Physics and Engineering of Metallic Materials

Name: Physics and Engineering of Metallic Materials | Proceedings of Chinese Materials Conference 2018
Brand: Springer
Price: 223.63 EUR
Availability: OnlineOnly

Proceedings of Chinese Materials Conference 2018

Yafang Han(Herausgeber*in)

Springer (Verlag)

1. Auflage

Erschienen am 14. Februar 2019

XXXIII, 733 Seiten

E-Book

PDF mit Wasserzeichen-DRM

Systemvoraussetzungen

978-981-13-5944-6 (ISBN)

223,63 €inkl. 7% MwSt.

Systemvoraussetzungen

für PDF mit Wasserzeichen-DRM

E-Book Einzellizenz

Als Download verfügbar

Beschreibung

Weitere Details

Weitere Ausgaben

Inhalt

Intro
Preface
Contents
Contributors
Microstructures and Mechanical Properties of Extruded and Aged Mg-4Zn-2Al-2Sn-(0.6Mn) Alloy
1 Introduction
2 Experimental Procedure
3 Results and Discussion
3.1 The Microstructures of the ZAT422 and ZATM4220 Alloys
3.2 The Mechanical Properties of the As-extruded and As-aged ZAT422 and ZATM4220 Alloys
4 Conclusions
References
Microstructural Evolution of an Al-Zn-Mg-Cu Aluminum Alloy During an Optimized Two-Step Homogenization Treatment
1 Introduction
2 Experimental Procedure
3 Results and Discussion
4 Conclusions
References
Microstructural Evolution and Phase Transformation of Al-Mg-Si Alloy Containing 3% Li During Homogenization
1 Introduction
2 Experimental
3 Results and Discussion
3.1 As-cast Microstructure
3.2 DSC Analysis
3.3 Microstructural Evolution During Homogenization
4 Conclusions
References
Study on Stabilization Treatment of Al-Mg Alloy 5E83-H112
1 Introduction
2 Materials and Methods
3 Results and Discussion
3.1 Tensile Properties
3.2 EBSD Analysis
3.3 Intergranular Corrosion and Exfoliation Corrosion
3.4 Stabilization Treatment
3.5 TEM Microstructure
4 Conclusions
References
Simulation and Experimental Study on Hot Forging Process of SiCp/2A14 Composite
1 Introduction
2 Experimental Section
2.1 Numerical Simulation
2.2 Experimental Process
3 Results and Discussion
3.1 Formability
3.2 Microstructure and Mechanical Properties
4 Conclusions
References
Effect of Boron Addition Methods on Microstructure and Mechanical Properties of a Near-a Titanium Alloy
1 Introduction
2 Materials and Experimental
3 Results and Discussion
3.1 Effect of Boron Addition on Microstructure
3.2 Reaction of B/TiB2 in Titanium Alloys
3.3 Grain Refinement Mechanism
3.4 Mechanical Properties
4 Conclusions
References
Effect of Ultrasonic Treatment on Microstructure and Properties of Aluminum Alloy Rod Prepared by Continuous Casting and Rolling
1 Introduction
2 Experimental
3 Results and Discussion
3.1 Microstructure
3.2 Electrical Conductivity
3.3 Mechanical Properties
4 Conclusions
References
Influence of High-Temperature Compression on Microstructure and Properties of Sintered Molybdenum
1 Introduction
2 Experiment
2.1 Materials
2.2 Experimental Method
2.3 Measurements and Characterization
3 Results and Discussion
3.1 Density
3.2 Vickers Hardness
3.3 Microstructure
3.4 Textures
4 Conclusion
References
Microstructure and Mechanical Properties of a Ti-Al-Sn-Zr-Mo-Nb-W-Si High-Temperature Titanium Alloy
1 Introduction
2 Experimental
3 Results and Discussion
3.1 Microstructures After Different Heat Treatments
3.2 Mechanical Properties After Different Heat Treatment
4 Conclusions
References
Optimization of Cold-Rolling-Stabilization Process for High Mg-Containing Al Alloy
1 Introduction
2 Experimental
2.1 Material Preparation
2.2 Characterization
3 Results and Discussion
3.1 Microhardness
3.2 Tensile Properties
3.3 Long-Term Corrosion Performance of 5E61 Alloy in Different Stabilized Annealed States
3.4 Exfoliation Corrosion Performance Test
3.5 TEM Observation
4 Conclusions
References
