This volume contains selected and peer-viewed papers presented at the 21st Chinese Materials Conference 2020(CMC2020) held online in Beijing, China, Nov. 17-22. 2020. The Chinese Materials Conference (CMC) is the most important serial conference of the Chinese Materials Research Society (C-MRS) and is held each year since the early 1990s. Chinese Materials Conference 2020 had 42 Symposia covering four fields of energy and environmental materials, advanced functional materials, high-performance structural materials, and design, preparation, and characterization of materials. This book will be useful and interesting for many engineers and researchers engaged in materials areas.
This volume contains selected and peer-viewed papers presented at the 21st Chinese Materials Conference 2020(CMC2020) held online in Beijing, China, Nov. 17-22. 2020. The Chinese Materials Conference (CMC) is the most important serial conference of the Chinese Materials Research Society (C-MRS) and is held each year since the early 1990s. Chinese Materials Conference 2020 had 42 Symposia covering four fields of energy and environmental materials, advanced functional materials, high-performance structural materials, and design, preparation, and characterization of materials. This book will be useful and interesting for many engineers and researchers engaged in materials areas.
Reihe
Sprache
Verlagsort
Zielgruppe
Illustrationen
Illustrations, unspecified
Dateigröße
ISBN-13
978-3-0357-3738-7 (9783035737387)
DOI
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Klassifikation
<ul><li>Preface</li><li>Chapter 1: Properties and Processing Technologies of Structural Alloys</li><li>Main Alloying Influence on Second Phase Dissolution during Solution Treatment of Al-Zn-Mg-Cu Alloys</li><li>Microstructure Evolution and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy Deformed by Multi-Directional Forging with Decreasing Temperature</li><li>Improved Recrystallization Resistance and Welding Properties of Cold-Rolled Al-Mg Alloy Sheets by Microalloying with Sc and Zr</li><li>Effect of Pulse Current on Mechanical Behavior of High Temperature Titanium Alloy Ti55</li><li>Thermal Deformation Behavior of a New Metastable Beta Titanium Alloy</li><li>Penetration Damaging Behavior of ATI425 Titanium Alloy</li><li>Dendritic Growth of Rapid-Solidified Eutectic High-Entropy Alloy</li><li>Microstructure and Properties of Laser-Selected Melt-Formed AlSi10Mg Alloy</li><li>Experimental Study on Welding Process of TC4 Titanium Alloy with Different Welding Wires</li><li>Microstructure and Texture Evolution of Repetitive Upsetting-Extruded (RUEed) Mg-Gd-Y-Zn-Zr Alloy after Hot Compression</li><li>Morphology of Dispersoids in an Annealed Al-Mg Alloys</li><li>Effect of Boronizing Treatment on the Conductivity of a High-Conductivity and Heat-Resisting Al-Zr Alloy Conductor Material</li><li>Influences of Solution Temperatures on Microstructure and Mechanical Properties of near ? Titanium Alloy</li><li>Isothermal Oxidation Behavior of FGH720Li Superalloy at Service Temperatures</li><li>Effect of <i>In Situ</i> TiB<sub>2</sub> Particles on the Grain Size and Mechanical Properties of 7075 Aluminum Alloy</li><li>Microstructure Evolution and Meta-Dynamic Recrystallization Behavior of Ti-45Al-8.5Nb-0.2W-0.2B-0.3Y Alloy during Inter-Pass Annealing after Deformation</li><li>Effect of Coarse-Grained Ring on Mechanical Properties and Cutting Performance of 2011 Aluminum Alloy Extruded Bar</li><li>Effect of Zr on the Microstructure and Mechanical Properties of Al-Zn-Mg-Cu Alloy with High Zn/Mg Ratio</li><li>Flow Cessation Mechanism of ?