Building Physics: Heat, Air and Moisture
Fundamentals and Engineering Methods with Examples and Exercises
3. Auflage
Erschienen am 8. August 2017
348 Seiten
978-3-433-60857-9 (ISBN)
Beschreibung
Note: The 4th edition of this book has been published in September 2023.
Bad experiences with construction quality, the energy crises of 1973 and 1979, complaints about "sick buildings", thermal, acoustical, visual and olfactory discomfort, the need for good air quality, the move towards more sustainability - all these have accelerated the development of a field that, for a long time, was hardly more than an academic exercise: building physics (in English speaking countries sometimes referred to as building science). The discipline embraces domains such as heat and mass transfer, building acoustics, lighting, indoor environmental quality and energy efficiency. In some countries, fire safety is also included. Through the application of physical knowledge and its combination with information coming from other disciplines, the field helps to understand the physical phenomena governing building parts, building envelope, whole buildings and built environment performance, although for the last the wording "urban physics" is used. Today, building physics has become a key player on the road to a performance based building design.
The book deals with the description, analysis and modeling of heat, air and moisture transport in building assemblies and whole buildings with main emphasis on the building engineering applications, including examples. The physical transport processes determine the performance of the building envelope and may influence the serviceability of the structure and the whole building.
Compared to the second edition, in this third edition the text has partially been revised and extended.
Bad experiences with construction quality, the energy crises of 1973 and 1979, complaints about "sick buildings", thermal, acoustical, visual and olfactory discomfort, the need for good air quality, the move towards more sustainability - all these have accelerated the development of a field that, for a long time, was hardly more than an academic exercise: building physics (in English speaking countries sometimes referred to as building science). The discipline embraces domains such as heat and mass transfer, building acoustics, lighting, indoor environmental quality and energy efficiency. In some countries, fire safety is also included. Through the application of physical knowledge and its combination with information coming from other disciplines, the field helps to understand the physical phenomena governing building parts, building envelope, whole buildings and built environment performance, although for the last the wording "urban physics" is used. Today, building physics has become a key player on the road to a performance based building design.
The book deals with the description, analysis and modeling of heat, air and moisture transport in building assemblies and whole buildings with main emphasis on the building engineering applications, including examples. The physical transport processes determine the performance of the building envelope and may influence the serviceability of the structure and the whole building.
Compared to the second edition, in this third edition the text has partially been revised and extended.
Weitere Details
Weitere Ausgaben
Andere Ausgaben
Hugo S. L. Hens
Building Physics - Heat, Air and Moisture Fundamentals and Engineering Methods with Examples and Exercises 3e
Software
09/2017
Ernst & Sohn
99,09 €
Keine Lieferinformation verfügbar
Hugo Hens
Building Physics: Heat, Air and Moisture
Fundamentals and Engineering Methods with Examples and Exercises
Buch
09/2017
3. Auflage
Ernst & Sohn
69,00 €
Artikel ist vergriffen; siehe Neuauflage
Hugo Hens
Building Physics: Heat, Air and Moisture
Fundamentals and Engineering Methods with Examples and Exercises. (incl. E-BOOK as PDF)
Buch
09/2017
3. Auflage
Ernst & Sohn
89,00 €
Artikel ist vergriffen; siehe Neuauflage
Gesamtwerk / Teilwerk
Hugo Hens
Building Physics: Heat, Air and Moisture
Fundamentals and Engineering Methods with Examples and Exercises. (incl. E-BOOK as PDF)
Buch
09/2017
3. Auflage
Ernst & Sohn
89,00 €
Artikel ist vergriffen; siehe Neuauflage
Person
Dr. Ir. Hugo S.L.C. Hens is an emeritus professor of the University of Leuven (KULeuven), Belgium. Till 1972, he worked as a structural engineer and site supervisor at a medium-sized architectural office. In 1975, after defending his PhD thesis, he started the building physics research unit within the Faculty of Engineering of the university. He taught building physics from 1975 to 2003, performance based building design from 1975 to 2005 and building services from 1975 to 1977 and 1990 to 2008. He has authored and co-authored approx. 70 peer-reviewed journal papers and 170 conference papers, has helped to manage hundreds of building damage cases and acted as coordinator of the CIB W40 working group on Heat and Mass Transfer in Buildings from 1983 till 1993. Between 1986 and 2008, he was operating agent of the Annexes 14, 24, 32 and 41 of the International Energy Agency's EXCO on Energy in Buildings and Communities. He is a fellow of the American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE).
