Diffusion in Solids and Liquids V

<ul><li>Preface</li><li>Committees</li><li>Surface Properties of 316L Austenitic Steel Improved by Simultaneous Diffusion of Titanium and Aluminium</li><li>Study of the Reactive Diffusion in the Presence of Dissolution of Copper in the Solder Melts</li><li>Empirical Expression for Estimation of Thermal Characteristics of Materials Used for Thermal Protection</li><li>The Study of Droplet Impact Behavior on Flat Surface with Different Surface Properties</li><li>Synthesis and Characterization of Ag Doped Hydroxylapatite via the Decomposition of EDTA Chelate</li><li>Thermo-Mechanical Materials Analysis</li><li>Desorption of Hydrogen from CeNi₃ Intermetallic Hydrides</li><li>Glycolic Acid Ethoxylate 4-Tert-Butylphenyl Ether as Drag Reducing Agent in Aqueous Media Flow</li><li>Heat Diffusion in Solidifying Alumina Splat Deposited on Solid Substrate under Plasma Sprayed Conditions: Application to Coating Formation</li><li>
<i>In Situ</i> Synthesis of B₄C / TiB₂ Composites from Low Cost Sugar Based Precursor</li><li>Investigation of Dynamic Recrystallization in an Al-Li-Cu-Zr(-Mg) Alloy</li><li>Microstructural Study of a High Bainite Dual Phase (HBDP) Steel Austempered at Different Temperatures</li><li>Pre-Aging and Maturing Effects on the Precipitation Hardening of an Al-Mg-Si Alloy</li><li>Peculiarities of the Electron-Phonon Interaction in Graphite Containing Metallic Intercalated Layers</li><li>Ion Nitriding of CoCrMo Alloys</li><li>Effect of Heat Treatments on the Structural and Mechanical Properties of Ti Thin Films Deposited on Steel Substrates by PVD Method</li><li>Characterization of Titanium Carbides Coatings Using X-Ray Microanalysis in Scanning Electron Microscopy</li><li>Numerical Simulation Study for the Effect of the Strength and the Direction of a Static Magnetic Field on the Transient Double-Diffusive Flow in Liquid Phase during an Alloy Solidification</li><li>Mathematical Modeling of Squeeze Casting of Magnesium Alloy AM50</li><li>A Kinetic Model for Dissolution of Second Phases in Die-Cast Mg Alloy AM50</li><li>Simultaneous Wicking-Convection Heat Transfer Process with Non-Newtonian Power-Law Fluid </li><li>Effect of Annealing on Nanocrystalline Structure of Nb₃Sn Diffusion Layers in Composites with Internal Tin Sources</li><li>Hydrogen-Induced Enhancement of Atomic Diffusion in Metals</li><li>Anisotropy of Boride Layers: Effect on the Mechanical Properties of AISI 4140 Borided Steels</li><li>The Effect of Alloying Elements on the Stability of Centerline Segregation</li><li>A Lattice Monte Carlo Analysis of Thermal Transport in Phase Change Materials</li><li>Ultra Rapid Sintering of Ceramics</li><li>Overview and Functional Characterization of Pb-Free Solders</li><li>Heat and Mass Transfer for a Constant Heat Boundary in Porous Reactive Medium under Local Non Equilibrium Conditions</li><li>Models for the Porosity Growth and Dissolution in Single-Crystal Nickel-Base Superalloys</li><li>Molecular Dynamics Calculation of Hydrogen and Iron Diffusion in Molten Tantalum under an Electric Field</li><li>Thermosolutal Convection in a Partly Multi-Layred Porous Annular Cavity</li><li>Defects Removal Using a Triangular-Shape Designed Tool</li><li>Proposed Model of Water Adsorption/Desorption in a PEM Membrane</li><li>Enhanced Mechanical Properties of Stainless Steel 316 L via Friction Stir Processing</li><li>Influence of Friction Stir Processing Parameters on the Fabrication of SiC/316L Surface Composite</li><li>Surface Roughness and Initial Pressure Effect on Superplastically Carburized Duplex Stainless Steel</li><li>Effects of Processing Factors on Microstructure and Diffusivity of Diethylbenzene Dehydrogenation Catalyst</li><li>Liquid Diffusion in Polymers by Electrochemical-Impedance Spectroscopy (EIS)</li><li>Diffusion in Materials by