Materials in Machinery and Construction

<ul><li>Preface</li><li>Chapter 1: Steel and Alloys</li><li>Mechanical Properties and Microstructure of A356-T6 Aluminum Alloy Wheel Hub Based on Casting-Spinning Process</li><li>Effects of Tempering Temperature on the Microstructure and Mechanical Properties of Low Alloy Ultra-High Strength 45CrNiSiMnMoVA Steel</li><li>Research Progress of Effect of Heat Treatment on Microstructure, Phase Transformation Behaviors and Memory Properties in Ti-Ni Based Shape Memory Alloys</li><li>Chapter 2: Materials for Energy Storage, Electronics and Optoelectronics</li><li>Research Progress and Application of Modified Silicon-Based Anode Materials for Lithium-Ion Batteries</li><li>Synthesis of Self-Supporting ZnO Nanowire Array Film and its Optical Property and Room Temperature Ferromagnetism</li><li>Study on Spectral Structure and Photoelectric Properties of LED Healthy Light Source</li><li>Patterning Method for Nanowire Transparent Conductive Films</li><li>Research Progress in Silver Zinc Oxide Electrical Contact Material</li><li>Chapter 3: Nanomaterials and Composites</li><li>Research and Analysis of Graphene Coatings Based on Knowledge Mapping</li><li>Research on Purification Technology of Ultra-Large Flake Graphite Based on Alkali-Acid Method</li><li>Study on the Effect of Reduction Temperature on the Catalytic Activity of Fe-Mo/Al₂O₃ Catalyst and the Microstructure of Carbon Nanotubes</li><li>Preparation and Properties of Straw Fiber/Polylactic Acid Composites</li><li>The Influence of Fe/Al Molar Ratio on Microreactor-Based Catalyst Preparation and Carbon Nanotube Preparation</li><li>Adsorption Properties Graphene-Based Composites on Lead(II) Ions</li><li>Preparation and Properties of a New Type of Coal Dust Suppressant</li><li>Chapter 4: Ceramic Based Materials</li><li>Research Progress of Preparation and Interfacial Reaction of Ceramic Particles Reinforced Iron-Based Alloy</li><li>Performance Comparison of Aerospace High-Temperature Resistant Ceramic Fiber Felt</li><li>Stability Analysis of Thermocapillary Convection of B₂O₃/Sapphire Melt in an Annular Pool</li><li>Effect of Additives on Thermal Conductivity of Si₃N₄ Ceramics</li><li>Chapter 5: Cement Materials and Geopolymers</li><li>Influence of Uranium on the Hydration Properties of the Cement Clinker Minerals</li><li>Secondary Sintering Cement Clinker in SO₂ Atmosphere: Composition and Structure Effects</li><li>Self-Healing Properties of Ultra-High Toughness Fly Ash Based Geopolymer under Air and Water Environments</li><li>Synthesis of Belite-Ye'elimite-Ternesite Cement Clinker</li><li>Hydration Modification of Cement in the Presence of Diethanol-Isopropanolamine</li><li>Research Progress on the Hydration of Portland Cement with Calcined Clay and Limestone</li><li>Different Chlorides Attack on the Hydration of Calcium Aluminate Cement at 5~40 degreesC</li><li>The Influence of Various Gypsum Dosage, Specific Area of Cement and Water Reducers on Bleeding of Fresh Cement Paste Using Low-Field NMR</li><li>Effect of Steel Slag on Shrinkage Characteristics of Calcium Sulfoaluminate Cement</li><li>Synthesis of Fly Ash-Based Zeolite and its Research Progress in Wastewater Treatment</li><li>Effect of Styrene-Acrylic Emulsion on Crack Resistance of Cement-Based Materials</li><li>Study on the Mechanical Properties and Heavy Metal Ions Immobilization Capability of Solidified Body for MSWI Fly Ash with Geopolymer</li><li>Composition and Analysis of Domestic Patented Sleeve Grouting Material</li><li>Research on Grouting Materials for Underground Construction Projects</li><li>Experimental Study on Mechanical Properties and Micro-Mechanism of All-Solid-Waste Alkali Activated Binders Solidified Marine Soft Soil</li><li>Performance Optimization of Cement-Fly Ash Grouting Material Based on Response Surface Methodology</li><li>Chapter 6: Concrete</li><li>Research Progress on Carbonation Resistance of Alkali-Activated Slag Cement Concrete</li><li>Development on the Corrosion of Steel Fiber and Prevention in the Ultra-High Performance Concrete (UHPC)</li><li>Application of Advanced Composite Cementitious Materials and High Performance Admixtures in High Performance Shotcrete</li><li>Investigation on Electrical Resistance of Chloride Penetration of Alkali Activated Slag Concrete</li><li>Influence and Mechanism Analysis of Particle Size Distribution of Multi-System Mineral Admixture on Concrete Performance</li><li>Research on the Influence of Water Storage Medium on early Planting Performance of Portland Cement Foamed Concrete</li><li>Effect of All-Component Recycled GFRP on Physical-Mechanical Properties and Microstructures of Concrete</li><li>Influence of Glass Powder on Rheological Properties of Ultra-High Performance Concrete Paste</li><li>Misestimation of the ITZ Thickness around Non-Spherical Aggregates</li><li>Chapter 7: Pavement and Insulation Materials</li><li>Preparation and Analysis of External Walls with the Phase Change Facing Tile for Energy Savings</li><li>Compatibility and Storage Stability of Asphalt Binder Modified by Styrene-Butadiene-Styrene (SBS) Graft Copolymer</li></ul>