Flow Stress Behavior and Microstructural Evolution of a High-Alloying Al-Zn-Mg-Cu Alloy
1 Introduction
2 Experimental
3 Results and Discussion
3.1 Flow Stress Behavior
3.2 Microstructural Evolution
4 Conclusion
References
Influence of Space Environment on the Properties of Diamond/Cu Composites
1 Introduction
2 Experimental Procedure
3 Results and Discussion
3.1 Microstructure of Fracture of Diamond/Cu Composites
3.2 Effect of Particle Irradiation on Properties of Diamond/Cu Composites
3.3 Effect of Thermal Cycling on Properties of Diamond/Cu Composites
4 Conclusions
References
The Effects of Electron Beam Welding Parameters on Microstructure and Properties of GH4738 Alloy
1 Introduction
2 Experimental Procedures
3 Results
4 Conclusion
References
Microstructure and Grain Refining Performance of High-Quality Al-5Ti-1B Master Alloy
1 Introduction
2 Experimental Procedure
3 Results and Discussion
3.1 Chemical Composition
3.2 Microstructure
3.3 Grain Refining Performance
4 Conclusions
References
Effect of Cu Content on Microstructure and Properties of Al-Mg-Si Alloy
1 Introduction
2 Experimental
2.1 Material
2.2 Characterization
3 Results and Discussion
3.1 Age-Hardening Curve
3.2 Tensile Strength and Electrical Conductivity
3.3 Optical Microstructure
3.4 Tensile Fracture
3.5 HRTEM Observation
4 Conclusions
References
Corrosion Behavior of Inconel 625 Alloy in Na2SO4-K2SO4 at High Temperature
1 Introduction
2 Experimental
3 Results and Discussion
3.1 Hot Corrosion Behavior
3.2 Analysis of Corrosion Product
3.3 Mechanism Analysis of Hot Corrosion
4 Conclusion
References
Effects of Extrusion Conditions on Microstructure and Age-Hardening Behaviors of Al-Zn-Mg Alloy
1 Introduction
2 Experimental Procedure
2.1 Material and Processing Conditions
2.2 Experimental Methods
3 Results
3.1 Age-Hardening Behaviors
3.2 Microstructure
3.3 Mechanical Properties
4 Discussion
5 Conclusions
References
Process Optimization Design of High-Strength Ag-Cu-Ni Alloy Based on Orthogonal Experiments
1 Introduction
2 Experiments
3 Results and Discussion
3.1 Orthogonal Test and Range Analysis
3.2 Effects of Processing Parameters to the Alloy Mechanical Properties
3.3 Optimal Solution
4 Conclusion
References
Strain Distribution and Metal Flow of Bulk Forming of Molybdenum
1 Introduction
2 Experimental Procedure
3 Results and Discussion
3.1 FEM Analysis
3.2 Appearance
3.3 Mechanical Properties
3.4 Microstructural Investigation
4 Conclusions
References
Cold Deformation Behavior and Mechanical Properties of Forged Pure Nickel N6
1 Introduction
2 Material and Experimental
3 Cold Deformation Behavior of Pure Nickel N6
3.1 Work Hardening Rule of N6
3.2 Constitutive Equation of Pure Nickel N6
3.3 Calculation of Impact Toughness
4 Fracture Morphology Observation
4.1 Tensile Specimen Fracture Analysis
4.2 Impact Toughness Test Fracture Analysis
5 Conclusion
References
Microstructure and Properties of Graphene/Copper Matrix Composites Prepared by In Situ Reduction
1 Introduction
2 Experimental Materials and Methods
3 Results and Analysis
4 Conclusion
References
The Effect of Aluminum Content on the Microstructures of Single-Phase ?-TiAl-Based Alloy
1 Introduction
2 Materials and Experiment
3 Result
3.1 The Effect of Aluminum Content on the Microstructures of As-cast Alloys
3.2 The Effect of Aluminum Content on Microstructures and Grain Boundary Character Distribution of Homogenized Annealed Alloys
4 Conclusion
References
Effect of Al-Er-Zr Master Alloy on Grain Refinement After Heat Treatment
1 Introduction
2 Materials and Methods
3 Results and Discussion
4 Conclusions
References
Effect of In Situ TiB2 Particle Content on Microstructure and Properties of Cast Al-Si Alloy
1 Introduction
2 Materials and Methods
3 Experimental Results and Discussion