Atomic-Scale Modeling: Exploiting the Predictive Power of Classical and First-Principles Molecular Dynamics</li><li>Numerical Study of a Vertical Solidification Process under Magnetic Field in Unsteady State</li><li>Metallographic and Numerical Studies of the Role of Catalyst Particles of MgH₂-Mg System</li><li>An Approach for Analyzing the Growth Kinetics of Fe₂B Phase on AISI 1018 Steel</li><li>Reactive Diffusion of Uranium in Compacted Clay: Evaluation of Diffusion Coefficients by a Kinetic Approach </li><li>A Coupled Model of Two-Phase Diffusion and Flow through Deforming Porous Cosserat Media</li><li>Dependence between the Boron Surface Concentration and the Growth Kinetics of Boride Layers in AISI 4140 Steels</li><li>Diffusion in Electrodes Used for Resistance Spot Welding of Galvannealed Steel</li><li>Kinetic Monte Carlo (KMC) Simulation of GaAs (001) <i>?₂</i> (2x4) Reconstructed Surface and Characterization</li><li>Effects of Nickel on Interface Morphology during Oxidation of Fe-Cu-Ni Alloys</li><li>Thermal Properties and Crystallization Behavior of <i>Co</i>67<i>Fe</i>4<i>Cr</i>7<i>Si</i>8<i>B</i>14 Amorphous Alloy</li><li>Effect of Homogenization Time and Cooling Rate on Martensitic Transformations in Ti-57.5%wtNi Alloy</li><li>The Effects of Homogenization Time and Cooling Environment on Microstructure and Transformation Temperatures of Ni-42.5wt%Ti-7.5wt%Cu Alloy</li><li>The Consideration of Splendid Increasing Trend of Green Fuel H₂ Production with the Help of Nanofine Materials</li><li>Analysis of the Recrystallization of Cold-Rolled Copper after Isothermal Annealing Using Electron Backscattered Diffraction Patterns</li><li>Mechanical Performance of the Annealed NiTi Shape Memory Alloy Coating onto 316L Stainless Bio-Steel</li><li>Characterization of the Intermetallic Compounds Formed during Hot Dipping of Electrical Steel in a Hypo-Eutectic Al-Si Bath</li><li>Phase-Field Simulation on Coarsening of the ?'Phase Particles in Ni-Based Superalloys Considering Elastic Inhomogeneity</li><li>Diffusion of Ti, V and Nb in Ni₃Al at Elevated Temperatures</li><li>Effect of Lubricant Volume and Working Gap on the Surface Roughness and Material Removal Rate in Magnetic Abrasive Finishing</li><li>Air Characteristics in Air Turbine Spindle of Ultra Precision Machines</li><li>Magnetic Assisted Abrasion, a New Method for Nano Level Surface Finishing</li><li>Fluid Flow in Tree-Shaped Constructal Networks: Porosity, Permeability and Inertial Parameter</li><li>Unifying Theory for Natural and Man-Made Flow Systems: an Application to Design of Porous Material for Particulate Control</li><li>Water Vapor Permeability of Clay Nanocomposites Based on Amorphous PET</li><li>Heat Transfer Enhancement of Jet Impingement on a Flat Plate Attached by a Porous Medium with a Center Cavity</li><li>Analysis of Component Depth Profiles at the Interface of Ti6242 Alloy and SiC, SiN Coatings after High Temperature Oxidation in Air</li><li>Embrittlement of Cu and Cu-Based Alloys by Bi and Bi₂Te₃</li><li>Optical and Mechanical Properties of Aluminum Film Deposited on Glass Substrate</li><li>The Effect of Matrix Stiffness on the Mechanical Properties of the Composite Reinforced with Multi-Wall Carbon Nanotube</li><li>Numerical Simulation of Natural Convection in a Mold </li><li>Interdiffusion Studies in the Co- Mo System</li><li>Study on the Growth of Nb₃Sn Superconductor in Cu(Sn)/Nb Diffusion Couple</li><li>Formation of the Modulated Structure in a Steel by the Addition of a Strong Carbide Forming Element </li><li>Diffusion Studies in A₃B Compounds with A15 Structure</li><li>Evaluations of Hydrogen Permeation on Al₂O₃-CuO-ZnO-Based Cobalt Composite Membrane</li><li>Study on Homogenization Time and Cooling Rate on Microstructure and Hardness of Ni-42.5wt%Ti-3wt%Cu Alloy</li><li>Fe Ions Diffusion and