Current Materials Research Using X-Rays and Related Techniques III

<ul><li>Preface</li><li>Chapter 1: Polymers and Composites</li><li>Prediction and Optimization on Tribological Behaviour of Kenaf/Carbon Fiber Reinforced Epoxy Matrix Hybrid Composites</li><li>The Effect of Graphite Loading as Reinforcement on Carbon Foam from Natural Resources</li><li>Synthesis and Characterization of Palm Kernel Oil Polyol Based Shape Memory Polyurethane: Effect of Different Diisocyanates</li><li>Characterization of Sodium Alginate Membrane Plasticized by Polyols and Polyamine for DMFC Applications</li><li>Effect of Chemical Treatment on Mechanical and Morphological Properties of Sugarcane Bagasse Reinforced Unsaturated Polyester Composite</li><li>Effect of Graphene on Mechanical and Morphological Properties of Coconut Shell Reinforced Unsaturated Polyester Composite</li><li>UV Radiation Crosslinking of Acrylated Palm Olein (APO) Copolymer Resins for 3D Printing</li><li>Surface Analysis of Grafted Low Density Polyethylene Film by FTIR and XPS Spectroscopy</li><li>Box Behnken Design to Optimize Parameter for Vapor Grafting of Cinnamaldehyde Essential Oil onto Polyvinyl Alcohol</li><li>Radiation Modification of Commercial Polyvinylidene Fluoride (PVDF) Backsheet Film for Mechanical and Thermal Properties Enhancement</li><li>Physiochemical Properties of Biofilm from <i>Dioscorea hispida</i> Starch Blended with Glycerol Extracted from Recycling Cooking</li><li>Crystallinity of Nanocellulose and its Application in Polymer Composites: A Short Review</li><li>Characterization of Thin Film PLA/PBAT Reinforced with Microcrystalline Cellulose Derived from <i>Gigantochloa albociliata</i></li><li>Study on Composition of Rice Husk Silica Reinforcement to Hardness and Microstructure of Recycling Milled AA7075</li><li>
<i>Tectona grandis</i>: Examine an Ultrastructure on Cultivated Teakwood due to the Scanning Electron Microscopy Enhanced by Heat Treatment</li><li>Correlation of Humidity and Mechanical Properties of Different Grades of RT-PMMA</li><li>Influence of Gamma-Irradiation on Swelling Percentage, Flammability Resistance and Morphological Analysis of EPDM/Sepiolite Composites</li><li>Chapter 2: Materials for Biomedical Application and Pharmacology</li><li>Porous NiTi Shape Memory Alloy Fabricated via Powder Metallurgy Technique Using Pore Forming Agent</li><li>Effect of Sintering Temperature on Hardness of Bioactive Glass/Cordierite</li><li>Characterizations of Calcium Oxide from Calcined Eggshell Waste</li><li>Effect of Soaking Time on the Compositional and Morphological Changes of DCPD-Coated ?-TCP Bioceramic</li><li>Synthesis and Characterization of Sol-Gel Derived Strontium Doped S53P4 Bioglass</li><li>Preliminary Study on the Bioactivity Properties of Cordierite/?-Wollastonite Biocomposite Ceramics</li><li>Effect of Calcium Salt Coating on Cordierite Powders on Bioactivity Properties</li><li>Extraction and Characterization of Natural Hydroxyapatite from Black Tilapia Fish Bone for Biomedical Applications</li><li>Characterization of the Halal Natural Hydroxyapatite Extract from Black Tilapia Fish Scale</li><li>Effect of Stirring Speed on the Formation and Characteristic of Alginate Microspheres via Gelation/ Emulsification Method</li><li>Fabrication and Characterization of Alginate/Iron (III) Oxide Beads and Biofilm for Biomedical Applications</li><li>Chapter 3: Ceramics</li><li>Influence of Feldspar Addition on the Properties of CaCu₃Ti₄O₁₂ Ceramic</li><li>Effect of Pressure Load on the Physical Properties of ZTA-TiO₂-Cr₂O₃</li><li>Comparative Study on the Wears of ZTA-TiO₂-Cr₂O₃ Ceramic Cutting Tool and Commercial Ceramic Cutting Tool</li><li>The Effects of MWCNT Addition to Physical Properties of ZTA-MgO Cutting Tool</li><li>The Effect of Polyvinyl