Advances in Mechanical Engineering, Materials and Mechanics

Name: Advances in Mechanical Engineering, Materials and Mechanics | Selected contributions from the 7th International Conference on Advances in Mechanical Engineering and Mechanics, ICAMEM 2019, December 16-18, 2019, Hammamet, Tunisia
Brand: Springer
Price: 149.79 EUR
Availability: OnlineOnly

Selected contributions from the 7th International Conference on Advances in Mechanical Engineering and Mechanics, ICAMEM 2019, December 16-18, 2019, Hammamet, Tunisia

Mohamed Kharrat Mounir Baccar Fakhreddine Dammak(Herausgeber*in)

Springer (Verlag)

Erschienen am 4. August 2020

XIII, 465 Seiten

E-Book

PDF mit Wasserzeichen-DRM

Systemvoraussetzungen

978-3-030-52071-7 (ISBN)

149,79 €inkl. 7% MwSt.

Systemvoraussetzungen

für PDF mit Wasserzeichen-DRM

E-Book Einzellizenz

Als Download verfügbar

Beschreibung

Weitere Details

Weitere Ausgaben

Inhalt

Intro
Preface
Contents
I Applied Mechanics
Dynamic and Post-buckling Analysis of Structures Like-Shell Using a Quadrilateral Shell Element with In-plane Drilling Rotational Degree of Freedom and a Conservative Implicit Time Integration Scheme
Abstract
1 Introduction
2 The Nonlinear Dynamic Updated Lagrangian Formulation for the Flat Shell Element
3 The Conservative Time Integration Scheme
4 Results
4.1 Non-linear Dynamic Analysis of a Clamped-Free Half-Cylinder Shell
4.2 Post Buckling of a Spherical Shallow Shell
5 Conclusion
References
Influence of Material Gradient Index on Stress Distribution of Functionally Graded Dental Implants
Abstract
1 Introduction
2 Modeling and Materials
2.1 Finite Element Analysis
2.2 FGM Implant
3 Results and Discussions
4 Conclusion
Acknowledgments
References
Parameter Identification of a Viscohyperelastic Constitutive Model for Fiber Reinforced Thermoplastic Composites
Abstract
1 Introduction
2 Specimens and Experimental Device
3 Constitutive Modeling
4 Parameter Identification
5 Result and Discussion
6 Conclusion
Acknowledgments
References
I Industrial Applications and Technology Transfer
The Importance of Ergonomic Risk and the Methods to Follow for a Problem of Assembly Line Balancing
Abstract
1 Introduction
2 Literature Review
3 Problem Formulations for Assembly Line Balancing Considering Ergonomic Risk
4 Conclusion
References
Modeling of the Cutting Effort
Abstract
1 Introduction
2 Materials and Experiences
2.1 Strategy of the Study
2.2 Tests Conditions
3 Results and Discussion
3.1 Average Effects of Cutting Parameters
3.2 Interactions of the Cutting Parameters
3.3 Modeling of Fc According to the Parameters of Division
4 Conclusion
Bibliography
Improving Performance of Production Lines: Integration of Maintenance and Quality Policies: A Literature Review
Abstract
1 Introduction
2 Analyses and Method
2.1 Evolution of the Integration Strategy of Production Policy, Maintenance and Quality
2.2 Integration of Production Control, Quality and Maintenance Policies
Developed Approaches
3 Results and Discussion
3.1 Summary on Existing Models
3.2 Research Perspectives
4 Conclusion
Acknowledgments
References
I Design and Manufacturing
The Impact of Abrasive Water Jet Cutting on Tensile Behavior of Woven Fabric CFRP
Abstract
1 Introduction
2 Experimental Work
2.1 Material and Specimens
2.2 Experimental Set-up
2.3 Testing Procedure
3 Experimental Results and Discussion
4 Conclusion
References
Modeling of Heat Transfer and Transport Phenomena During Laser Welding Of Aluminum/Magnesium Alloys
Abstract
1 Introduction
2 Experiences
3 Description of Numerical Procedure
4 Results
5 Comparison Model/Experience
6 Conclusion
References
Optimal Planning of Multi-pass Turning Operations
Abstract
1 Introduction
2 Problem Formulation
3 Application Example
4 Conclusion
References