-Phase Solidification of High-Nb Tial Alloy</li><li>Microstructure and Tensile Properties Anisotropy of 7xxx Ultra-Thick Plate</li><li>Effect of Particle Size and Shape on Flowability of FGH96 Superalloy Powder</li><li>Research on Ultimate Thinning Rate of Superalloy Spinning</li><li>Effect of Erbium on Microstructure, Hardness and Electrochemical Properties of Al-5Zn-0.03In Alloy</li><li>Effect of Precursor Design on Preparing Open-Cell Aluminum Foam Fabricated by Space-Holder Method</li><li>Effect of Cryogenic Treatment on the Microstructure and Mechanical Properties of Extruded Mg-3.5Zn-0.6Gd Alloy</li><li>Effect of Strain Amounts on Cold Compression Deformation Mechanism of Ti-55531 Alloy with Bimodal Microstructure</li><li>Hot Compression Deformation Behavior of Spray-Formed AlSn20Cu Alloy</li><li>Forming Process of Wire and Arc Additive Manufacture</li><li>Helmholtz Free Energy and the Activation Volume of Steady-State Creep in FGH96 Superalloy</li><li>Second Phase Particles and Mechanical Properties of 2618 Aluminum Alloy Ring</li><li>Preparation of Sub-Micron Bi Alloy Powers with the Ultrasonic Mixed Crushing</li><li>Effect of Internal Electromagnetic Stirrings DC Casting on Grain Refinement and Segregation of Large-Sized Billet of 2219 Alloy</li><li>Interface Reaction between Directional Solidified Superalloy DZ40M and Ceramic Mould</li><li>Microstructure of Additive Manufactured Ti6Al4V by Electron Beam Melting</li><li>Microstructure Evolution of Al-Zn-Mg-Cu Alloy with Erbium during Homogenization</li><li>Effect of Temperature on the Cyclic Stress Amplitude of ENiCrFe-1 Ni-Based Alloy Electrode and its Mechanism</li><li>Microstructure Evolution and Mechanical Properties of Mg-10.37Gd-3.66Y-2.27Zn-0.52Zr Alloy during Reciprocating Upsetting-Extrusion</li><li>Effect of Jet Grading Technology on the Properties and Structural Characteristics of Tungsten Products</li><li>Microstructure Evolution and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy during Compression</li><li>Microstructures and Mechanical Properties of MIG Welded Al-Mg-Si-xCu Alloys</li><li>Low Cycle Fatigue Properties of FGH720Li Superalloy</li><li>Interface Reaction between DD6 Single Crystal Superalloy and Ceramic Core</li><li>Microstructure Evolution of near ? Titanium Alloy during Multi-Step Thermomechanical Deformation Process</li><li>Effect of Heat Treatment on Microstructure and Mechanical Properties of AlSi10Mg Alloy Fabricated by Selective Laser Melting</li><li>Interface between FGH96 Superalloy and Refractory Slurry with Different Soaking Time</li><li>Characterization of Hot Deformation Behavior of Ti-Al-Nb-Zr-Mo-Cr Alloy</li><li>Chapter 2: Properties and Processing Technologies of Structural Steels</li><li>Microstructures and Mechanical Properties of Annealed Fe-8Mn-6Al-0.4C Duplex Low-Density Steels</li><li>Effect of Heat Treatment Process on Mechanical Properties and Microstructure of S280</li><li>Effect of the Service Temperature on the Strength Plasticity and Fracture Mechanism of Cr-Mo Casing Steel</li><li>Surface Performance of Chrome-Free Anti-Fingerprint Zinc and Zn-Al-Mg Coated Steel</li><li>Hot Deformation Behavior of 980MPa ?