Energy in Plastics Technology

Name: Energy in Plastics Technology | Theory and Practice
Brand: Hanser Publications
Price: 199.99 EUR
Availability: OnlineOnly

Theory and Practice

Wolfgang Kaiser Willy Schlachter(Autor*in)

Hanser Publications (Verlag)

1. Auflage

Erschienen am 11. September 2023

526 Seiten

E-Book

PDF mit Wasserzeichen-DRM

Systemvoraussetzungen

978-1-56990-920-1 (ISBN)

199,99 €inkl. 7% MwSt.

Systemvoraussetzungen

für PDF mit Wasserzeichen-DRM

E-Book Einzellizenz

Als Download verfügbar

Beschreibung

"Energy in Plastics Technology" provides, unlike any other book, the necessary fundamentals for dealing with thermotechnical issues in the processing of plastics, leading to efficient, robust, reliable, economical, and environmentally friendly processes for high-quality products. The following four areas are addressed:

- Methodical application of the essential fundamentals to practical problems. The focus is on the formulation of energy balances.
- Special emphasis is placed on the understanding of the first and second laws of thermodynamics, with their manifold implications.
- Access to key advanced technical literature, which can be highly theoretical, and forms the basis for advanced simulation methods, is provided.
- Analytical approaches for modeling processes (as opposed to numerical simulation methods) are covered, so that the influence of the essential process parameters can be better recognized, and correct results in terms of order of magnitude are obtained with reasonable effort.

These simplified considerations provide a valuable support for the preparation of experiments and numerical simulations and their critical evaluation. The fundamentals provided are applied - in exemplary calculation examples - to problems relevant to practice in the most important processing and forming methods.

The book is aimed at engineers and students working in plastics technology as well as technicians and plastics technologists.

Contents:
Part 1 - Introductory Fundamentals: Introduction, Material Behavior of Plastics, Thermodynamics, Fluid Mechanics I, Heat Transfer
Part 2 - Advanced Fundamentals: Steady-State Heat Conduction, Transient Heat Conduction, Thermodynamics of Air-Drying, Fluid Mechanics II, Recycling of Plastics
Part 3 - Practical Examples

Rezensionen / Stimmen

"'Energy in Plastics Technology' provides, unlike any other book, the necessary fundamentals for dealing with thermotechnical issues in the processing of plastics, leading to efficient, robust, reliable, economical, and environmentally friendly processes for high-quality products. [...] The focus is on energy consumption in the form of heat and work (economic and ecological aspects) as well as the resulting temperatures (quality aspect). The book is aimed at engineers and students working in plastics technology as well as technicians and plastics technologists." Technical Gazette, 30 6(2024)

"Nun gibt es das wertvolle, 2019 erstmals erschienene Werk auch in englischer Sprache. Es ist aber weit mehr als eine Übersetzung. Die beiden Autoren, als Kunststoffspezialist und Thermodynamiker bekannt, haben für diese Neuausgabe den Inhalt gründlich überarbeitet und angereichert und, wo sinnvoll, auch umgestellt. Unverändert ist das überzeugende Konzept des Buches. [...] Das ganze Buch ist durchdrungen von der Leitidee, die Ansprüche an die unverzichtbare Theorie mit den Bedürfnissen der Praktiker zu verbinden. Da dies hervorragend gelungen ist, eignet es sich bestens für Anwender, Lehrende und Lernende, die sich in der Kunststofftechnik mit Energiefragen zu befassen haben oder sich in die wichtige Thematik einarbeiten möchten." Prof. Johannes Kunz, kunststoffXtra.com, 25.03.2024