Ductile Damage Prediction of DD13 Sheet Material in Single Point Incremental Forming Process
Abstract
1 Introduction
2 Plasticity of Non-associated Model with Ductile Damage
3 Finite Element Modeling
4 Numerical Results
5 Conclusion
References
Effect of Shot Peening Parameters on Parabolic Leaf Spring's Residual Stress
Abstract
1 Introduction
2 Experimental Procedure
3 Results and Discussion
4 Conclusions
Acknowledgments
References
Influence of Sliding Speed and Normal Loads on the Wear Resistance of Hardox 500 Steel Ground Surfaces
Abstract
1 Introduction
2 Experimental Set-up
3 Results
4 Conclusion
References
Development of STEP-NC Compliant Manufacturing for Machining Strategies of Aeronautical Components
Abstract
1 Introduction
2 Modeling of Machining Strategies
2.1 Aeronautical Parts
2.2 Machining Features
2.3 Modeling by Express-G
3 Generation of STEP-NC for Aeronautical Workpiece
4 Conclusion
Appendix
References
Numerical Study for the Cutting of Unidirectional CFRP
Abstract
1 Introduction
2 Macromechanical Model
2.1 Description of the FE Model
2.2 Materiel Behavior
3 Results and Discussion
3.1 Influence of Fiber Orientation Angle
3.2 Influence of Cutting Speed
4 Conclusion
References
2-Axis Tool Strategy Applied on NC Lathe Machine to Manufacture Revolved Parts by Means of SPIF Process
Abstract
1 Introduction
2 Experimental Setup
3 Results and Discussions
4 Conclusion
References
Evaluating Assembly Sequences with the Assembly Tools Operation Space Criteria
Abstract
1 Introduction
2 Developed Approach
2.1 Collected Data
2.2 Determined Data
2.3 Evaluate the ATOS of AT
3 Results
4 Conclusion
References
Evaluating the Capability Index of a Process Integrating Sampling Plan and the Measurement System Number of Distinct Categories NDC
Abstract
1 Introduction
2 Consideration of Sampling Involving Errors of the Measurement System
2.1 Measurement System Errors Integration
2.2 The Threshold Capability Index Calculation Considering NDC
3 Results and Discussion
3.1 Effect of Occurred Measurement System Errors on ppm Defective Items
3.2 DOE Establishment
3.2.1 Results
3.2.2 Measurement System Errors Effects on {\varvec C}_{{{\varvec p}0}}^{{\varvec *}}
4 Conclusion
References
Simulation of Low Velocity Impact of Epoxy-Flax Fibers Composite Using Solid Shell Finite Element
1 Introduction
2 Finite Element Formulation
3 Visco-Elastoplastic Constitutive Equations
4 Application to Low Velocity Impact
5 Conclusions
References
Finite Element Residual Stress Computation for Combined Grinding/Burnishing Applied to 100Cr6 Steel
Abstract
1 Introduction
2 Simulation of the Combined Grinding/Ball-Burnishing
2.1 Numerical Model
2.2 Finite Element Simulation
3 Residual Stress Results
4 Conclusions
Acknowledgments
References
Inspection on a Three-Dimensional Measuring Machine for a Virtual Model for Additive Manufacturing
Abstract
1 Introduction
2 Acquisition Systems for 3D Inspection
3 Coordinate Measuring Machine (MMT)
3.1 Description of a Coordinate Measuring Machine
4 Results for Measurement and Inspection of the Model Part
4.1 Measurement and Inspection Report
5 Conclusion
References
Simulation of the Local Heating Effect on Incremental Sheet Forming Process
Abstract
1 Introduction
2 Process Simulation
3 Results and Discussions
3.1 Temperature Evolution During ISF Process
3.2 Damage Field Distribution
3.3 Incremental Forming with Global and Local Heating
4 Conclusion
References
A CAD Model for the Tolerancing of Non-rigid Parts Assemblies
Abstract
1 Introduction
2 State of the Art
3 The Tolerancing Approach of Non-rigid Parts Assemblies
4 Case Study
5 Conclusion
References
A Developed Static Model for Tool Deflection in Ball-End Milling
Abstract
1 Introduction
2 Tool Deflection Estimation by Analytical Method AM
3 Validation Proceedings
