Organic and Inorganic Coatings for Corrosion Prevention

Series Introduction, Preface, Part 1 - Organic Coatings, 1. Laboratory Corrosion Monitoring of Zinc-Rich Paint Coatings on Naval Steel in Seawater by Electrochemical Methods, 2. Factors Affecting the Electrochemical Behaviour of Zinc-Rich Epoxy Paints, 3. Sorption Characteristics of Cathodically Deposited Epoxy Films, 4. EIS - Studies of Commercially Available Coatings on Steel, 5. Natural and Chlorosulfonated Polyethylene Rubber Coatings for Anticorrosion Protection in Reducing and Oxidising Chemicals, and in Natural and Industrial Conditions, 6. Study of Electrolyte Penetration in Thin Paint Films, 7. Electrochemical Noise Measurement in the Study of Surface Coatings, 8. Comparison of the Results of Different Adhesion Tests Carried Out on Hot-Dip Galvanised Steel, 9. Characterisation of Pretreatment Processes Applied to Aluminium Alloys to be Coated with Organic Layers, 10. Soluble Ion Contamination on Steel Surfaces and its Effect on the Stability of Coatings, Part 2 - Zinc Coatings, 11. Corrosion Resistance of Zinc Alloy Coatings, 12. Corrosion Protection of Sintered Metal Parts by Zinc Coatings, 13. Electrocrystallisation of Zinc from Ammonium Chloride Solution in the Presence of an Additive, 14. Effects of the Microstructure of Zinc on the Corrosion Behaviour of Galvanised Steel in 3.5% Sodium Chloride, 15. Structural Characterisation of Silica Coatings Applied on Polished Ferrous Substrates and Derived from Hydrolysis and Condensation of Ethylsilicates, Part 3 - Other Metallic Coatings, 16. A Review on Laser Surface Modification for Enhanced Corrosion Resistance, 17. Protection of Steel Structures in Marine Applications Against Corrosion Using Aluminium Spray Coatings, 18. Structure and Corrosion Behaviour of Electroless Ni Coatings Deposited from Differently Stabilised Baths, 19. Interaction of Tin Plate Cans with Packaged Food Products, 20. Effect of the Microstructure of Aluminised Steel on its Corrosion Resistance in 3.5% NaCl Solution, 21. Contribution to the Study of the Mechanism of Corrosion of Nanocrystalline Nickel Coatings Obtained by Ball Milling, Part 4 - Ceramic Coatings, 22. Rates and Mechanisms of Combined Erosion and Corrosion of Ceramic-Metallic Coatings/Surfaces, 23. Electrochemical Behaviour of (Ti,Cr) N Coatings Obtained by Reactive Sputtering, 24. Formation of Al2O3-ZrO2 Double Oxide Thin Films and Evaluation of their Corrosion Resistance, 25. New Surface Layer Systems for the Improvement of the Corrosion Resistance of Implants, 26. Characterisation and Behaviour of Various Ceramic Coatings in Seawater. Influence of the Surface Preparation on the Adhesion and Corrosion Control, 27. Cementitious Coatings: An Approach to Environmentally Friendly Corrosion Protection?, Eist of Abbreviations, Index