Advances in Applied Mechanics

Name: Advances in Applied Mechanics | Select Proceedings of INCAM 2022
Brand: Springer
Price: 341.33 EUR
Availability: OnlineOnly

Select Proceedings of INCAM 2022

Deepak Kumar Vineet Sahoo Ashok Kumar Mandal Karunesh Kumar Shukla(Herausgeber*in)

Springer (Verlag)

1. Auflage

Erschienen am 21. Juni 2024

XIV, 388 Seiten

E-Book

PDF mit Wasserzeichen-DRM

Systemvoraussetzungen

978-981-97-0472-9 (ISBN)

341,33 €inkl. 7% MwSt.

Systemvoraussetzungen

für PDF mit Wasserzeichen-DRM

E-Book Einzellizenz

Als Download verfügbar

Beschreibung

Weitere Details

Weitere Ausgaben

Personen

Dr. Deepak Kumar is an assistant professor in the Mechanical Engineering Department at the National Institute of Technology, Jamshedpur, India (an Institute of National Importance, Government of India). He is working in the field of damage mechanics of composite materials, nanocomposites, smart materials, product design, and development of biomaterials. He received a bachelor's degree in mechanical engineering from MAHE, India, Master's degree in Computer Aided Analysis and Design from BITS, Mesra, India, and Ph.D. in Aerospace Engineering from Gyeongsang National University, South Korea. His Ph.D. thesis was about a multiscale damage model for composite structures, which considered the onset and evolution of intra-laminar matrix cracking and interlaminar delamination in various ply-configurations considering the mixed mode failure. Deepak also gained valuable experimental expertise in the areas of automated fiber placement technologies and composite bolted-joint mechanics. His latestresearch interests are the development of nanocomposites for development of supercapacitor, energy devices and artificial tissues.

Dr. Vineet Sahoo is an assistant professor in Dept. of Mechanical Engineering at NIT Jamshedpur, India. His research focuses on design and development of special drives such as strain wave gears, LSHT orbit Motors, etc., which are used in precision power transmission and automation. He is particularly interested in understanding stress-strain behavior such as devices in static and dynamic conditions. He has a very good hand on experimentation of such precision devices. Recently, his work is focused on unraveling the design methodology of strain wave gears such that it can be developed indigenously. Further, Sahoo and his associates at NIT Jamshedpur seek to bring design evolutions in various mechanical components like bearings, gears and other power transmitting devices. He has more than 08 years of teaching experience. He has published 22 research papers in reputed SCI and Scopus-indexed journals and international conferences.

Dr. Ashok Kumar Mandal is an assistant professor in the Mechanical Engineering Department of National Institute of Technology Jamshedpur, India. His research is in the field of nonlinear vibrations, control, acoustics and hyperelasticity. He received his master's degree in Machine Design from IIEST, Shibpur, and Ph.D. in Mechanical Engineering from IIT Kanpur. His Ph.D. thesis was on vibration characteristics of strings in the presence of unilateral smooth finite boundary obstacles. Dr. Mandal has more than seven years of teaching experience in the Departments of Mechanical Engineering of BIT Mesra and NIT Jamshedpur. He has guided four M.Tech. and one Ph.D. thesis. Dr. Mandal is currently working on three sponsored research projects which are funded by Govt. of India. His research interest also includes mechanics of Indian musical instruments and technology for rural development.

Prof. Karunesh Kumar Shukla is currently the director of NIT Jamshedpur. He earned his B.E. degree from M.M.M.E.C Gorakhpur (Gorakhpur University) in 1986 and his M.E. from M.N.R.E.C Allahabad (Allahabad University) in 1988. He completed his Ph.D. from the Indian Institute of Technology, Delhi, in 2001. He was a visiting research fellow at Mechanical and Computer Aided Engineering Department, Feng Chia University, Taichung, Taiwan, during Nov. 2002-March 2003 and June 2004. He was also a research scholar in Applied Mechanics Department at IIT Delhi, India, from July 1997-Sept. 2000. Prof. Shukla specializes in areas such as composite plates and shells, smart structures, retrofitting and strengthening of RCC structures, computational mechanics, stability and dynamics of structures, multi-scale composite. He has authored the book "An Introduction to Strength of Materials" which has proved to be of immense help to students nationwide.