3.1 FEM3D Analysis
3.2 Experimental Analysis
4 Result and Discussion
5 Conclusion
References
I Thermal Sciences and Renewable Energy
Effect of Steam Explosion and Torrefaction Treatments of Wood Chips on the Heating Value of Pellets
Abstract
1 Introduction
2 Materials and Methods
2.1 Raw Wood Material
2.2 Torrefaction
2.3 Steam Explosion Process
2.4 Pelletization
2.5 Pellet Properties
3 Results and Discussion
3.1 Effect of Treatment on Pellet Density
3.2 Effect of Heat Treatment on Pellet Durability
3.3 Effect of Heat Treatment on Pellet HHV
4 Conclusions
Acknowledgments
References
A CFD Investigation of a Turbulent Flow in a Corrugated Plate Heat Exchanger
Abstract
1 Introduction
2 Computational Domain
3 Boundary Conditions
4 Mathematical Formulation and Meshing Grid
5 Numerical Results
6 Conclusion
References
CFD Simulation of CO2 Adsorption onto Activated Carbon for Gas Separation and Storage Applications
Abstract
1 Introduction
2 CFD Model
2.1 Geometry
2.2 Mathematical Model
2.3 Boundary Conditions
2.3.1 Inlet Condition
2.3.2 Heat Transfer Correlation
3 Results and Discussion
4 Conclusion
References
Enhancement of Fixed-Wing Space Drone Performance Through Thermoelectric Power Generation
Abstract
1 Introduction
2 Thermal Modeling
3 TEGs for a Martian Drone
4 Conclusions
References
Simulation of Cellulose Pyrolysis Kinetics
Abstract
1 Introduction
2 Kinetics of Thermal Degradation of Cellulose
3 Numerical Model
4 Initial Conditions
5 Results and Discussion
6 Conclusion
References
I Systems and Dynamics
Free Vibration Analysis of Torsional Line Shafts of Four-Stroke Engine
Abstract
1 Introduction
2 Diagram and Equivalent Model of the Motor Line Shafts
3 Equations of Free Vibrations
4 Natural Frequencies and Natural Mode Shapes
5 Free Vibrations Results
6 Conclusions
References
Stability Analysis of One Degree of Freedom System Equipped with Friction Vibration Absorber
Abstract
1 Introduction
2 Vibratory Model and Motion Equations
3 Stability Analysis
4 Conclusion
References
I Materials
Study of Fe-W-P Coating Performance Under Scratch Test: Modeling and Experiments
Abstract
1 Introduction
2 Materials and Methods
3 Result and Discussion
4 Conclusion
Acknowledgments
References
Corrosion Resistance Enhancement of AISI 304 Stainless Steel by Deep Rolling Treatment
Abstract
1 Introduction
2 Experimental Work
3 Results and Discussions
3.1 Microstructure
3.2 Phase Changes
3.3 Residual Stress
3.4 Corrosion Behavior
4 Conclusion
References
Numerical Simulation of Reciprocating Sliding Test: Effects of Surface Topography on the Wear Behavior
Abstract
1 Introduction
2 FE Modeling
3 Results and Discussion
4 Conclusion
References
Ni-Ti Superelastic Wire Coupled with Conventional Brackets During Bending Tests: Cross-section Effect Comparison
Abstract
1 Introduction
2 Experimental Procedure
3 Results and Discussion
4 Conclusion
Acknowledgments
References
A Comparative Investigation of the Tribological and the Mechanical Behavior of Polyester Powder Coatings Filled with Graphite Depending on the Filling Percentage and the Size of the Graphite Particles
Abstract
1 Introduction
2 Materials and Methods
2.1 Sliding Test
2.2 Scratch Test
3 Results and Discussion
3.1 Friction and Wear Behavior
3.2 Wear Mechanism
3.3 Scratch Test Analysis
4 Conclusion
References
Physicochemical, Morphological and Thermal Characterization of Composites Based on Olive Wood Flour
Abstract
1 Introduction
2 Materials and Method
2.1 Materials
2.2 Filler Characterization
2.3 Elaboration of Bio-composite
2.4 Scanning Electron Microscopy (SEM)
2.5 Thermo-Gravimetric Analyzes (ATG)
3 Results and Discussion
3.1 Morphology and Chemical Composition of Olive Wood Flour
3.2 Morphological and Thermal Characterization of Elaborate Bio-composites