Weitere Details

Weitere Ausgaben

Personen

Inhalt

Intro
The Authors
Preface
Contents
List of Symbols
Greek Characters
Latin Characters
Part 1 Introductory Fundamentals
1 Introduction
1.1 The Importance of Energy Technology in Plastic Processing
1.2 Plastic Processing Stages
1.3 Logic for Processing Design
1.4 Required Fundamentals
1.4.1 Overview
1.4.2 System Analysis
1.4.3 Kinds of Systems
1.4.4 Methodology for Solving Thermal Systems Problems
1.5 Example B 1.1: Interaction with the Surroundings for System Boundaries A and B of System "Extruder"
2 Material Behavior of Plastics
2.1 Chemical Basics
2.1.1 Polymer Raw Material(s)
2.1.2 Additive(s)
2.1.3 Classification of Plastics
2.1.4 Bonding Forces in Macromolecular Systems
2.1.4.1 Main Valence Bonds
2.1.4.2 Secondary Valence Bonds
2.1.4.3 Mechanical Bonds
2.2 Physical Basics
2.2.1 Behavior of Plastics in the Solid State
2.2.1.1 Density ?
2.2.1.2 Specific Volume v
2.2.1.3 Thermomechanical Behavior
2.2.1.4 Time-Dependent Mechanical Behavior (Chrono-Mechanical Behavior)
2.2.2 Behavior of Plastics in the Viscous or "Molten" State
2.2.2.1 Viscosity Functions of Thermoplastic Melts
2.2.2.2 Time Behavior of Thermally Unstable Thermoplastic Melts and Reacting Molding Compounds
2.3 Thermodynamic Properties
2.3.1 Thermal Characteristic Data
2.3.1.1 Specific Heat Capacity cp
2.3.1.2 Specific Enthalpy h, Specific Enthalpy of Fusion hfus
2.3.1.3 Specific Entropy s
2.3.1.4 Thermal Conductivity ?
2.3.1.5 Thermal Diffusivity a and Thermal Effusivity b
2.3.1.6 Thermal Expansion
2.3.2 Measuring Methods for Determining Thermal Parameters
2.3.3 Energetic Approach
2.3.3.1 Resource Efficiency
2.3.3.2 Energy Balances in Thermodynamics
2.3.3.3 Energy Balances in Plastics Technology
2.3.3.4 Sankey Diagrams
2.3.3.5 Light Energy and Plastics Engineering
2.3.4 p-v-T Diagrams
2.3.4.1 Coefficient of Volume Expansion ßv
2.3.4.2 Compressibility ?
2.3.4.3 Process Sequence in the p-v-T Diagram for Injection Molding
2.4 The Ageing of Plastics
2.4.1 Ageing and Ageing Processes
2.4.2 Thermal Influences during Ageing of Plastics
2.4.3 Light Influences during Ageing of Plastics
2.5 Strain Energy and Elasticity of Solid Plastics
2.5.1 Work and Strain Energy
2.5.2 Elasticity Aspects of Solid Plastics
2.6 Example B 2.1: Simplified Modeling of Viscoelastic Behavior
2.7 Example B 2.2: Energetic Vibration Analysis Based on the Kelvin-Voigt Model
3 Thermodynamics
3.1 Overview
3.1.1 Four Laws of Thermodynamics
3.1.2 Substance Behavior and Equations of State
3.2 First Law of Thermodynamics for Closed Systems
3.2.1 Total Energy, Internal Energy, Mechanical Energy
3.2.2 Energy Balance for Closed Systems
3.2.3 Energy Transfer by Heat
3.2.4 Energy Transfer by Work
3.2.5 Compression/Expansion/Displacement Work and Quasi-Equilibrium Process
3.2.6 Reversible and Irreversible Processes
3.2.7 Friction Work
3.2.8 First Law for Closed Systems Subjected to Compression/Expansion at Constant Volume and Friction Work
3.2.9 First T ds Relation
3.3 First Law of Thermodynamics for Open Systems
3.3.1 Introduction
3.3.2 Mass Rate Balance
3.3.3 Flow Work, Enthalpy, and Energy Rate Balance
3.3.4 Special Case: Bernoulli Equation
3.3.5 Specific Heat Capacity at Constant Pressure
3.3.6 Second T ds Relation
3.3.7 First Law for Open Systems Subjected to Compression/Expansion and Friction Work
3.4 Plasticization of Plastics by Work
3.5 Chemical Reactions
3.5.1 Introduction
3.5.2 Some Definitions
3.5.3 Gibbs Free Energy in Reactions: Exergonic and Endergonic Reactions