3.1 Analysis of Master Alloy
3.2 Microstructure of Composite Materials
3.3 Mechanical Properties of Composites
4 Conclusions
References
The Influence of Different Casting Methods on the Corrosion Resistance of Mg-Gd-Y Alloys
1 Introduction
2 Experimental Procedures
3 Results and Discussion
4 Conclusions
References
Effect of Cu Additions and Extrusion Treatment on the Microstructure and Mechanical Properties of Mg-6Sn-1Al Alloy
1 Introduction
2 Experimental Procedure
3 Results and Discussion
3.1 Microstructure
3.2 Mechanical Properties
4 Conclusions
References
Strain Rate Sensitivity of GH4720LI Alloy with Two Initial Microstructures During Hot Deformation
1 Introduction
2 Experimental
3 Results and Discussion
3.1 Initial Microstructures
3.2 Flow Stress Behavior
3.3 Strain Rate Sensitivity
4 Conclusion
References
Microstructure and Properties of Rare-Earth B4C-Copper Composites
1 Introduction
2 Experimental Materials and Experimental Methods
2.1 Preparation of the Modified B4C
2.2 Composite Preparation
2.3 Test and Characterization
3 Microstructure
3.1 Morphology of the Original Material
3.2 SEM of Composite Materials
4 TEM of Composite Materials
4.1 Interface of Composite Materials
4.2 Crystal Defect
5 Performance Analysis
6 Conclusion
References
Evaluation of Microstructure and Refining Effect of Al-TiB2 and Al-5Ti-1B Grain Refiners
1 Experimental Materials and Methods
2 Results and Analysis
2.1 Phase Analysis of Al-5Ti-1B Grain Refiners and Al-TiB2 Grain Refiners
2.2 Microstructure Analysis of Al-5Ti-1B Refiner and Al-TiB2 Refiner
3 Refining Effect and Refining Mechanism of Al-5Ti-1B Grain Refiner and Al-TiB2 Grain Refiner
3.1 Effect of Addition Amount on Refining Effect of Al-5Ti-1B Grain Refiner
3.2 Effect of Addition Amount on Refining Effect of Al-TiB2 Grain Refiner
4 Conclusions
References
Effects of Graphene Content and Aging Process on Mechanical Properties and Corrosion Performance of an A356.2 Aluminum Matrix Composite
1 Introduction
2 Experimental Details
3 Result and Discussion
4 Conclusion
References
Microstructure and Performance of WAAM TiB2-Reinforced Al-Si-Based Composites
1 Introduction
2 Experiment
2.1 Manufacture
2.2 Material Characterization
3 Results and Discussion
3.1 Microstructure
3.2 Heat Treatment
4 Conclusions
References
Characterization of Graphene/Cu Composites Prepared by CVD and SPS
1 Introduction
2 Experiment
3 Results and Discussion
4 Conclusion
References
Hot Deformation Behavior of the As-Cast Mg-10.13Li-2.83Zn-2.78Al-0.13Si Alloy
1 Introduction
2 Experimental
3 Results and Discussion
3.1 Microstructure of the Alloy
3.2 Flow Stress Curves
3.3 Processing Map
4 Conclusions
References
Fatigue Behavior of Thermal Barrier Coated DD6 Single Crystal Superalloy at 900 °C
1 Introduction
2 Experiment
3 Results and Discussion
3.1 Metallographic Examination
3.2 S-N Curves
3.3 Fractograph
4 Conclusions
References
Microstructure and Room-Temperature Fracture Toughness of Nb-Ti-Si In Situ Composite Prepared by Selective Laser Melting
1 Introduction
2 Experimental
3 Results and Discussion
3.1 Microstructure and Chemical Composition
3.2 Room-Temperature Fracture Toughness
4 Conclusion
References
Simulation and Experimental Study on the Directional Solidification Process of a Single-Crystal Superalloy Plate Casting
1 Introduction
2 Mathematical Models
2.1 Temperature Field Model
2.2 Microstructure Model
3 Experimental Procedures
4 Results and Discussion
4.1 Temperature Distribution
4.2 Spiral Selector
4.3 Microstructural Evolution
5 Conclusions
References
Influence of Mo Content on the Microstructure Stability and Stress Rupture Properties of a Single Crystal Superalloy
1 Introduction
2 Experiment
3 Results and Analysis
3.1 Microstructure
