Semi-Solid of Alloys and Composites XVI

<ul><li>Preface</li><li>A Short History of MIT Studies on Fluid Flow in Solidification, 1952- 2009</li><li>Chapter 1: Materials Development and Characterisation</li><li>Variation of Microstructure and Mechanical Properties of ZW61 Magnesium Alloy Solidified under Different Pressures</li><li>Short-Term Oxidation Behavior, Microstructure Evolution and Compression Behavior of Nickel-Based Superalloy GH4037 in Solid and Semi-Solid States</li><li>Heat-Resistant Al-Alloys with Quasicrystalline and L1₂- Precipitates</li><li>Using Micro-CT Scanning to Quantitative Characterize Porosity in High Pressure Die Castings and Semi-Solid Castings</li><li>Effect of the Mg₃N₂ Sub-Micron Particle on the Grain Refinement of AZ80 Alloy</li><li>Effect of Solute Ta on Grain Refinement of Al-7Si-0.3Mg Based Alloys</li><li>Role of Iron-Rich Phases and Porosity on the Ductility of Rheocast Al-Mg-Si-Alloys</li><li>Effect of Homogenization Annealing on Wear Properties of Thixo-Extrued Copper Alloy</li><li>Dependence of Microstructures and Mechanical Properties on the Growth Rate and Composition in Directionally Solidified Mg-Gd Alloys</li><li>A ?-Shaped Curve of Hot Tearing Susceptibility in Magsimal (R)-59-Based Alloys</li><li>Phase Transformation of M2 High Speed Steel during Semi-Solid Cooling and Conventional Cooling</li><li>Bending Strength and Fracture Behaviour of Metal-Ceramic Interpenetrating Phase Composites Manufactured by Using Semi-Solid Forming Technology</li><li>Chapter 2: Rheology, Modelling and Simulation</li><li>Visco-Elastic Properties of Semi-Solid Alloys</li><li>Understanding the Rheological Transitions in Semi-Solid Alloys by a Combined <i>In Situ</i> Imaging and Granular Micromechanics Modeling Approach</li><li>Experimental and Numerical Study of the Effect of Pouring Temperature and Fluid Convection on Spherical Grains Formation</li><li>Effects of Grain Morphology on Flow Behavior of Semi-Solid Slurries</li><li>Chapter 3: Development of Industrial Processes and Technologies</li><li>Structure Optimization of Semi-Solid Die Cast Steering Knuckle and its Experiment Verification</li><li>Effect of Runner Distance on Microstructure and Properties of Semi-Solid Squeeze Casting CuSn10P1 Alloy</li><li>Industrialization of Aluminum Alloy Uniform Solidification Controlled Rheological Die Casting</li><li>Semisolid Casting and Die Casting of Al-4.8%Mg-2%Si Alloy</li><li>Progress of Semi-Solid Processing of Alloys and Composites in China</li><li>The Effect of Solution Time on the Microstructure of A356.2 Aluminum Alloy Provided by Rheocasting and Squeeze Casting</li><li>Properties of Semisolid Parts: Comparison with Conventional and Innovative Manufacturing Technologies</li><li>Using Recycled Materials for Semi- Solid Processing of Al-Si-Mg Based Alloys</li><li>Preparation of Semi-Solid 357.0 Slurries with Different ?-Al Phase Features by Solidification from Full Liquid State and Remelting</li><li>Manufacturing of Hybrid Al-Cu-Heatsinks by Combining Powder Pressing with Thixoforming</li><li>Recent Industrial Application and Perspectives of Rheo-Diecast Process in China</li><li>Determination of the SSM Processing Window</li><li>Control of Amount of ?-Al Phase Particles in near Eutectic Al-Si Alloy by Electromagnetic Stirring</li><li>Effect of Serpentine Channel Pouring Process on the Microstructure of Semi-Solid 6061 Aluminum Alloy Slurry</li><li>Characterizing the Effect of Processing Parameters on Temperature Distribution of 7075 Aluminum Alloy Slurry Prepared by Enthalpy Control Process</li><li>About Residual Stress State of Castings: The Case of HPDC Parts and Possible Advantages through Semi-Solid Processes</li><li>Semi-Solid 6061 Aluminum Alloy Slurry Prepared by Serpentine Channel Pouring Process and its Rheo-Diecasting</li><li>Semisolid Materials Processing: A Sustainability Perspective</li><li>Recycling Al-Si Alloy by Semisolid Material Dragged during Continuous-Casting Strip Processing</li><li>Cooling Curve Analysis of A356 Alloy by Conventional Casting and the Effect of Stirring</li></ul>