Oxygen Complexes Evolution during Thermodonors Annealing in B-Doped Czochralsky Silicon Crystal</li><li>Computer Simulation Model for First-Order Phase Transition Fluctuation Stage </li><li>Drying of Kaolin Clay Cylinders: Dynamic Neutron Radiography Studies</li><li>Numerical Studies of the Diffusion Processes and First Step Oxidation in Nickel-Oxygen Systems by Variable Charge Molecular Dynamics</li><li>Internal Interface Strains Effects on UO₂/U₃O₇ Oxidation Behaviour</li><li>New Photothermal Deflection Method to Determine Thermal Properties of Bulk Semiconductors</li><li>Investigation of Optical and Thermo-Electrical Properties of SnSb₂S₄ Thin Layers Using the Photothermal Deflection Technique</li><li>Investigation of Thermal Properties of Thin Semiconductor Layers Deposited on a Glass Substrate by the Photothermal Deflection Technique </li><li>The Effect of Pressure on the Phase Transition of Pd₃Cu Alloy</li><li>Evaluations of Hydrogen Permeation on TiN-20wt.%Co Membrane by Hot Press Sintering</li><li>Influences of Dye Doping and Hole Blocking Layer Insertion on OLED Performance</li><li>Efficiency Improvement of Organic Light Emitting Diodes with Co-Deposited Hole Blocking Layer</li><li>Intermetallic Growth: Structure-Sensitive Effects</li><li>The Kinetics of Gas Nitrided Layer Growth on Austenitic Stainless Steel</li><li>Microstructure and Properties of Nanoclay Reinforced Asphalt Binders</li><li>Effect of a Shield on Mixed Convection in a Rectangular Enclosure with Moving Cold Sidewalls and a Heat Source on the Bottom Wall</li><li>The Effect of Traveling and Rotation Speeds on Mechanical Properties during Friction Stir Welding of Dissimilar Al Alloys</li><li>The Investigation on Optimum Corrosion Protection Potential of STS 316L in Seawater</li><li>Phase Formation in FeO_x-SiO₂-Cu₂O-ZnO-FeS System during Melts Crystallization</li><li>Heat Treatment Analysis of Large Al-Cu-Mg-Si Alloy Extrusion</li><li>A Contribution to the Analysis of the Thermo-Hydrodynamic Lubrication of Porous Self-Lubricating Journal Bearings</li><li>Measurement of Mass Diffusion Coefficient of Multi-Component System in Aqueous Media by Phase Shifting Interferometer</li><li>Diffusion of Hydrogen in Single Crystals of Monoclinic-ZrO₂ and Yttrium Stabilized Cubic Zirconia </li><li>Notices on Method of Thickness Evaluation of TiN Layers on Magnesium Alloys</li><li>Numerical Simulation of Heat Losses between a Partition Plate and the Wall of the Head of a Plastic Heat Exchanger</li><li>Anti-Sticking Properties of PVD CrWN_x, CrO_x and ZrO_x Coatings on Medical Electrode Application</li><li>Diffusion Kinetics of BSA Protein in Stimuli Responsive Hydrogels</li><li>Finite Volume Methods with Multi-Point Flux Approximation with Unstructured Grids for Diffusion Problems</li><li>Heat and Mass Transfers and their Mutual Effects in Membrane Processes</li><li>An Improved Method for Evaluating the Moisture Diffusivity in a Membrane</li><li>Silicon Dioxide as a Boundary for Oxygen Outdiffusion from CZ-Si</li><li>Cu Ti Formation in Nb Ti/Cu Superconducting Strand Monitored by <i>In Situ</i> Techniques</li><li>Structural Relaxation Process by Addition of B in CuHfTi Amorphous Alloys</li><li>Heat Transfer in Black Holes</li><li>Hydrogen Diffusivity and Solubility in Internally Oxidized Pd_0.97Zr_0.03 and Pd_0.97Nb_0.03 Alloys</li><li>Hydrogen Diffusivity and Hydride Formation in Rich-Zirconium Alloys Used in Nuclear Reactors</li><li>Three-Dimensional Study of Heat and Mass Transfer in a Partially Porous Elongated Cavity</li><li>Effects of the Microstructure on the Hydrogen Diffusivity in Ni-Based Superalloy 718</li><li>Modeling of Turbulent Flow and Heat Transfer in Graphitic Foams</li><li>Hydrogen Absorption/Desorption in Nanostructured Fe- and Ti-Doped Mg₂Ni Alloys</li><li>Surface Microstructure Evolution during Phase