Inhalt

Intro
Preface
Contents
About the Editors
Dynamics of Thin-Walled Metamaterial Beam with Local Resonators
1 Introduction
2 LR Metamaterial Structure
3 Dynamic Analysis
3.1 Dispersion Analysis of an Infinite Structure
3.2 Transmissibility Analysis of a Finite Resonator Beam
4 Research Outcomes and Analysis
4.1 Band Gap of Unit Cell
4.2 Transmissibility of Vibration Waves
4.3 Resonator Parametric Study
5 Conclusions
References
Modeling of Indentation on Wooden Surface in Drop Tower Impact
1 Introduction
2 Experimental Procedure
3 Impact Model
4 Results and Discussion
5 Conclusion
References
Improving the Effectiveness of Frictional Damping by Varying the Normal Load in a System with One Degree of Freedom
1 Introduction
2 Mathematical Modeling
3 Result and Discussion
4 Conclusions
References
Compressive Behaviour of Composite Solid Propellant
1 Introduction
2 Material and Experimental Setup
3 Results and Discussion
4 Conclusions
References
An Extended Finite Element Framework for Free Vibration Analysis of Laminated Composite Plates
1 Introduction
2 Mathematical Formulation of Composite Laminate Plate Based on HSDT Theory with XFEM
3 Results and Discussion
3.1 Edge Crack Square Composite Laminate Plate
4 Summary
References
Linear Dynamic Analysis of Viscoelastic Laminated Composite Plates
1 Introduction
2 Formulation
3 Results and Discussion
4 Conclusions
References
Elasto-plastic Damage-Healing Model Coupling Secondary Damage Variable for Diffusion-Based Healing in Materials
1 Introduction
2 Damage-Healing Model for Elasto-plastic Response Coupling Re-damage
3 Diffusion-Based Healing
4 Results and Discussion
5 Conclusions
References
Design and Development of Flexible Elastomer for Energy Storage
1 Introduction
2 Materials and Methods
3 Result and Discussion
3.1 Optical Analysis
3.2 Dynamic Mechanical Analysis
4 Conclusions
References
A Numerical Analysis of Mechanical Behavior of Additive Manufactured Polylactic Acid (PLA) Specimen Through Finite Element Method
1 Introduction
2 Materials and Methods
3 Results and Discussion
4 Summary
References
Attenuation of the Vibration Amplitude of the Crew Seat Suspension System
1 Introduction
2 Model Descriptions
3 Results and Discussion
3.1 Steady State Analysis at Resonance Frequency and Near the Resonance Frequency
3.2 Optimized Current Extraction Using PD Controller
3.3 Optimizing Current Near the Resonance Frequency
4 Conclusions
References
Characterization of Sommerfeld Effect of a 4-Pole Legs Active Magnetic Bearing Rotor-Motor System
1 Introduction
2 Mathematical Modelling
3 Results and Discussion
4 Conclusion
References
Analysis of Diffusion of Synthetic Wound Antimicrobials from PVA Hydrogel Using Free Volume Theory
1 Introduction
2 Methodology
3 Results
4 Conclusion
References
Additive Manufacturing of Magnesium Alloys for Biomedical Applications
1 Introduction
1.1 Additive Manufacturing of Magnesium-Why?
1.2 Challenges Faced with the Additive Production of Magnesium
2 Magnesium Alloy Powder Bed Fusion
3 Additive Manufacturing of Magnesium Using a Wire Arc
4 Friction Stir Magnesium Additive Manufacturing
5 Summary and Conclusion
References
Analysis of Copper Reinforcement Effect on Epoxy-Based Shape Memory Polymer for Smart Actuators
1 Introduction
2 General Specifications
2.1 Materials
2.2 Fabrication
2.3 Characterization and Testing
3 Results and Discussion
3.1 Tensile Test
3.2 Fracture Toughness Test
3.3 Flexural Test
3.4 Shape Memory Behavior Test
4 Conclusion
References
Numerical Simulation of Flow Developed During Shirodhara
1 Introduction
2 General Specifications
3 Numerical Model
4 Results
5 Conclusion
References
Optimal Orientation Transfer of a Rigid Body
1 Introduction
2 Paths Considered for Re-orientation
3 Comparison Between Paths of Re-orientation
4 Variation of Optimal Path According to the Variation of Moment of Inertia in Major Axes
5 Conclusions
References
Thermal Analysis of Laminar Heat Transfer in Double-Layer Micro-Channel Heat Sink with Different Cross-Section
1 Introduction
2 Problem Formulation
3 Methodology and Procedure
3.1 Governing Equations
