</li><li>Chapter 2: Polymers and Composites</li><li>Obtaining of Composite Alloys Based on Nickel Aluminides with Rare Metals</li><li>Research Investigation of Deformation Characteristics of Thin Polymer Films at Different Doses of Electron Irradiation</li><li>The Mechanism of Getting New Composite Polymer Materials with Improved Hardness Properties</li><li>Thermal Decomposition Characteristics of Poly((4-Vinylbenzyl) Trimethylammonium Bis (Trifluoromethanesulfonimide)) Studied by Pyrolysis-GS / MS</li><li>Towards a Strategy for the Synthesis of Polymeric Ionic Liquids with a Bulk Anion in Various Reaction Media</li><li>Development of Forming Method of Deployable Boom from Thermoplastic Polymer Composite</li><li>Effect of Wood Filler Concentration on Physical and Mechanical Properties of PLA-Based Composites</li><li>Investigation of the Staging of Damage Accumulation in Polymer Composite Materials during Bending and Tensile Tests</li><li>Oxidative Degradation of Polyethylene Filled with Nanosized Crushed Shells of Sea Oysters</li><li>Evaluation of the Influence of the Conditions of Catalytic Continuous Steam Explosive Activation of Wood on the Physical and Operational Properties of Wooded Composite Materials Based on Activated Fibers</li><li>Nanomodified Epoxy Materials with Improved Operating Characteristics</li><li>Physicochemical WPC Modification Techniques</li><li>Testing of Carbon Nanotubes and their Influence on the Physical and Mechanical Characteristics of Polyester Resin</li><li>Chapter 3: Materials and Technologies of Chemical Production</li><li>Fundamentally New Composite Materials of Fast Reactors Made on the Basis of Nanotechnology</li><li>Redox Behavior of Chelate Complexes Based on 8-Oxyquinoline Promising in OLED Display Technology</li><li>Purification of Zinc Oxide from Chlorides Using Microwave Radiation</li><li>Direct Synthesis of Titanium Nanoparticles by Induction Flow Levitation Technique</li><li>Polychelates Based on Magnesium, Aluminum, Iron, Zirconium, and Vanadyl Acetylacetonates - Synthesis, Structure and Properties</li><li>Optimization of the Choice of Technological Methods for Nanomodification of Natural Aluminosilicates through the Parameters of the Element-Oxygen Chemical Bond</li><li>Chapter 4: Properties and Processing Technologies of Steel and Alloys</li><li>Structure and Properties of Additive Hard Magnetic Alloys 25Cr15Co and Alnico</li><li>Microstructure-Impact Toughness Relationships in Quenched and Tempered Low Carbon Low Alloy Steels</li><li>Modern Technologies of Metal Processing in the Socio-Cultural Context</li><li>Mechanical and Corrosion Properties of VT6 Titanium Alloy after Irradiation with Helium and Aluminum Lons</li><li>Investigation of the Effect of Implantation of Aluminum Alloys by Gas and Metal Ions on the Structure and Phase Composition of the Implanted Layer</li><li>Research of Properties of Austenitic Steels</li><li>Elasticity Modulus and Hardness of Bearing Steel after Laser Treatment</li><li>Amorphous Alloys Atomic Structure Investigation by Means of Electron Microscopy and Diffraction</li><li>Development of Combined Rolling-Extruding Modes for Producing Longish Deformed Semi-Finished Products from Aluminum Alloy with Low Cerium Content</li><li>Influence of Structure and Dispersivity of Copper on its Melting Features</li><li>Features of Structural-Phase Transformations during Oxidation of Metals with Bulk Submicrocrystalline Structure and Fine Metal Powders</li><li>Channel Angular Pressing of the Annular Metal Billet</li><li>Grinding of Titanium Alloys</li><li>Features of the Structure of the Material Formed from AK4-1 Powder Using Laser Energy</li><li>Experimental and Analytical Assessment of the Power Parameters of the Combined Rolling-Extruding Process Using a Round Billet from Alloy 01417 Obtained Using an Electromagnetic Mold</li><li>Chapter 5: Tribology, Coatings and Surface Engineering</li><li>Features of the Formation of Structure and Geometry during Direct Laser Deposition of 321L Stainless Steel on Complex Groove Using the LENS Method</li><li>Study of the Impact of Protective Process Agents with Carbon Nanopowder Additives on Chip Forming Processes</li><li>Kinetic Characteristics of Electrodeposition of Ni-Co-Al₂O₃Composite Coating</li><li>Chemical Processes in PEO Coatings Formation and Destruction on Titanium Alloy VT-1</li><li>Improving the Tribological Properties of Ceramic Dies</li><li>Heat Treatment of the Surface of the ChS57 Alloy with Powerful Nanosecond Ultraviolet Laser Pulses</li><li>Metallographic and Eddy Current Study of Boride Strengthening Coatings</li><li>The Effect of Surface Conditions on Corrosion Resistance of a Cobalt-Chromium Alloy</li><li>On the Issue of Laser Selective Removal of Paint Coating from a Sample of Metal Plating of Aircraft Gliders</li><li>Structural-Mechanical Properties of Polyurethane Surface after Carbon Ion Subplantation</li><li>The Effect Covering on the Change in the Properties of Hard Alloys</li><li>Impact of Nanodispersed Diamond Graphite Additive on Metal Cutting Temperature</li><li>Precast Textured Tool and the Construction of an Intensive Grinding Process Based on It</li><li>Chapter 6: Materials and Technologies in Construction</li><li>Studies of the Influence of Graphite on the Physical Mechanical and Thermal Properties