-TRIP Steel</li><li>Microstructure and Mechanical Properties of ER70-Ti Steel for Gas Shielded Welding Wire</li><li>Phase Transformation of ER70-Ti for Gas Shielded Wire</li><li>Phase Transformation Law of Nb Microalloyed Steel at Different Cooling Rates</li><li>Microstructure Evolution and Mechanical Properties of 67GPa*% Grade Medium Manganese Steel</li><li>Spinning Process of D406A Ultra-High Strength Steel</li><li>Microstructure and Properties of Q690D High Strength Low Alloy Steel</li><li>Microstructure and Mechanical Properties of High Strength Low Alloy Steel Q550D</li><li>Thread Galling Damage Mechanism and Prevention of a Low Alloy Steel Tubing Connection</li><li>Chapter 3: Materials for Tubular Goods and Casing Equipment</li><li>Failure Analysis of Tee in Shale Gas Transportation Platform</li><li>Integrity Analysis of Casing Premium Connection under High Compression Load</li><li>Experimental Study of Steel Reinforcement Repair Sleeve on X80 Pipe with Interlayer Defect</li><li>Fracture Failure Analysis of the Blowout Preventer Ram in an Oilfield</li><li>Mechanical Properties and Microstructure Comparative Analysis of 500MPa Hot Rolled H-Section Different Positions for Ultra-Deep well Platform</li><li>Burst Failure Analysis of a HFW Pipe for Nature Gas Pipeline</li><li>Failure Analysis for Girth Weld of Gathering Pipelines</li><li>Hydrogen Sulfide Stress Cracking in a Q345R Welded Joint</li><li>Influence of Banded Structure on the Properties of Petroleum Pipe Steel and its Rating Analysis Method</li><li>Chapter 4: Coatings, Surface Treatment and Corrosion Behavior of Structural Materials</li><li>Effect of RE Elements Addition on Corrosion Behavior of Mg-Zn-Ca Amorphous Alloys for Biomedical Applications</li><li>Effect of Spray Distance on the Microstructure and High Temperature Oxidation Resistance of Plasma Spray-Physical Vapor Deposition 7YSZ Thermal Barrier Coating</li><li>Progress of Laser Cladding Wear Resistant Coating on Titanium Alloy Surface: A Review</li><li>Research Progress on Corrosion Resistance of Titanium Alloy Oil Well Tubing</li><li>Corrosion Behavior and Mechanism of Oil Casing Steel in CO<sub>2</sub> Salt Solution</li><li>Oxidation Behavior of LPPS MCrAlY Coatings at High Temperature: Part I TGO Growth and ? Phase Depletion</li><li>Abrasion Resistance and Corrosion Resistance of Chromium-Free Fingerprint-Resistant Zn and Zn-Al-Mg Coating Cold-Rolled Steel Sheets</li><li>Comparison of Corrosion Behavior of an Epoxy Coating and a RGO Modified Epoxy Coating on N80 Tubing Steel in 10.0 wt% NaCl Solution at Different Temperatures</li><li>Surface Effect in a Metastable ? Ti-Nb-Sn Alloy</li><li>Effect of Heat Treatment on the Microstructure and Mechanical Properties of a Co-Based Superalloy Strip</li><li>Reasons Analysis on Corrosion Perforation of L245 Pipeline from Interior Wall</li><li>Study on the Oxidation Behavior of LPPS MCrAlY Coatings at High Temperature: Part II Coating Microstructure Development</li><li>Dynamic Hardness of MCrAlY Abradable Seal Coating</li><li>Analysis of Laser Surface Hardening of GM246 Cast Iron</li><li>Comparative Study of Surface Contaminated Layer on Titanium Aluminum Alloy and Titanium Alloy Investment Castings</li><li>Effect of Graphene Content on the Micromorphology, Microhardness and Micro Frictional Resistance of Co-Ni-Graphene Composite Coating</li><li>Anticorrosion Property of TC27 Titanium Alloys and Application Evaluation in Tubing</li><li>Preparation and Performance Evaluation of a Novel Bactericide for Sulfate Reducing Bacteria</li><li>Effect