Advanced Materials and Engineering Materials VI

Preface, Committee, Sponsor
Chapter 1: Advanced Ceramic and Glass Materials
Saman Tree Ash for Stoneware Glaze
Preparation of Cerium Dioxide Film by Anodization in Na2C2O4-NH3?H2O-H2O-(CH2OH)2 Electrolyte
Effect of Heat Treatment on the Crystal Structure of the Anodic Cerium Oxide Films
Experimental Research on Preparation Technics of High-Purity Quartz Material
Preparation of Bi2WO6 Powders with Micro-Carbon Spheres Acting as a Template by Refluxing Method
Chapter 2: Composites, Polymers and Hybrid Materials
A Molecular Dynamics Simulation Study on the Relationship between Hydrogen Bond and Damping Properties of AO-70/NBR Composites
Effect of DFA Modification on Thermal Properties of Multifunctional Epoxy/Anhydride Systems
Interaction between Polyaramidic Electrospun Nanofibers and Epoxy Resin for Composite Materials Reinforcement
Ply Orientation-Driven Path Planning with Multi Reference Paths for Robotic Fiber Placement on Mesh Surface
Flame Retardant Effect of a Modified Intumescent Flame Retardant on a Rigid Polyurethane Foam
A Comparison of the Polymer Matrix Behavior and Mechanical Properties of the Glass Reinforced Plastics and Glass Reinforced Epoxy Pipes under Different Oil Field Chemicals
Flexural Properties and Vibration Behavior of Jute/Glass/Carbon Fiber Reinforced Unsaturated Polyester Hybrid Composites for Wind Turbine Blade
Experimental Evaluation of the Chill Casting Method for the Fabrication of LM-25 Aluminum Alloy-Borosilicate Glass (p) Composites
Effect of Graphene Oxide on Non-Isothermal Melt Crystallization Kinetics of Poly(Trimethylene Terephthalate)
Influence of Zinc Oxide Nanograins on Properties of Epoxidized Natural Rubber Vulcanizates
An Alternative Crosslinking of Epoxidized Natural Rubber with Maleic Anhydride
Emission Spectra Analysis of Atmospheric Pressure DBD Plasma Being Processed by Polypropylene Non Woven Fabric
Biocompatible Tough Hydrogels via Micellar Copolymerization of NIPAM and Stearyl Acrylate: Synthesis and Characterization
Electrodeposition of Chitosan Composite Film and its Application for Protein Conjugation
Chapter 3: Materials for Photonics, Opto- and Microelectronics
Optical Characterization of Quaternary AlInGaN Multiquantum Wells
Polyester Gel Electrolyte with Three Dimensional Network for Efficient Quasi-Solid-State Dye-Sensitized Solar Cells
Analysis of Carrier Transport Mechanism for p-Type SnO Thin-Film Transistor
Fabrication of Macroporous Silicon in Organic Electrolytes and their Luminescence
Influence of Support Structure on the Ultraviolet Photoluminescence Enhancement from Graphene/ZnO Hybrid Structures
Structures, Dielectric Properties and Luminescence Properties of Nb Doped Li2TiO3 Solid Solution Ceramics
Studies on the Structure and Properties of ZnSb Thin Films Deposited under Various Sputtering Conditions
Preparation and Properties of Glutaraldehyde Cross-Linked Silk Sericin Films
Chapter 4: Nanomaterials and Nanofabrication
Effect of Preparation on Microstructure of Ag-Loaded TiO2 Nanotube Arrays
Fabrication of TiO2 by Rotating Horizontal Anodization and its CO2 Photoreduction Activity
Antiwear Behavior of CuO Nanoparticles as Additive in Bio-Based Lubricant
Chapter 5: Properties and Processing of Structural Metals and Alloys
Quasi-Static Compressive Characteristics of Cu-Containing Closed-Cell Aluminum Foams
Semisolid Strip Casting of Aluminum Alloy by a Twin Roll Caster Equipped with a Channel Scraper
Effect of Casting Conditions on Fabrication of Lotus Type Holes in Ingot Cast by Core-Bar Pulling Method
The Removal of Impurity Silicon from Aluminum Melt by the Addition of K2TiF6
Effect of Boosting Velocity on Forming Quality of High-Strength TA18 Titanium Alloy Tubes in Numerical Control Bending
Vertical Wall on an Aluminum Alloy Plate Fabricated by Friction Stir Forming
Multi-Objective Optimization in Electrical Discharge Machining of 6061 Al/SiCp Using RSM and NSGA-II
Fractal Characterization Analysis in CNC Milling Aluminium Alloy
Effects of Deformation and Annealing Temperature on the Microstructures and Hardness of Cu-29Zn-0.6Bi Brass
Study on Fractal Characterization Laws of Cutting Force in CNC Turning Aeronautic Aluminium Alloy 7075-T651