Transformation on Mn, Al and Si Alloyed Ultra Low Carbon Steel</li><li>A Study of Photocatalyst of the TiO₂ Thin Film with Acid Dispersed CNT for Dye-Sensitized Solar Cell</li><li>Diffusion in Al-Ni and Al-NiCr Interfaces at Moderate Temperatures</li><li>A High Order Time Advancement Scheme for Prediction of Solidification Processes</li><li>Experimental and Analytical Investigation of Ammonia Absorption into Ammonia-Water Solution: Estimated Interface Concentration</li><li>Performance Characteristics of Capacity Control of Industrial Water Cooler Using Pulse Modulation Valves</li><li>Reaction Diffusion in Pb Free Solder-Cu System</li><li>Numerical Analysis of Heat and Mass Transfer in an Annular Porous Adsorber for Solar Cooling System</li><li>Investigation of the Interfacial Reaction between Optical Glasses and Various Protective Films and Mold Materials</li><li>A Study of Porosity Influence on Thermal Diffusivity of Aluminium Foam by Experimental Analysis and Numerical Simulation</li><li>Thermal Conductivity and Thermal Expansion of Copper Matrix Composites Reinforced with High Modulus C Fibres</li><li>Microsegregation Induced Inhomogeneity of Coarsening of ?' Precipitates in a Nickel-Based Single Crystal Superalloy</li><li>Statistical Eulerian Diffusion Approach of Four-Way-Coupled Multiphase Systems</li><li>Theoretical Investigation of the Relation between the Output of a Methane Internal Reforming SOFC and the Composition of the Feedstream</li><li>Thermal Expansion of Advanced Materials for High Temperature Fusion Application</li><li>Atomic Contribution to Valence Band Density of States in Gallium Oxide and Silicon Oxide Nano Layered Films</li><li>Microstructure and Hydrogenation Property of Mg-6.7 mol% Ni Alloy</li><li>Depth Resolved and Elemental Selective XRF and XAS in Surface Layer of Annealed Fe-Cr Alloys</li><li>Depth Resolved XRF and XAS for Enrichment and Oxidation of Mn on Surface of Annealed Fe-Mn Alloys</li><li>The Effect of TaN Interlayer on the Performance of Pt-Ir Protective Coatings in Glass Molding Process</li><li>Thermal Stability of Al₂O₃ Coated Low Transition Temperature Glass</li><li>Presentation of a New Method for Determination of Diffusion Coefficients of Gaseous Pollutants in Cladding Wall Materials Indoors</li><li>Macroporous Silicon Electrochemical Etching for Gas Diffusion Layers Applications: Effect of Processing Temperature</li><li>Thermal Diffusivity of Traditional and Innovative Sheet Steels</li><li>Electroless Ni-P Composites with ZrO₂: Preparation, Characterization, Thermal Treatment</li><li>Improvement of the Electrochemical Properties in Nano-Sized Al₂O₃ and AlF₃-Coated LiFePO₄ Cathode Materials</li><li>Characterization of Electrolytically Deposited CdSe on Ti Substrates</li><li>The Effect of Al₂O₃ and Li₂O on the Anatase to Rutile Phase Transformation</li><li>Effect of the Separating Distance of Twin Buildings on the Generated Flow Structure</li><li>Pulse Electrolysis for the Production of Hard Ni/TiO₂-ZrO₂ Composite Coatings</li><li>Dispersion of Twin Inclined Fume Jets of Variable Temperature within a Crossflow</li><li>Effect of Processing Parameters on the Structural and Mechanical Properties of Micro Arc Oxidized Aluminium Alloy</li><li>Numerical Determination of Intrinsic Diffusion in Fe-Cr-Al Systems</li><li>Numerical Simulations on the Growth of Thin Oxide Films on Aluminum Substrates</li><li>Conjugate Heat and Mass Transfer in Metal Foams: A Numerical Study for Heat Exchangers Design</li><li>Oxygen Diffusion and Electrical Conductivity Measurements in Uranium Dioxide</li><li>Reaction-Assisted Diffusion Bonding of Advanced Materials</li><li>Simultaneous Measurements of Lattice and Grain Boundary Diffusion Coefficients via 2-Dimensional Simulations</li><li>Molecular Dynamics Simulation of the Buckling Behavior of Boron Nitride