4 Result and Discussion
4.1 Temperature Distribution Along the Length
4.2 Effect of Convective Heat Transfer Coefficient (HTC) and Reynolds Number
4.3 Pressure Drops in Micro-Channel
5 Conclusions
References
Water Lifting Posture Study in Rural Area by Using Ergonomics and Biomechanical Tools
1 Introduction
2 Objective of the Study
3 Research Methodology
3.1 Assessment Analysis
4 Result and Discussion
5 Conclusions
Appendix 1: Rapid Upper Limb Assessment (RULA)
Appendix 2: Rapid Entire Body Assessment (REBA)
References
Parametric Study on Straight PSC Box-Girder Bridges
1 Introduction
2 Validation and Convergence Study
3 Results and Discussion
3.1 Vertical Deflection and Stress Under Different Live Loads for Single-Cell PSC Box-Girder
3.2 Stresses and Vertical Deflection Obtained in Single-, Double-, Triple- and Four-Celled PSC Box-Girder Bridge Under 70-R Tracked Vehicle
4 Conclusions
References
A Numerical Investigation on Thermo-Mechanical Behaviour of Geothermal Energy Pile in Dry Sand
1 Introduction
2 Numerical Analysis
3 Results and Discussion
4 Conclusions
References
Effect of Shear Correction Factor on Free Vibration Analysis of Symmetric and Antisymmetric Sandwich Plates
1 Introduction
2 Mathematical Formulation
3 Results and Discussion
4 Conclusions
References
Experimental Analysis of Aluminum PMEDM of Nimonic C-263
1 Introduction
2 Materials and Methods
3 Results and Discussion
4 Conclusions
References
Effect of Titanium Powder Mixed Dielectric During EDM of Nimonic C-263
1 Introduction
2 Materials and Methods
3 Results and Discussion
4 Conclusions
References
Membrane Solutions for Metallic Toroidal Pressure Vessels
1 Introduction
2 Analytical Solution
2.1 Linear Membrane Solution
2.2 Modified Linear Membrane Solution
3 Illustrative Example
4 Conclusions
References
Numerical Simulation Approach for Low-Velocity Impact Response of Bioinspired Layup Design in GFRP Laminates
1 Introduction
2 Finite Element Analysis
2.1 Problem Statement
2.2 Design Description
2.3 Numerical Simulation
3 Results and Discussion
3.1 Impact Response
3.2 Energy Absorption
3.3 Damage Area Inspection
4 Conclusion
References
Seismic Structural Health Monitoring of Industrial Structure: A Study
1 Introduction
2 Research Significance
3 Methodology
4 Results and Discussion
5 Conclusion
References
Cost-Effective Earthquake-Resistant Design of Industrial Steel Structure
1 Introduction
2 Case Study Description
3 Modal and Time History Analysis
4 Bill of Quantities
5 Comparison Chart
6 Results and Discussion
7 Conclusion
References
Study of Representative Volume Elements in Terms of Morphology
1 Introduction
2 Experiments
3 Parameter Identification
4 RVE Simulations
5 Results and Discussion
6 Summary
References
Simulation Study on Material Gradation of Functionally Graded Beams
1 Introduction
2 Simulation Model
3 Conclusion
References
Systematic Procedure for Selection of Candidate Materials for Microspines
1 Introduction
2 Terrain
3 Load Carrying Analysis
4 Anchoribility Test
5 Experimental Results and Interpretation
6 Conclusion
References
Study on the Response Characteristics of a Quadcopter for Various Propeller Configurations
1 Introduction
2 Simulation
3 Ansys
4 Mathematical Model
5 Simulink
6 Results and Conclusion
7 Observations
References
Calibration of Impact Penetration Model for Bi-layer Ceramic-Metal Armour
1 Introduction
2 Semi-analytical Models
3 Present Work
4 Methodology
5 Calibration and Results
6 Summary
References
Effect of Fiber Volume Fraction on the Mechanical Properties of NFRP Composites
1 Introduction
2 Materials
3 Methodology for Fabrication of Composite Plate
4 Testing of Composite Samples
4.1 Tensile and Compressive Tests
5 Results and Discussion
6 Concluding Remarks
References
Size-Dependent Nonlinear Vibration Analysis of Electrostatically Excited Bi-directional Functionally Graded Microbeam Mass Sensor
1 Introduction
2 Mathematical Modelling
2.1 Material Modelling
2.2 Governing Equations of Motion
2.3 Solution Procedure
3 Numerical Results
4 Summary
References
Design and Analysis of Solid Rocket Motor Casing
