This special topic publication presents the research results in the synthesis, properties research and processing technologies investigation for a wide nomenclature of recent functional, structural and building materials. The specialised edition will be useful to many engineers and researchers from machinery, materials development and construction.
This special topic publication presents the research results in the synthesis, properties research and processing technologies investigation for a wide nomenclature of recent functional, structural and building materials. The specialised edition will be useful to many engineers and researchers from machinery, materials development and construction.
Reihe
Sprache
Verlagsort
Zielgruppe
Illustrationen
Illustrations, unspecified
Dateigröße
ISBN-13
978-3-0364-1275-7 (9783036412757)
DOI
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Klassifikation
<ul><li>Preface</li><li>Chapter 1: Properties and Synthesis Technologies of Functional Nanomaterials</li><li>Preparation and Investigation of Structural and Surface Morphology Properties of ZnO Nanorods for Possible Environmental Applications</li><li>Effect of Sintering Temperatures on the Physical Properties of Bi-2223 System Prepared by Co-Precipitation Method</li><li>Influence of Sintering Temperature on the Structural and Electrical Properties of CeO<sub>2</sub> Nanoparticles Prepared by Hydrothermal Method</li><li>Study the Effect of Reaction Time on Preparation of Iron Oxide Nanoparticles by Hydrothermal Technique</li><li>Characteristics and Biological Applications of Green Nickel Oxide Synthesised by Hibiscus Sabdariffa Flowers</li><li>Preparation of Zinc Nanoparticles by Gas Condensation in a Contactless Crucible</li><li>Chapter 2: Properties and Processing Technologies of Structural Materials in Machinery</li><li>Coercive Force of Low-Carbon Steel Specimens Subjected to Cyclic Loading and Impulse Current</li><li>Effect of the Weld Deposit Thickness on the Impact Strength of Heat-Affected Zone of the Welded Joint</li><li>Study of the Structure and the Destruction Surface of the Dampers Manufactured by the Selective Laser Melting</li><li>Research for the Process of Forming the Metal during its Cyclic Deformation</li><li>Restoration of Parts of the Gas Distribution Mechanism of Cars in Mechanical Engineering</li><li>Optimization Strategy for Molecular Dynamics Simulations of Nanometric Cutting of Aluminium Alloy Using Molecular Modelling</li><li>Forming Parameters and Optimization of A5052 in SPIF Process</li><li>Deformation Evaluation of A5052 Sheet Metal in SPIF Process</li><li>Observation of Microstructures in Carburized-Quenched SCM415 Steel under Rotating Bending Fatigue of 716 MPa</li><li>Chapter 3: Mechanics of Materials and Tribology Research</li><li>Observation of Transition Area Origin Cracks on Fracture Surfaces of Carburized JIS SCM415 Bars</li><li>Influence of Groove Roughness on Crack Initiation of PEEK Thrust Bearing in Water</li><li>Engineering Method for Calculating the Limiting Amplitudes of Stress Cycles for Structural Steels</li><li>Chapter 4: Concrete and Mortars</li><li>Energy Efficiency of Concrete with Phase Change Materials</li><li>Basic Study on the Effect of Water Sprinkling Curing Immediately after Demolding on the Initial Strength of Steam Cured Mortars</li><li>Mechanical Evaluation of Geopolymeric Mortars Reinforced with Alpaca Wool Fibers</li><li>Characterization of Ceramic and Concrete Wastes from CDW as Secondary Raw Materials for Mortar Applications</li><li>Comparative Study of Concrete Reinforced with Polyolefin Fiber</li><li>Effect of Initial Water Sprinkling Curing on Strength Development of Precast Concrete</li><li>Comparative Life Cycle Analysis (LCA) between a Geopolymeric Mortar Derived from Mining Waste and Conventional Mortar</li></ul>