Nanotubes under Uniaxial Compressive Loading</li><li>Heat Transfer of Mineral-Filled Polypropylene Foams</li><li>Thermal Conductivity of Carbon Nanofibre-Polypropylene Composite Foams</li><li>The Role of Diffusion Accommodation and Phase Boundary Wetting in the Deformation Behaviour of Ultrafine Grained Sn-Pb Eutectic</li><li>Three-Dimensional Double Diffusion Mixed Convection in Rectangular Channel Filled with Porous Medium</li><li>Collapse-Type Shrinkage's Characteristics in Both <i>Eucalyptus urophylla</i> and <i>E.cloeziana</i> Wood under Heat-Treatment Conditions</li><li>Study on Collapse-Shrinkage Characteristics in Plantation-Grown Eucalyptus Wood under Continuous and Intermittent Drying Regimes</li><li>Characterization of Hard Coatings Modified with Nitrogen Implantation</li><li>Hot-Extruded Microstructure and Mechanical Properties of Mg-Al-Sn Alloys</li><li>Al-Si-Fe Intermetallics on Fe-Substrates during Hot-Dipping</li><li>Galvanized Coatings Produced in a Hot Dip Simulator (HDS)</li><li>Comparison of Functional Properties of Thin Layers on Titanium and Cobalt Implant Alloys</li><li>Corrosion Resistance of Porous 316L Implant Steel</li><li>Diffusion in MC Carbides in High-Speed Steels during High-Temperature Treatments</li><li>Diffusion and Secondary Carbide Precipitation in High-Speed Steels</li><li>Influence on Olive Leaves (<i>Olea Europaea</i>, var. Serrana) Antioxidant Extraction Kinetics of Ultrasound Assisted Drying</li><li>Ultrasound Effects on the Mass Transfer Processes during Drying Kinetic of Olive Leaves (<i>Olea Europea</i>, var. Serrana)</li><li>Alloying Effects on the Hydrogen Diffusivity during Hydrogen Permeation through Nb-Based Hydrogen Permeable Membranes</li><li>Automated Burner and Biogas Register for Sewage Treatment Mini Stations</li><li>Complex Change in Superficial Layer Properties of Specimen Obtained by Metallurgical Powder under Vibration Process Method</li><li>A New Modified Austempering to Increase Strength and Ductility Simultaneously for UHS Steels</li><li>Ultra Fine Grain via Friction Stir Processing of 7075-T6 Grade Aluminum Alloy</li><li>Effects of Load and Sliding Speed on Tribological Behavior of Plasma Sprayed Bronze-Alumina Coatings</li><li>Predicting Behavior of Plasma Nitrided Ni+Al Composite Coating Using an Artificial Neural Network Model</li><li>Evolution of Interdiffused Gaussian-Shape Nanolayer in Au-Si(111) System at Ambient Condition</li><li>Synthesis and Characterization of Gd₂O₃ Doped CeO₂ Nanopowders by a Glycothermal Process</li><li>Analysis of Cryogenic Refrigeration Cycle Using Two Stage Intercooler</li><li>Kinetics of Isothermal Phase Transformations by Phase-Field Simulations: An Analogy between the Peritectic and Monotectic Systems</li><li>Evaluation of the Corrosion Behavior of the Laser Gas Nitrided Ti-6Al-4V</li><li>Film Formation via Plasma Electrolyte Oxidation of Ti and Ti-5Mo-4V-3Al Alloy in High Alkaline Solutions</li><li>Structural Stability of Composite Materials Prepared by Explosion Welding after their Heat Treatment</li><li>Study of Explosion Welding of Mg Alloy with Aluminium</li><li>Comparative Tribological Behavior of V(N,C) and VC Diffusion Coatings</li><li>Characterization of Thermal Contact Resistance in Metal Micro-Textured Thermal Interface Materials Using Electrical Contact Resistance Measurements</li><li>Decreasing the Fouling of Heat Exchanger Plates Using Air Bubbles</li><li>The Simulation of Heat and Vapour Transfer Trough Fibrous Materials</li><li>Numerical Prediction of the Effective Thermal Conductivity of Open- and Closed-Cell Foam Structures</li><li>The Nature of the Vacancy-Wind Effect Occurring in Diffusion via Six-Jump-Cycles in B2 Intermetallics</li><li>Parametric Analysis of the Classification of Harrison Kinetics Regimes in Grain Boundary Diffusion</li><li>Study of