3.2 Stress Rupture Properties
4 Conclusions
References
Preparation and Compressive Properties of Advanced Pore Morphology (APM) Foam Elements
1 Introduction
2 Manufacturing Process of APM Foam Elements by Semi-constrained Method
3 Compressive Behavior of APM
4 Conclusions
References
Effect of Temperature and Strain Amplitude on Low Cycle Fatigue Behaviour of DD11
1 Introduction
2 Experimental Procedures
3 Results and Discussion
3.1 Microstructure
3.2 Fatigue Life
3.3 Cyclic Stress Response Behaviours
3.4 Fatigue Fracture Morphologies
3.5 Deformed Microstructures After LCF
4 Conclusion
References
Oxidation Mechanism of Nb-Si-Based Ultra-High Temperature Materials
1 Introduction
2 Experimental Procedures
3 Results and Discussion
3.1 Oxidation Rate
3.2 Selective Oxidation
3.3 External Oxidation
4 Summary
References
Microstructure and Mechanical Properties of Aluminum Alloy with Ultra-high Strength Prepared by Spray Forming
1 Introduction
2 Materials and Methods
3 Results and Discussion
3.1 Microstructure Evolution During Hot-Worked
3.2 Mechanical Properties
4 Summary
References
Effect of Pre-aging Technology on Microstructure and Mechanical Properties of 6111 Aluminum Alloy
1 Introduction
2 Experimental Procedure
3 Results and Discussions
3.1 Tensile Results
3.2 Formability and Bake Hardening Response
3.3 DSC Analysis
3.4 TEM Observation
4 Conclusions
References
Effect of Zr Content on the Microstructure, Mechanical Properties, and Corrosion Resistance of Ti-27Nb-xZr Alloys
1 Introduction
2 Experimental Method
2.1 Preparation of Ti-27Nb-XZr Alloys
2.2 Microstructure Characterization
2.3 Mechanical Properties
2.4 Electrochemical Tests
3 Results and Discussion
3.1 Microstructure and Phase Composition
3.2 Mechanical Properties
3.3 Electrochemical Characterization
4 Conclusions
References
Preparation of NiO by Precipitation Transformation and Its Supercapacitor Performance
1 Introduction
2 Experimental Part
2.1 Raw Materials and Reagents
2.2 Preparation of NiO
2.3 Physical Characterization and Performance Testing of Samples
2.4 Preparation and Electrochemical Testing of NiO Electrode
3 Results and Discussions
3.1 Instrument Characterization and Analysis of Electrode Materials
3.2 Electrochemical Performance Test Results and Discussion
4 Conclusion
References
Study on Fabrication and Compressive Properties of Mg/Al-Ordered Structure Composites
1 Introduction
2 Experimental Procedures
3 Results and Discussion
3.1 Optimization of Infiltration Parameters
3.2 Compressive Properties
4 Conclusions
References
Study on Heat Treatment Process of Tungsten-Plated Diamond
1 Introduction
2 Experimental Content and Method
2.1 Experimental Materials and Instruments
2.2 Experimental Procedure
3 Results and Discussion
3.1 Coating Morphology and Heat Treatment Process
3.2 Effect of Holding Time on Tungsten-Plated Diamond Phase
3.3 Effect of Holding Temperature on the Phase of Tungsten-Plated Diamond
3.4 Effect of Temperature Rising Rate on Tungsten-Plated Diamond Phase
4 Conclusion
References
Effect of Sc Modification and Pulping Process on Semi-Solid Structure of A356 Aluminum Alloy
1 Introduction
2 Results and Discussion
2.1 Pulp Experiment Process
2.2 Effect of Shear Rate on Semi-Solid Tissue
2.3 Effect of Initial Stirring Temperature on Semi-Solid Microstructure
2.4 Effect of Temperature Drop on Semi-Solid Microstructure
2.5 Effect of Sc Element on Semi-Solid Tissue
3 Conclusion
References
Densification Behavior of High-Volume-Fraction (B4C + W)-Reinforced Aluminum Matrix Composites Prepared by Hot Pressing
1 Introduction
2 Experimental Procedures
2.1 Powder Mixing
2.2 Vacuum Hot Pressing
3 Results and Discussion
3.1 Relative Density of the Vacuum Hot-Pressed Samples