4 Conclusion
References
A Comparative Study on the Physical and Mechanical Behavior of AA6082-T6 and AA5083- H116 Aluminum Alloys in Friction Stir Spot Welding
Abstract
1 Introduction
2 Thermo-Mechanical Modeling
2.1 Geometric Model and Boundary Conditions
2.2 Materials Properties
3 Results and Discussion
3.1 Temperature Results
3.2 Force and Torque Variation
4 Conclusion
Acknowledgments
References
Tribological Characterization of Composites Based on Si3N4 Ceramics
Abstract
1 Introduction
2 Materials and Experimental Procedure
3 Results
4 Conclusion
Acknowledgment
References
The Effect of the Loading Path History on the Fracture Loci
Abstract
1 Introduction
2 Ductile Fracture Criteria
3 Numerical Simulations: Results and Discussion
4 Conclusion
References
Characterization of CrAlN Films Synthesized by DC Reactive Magnetron Sputtering
Abstract
1 Introduction
2 Experimental Procedures
3 Results and Discussion
3.1 Microstructure and Morphology
3.2 Hardness
3.3 Friction Coefficient
3.4 Wear Volume and Critical Load
4 Conclusion
Acknowledgments
References
Mechanical Characterization of a Composite Sandwich Core Under Shear Stress Based on a Torsion Test
Abstract
1 Introduction
2 Torsional Rig Shear Test
3 Results and Discussion
4 Conclusion
References
Study of the Wear Behavior of HDPE-Molybdenum Disulphide Composites
Abstract
1 Introduction
2 Experimental Process
2.1 Materials
2.2 Techniques
2.2.1 Specimens Preparation
2.2.2 Tribological Test (Tribotester)
2.2.3 Characterization Technics
3 Results and Discussion
3.1 Friction Comportment
3.2 Wear Comportment
4 Conclusion
References
Microstructural and Mechanical Characterization of a Baby Diaper
Abstract
1 Introduction
2 Microstructural Characterization of the Top-Sheet
3 Mechanical Characterization of the Top-Sheet
4 Mechanical Characterization of the Baby Diaper
5 Conclusion
Acknowledgement
References
Numerical Modelling of Undulatory Elastic Behavior of Metallic Glasses Ribbon
Abstract
1 Introduction
2 Experimental Procedure and Results
3 Numerical Modeling of Undulatory Elastic Response
4 Conclusion
References
Application of the Acoustic Emission Technique for Damage Monitoring of 3D C/C
Abstract
1 Introduction
2 Experimental Procedure
2.1 Uniaxial Tensile Tests
2.2 Digital Image Correlation Technique
2.3 Acoustic Emission Method
3 Results
4 Conclusion
Acknowledgements
References
Composite Materials in Epoxy Resin Matrix Using Curaua Fibers
Abstract
1 Introduction
2 Materials and Methods
3 Results and Discussion
4 Conclusion
Acknowledgments
References
Composite Cross-Ply Laminates Stacking Sequence Effect on Post Flexural Fatigue Residual Strength
Abstract
1 Introduction
2 Experimental Procedure
2.1 Materials
2.2 Experimental Setup and Test Procedure
3 Results and Discussion
4 Conclusion
References
Impact Simulation of PA66-GF Composites Using Finite Solid Shell Element
Abstract
1 Introduction
2 Formulation of Solid Shell Element
3 Visco-Elastoplastic Model
4 Numerical Results
5 Conclusion
References
Application of Factorial Design to Study the Effect of Recycling of HDPE on Rheological and Mechanical Properties
Abstract
1 Introduction
2 Materials and Methods
2.1 Material
2.2 Material Processing
2.3 Methodology
2.4 Melt Flow Index (MFI)
2.5 Vicat Softening Temperature (Tvicat)
2.6 Tensile Test
3 Results and Discussion
3.1 Effect of Factors and Their Interactions on {\varvec \sigma}_{{\varvec m}} , {\varvec \sigma}_{{\varvec e}} , Tvicat and MFI
4 Conclusion
Acknowledgments
References
Viscoelastic Mechanical Behavior of Fresh Human Bone of Lower Limbs
Abstract
1 Introduction
2 Materials and Methods
2.1 Samples Collection and Preparation
2.2 Testing Machine
2.3 Relaxation Test
3 Results and Discussion
4 Conclusion
Acknowledgments
References