Inhalt
Introduction
0.1 Subject of the book
0.2 Building physics
0.3 Importance
0.4 History
0.5 Units
0.6 Symbols
1 Heat transfer
1.1 Overview
1.2 Conduction
1.2.1 Conservation of energy
1.2.2 The conduction laws
1.2.3 Steady state
1.2.4 Transient
1.3 Heat exchange at surfaces
1.4 Convection
1.4.1 In general
1.4.2 Typology
1.4.3 Quantifying the concevtive surface film coefficient
1.4.4 Values for the convective surface film coefficient
1.5 Radiation
1.5.1 In general
1.5.2 Definitions
1.5.3 Reflection, absorption and transmission
1.5.4 Radiant bodies
1.5.5 Simple Formulae
1.6 Building-related applications
1.6.1 Surface film coefficients and reference temperatures
1.6.2 Steady state: flat assemblies
1.6.3 Local inside surface film coefficients
1.6.4 Steady state: two and three dimensions
1.6.5 Heat balances
1.6.6 Transient
1.7 Problems and solutions
2 Mass Transfer
2.1 Generalities
2.1.1 Quantities and definitions
2.1.2 Saturation degrees
2.1.3 Air and moisture transfer
2.1.4 Moisture sources
2.1.5 Air and moisture in relation to durability
2.1.6 Link to energy transfer
2.1.7 Conservation of mass
2.2 Air
2.2.1 Overview
2.2.2 Air pressure differentials
2.2.3 Air permeances
2.2.4 Airflow in open-porous materials
2.2.5 Airflow across assemblies with air-open layers, leaky joints, leaks and cavities
2.2.6 Air transfer at the building level
2.2.7 Combined heat and air flow in open-porous materials
2.3 Vapour Transfer
2.3.1 Water vapour in the air
2.3.2 Water vapour in open-porous materials
2.3.3 Vapour transfer in the air
2.3.4 Vapour flow by diffusion in open-porous materials and assemblies
2.3.5 Vapour flow by diffusion and convection in open-porous materials and assemblies
2.3.6 Surface film coefficients for diffusion
2.3.7 The surface film coefficient for diffusion applied
2.4 Moisture
2.4.1 Overview
2.4.2 Water flow in a pore
2.4.3 Vapour flow in a pore that contains water isles
2.4.4 Moisture flow in a pore that contains water isles
2.4.5 Moisture flow in materials and assemblies
2.4.6 Simplified moisture flow model
2.5 Problems and solutions
3 Combined Heat, Air and Moisture Flow
3.1 Introduction
3.2 Material and assembly level
3.3 Whole building level
3.4 Problems and solutions
Postscript
0.1 Subject of the book
0.2 Building physics
0.3 Importance
0.4 History
0.5 Units
0.6 Symbols
1 Heat transfer
1.1 Overview
1.2 Conduction
1.2.1 Conservation of energy
1.2.2 The conduction laws
1.2.3 Steady state
1.2.4 Transient
1.3 Heat exchange at surfaces
1.4 Convection
1.4.1 In general
1.4.2 Typology
1.4.3 Quantifying the concevtive surface film coefficient
1.4.4 Values for the convective surface film coefficient
1.5 Radiation
1.5.1 In general
1.5.2 Definitions
1.5.3 Reflection, absorption and transmission
1.5.4 Radiant bodies
1.5.5 Simple Formulae
1.6 Building-related applications
1.6.1 Surface film coefficients and reference temperatures
1.6.2 Steady state: flat assemblies
1.6.3 Local inside surface film coefficients
1.6.4 Steady state: two and three dimensions
1.6.5 Heat balances
1.6.6 Transient
1.7 Problems and solutions
2 Mass Transfer
2.1 Generalities
2.1.1 Quantities and definitions
2.1.2 Saturation degrees
2.1.3 Air and moisture transfer
2.1.4 Moisture sources
2.1.5 Air and moisture in relation to durability
2.1.6 Link to energy transfer
2.1.7 Conservation of mass
2.2 Air
2.2.1 Overview
2.2.2 Air pressure differentials
2.2.3 Air permeances
2.2.4 Airflow in open-porous materials
2.2.5 Airflow across assemblies with air-open layers, leaky joints, leaks and cavities
2.2.6 Air transfer at the building level
2.2.7 Combined heat and air flow in open-porous materials
2.3 Vapour Transfer
2.3.1 Water vapour in the air
2.3.2 Water vapour in open-porous materials
2.3.3 Vapour transfer in the air
2.3.4 Vapour flow by diffusion in open-porous materials and assemblies
2.3.5 Vapour flow by diffusion and convection in open-porous materials and assemblies
2.3.6 Surface film coefficients for diffusion
2.3.7 The surface film coefficient for diffusion applied
2.4 Moisture
2.4.1 Overview
2.4.2 Water flow in a pore
2.4.3 Vapour flow in a pore that contains water isles
2.4.4 Moisture flow in a pore that contains water isles
2.4.5 Moisture flow in materials and assemblies
2.4.6 Simplified moisture flow model
2.5 Problems and solutions
3 Combined Heat, Air and Moisture Flow
3.1 Introduction
3.2 Material and assembly level
3.3 Whole building level
3.4 Problems and solutions
Postscript