Alcohol Addition on the Solid Carbon Infusion in Zirconia-Toughened Alumina</li><li>Dielectric Properties of Low Concentration Barium Doped K_0.5Na_0.5NbO₃ Lead Free Ceramics Prepared via Solid State Reaction Method</li><li>Densification of Zirconia Toughened Alumina Added CeO₂Ceramics via Hot Isostatic Press Sintering Technique</li><li>Compressive Strength of Zirconia-Toughened Alumina (ZTA) Foam with CaCO₃ and CeO₂Addition via Polymeric Sponge Replication Technique</li><li>Development and Characterisation of Triaxial Electrical Porcelains from Malaysian Ceramic Minerals</li><li>Preparation of Porous Porcelain with Treated Flue Gas Desulfurization (FGD) Sludges the Foaming Agent</li><li>Chapter 4: Materials and Technologies for Opto- and Microelectronics</li><li>Optical and Structural Properties of Controlled pH Variation on Zinc Oxide Nanostructured via Hydrothermal Method</li><li>Light Absorption Enhancement Using Graphene Quantum Dots and the Effect of N-719 Dye Loading on the Photoelectrode of Dye-Sensitized Solar Cell (DSSC)</li><li>TiO₂ Photoelectrode Band Gap Modification Using Carbon Quantum Dots (CQDs) for Dye-Sensitised Solar Cells (DSSCs)</li><li>Growth of Nanostructured Zinc Oxide on Flexible Conductive Substrate: A Review</li><li>Interfacial Reaction between SAC3807 Lead-Free Solders and Different Copper Substrate via Reflow Soldering Process</li><li>Physical and Electrochemical Properties of Graphene Decorated with ZnO Hollow Spheres for Supercapacitor Applications</li><li>Evaluation of Olivine LiFePO₄ Polyanionic Cathode Material Using Density Functional Theory</li><li>The Effect of Oxygen and Air Flow on the Characteristic of Zinc Oxide ZnO Nanorods</li><li>Ionizers as Major ESD Countermeasure in 12nm Gate Oxide Semiconductor Manufacturing</li><li>Chapter 5: Functional Materials</li><li>Comparison of Stability Mechanism of Graphene Nanoparticles in Polyester Oil</li><li>Structural Behaviour and Electrical Properties of a Ball Milled MnCoGe Compounds</li><li>The Effect of Annealing Temperatures on the Phase Transition and Structural Properties of MnCoGe Compound</li><li>Influence of Annealing Temperatures on the Structural Behaviour and Electrical Properties of La(FeSi)₁₃ Alloys</li><li>Electrical Properties and Raman Scattering of Palm Oil Based Carbon Nanotube</li><li>Fabrication and Characterization of Nickel Oxide Nanofibers by Electrospinning Technique</li><li>Chapter 6: Materials and Technologies in Environmental Engineering</li><li>Catalytic Oxidative Desulfurization of Model Diesel Using TBHP-DMF System</li><li>Identification of <i>Nymphoides indica</i> and <i>Eichhornia crassipes</i> as Potential Plants for the Phytoremediation of Batik Wastewater</li><li>Optimization Study of Malachite Green Dye Adsorption by Eggshell Using Response Surface Methodology</li><li>High Purity Nano-Silica from Rice Husk Ash (RHA) via Chemical Method as Additive/Stabilizing Agent for CO₂Capture Application</li><li>Adsorption Isotherm Analysis for CO₂ Capture Using Barium Oxide Impregnated Iron(III) Oxide by Ultrasonic-Assisted Synthesis</li><li>Response Surface Methodology Optimization of Chemical Oxygen Demand Removal by Rice Husk Activated Carbon</li><li>Controlled Process of Radiation-Induced Grafting by Chemical Vapour Deposition for the Synthesis of Metal Adsorbent</li><li>Properties of Polyethersulfone Ultrafiltration Membrane by Incorporating Ionic Liquid for Humic Acid Removal</li><li>Comparative Study of Fe,N-TiO₂ Photocatalysts under UV Light Irradiation</li><li>Physical Properties of ? Irradiated TiO₂ Nanoparticles</li><li>Characterizations of High Entropy Alloy Powder as Catalyst Synthesized by Mechanical Alloying for Azo Dye Degradation</li><li>Chapter 7: Materials and Technologies of Chemical Production</li><li>A