3.2 SEM of Vacuum Hot-Pressed Samples
3.3 XRD of Vacuum Hot-Pressed Samples
3.4 Hardness of Vacuum Hot-Pressed Samples
4 Conclusion
References
The Finite Element Simulation of Diffusion Bonding for TiAl/Ti2AlNb Annular Structural Component
1 Introduction
2 The Finite Element Simulation of Diffusion Bonding
2.1 Establishment of the FE Model
2.2 Some Necessary Parameters for FE Modeling
3 Result and Discussion
3.1 The Diffusion Bonding of TiAl/Ti2AlNb Annular Structural Component
3.2 The Influence of Structure Parameters on the Diffusion Bonding
3.3 The Optimal Structure Parameters
4 Conclusions
References
Effect of Hf Content on the Stress Rupture Properties of the Second-Generation Single-Crystal Superalloy with LAB
1 Experiment
2 Results and Discussion
2.1 Microstructure
2.2 Stress Rupture Properties
2.3 Fracture Surface
3 Conclusion
References
High-Cycle Fatigue of Mg-6Gd-3Y-0.5Zr Cast Magnesium Alloys
1 Introduction
2 Experiment
3 Results and Analysis
3.1 Microstructure and Tensile Properties
3.2 S-N Diagram
3.3 Fatigue Fracture Behavior
4 Conclusion
References
Superplastic Forming Properties and Instability of Magnesium Alloy Sheet
1 Introduction
2 Material and Experimental
2.1 Testing Material and Specimen
2.2 Testing Device and Method
3 Results and Discussion
3.1 Superplasticity of AZ31B Sheet
3.2 The Superplastic FLC of AZ31B Sheet
3.3 The Distribution of Strains and Straining Law
4 Conclusion
References
The Influence of Fused Mullite Mineralizer on Mechanical Properties of Ceramic Shell
1 Introduction
2 Experimental
3 Results and Discussion
3.1 Microstructure Analysis of Mullite Powder
3.2 Chemical Component Analysis of Mullite Powder
3.3 Phases of Mullite Powder
3.4 Phases of Ceramic Shell
3.5 Microstructures of Ceramic Shell
3.6 Mechanical Properties of Ceramic Shell
4 Conclusions
References
Influences of Welding Current on Joint Structure and Mechanical Property of AZ31B Magnesium Board
1 Introduction
2 Test Materials
2.1 Joint Structure
2.2 Technological Parameters
2.3 Detection Method
3 Results and Analysis
3.1 Organizational Characteristics
3.2 Influences of the Current on Joint Structure
3.3 Influences of Current on Joint Hardness
3.4 Influences of Current on Joint Tensile Performance
3.5 Fracture Analysis
4 Conclusions
References
Surface Characterization of Nickel-Base Superalloy Powder
1 Introduction
2 Experiment
3 Results and Discussion
3.1 XPS Analysis
3.2 AES Analysis
4 Conclusions
References
Microstructure and Mechanical Properties of 6005A-T5 Aluminum Alloy Welded Joints by Friction Stir Welding and Metal Inert Gas Welding
1 Introduction
2 Experimental
3 Results and Discussion
3.1 Macrostructure and Microstructure
3.2 Mechanical Properties
4 Conclusion
References
Deformation Behavior and Constitutive Model for Isothermal Compression of TC4 Alloy
1 Introduction
2 Experimental Procedure
3 Results and Discussion
3.1 Analysis of Flow Stress Behaviors
3.2 Flow Curve Modeling by Arrhenius Equation
4 Conclusions
References
Recent Development of Hot-Pressed-/Deformed Nd-Fe-B Permanent Magnets
1 Introduction
2 Research Status of Nd-Fe-B Magnets with Thermal Deformation
2.1 Effect of Chemical Elements on Properties
2.2 Effect of Process Parameters on Magnet Performance
2.3 The Grain Boundary Diffusion Technology
3 Summary
References
Fabrication of Multiphase Particles and Grain Refinement of Al-Containing Magnesium
1 Introduction
2 Experimental
2.1 Al-Ti-C-Y Alloy Preparing
2.2 Grain Refinement Experiments
3 Results and Discussion
3.1 Synthesis of Al-Ti-C-Y Alloy
3.2 Grain Refinement Test of Al-Ti-C-Y Alloy
4 Conclusions
References
Investigation on the Microstructure of Mg-Gd-Zn Alloy
1 Introduction
2 Experimental
3 Results and Discussion
4 Conclusions