3.5.4 Gibbs Free Energy in Reactions: Maximum Work
3.6 Example B 3.1: Heat Pump
3.7 Example B 3.2: Isentropic and Polytropic Changes of State of Ideal Gases
3.8 Example B 3.3: Filling a Compressed-Air Storage Tank
3.9 Example B 3.4: Thermodynamic Measurement Method for Centrifugal Pump
4 Fluid Mechanics I
4.1 Introduction
4.1.1 General Comments
4.1.2 Basic Flow Types
4.2 Classification of Viscous Fluids
4.2.1 Simple Shear Flow and Shear Viscosity
4.2.2 Elongational Flow and Elongational Viscosity
4.2.3 Physical Phenomena
4.2.3.1 Newtonian and Non-Newtonian Fluid Behavior, Experimental Observations
4.2.3.2 Remarks on the Tensorial and Vectorial Description
4.3 Introduction to Dimensional Analysis and Similarity Using the Example of Pipe Flow
4.3.1 Basic Considerations
4.3.2 Moody Diagram
4.3.3 Hydraulic Diameter
4.4 Fully Developed Laminar Flow of Newtonian Fluids in Channels of Simple Geometry
4.4.1 Circular Pipe
4.4.2 Slit and Rectangular Channel of Finite Width
4.5 Pressure Loss of Newtonian Fluids in Piping Systems
4.6 Example B 4.1: Pipe Flow - Pressure Loss and Increase of Temperature Due to Dissipation
4.7 Example B 4.2: Comments on the Friction Factor ?
4.8 Example B 4.3: Comments on the Evaluation of Model Tests
5 Heat Transfer
5.1 Overview and Definitions
5.2 Steady-State Conduction and Total Heat Transfer
5.2.1 Fourier's Law of Heat Conduction
5.2.2 Total Heat Transfer through Plane Walls
5.2.3 One-Dimensional Radial Heat Conduction
5.3 Heat Exchangers and Logarithmic Mean Temperature Difference
5.4 Convection - General Comments
5.5 Forced Convection
5.5.1 Internal Flow (Pipes, Channels)
5.5.2 External Flow (Flat Plate in Parallel Flow, Bodies in Crossflow)
5.5.3 Impinging Jets
5.6 Free Convection
5.7 Heat Transfer by Radiation
5.7.1 Introduction and Definitions
5.7.2 Blackbody Radiation
5.7.3 Emissivity, Absorptivity, Reflectivity, Transmissivity
5.7.4 Radiation Properties Interrelations
5.7.5 Radiative Exchange - Introduction
5.7.6 The Geometric View Factor
5.7.7 Blackbody Radiative Exchange
5.7.8 Radiative Exchange between Diffuse-Gray Surfaces
5.8 Example B 5.1: Critical Insulation Radius
5.9 Example B 5.2: Insulation of a Hot-Water Pipe
5.10 Example B 5.3: Cooling of a Sheet
5.11 Example B 5.4: Heat Loss of an Injection Molding Tool
5.12 Example B 5.5: Effect of Radiation Shields
Part 2 Advanced Fundamentals
6 Steady-State Heat Conduction
6.1 Heat Transfer from Extended Surfaces: Fins
6.1.1 Energy Rate Balance
6.1.2 Long Fin
6.1.3 Fin of Finite Length with Insulated Tip
6.1.4 Fin Efficiency and Fin Effectiveness
6.1.5 Longitudinal Conduction in Long Rods with Relative Motion
6.2 Example B 6.1: Fin and System Effectiveness
6.3 Example B 6.2: Cooling of a Polyamide Wire - Steady-State Analysis
7 Transient Heat Conduction
7.1 Introduction and Fourier's Equation of Heat Conduction
7.2 Introduction to One-Dimensional Conduction, Biot Number and Fourier Number
7.2.1 Initial Phase (Early Regime)
7.2.2 Late Phase (Late Regime)
7.2.3 Semi-Infinite Solid Body (Early Regime)
7.3 Contact Problem: Two Semi-Infinite Solids Brought into Interfacial Contact
7.4 Periodic Temperature Variations
7.5 Unidirectional Conduction in Simple Bodies - Introduction
7.6 Unidirectional Conduction in Simple Bodies - Plate
7.7 Unidirectional Conduction in Simple Bodies - Cylinder and Sphere
7.7.1 Infinite Cylinder
7.7.2 Sphere
7.8 Approximate Solutions for Plate, Cylinder, and Sphere
7.8.1 Introduction
7.8.2 Estimation of Cooling Time