Moisture Buffering in Building Materials with Application of Sorption Kinetics Models</li><li>Experimental and Analytical Study of Contaminant Transport Resulting from Dissolution of a Flat Surface Buried in a Packed Bed</li><li>Experimental Values of Solubility of Organic Compounds in Water for a Wide Range of Temperature Values ? A New Experimental Technique</li><li>A Mathematical Model to Predict Moisture Uptake of Dry Products Packaged Individually in Flexible Films</li><li>Modelling Moisture Uptake by Binary Mixtures of Products Packaged in Polymeric Films</li><li>Effects of Milling Time and Impact Force on the Mutual Diffusion of Cu and Fe during Synthesis of Nanostructured Fe-50%Cu Alloy via Mechanical Alloying Process</li><li>Diffusion at Short Circuits: State of the Art</li><li>Properties and Characterization of Hard Coatings Obtained by Boriding: An Overview</li><li>Mathematical Model of Forecasting the Coke Quality Indicators</li><li>Influence of Elements Oxides Microadditives with Major Cationic Radius on Properties of Silicate Bundle </li><li>Isotope Exchange of Gaseous Oxygen with Oxide LaMno_3+? Nanograins Boundary </li><li>Structural Phase Transitions in Mechanoactivated Manganese Oxides</li><li>Structure and Thermal Stability of Cu after Severe Plastic Deformation</li><li>Site Preference and Diffusion in Ni₃Al Alloyed with Ir, Ta or Re at 1200 degreesC</li><li>Determination of Average Ternary Interdiffusion Coefficients Using Moments of Interdiffusion Flux and Concentration Profiles</li><li>Effects of Combined Surface Modification on Adhesion Strength of CrN Coatings for STS420</li><li>Diffusion in SC Ni-Base Superalloy under Viscoplastic Deformation</li><li>Diffusion Phenomena of the Oxygen and Nitrogen in Niobium by Mechanical Spectroscopy</li><li>Effect of Reactive Elements and Microstructure of Steel on High Temperature Oxidation Behaviour of Ferritic Stainless Steels</li><li>On the Grain-Boundary Diffusion in Polycrystalline Materials and Thin Films</li><li>Composition and Pressure Dependence of the Diffusion Coefficients in Binary Liquid Alloys</li><li>Diffusion in Binary Silicides of Iron and Molybdenum</li><li>Air Oxidation Behaviour of a Ti-6Al-7Nb Alloy</li><li>The Effect of Oxidation on The Structure and Hardness of (Zr, Hf)N Coatings</li><li>Molecular Dynamics Calculations of InSb Thermal Conductivity</li><li>The Influence of Stress on Interstitial Diffusion - Carbon Diffusion Data in Austenite Revisited</li><li>A Mathematical Model for the Estimation of the Energetic Potential for Several Renewable Energy Sources: Application on the Design of a Modern Power Plant</li><li>On the Significance of Flow Regime for the Heat Transfer in Solid Oxide Fuel Cells</li><li>Diffusion and Reaction in Hierarchical Structured Metal Oxides - A Transient TAP Study</li><li>Natural Convection in Vertical Channels with Porous Media and Adiabatic Extensions</li><li>Numerical Investigation on Transient Conjugate Optical-Thermal Fields in Thin Films Irradiated by Moving Sources for Front Treatments</li><li>Effect of Solid Thickness on Transient Heat Conduction in Workpieces Irradiated by a Moving Heat Source</li><li>Selected Analyses and Observations in Multicomponent Diffusion</li><li>Bi-Velocity Method and Linear Nonreversible Thermodynamics, Interdiffusion in R2</li><li>Molecular Ion Channels; Electrodiffusion in R3</li><li>Investigation of a Mathematical Model of High-Temperature Diffusion Controlled Heterogeneous Reaction between Metal and Oxide Melts</li><li>Anomalous Diffusion Coefficients for W(IV) Ion Diffusion in NaCl-KCl Melt at 700-750 degreesC</li><li>A Limited Condition for Bifurcate or Trifurcate Kirkendall Planes in Multiple Phase Diffusion Couples</li><li>Comparison of Four Thermo-Mechanical Models for Simulating Reactive Flow in Porous Materials</li></ul>