References
The Evaluation Technology of Superalloy Cleanliness
1 Introduction
2 Method for Evaluating Cleanliness of Superalloy
2.1 Metallographic Image Analysis Method
2.2 Slag Test Method
2.3 Electrolytic Extraction Method
3 Electron Beam Button Method
4 Conclusions
References
Effect of Microstructures on the Anisotropy of the Roll Casting Strip of Cold Rolled 3003 Aluminum Alloy
1 Introduction
2 Experimental Procedure
3 Results and Discussion
3.1 Mechanical Anisotropy
3.2 Microstructure of the Strip
3.3 Effect of the Textures
3.4 Effect of the Grain Boundary
3.5 Effect of the Second Phase
4 Conclusions
References
Modeling of Constitutive Equation and Microstructure Evolution of New Wrought Superalloy GH4066
1 Introduction
2 Flow Stress Test and Constitutive Equation
2.1 Flow Stress Test and the Constitutive Modeling
2.2 Metal Flow Characteristics and Deformation Eigenvalue
2.3 Determination of the Eigenvalues
2.4 Modeling of the Peak Strain and Critical Strain
3 Dynamic Recrystallization Kinetics Equation
4 Modeling of the Dynamic Recrystallization Grain Size
5 Conclusions
References
Effect of the Addition of Nanosized Y2O3 on the Mechanical Properties of WC-Bronze Composites
1 Introduction
2 Experimental Procedures
2.1 Sample Preparing
2.2 Characterization
3 Results
4 Discussion
5 Conclusions
References
High Temperature Ductility and Industrial Control Technology of Ni-Base Superalloy GH90
1 Introduction
2 Experimental Materials and Method
2.1 Experimental Materials
2.2 Experimental Method
3 Results and Discussion
3.1 The Effect of Main Elements on Equilibrium Phase Diagrams
3.2 Hot Processing Safe Area
3.3 Industrial Forging and Rolling Technology
4 Summary
References
Effects of Mg/Si Ratio on the Microstructure of Aging Al-Mg-Si Alloys Containing Er and Zr Elements
1 Introduction
2 Experimental
3 Results and Discussion
3.1 Age Hardening Behaviors of Three Mg/Si Ratio Alloys Containing Er and Zr
3.2 Microstructure Observation of Three Mg/Si Ratio Alloys Containing Er and Zr
3.3 Tensile Properties of Three Mg/Si Ratio Alloys Containing Er and Zr
3.4 The Effect of Er and Zr Elements on the Peak-Hardness of Alloy B
3.5 The Precipitation Behavior of Er and Zr Elements of Alloy B in T6 State
4 Conclusions
References
Electrochemical Corrosion Properties of Ti46Zr20V12Cu5Be17 In Situ Metallic Glass Matrix Composites in HCl Solutions
1 Introduction
2 Experiment
3 Results and Discussion
3.1 Structure Characterization
3.2 Electrochemical Corrosion Measurements
3.3 Proposition of Possible Corrosion Mechanism
4 Conclusions
References
Effect of Solution Treatment Temperature on the Mechanical Properties and Fracture Behavior of 7N01/7050 Aluminum Alloy Multilayer Plate
1 Introduction
2 Materials and Experimental Procedure
3 Result and Discussion
4 Conclusions
References
X-ray Investigations on Microstructural Evolution of Recrystallization of Single-Crystal Alloy DD6
1 Introduction
2 Materials and Methods
3 Results and Discussion
4 Conclusions
References
Influence of Minor Grain Boundary Elements on the Solidification Behavior of a Re-containing Single-Crystal Superalloy
1 Introduction
2 Experiment Procedures
3 Results and Discussion
3.1 Microstructures of As-Cast Alloys
3.2 As-Cast Segregation
4 Conclusions
References
71 Correction to: Effect of Microstructures on the Anisotropy of the Roll Casting Strip of Cold Rolled 3003 Aluminum Alloy
Correction to: Chapter "Effect of Microstructures on the Anisotropy of the Roll Casting Strip of Cold Rolled 3003 Aluminum Alloy" in: Y. Han (ed.), Physics and Engineering of Metallic Materials, Springer Proceedings in Physics 217, https://doi.org/10.1007/978-981-13-5944-6_62
Index

Systemvoraussetzungen

Als PDF speichern Als Link merken