7.8.3 Effective Thermal Diffusivity aeff
7.9 Example B 7.1: Cooling of a Polyamide Wire - Transient Analysis
7.10 Example B 7.2: Wall Thickness versus Cycle Time
7.11 Example B 7.3: Cooling of a Tool
7.12 Example B 7.4: PVC Film Cooling on Roller
8 Thermodynamics of Air-Drying
8.1 Introduction
8.2 Psychrometrics
8.2.1 Properties of Moist Air
8.2.2 Analyzing Elementary Processes
8.2.3 Characteristics of Moist Solids
8.2.4 Mass and Energy Rate Balance
8.3 Additional Aspects of Air-Drying
8.3.1 (De)Sorption Isotherm
8.3.2 Cooling Limit, Dry-Bulb, Wet-Bulb, and Adiabatic Saturation Temperatures
8.3.3 Time Course of Air-Drying Processes
8.3.3.1 Qualitative Considerations
8.3.3.2 Simplified Analysis of Drying Phase I
8.3.3.3 Analogy between Heat and Mass Transfer
8.3.3.4 Analysis of Air-Drying of Solids in Through-Flow and Overflow Arrangements (Conveyer Belt)
8.4 Example B 8.1: Granulate Drying
8.5 Example B 8.2: Adiabatic Saturation Temperature
8.6 Example B 8.3: Conveyer-Belt Dryer
9 Fluid Mechanics II
9.1 Introduction
9.2 Power-Law Model (Ostwald-de Waele)
9.3 Plane Drag and Pressure Flow of Newtonian Fluids between Parallel Plates
9.3.1 Velocity Profile
9.3.2 Temperature Profile of Pure Drag Flow
9.3.3 Consideration of Heat Flux in Pure Drag Flow
9.4 Plane Pressure Flow of Non-Newtonian Fluids between Parallel Plates
9.4.1 Velocity Profile
9.4.2 Temperature Profile
9.5 Axial Pipe Flow of Non-Newtonian Fluids
9.5.1 Velocity Profile
9.5.2 Temperature Profile
9.6 Newtonian Fluid in Axial Annular Flow
9.7 Pumping Power and Dissipation
9.8 Concluding Remarks
9.9 Example B 9.1: Friction Pump
9.10 Example B 9.2: On the Similarity Theory of Non-Newtonian Fluids
9.11 Example B 9.3: Emptying a Container
9.12 Example B 9.4: Viscous Pipe Flow: Pressure Drop and Temperature Increase
9.13 Example B 9.5: Temperature Profile for Viscous Pipe Flow
10 Recycling of Plastics
10.1 The Most Important Facts in Brief
10.2 Causes of Growth
10.2.1 The Petrochemical Industry as a Raw Material Supplier
10.2.2 Lightweight Plastics and Recycling
10.2.3 Energy-Efficient Behavior
10.2.4 Complex Molding Geometries and High Degree of Automation
10.2.5 Exploiting Synergies
10.2.6 High Added Value of Petroleum
10.3 Sustainable Development Goals (SDGs)
10.4 Waste Management and the Limits of Recycling
10.4.1 Waste and Recycling Hierarchy
10.4.2 Plastics and the Environment
10.4.2.1 Plastic Waste
10.4.2.2 Service Life of Plastics
10.5 Waste Management and Recycling from the Point of View of the Plastics Industry
10.6 Three Recycling Routes
10.6.1 Mechanical Recycling
10.6.1.1 The Crux of Mechanical (Materials) Recycling with Thermoplastics
10.6.1.2 Additives
10.6.2 Raw Material Recycling ("Depolymerization")
10.6.2.1 Thermochemical Processes/Pyrolysis
10.6.2.2 Solvolysis
10.6.2.3 Biotechnology
10.6.3 Energetic Recovery (E-Recycling)
10.6.3.1 Life Cycle Assessment (LCA)
10.6.3.2 Controlled Energetic Recovery
10.6.3.3 Energy Efficiency and Effectiveness of WTEs
10.6.3.4 Cement Industry
10.6.4 Energy Balances
10.7 Summary and Conclusions
10.8 Outlook
10.9 Example B 10.1: Energy Analysis of a WTE
Part 3 Practical Examples
11 Practical Examples
11.1 Energy Flow in Plastic Production
11.2 Energy Demand of Injection Molding Machines
11.3 Energy Balance of an Injection Molding Machine
11.4 Characteristics of a Nozzle
11.5 Granulate Drying
11.6 Friction Welding
11.7 Energy Storage of Pneumatic Accumulators
12 Appendix: Figures
Index

Inhalt (PDF)

Systemvoraussetzungen

Als PDF speichern Als Link merken