of Ti and Sb Elements Addition on the Microstructure and Corrosion Resistance of Hot-Dip Galvanized Zn-11Al-3Mg Alloy</li><li>Failure Analysis of Cracked and Corroded Tubings in Sudong Block of Changqing Oilfield</li><li>Chapter 5: Functional and Special Materials</li><li>Transdisciplinary Application of Functional Materials in Petroleum Engineering</li><li>Experimental Investigation on the Heat Dissipation Performance of Bismuth-Based Alloy Thermal Conductive Sheet</li><li>Fabrication of Y<sub>2</sub>Ti<sub>2</sub>O<sub>7</sub> Transparent Ceramic by Spark Plasma Sintering</li><li>Process Parameters Study on Structure and Properties of Zr-Based Bulk Metallic Glasses</li><li>Preparation and Properties of Calcium Doped Carbon Nanofibers Photothermal Reagent</li><li>Effect of Reaction Time on the Coercivity of Barium Ferrite Synthesized by Hydrothermal Process</li><li>Diffusion Bonding Performance of Copper Target for 300mm Integrated Circuit</li><li>Impact of the Co Doping on the Structure, Magnetic Properties, and Phase Transition in Ni<sub>50-x</sub>Co<sub>x</sub>Mn<sub>38</sub>Sn<sub>12</sub> Ribbons</li><li>Progress of Microstructure and Texture of High Purity Tantalum Sputtering Target</li><li>Phase Field Simulation on the Surface Morphology of Cu/Ti Nano Thin Film</li><li>Design of Transmission Polarization Metasurface Converter</li><li>Research on Vortex Electromagnetic Wave Based on Coding Metasurface</li><li>Effect of the Binder on Properties of Molten Core and Co-Debinding Behavior in Silica-Based Ceramics</li><li>Weld Joint of Tantalum Sheet by Tungsten Inert Gas Welding</li><li>Molten Salt Synthesis of Multiple Manganese Oxides/Graphene Composites in Facile and Large Scale with Enhanced Supercapacitor Performance</li><li>Effect of Mo<sub>2</sub>C Addition on the Microstructure and Properties of TiC-High Manganese Steel-Bonded Carbide</li><li>Effect of Raw Material Purity on Structure and Properties of Metallic Glasses</li><li>High Pressure Sintering of Silicon Carbide with Mg-Cr<sub>3</sub>C<sub>2</sub> Composite Additive</li><li>Effect of Annealing Temperature on the Soft Magnetic Properties of Fe<sub>70.43</sub>Nb<sub>10.77</sub>Si<sub>15.77</sub>Cu<sub>2.34</sub>B<sub>0.69</sub> Amorphous Aanostrips at 20K, 300K</li><li>Research on Micro-Size Electrical Discharge Grinding Polycrystalline Cubic Boron Nitride Based on Single Pulse</li><li>Chapter 6: Computational Procedures in Materials Science</li><li>FEM Simulation on Diffusion Bonding of High Purity Tungsten Target</li><li>A Mesoscopic Modelling Framework of Microstructure Evolution and its Application on Thermo-Mechanical Processes</li><li>Deformation Law of Cold Drawing Process of High Strength Bridge Cable Steel</li><li>Optimization of Magnesium Alloy Casting Process: An Integrated Computational Materials Engineering (ICME) Approach</li><li>Experiment and Simulation Analysis of the Pressure Carrying Capacity of X80 Pipe with Metal Loss Defect on the Girth Weld</li><li>Prediction of Grain Formation and Defects during Solidification in Single Crystal Superalloy Castings</li><li>Effect of Restored Energy Items in Recrystallization Simulation of AZ31 Magnesium Alloy</li><li>Simulation and Experimental Study of the Preheating Mould Temperature Distribution in Semi-Solid Diecasting</li><li>Chapter 7: Polymers and Composites</li><li>Microfluidic Fabrication of Helical Ca-Alginate Hydrogel Fibers</li><li>Gr/Cu Composites: Microstructure