Study on the Catalytic Technology for Reduction of Naphthenic Acid Compound from Acidic Crude Oil</li><li>Fermentable Sugar via Diluted Acid Hydrolysis of Sugarcane Bagasse</li><li>Effect of Ferrite as Filler in Sugarcane Bagasse Paper via Irradiation Method</li><li>Effects of Sulphuric Acid and Speed Rotation on Hydrolysis of Bamboo Sawdust</li><li>Chapter 8: Structural Metals and Alloys</li><li>Phase Composition of Sintered AlCrFeNi</li><li>Morphological and Structural Properties of Sn-Bi Lead-Free Solder in 6 M Potassium Hydroxide</li><li>Simulation and Experimental of Crack Propagation in Automotive Engineering Component</li><li>Detection of Vibration Induced Fatigue Crack Propagation Using a Hybrid Method</li><li>Chapter 9: Mineral Processing and Metallurgy</li><li>Microwave-Assisted Acid Digestion of Malaysian Monazite for Determination of REEs Using ICP-MS</li><li>Utilization of Empty Fruit Bunch Derived Vapor for Carbon Deposition within Iron Ores</li><li>Malaysia's Rare Earth Element Story: Characterizing the "Amang"</li><li>Recovery of Light Rare Earth Elements (LREE) from Monazite by Alkaline Fusion</li><li>Extraction of Thorium Oxide (ThO₂) from Malaysian Monazite through Alkali Digestion: Physical and Chemical Characterization Using X-Ray Analysis</li><li>Chapter 10: Laser Technologies</li><li>RSM Modeling and Validation of Glass Assisted Laser Micro Drilling of Silicon Wafer</li><li>RSM Modelling for Laser Cutting of Shore Wood to Replace Traditional Manufacturing Method</li><li>Chapter 11: Thin Films, Coatings and Surface Engineering</li><li>X-Ray Reflectivity Analysis in Evaluating Multilayer Thin Film Fabrication</li><li>Structural Analysis of DLC Thin Film Using X-Ray Reflectivity and Raman Spectroscopy Techniques</li><li>Evaluation of Reduced Graphene Oxide Film Using In-Plane XRD Measurement</li><li>Influence of Electrophoretic Deposition (EPD) Voltage on SOFC Interconnect Morphology</li><li>Effect of Spherical Tungsten Carbide Load to the Corrosion Behaviour of Plasma Transfer Arc Hard Facing in Acidic and Alkaline Environment</li><li>Green Synthesis of Nanostructured Zinc Oxide (ZnO) - Titanium Dioxide (TiO₂) Thin Films</li><li>Corrosion Behavior of Antimony (Sb) Modified Galfan (Zn-Al) Coated Steel</li><li>pH Effect on Microbial Corrosion by <i>Pseudomonas aeruginosa Sp</i>. on Galvanized JIS3502 Steel</li><li>AlCrN Coated WC by PVD at Various Deposition Temperatures</li><li>Effect of Complexing Agent on The Morphology and Corrosion Effect of Cu-Sn-Zn Ternary Alloy via Electroplating</li><li>Tropical Climate Adaptation via Biomimicry and Surface Functionalization for Electronic Circuitry</li><li>The Mechanical Integrity of Self-Healing Coating Embedded with Microencapsulated Vegetable Oil</li><li>Chapter 12: Building Materials</li><li>Compressive Strength of Concrete Bricks with Recycled Concrete Sludge Waste</li><li>Influence of Modified Chemical Compositions on Palm Oil Fuel Ash to the Physico-Mechanical Properties of Porcelain</li><li>Study of Different Composition of Gypsum as Retarder in Ordinary Portland Cement</li><li>Interfacial Transition Zone (ITZ) Study of Concrete with Polyethylene Terephthalate (PET) Plastic</li><li>Study of Fly Ash Concrete Exposed to Elevated Temperature</li><li>Mechanical Enhancement of Composite Bricks Using Kenaf and Oil Palm Cellulose Nanofibrils</li><li>Effect of Adding Hydrogen Peroxide (H₂O₂) and Sodium Dodecyl Sulphate (SDS) to the Properties of Fly Ash (FA)-Based Geopolymer Mortar</li><li>Use of Municipal Solid Waste Incineration Bottom Ash and Rice Husk Ash as Blended Cement</li><li>Phase Transformation of FGD By-Product into Plaster Mould via Heat Treatment Process</li><li>Coal Power Plant Fly Ash Characterization Assessment for Geopolymerization Process</li></ul>