1 Introduction
2 Design and Analysis of Solid Rocket Motor Case
3 Structural and Temperature Analysis
4 Conclusion
References
Dynamic Characteristic Analysis of Functionally Graded Beams
1 Introduction
2 Mathematical Modelling of FG Beam
3 Beam Property and Geometry
4 Results and Discussions
4.1 Natural Frequencies
4.2 Trends in Mode Shapes
5 Summary
References
Modelling of Antenna Control Servo System Using Simscape
1 Introduction
1.1 Antenna Control Servo System (ACSS)
2 Literature Review
3 Servo Control System
4 Single-Axis Servo Control System
5 Dual-Axis Servo Control System
6 Results and Discussions
7 Conclusions
References
Design and Analysis of Rocket Motor Nozzle
1 Introduction
2 Design of Rocket Motor Nozzle
3 Boundary Conditions for Analysis
4 Results and Discussion
4.1 Mach Number Variation Across the Nozzle
4.2 Static Pressure and Temperature Variations Across the Nozzle
5 Conclusion
References
Force Vibration Response of 3D Braided Spherical Shell Using 3D Finite Element Methods
1 Introduction
2 Mathematical Modeling
2.1 FEM Formulation
3 Results and Discussion
3.1 Effect of Volume Fraction and Boundary Conditions
3.2 Effect of Braided Angles
4 Conclusions
References
Atomistic Investigation of Mechanical Properties of Fe-Cr-Ni Alloy Using Molecular Dynamics Simulation
1 Introduction
2 Simulation Methodology
3 Results and Discussion
4 Conclusions
References
Investigation on the Nonlinear Energy Transfer Rates for Spline Fitted Wave Spectra with Varied Peakedness
1 Introduction
2 Parametric Wave Spectra
3 Computation of Nonlinear Source Term Using GLQM
4 Results and Discussion
5 Conclusion
References
Material Properties Predictions Using Data-Driven Technology
1 Introduction
2 Methodology
2.1 Data Processing
2.2 Feature Engineering
2.3 Modeling
3 Results
4 Conclusion
References
Chaotic Complexity Determination of Surface EMG Signals
1 Introduction
2 Methodology
2.1 sEMG Signal Acquisition
2.2 Chaotic Analysis of sEMG Signals
3 Results and Discussion
4 Conclusion
References
Numerical Investigation of Leakage in Elastomeric O-rings
1 Introduction
2 Design of Experimental Setup
3 Material Modelling of an O-ring
4 Interface Crack Propagation Analysis for Leakage Analysis
5 Numerical Model of Seal Assembly
6 Application of Fluid Pressure Using Interface Crack Propagation Analysis
6.1 Repulsive Force
6.2 Pressure Penetration
7 Results and Discussion
8 Conclusion
References
Dynamic Indentation-Based Estimation of Thenar Muscle Viscoelasticity in Dominant and Non-dominant Hands
1 Introduction
2 Methodology
2.1 Experimental Protocol
2.2 Myotonometric Parameters
2.3 Statistical Analysis
3 Results
4 Conclusion
References
Automated Analysis of Structural Alterations in Microscopic Cellular Images for Identification of Cytotoxicity Using Texture Feature Descriptors
1 Introduction
2 Methodology
2.1 Image Dataset
2.2 Feature Extraction
2.3 Statistical Analysis
2.4 SVM
3 Results
4 Conclusion
References
Free Vibration Analysis of Porous Functionally Graded Material Sandwich Folded Plates
1 Introduction
2 Mathematical Formulation
3 Results and Discussion
4 Conclusion
References
Effect of Operating Parameters on Performance of TEG Used in VCR Diesel Engine
1 Introduction
2 Methodology
3 Results
4 Conclusions
References
Gear Profile with Synthetic Curves: A Comparison Study
1 Introduction
2 Involute Gear Design Fundamentals
3 Design Methodology for Synthetic Tooth Profiles
3.1 Bezier Curve Tooth Profile
3.2 B-Spline Tooth Profile
3.3 NURBS Tooth Profile
4 Result and Discussion
5 Conclusion
References
Prediction of Surface Roughness in Wire Arc Additive Manufactured Components Using Machine Learning
1 Introduction
2 Methodology
3 Machine Learning Modeling
4 Results and Discussion
5 Summary
References
Investigation of the Failure Load in Riveted Lap Joints Made of Aluminum Alloys
1 Introduction
2 Method
3 Results
4 Finite Element Model
4.1 Material Damage Model
4.2 Geometry and Boundary Condition
4.3 Material Property
5 Results and Discussion
6 Conclusion
References

Systemvoraussetzungen

Als PDF speichern Als Link merken