Study on Surface Roughness of Al2024 Alloy during Shot Peening Process Based on Finite Element Method
The Effects of Water Flow Rate on Copper Corrosion
Annealing Effects in Nanograined Al-Cu-Mg Alloy Processed by Equal Channel Angular Pressing
Effect of Quenching Treatment on Microstructure and Hardness of Mg-9Li-4Al-1Zn-0.5Y Alloy
Study on Aging Treatment Microstructure of Magnesium-Zinc Alloy
Experiments of Drilling Titanium Alloy with Varying Operation Parameters
Simulation of Stress Field in High-Frequency Welded Pipe of Composite Aluminum Alloy
Depth and Horizontal Distance of Surface Roughness Improvement on Vertical Surface of 3D-Printed Material Using Ultrasonic Cavitation Machining Process with Abrasive Particles
A Grinding Wheel of Self-Lubrication with Solid Powder Lubricant and Centrifugal Impeller for Green Grinding Process of TC4 Alloy
A Study of the Interaction between Abrasive Waterjet and Target by CFD and FEM Method
Ferrite-Martensite Dual Phase Treatment of AISI 1040 Steel and Mechanical Characterization
WELDOX960 Low Alloy High Strength Steel Welding Automation Manufacturability Research
Evaluation of the Fire Resistance for Beams Designed with Fire Resistant Steel through a Fire Engineering Method
Chapter 6: Building Materials
Mechanical Properties and Microstructure of Graphene-Cement Composites
Effect of Silica Fume and Fly Ash on Compressive Strength and Weight Loss of High Strength Concrete Material in Sulfuric and Acetic Acid Attack
Effect of Fibers Length and Fibers Content on the Splitting Tensile Strength of Coconut Fibers Reinforced Concrete Composites
The Evolution Analysis of Mechanical Properties of Marine Submerged Concrete Based on GRA
Effect of Carbon Dioxide Curing on Strength Development of Cement Mortar
Numerical Modeling on the Stress-Strain Behavior of Sand via Disturbed State Concept Model
Research Progress on the Effect of Stray Current on Properties of Cement-Based Materials in China
Study on the Effect of [Al13]7+ over the Free Swelling Ratio of Expansive Soil
Effectiveness of Non-Suction Controlled Method of Wetting-Drying Cycles for Unsaturated Compacted Loess Material
Chapter 7: Measurements and Modeling of Materials Properties and Behavior
Preparation of Polyaniline/Cu-BTC Composite and its Sensing Application for Ammonia
Quartz Crystal Microbalance Coated with 18-Crown-6 Ether Film for 2,4,6-Trinitrotolurene (TNT) Vapor Detection
Study on Methane Adsorption Capacity of Sensor Probe Based on Lead-Free Piezoelectric Resonance Modified by Zeolite X
New Methodology of Controlling Mechanical Properties of Materials
Molecular Dynamics Simulation of the Variation in the Microstructure of a Polycrystalline Material under Tensile Load
High-Precision Determination of Residual Stress of As-Sprayed and Ground WC-10Co-4Cr Coating Using Optimized XRD-sin2? Technique
Three-Dimensional Scanning Hall Probe Microscopy for Final Stage of Crack Growth of Chromium Molybdenum Steel SCM440
Measurement Model for Young's Modulus of Axially Functionally Graded Materials
Modified Method to Predict Fatigue Crack Shape Based on Empirical Observation
Chapter 8: Materials and Chemical Technologies in Environmental Engineering
Characterization and Photocatalytic Activity of SmMnO3 Prepared by Sol-Gel Process
Synthesis of TbMnO3 by Microwave Assisted Method and its Photocatalytic Activity
Preparation and Characterization of Pr2Ti2O7 by Sol-Gel Process
Preparation of Nanosized Ni2+-Doped ErFeO3 by Microwave Assisted Process and its Visible-Light Photocatalytic Activity
Tunable Fabrication of Electrospun Polyvinyl Alcohol Nanofibrous Membrances for Effective Air Filtration
Preparation and Characterization of YMnO3 by Microwave Assisted Process
Preparation of Cobalt Phthalocyanine Supported Mg-Al Hydrotalcite and its Catalytic Activity for Degradation of Methylene Blue
Chapter 9: Chemical Geology and Chemical Engineering
Investigation on Jurassic Shale Gas Reservoir Characteristics from Northern Qaidam Basin
Water-Rock-CO2 Interaction in Hot Dry Rock - A Review
Bioleaching and Desulfurization of Pyrite Roasting Residues by NB Bacteria for the Recovery of Cu, Zn and the Magnetic Materials
Simulation on the Compression Molding Process of Biomass Material