and Properties</li><li>Effects of Melt Ultrasonic Treatment and Forming Processes on Thermo- Physical Properties of SiC<sub>p</sub>/Mg and (SiC<sub>p</sub>+Mg<sub>2</sub>Si)/Mg Composites</li><li>Mechanical and Electrical Properties of Elastic-Porous Composite with Cu-Steel Bimetallic Wire Mesh</li><li>Long-Term Duration of Composite Repair Systems for Pipeline Defects</li><li>Quasi-State Compressive Properties of Functionally Graded Aluminum Matrix Syntactic Foams</li><li>Microstructure and Mechanical Properties of TiB<sub>2</sub>/Al-Si Composites Fabricated by Electron Beam Rapid Manufacture</li><li>Research on Microstructure and Properties of TiB<sub>2</sub>/Al-Si Multi-Element Piston Alloy Composite</li><li>Preparation and Thermal Properties of BN and LPSO Hybrid Reinforced Magnesium Matrix Composite</li><li>Research Progress on Preparation of SiC/Al for Electronic Packaging by Liquid Infiltration</li><li>Effect of Different Molecular Weight of PEG on the Crystallization Behaviors of Binary Polymer Blends PLA/TPS</li><li>Improvement of Mechanical Properties of Cu/Graphene Composite by <i>In Site</i> Reduction and Matrix Alloying with Titanium</li><li>Chapter 8: Materials and Green Technologies in Construction</li><li>Research Progress on Low-Carbon Technologies and Assessment Methods in Cement Industry</li><li>Effect of Non-Sulfur Stabilizer on Performance of SBS Modified Bitumen</li><li>Effect of Heat Aging on Properties and Structure of SBS Modified Bitumen Waterproof Membrane</li><li>Effect of Chemical Corrosion on Properties of SBS Modified Bitumen for Waterproofing Membranes</li><li>Preparation and Properties of Formic Acid Intercalated Mg-Al Layered Double Hydroxides Deicing Additive</li><li>Research Progress of Slag Structure and Hydration Activity</li><li>Environmental Analysis for Co-Processing of Municipal Solid Waste Incineration Fly Ash in Cement Kiln</li><li>Screening of Energy-Saving Technologies for Cement Production Based on Boston Consulting Group Matrix</li><li>Emission Characteristics of VOCs during Asphalt Pavement Construction</li><li>Energy Saving Preparation and Evaluation of a Novel Polycarboxylate Superplasticizer</li><li>Chapter 9: Materials, Technologies and Assessment Methods in Environmental Engineering and Waste Recycling</li><li>0D Zn-ZIF/2D Co-ZIF Derived 0D ZnO/2D Co<sub>3</sub>O<sub>4</sub> Heterostructures for ppb-Level Acetone Detection</li><li>Preparation of Magnetic Alginate-Based Biogel Composite Cross-Linked by Calcium Ions and its Super Efficient Adsorption for Direct Dyes</li><li>Water Footprint Evaluation of Steel Production in China</li><li>Kinetics of Copper Ion Leaching from Cement-Solidified Body of Blast Furnace Slag Adsorbing Copper Ion</li><li>Ag<sub>2</sub>O/ZnO Heterostructures with Enhanced Photocatalytic Activity</li><li>Life Cycle Assessment of the NdFeB Recycling Process Route for Oil Sludge Waste Treatment</li><li>Environmental Impact Analysis of Automobile Laminated Glass Production</li><li>Assessing Water Footprint of Copper Production by Pyrometallurgy</li><li>Preparation of Pd/PPy/Foam-Ni Electrode and its Electrocatalytic Hydrodechlorination of Dichlorophenols</li><li>Effect of Trivalent Metal Cations on the Properties of LDHs Supercapacitors Prepared from Electroplating Sludge</li><li>NO Reduction Using Coal and Active Carbon with and without Catalysts</li><li>Water Footprint Evaluation of the Production of Float Flat Glass</li></ul>