of Polyurethane Foams for Construction Applications</li><li>On the Durability of Concrete under the Action of Ultra-Low (up to -196 degreesC) Technological Temperatures</li><li>Cement Building Materials with Powdered Optical Discs as a Filler</li><li>Effective Fine Concrete Modified with a Highly Dispersed Wollastonite-Based Additive</li><li>Modified Gypsum Binder for Plastering Systems</li><li>Thermal Changes in the Mass, Size and Density of Steel Fiber Concrete after Calefaction</li><li>Use of Bacterial Carbonatogenesis to Increase the Strength of Cement Solutions with the Help of Microorganisms</li><li>Building Systems Based on Foamed Modified Polymers</li><li>The Influence of Ferrous Metallurgy Waste in the Aktobe Region on the Frost Resistance of Ceramic Bricks Based on Low-Melting Clay</li><li>Assessment of the Impact of High Temperature on the Strength of Reinforced Concrete Structures during Operation</li><li>Investigation of the Rate of Vacuum-Conductive Drying of Wood-Particle Panels Based on Polyvinyl Alcohol</li><li>Effect of Cement Paste Preparation Procedure and Cement Stone Age on its Phase Composition</li><li>Unused Plant Waste and Thermal Insulation Composition Boards on their Basis</li><li>Sulfide Technology Based on Sulfur Waste Product of Coke Production</li><li>Filled Heat Efficient Ceramics</li><li>Theoretical Assessment of the Prospects for the Use of Raw Materials in Ceramic Production</li><li>Polymer-Bitumen Binders Compositions Selection by Using the Experimental Planning Method</li><li>The Use of Waste from the Processing of Copper-Zinc Concentrates of the East Kazakhstan Region in the Production of Non-Fired Refractory Composites</li><li>Analysis of the Quality of Quartz-Feldspar Sand as a Component of a Composite Binder</li><li>Influence of Fillers on Silicate Compositions Porization</li><li>Research of Physical and Mechanical Properties of Fly Ash Ceramics with SiO₂ and Al₂O₃ Nanoparticles as Functional Addition</li><li>Extreme Modelling of Concrete Optimal Composition and Content of the Components</li><li>Determination of the Chemical Composition of Corrosion Defects on the Inner Surfaces of Hollow Reinforced Concrete Structures</li><li>Chapter 7: Computational Procedures, Modelling and Numerical Simulation in Materials Science</li><li>System Analysis and Control of the Influence of a Mixed Type of Chemical Bond in Substances and Materials on their Structure and Properties</li><li>Modeling of the Process of Drying and Coalescing Nanodispersion Spreading</li><li>Finite-Element Simulation of Steckel Mill Rolling</li><li>Methodology for Calculating Heat Loss in the Study of Friction Stir Welding</li><li>Investigation of Surface-Functionalized CNT-Based Array for Detection of Acetone Vapors</li><li>Evaluation of Pozzolanic Activity of Metakaolin Chemometric Method According to the UV-VIS-NIR Spectroscopy</li><li>Effect of Initial Conditions and Numerical Investigation of Instability Developed during Synthesis of TiC via Vortex Combustion at Moderate Temperatures. Model of Vortex Combustion</li><li>Statistical Model of a Thin Film Formation</li><li>Finding the Specific Surface Area of an Organomineral Sorbent Produced by Electroplasma Treatment of Coal Flotation Waste</li><li>Generalized Susceptibility of Mixed Dislocation in Ferroelastics near Structural Phase Transition</li><li>Chapter 8: Deformation and Fracture Mechanics of Materials in Mechanical Engineering</li><li>The Influence of Technological and Operational Factors on the Durability of the Shafts of Air-Cooler Unit Electric Motors</li><li>Calculated Model of Endurance Limit Estimation Based on Structural-Strain Analysis of the Critical Condition of Ferrite-Perlite Steels with Macrocracks in Ship Structures</li><li>Shock Loading of Heteromodular Elastic Materials under Plane-Strain Condition</li><li>The Problem of Stretching a Hollow Cylinder</li><li>Investigation of Low-Cycle Fatigue on Structural Carbon Steel</li><li>Relieving of Residual Stresses in Metal Workpieces at High and Low Temperatures</li><li>Designing of Thin Composite Panels with the Post-Buckling Behavior Considering Rigid Support and Loading with Shear Flows</li><li>Chapter 9: Deformation and Fracture of Materials and Structure Elements in Construction</li><li>The Construction of the Diagrammatic Deformation Model for Calculating the Core Reinforced-Concrete Structures in Finite Increments under Joint Action of Load Increments and Variable by Cross Sections Low and Ultra Low Subzero Temperatures</li><li>Seismic Resistance of Nonlinearly Deformable Large-Span Spatial Structures, Taking into Account Changing Dynamic Stiffness</li><li>Deformation of Steel-Reinforced Concrete Round Thin Slabs Taking into Account the Compliance of the Support Contour</li><li>Behavior of Polygonal Shells of Complex Geometry, Taking into Account the History of a High Level of Loading</li><li>Dynamic Parameters of Prestressed Hanging Systems</li><li>On the Influence of Interlayer Nonuniformity on Contact Characteristics during the Interaction of a Pipe and a Rigid Cylindrical Insert</li><li>Strain-Stress Distribution of Structural Components from Foam Concrete for Monolithic Construction</li><li>Study of Nonlinear Stress-Strain Diagram of Concrete Based on Local Raw Materials in Central Yakutia</li></ul>