Insights into Researches on the Tribological, Microstructural and Micromechanical Properties of Thermoplastic Based Composites
Abstract
1 Introduction
2 Experimental Set up
2.1 Materials and Composites Preparation
2.2 Friction and Wear Characterizations
2.3 Micromechanical and Microstructural Characterizations
3 Results and Discussion
3.1 Friction and Wear Behavior
3.2 Scratch Test Results
3.3 Microstructure/Fracture Behavior
4 Conclusion
References
Mechanical Characterization of PP/Alfa Bio-composite Obtained by Thermocompression
Abstract
1 Introduction
2 Experimental Study
2.1 Materials
2.2 Alkaline Extraction
2.3 Elaboration of Bio-composite Material
2.4 Characterization
3 Results and Discussions
3.1 Chemical Analysis
3.2 Fibres Size Analysis
3.3 Mechanical Properties
3.4 Morphological Analysis
4 Conclusion
References
Modeling of Iron Based Shape Memory Alloys Behavior Within Finite Strain Formulation
1 Introduction
2 Thermomechanically Coupled Constitutive Model
3 Clausius Duhem Inequality
4 Uniaxial Tests Model Validation
5 Conclusion
References
Surface Properties and Adhesion Behavior of PVD Thin Film Using Multi-cyclic Nanoindentation and Scratch Test
Abstract
1 Introduction
2 Experimental Procedure
2.1 Film Deposition
2.2 Film Characterization
3 Results and Discussion
3.1 Morphological and Microstructural Properties
3.2 Mechanical Properties
3.3 Adhesion Behavior
3.4 Superficial Fatigue Behavior
3.4.1 Effect of Mutli-cyclic Loading Mode
3.4.2 Effect of Loading Speed
3.4.3 Degradation of Mechanical Properties
4 Conclusion
Acknowledgments
References
I Fluid Mechanics
Investigating the Free-Surface Flow Behavior Due to Sluice-Gate Maneuvers
Abstract
1 Introduction
2 Materials and Methods
3 Application, Results and Discussion
4 Conclusion
References
Effect of Anchor Conditions on Structural Responses During Fluid Transients in Pipelines
Abstract
1 Introduction
2 Materials and Methods
3 Results and Discussion
4 Conclusion
Acknowledgments
References
Investigation of Blade Exit Angle Effects on the Performance of a Centrifugal Pump
Abstract
1 Introduction
2 Pump Model
2.1 Fluid Governing Equations
2.2 Impeller Losses
3 Numerical Model
4 Results and Discussions
4.1 Numerical Model Validation
4.2 Effect of Blade Exit Angle on the Pump Performance Curves
5 Conclusion
References
New Proposed Design of Rotor Shaft Equipped with Blades Inside a SSHE
Abstract
1 Introduction
2 Computational Domain
3 Numerical Model
4 Boundary Conditions
5 Results and Discussions
6 Conclusion
References
Different Applied Boundary Condition Within SSHE Treating Non-Newtonian Shear Thinning Fluid
Abstract
1 Introduction
2 Computational Domain
3 Governing Equations
4 Boundary Conditions
5 Fluids and Materials Properties
6 Results and Discussions
7 Conclusion
References
Experimental Investigation of Air Conditioning in a Bi-climatic Room
Abstract
1 Introduction
2 Bibliographic Study of Wall Scale Tests
3 Experimental Device and Metrology
4 Studied Climate and Bi-climatic Rooms Management
4.1 Studied Climates
4.2 Results in Climatic Rooms Management
5 Conclusion
References
Numerical Study of Droplets Coalescence in an Oil-Water Separator
Abstract
1 Introduction
2 Modeling Parameters
3 Numerical Modeling and Results
3.1 Initial and Boundary Conditions
3.2 Results and Discussion
4 Conclusion
References
An Alternative Approach for Minimum Independent Loops Identification in Water Distribution Networks
Abstract
1 Introduction
2 Looped Network Analysis: Basic Formulae
3 Independent Loops Selection Algorithm
3.1 Overview on Related Algorithms
3.2 Steps of the Proposed Algorithm for Minimum Loops Selection
4 Case Studies
4.1 Simple Topology Test
4.2 Modena Network
5 Conclusion
References
Author Index

Systemvoraussetzungen

Als PDF speichern Als Link merken