The 7th edition of the International Conference on Powder Metallurgy and Additive Manufacturing of Titanium, PMTi2024, is taking place for the first time in Spain after a successful series of previous conferences held in Australia, New Zealand, Germany, China, the United States and Canada. The aim of the conference is to gather researchers and professionals on the processing, design and application of titanium and its alloys fabricated by powder metallurgy (PM) and additive manufacturing (AM) technologies. For three days, attendants will have the opportunity to discuss topics from powder production and characterisation to applications through different processing routes. Besides Ti alloys, titanium aluminides and Ti-based metal matrix composites are also considered, as well as recycling and sustainability.
Sprache
Verlagsort
Zielgruppe
Illustrationen
Dateigröße
ISBN-13
978-3-0364-1466-9 (9783036414669)
DOI
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Klassifikation
Preface
Opening Session Keynote
A Pathway to Achieving High-Performance and Low-Cost Ti Simultaneously
Session 1: Powder Metallurgy Consolidation
Characterization of the Microstructure, Tensile, Fatigue, and Creep Behavior of Powder Metallurgy Processed Rolled and Extruded Ti-6Al-4V-1B Alloys
Optimization of a Harmonic Structured Ti-24Nb-4Zr-8Sn Alloy through Combined Microstructural and Mechanical Investigations
Enhancing Wear Resistance of Titanium Alloys: Insights from Tribological Testing
Improvement of the Mechanical Properties of a P/M Ti-6Al-4V Alloy with Additions of Carbon and Silicon
Sintered Titanium Sponge
Correlations between Microstructures and Tensile Properties of Ti- 6Al- 2Sn- 4Zr- 2Mo- 0.1Si- (0,0.5)Y (Wt.%) Alloys Fabricated by Thermomechanical Powder Consolidation
Session 2: Titanium Aluminide
An Overview on Sintering of Titanium-Aluminides
TiAl Powder Based Fused Granular Fabrication
Development of TiAl Alloys for Gas Turbine Engines
Sintering Titanium Aluminides with Co Addition
Session 2 - Posters
The Effect of Container on the Microstructure and Properties of Powder Metallurgy TiAl Alloys
Preparation and Properties of Ti-47Al-2Cr-2Nb-0.15B Alloy by Powder Metallurgy Route
Powder Densification Process Analysis of ?-Tial Alloys through Hot Isostatic Pressing
Microstructure and Mechanical Properties of Ti-43Al-9V-Y Alloy Prepared by Hot Isostatic Pressing
Mechanical Alloying Process of Ti-Al Powders through Milling and Additive Manufacturing
Characterization and Thermal Treatment of ?-TiAl Intermetallic Alloy for Enhanced Microstructural Properties
Session 3: Additive Manufacturing Deposition Techniques
Large Titanium Preform Manufacture by Cold Spray
High Strength and Ductility in as-built Ti-Cu-Fe-Al Alloys Produced via Direct Energy Deposition
Cold Spray Additive Manufacturing of Ti to Reduce the Cost of PEM Electrolyzers
Manufacturing of a Ti6Al4V Aerospace Component by Metallic Wire Based Laser Beam Directed Energy Deposition
Session 3 - Posters
Optimizing Titanium-Boron Carbide Composites for Aerospace Manufacturing via Plasma Metal Deposition
Session 4: Powder-Bed Additive Manufacturing - I
In Situ Alloying of Copper-Coated Titanium Powder via Laser Powder Bed Fusion
Developing near Beta Ti-30Nb-4Sn Alloy through In Situ Alloying in Additive Manufacturing Processes
A Novel Compositional Design Strategy for As-Printed Ti Alloys with Equiaxed Microstructure and Excellent Mechanical Performance
Porous Thin Wall Titanium Alloys Manufactured by Electron Beam Selective Melting
Achieving Strong and Uniform Additively Manufactured Titanium through Alloy Design
Session 4 - Posters
Investigating Ti6Al4V Spreadability on Powder Bed Fusion: A Comparative Analysis of Single and Multi-Layer Approaches
Sandwich Structure of Ti-5553 and Ti-42Nb Prepared by Laser Powder Bed Fusion
Laser Powder Bed Fusion Manufacturing of Graded Ti-Nb Alloys: Microstructural and Mechanical Properties for Biomedical Applications
Tailored Titanium Mechanical Metamaterials via Additive Manufacturing
Investigating Multimaterial Lattices Fabricated via Laser Powder Bed Fusion Using a Reinforcement Layer Strategy
Session 5: Powder Production and Characterisation
Predicting Powder Spreadability for Metal AM
Suitability of Novel Titanium Alloys Powders for Metal Injection Moulding Applications
Effect of Surface on the Properties of Titanium Based Powders
Offsize Particle Size Utilization for Laser Powder Bed Fusion Processing of Plasma Atomized Ti-6Al-4V Powders: Impact on Fatigue Properties of Produced Parts
Session 6: Powder-Bed Additive Manufacturing - II
Strong and Ductile Titanium Alloys Containing High Interstitial Elements
A Novel Strategy to Tailor Microstructures and Mechanical Properties of Ti upon Understanding of the Powder Oxide Layer
Effect of Layer Thickness and Particle Size Distribution on the Microstructure and Properties of Ti6Al4V Processed by Laser Powder Bed Fusion
Investigation of the Effect of Oxygen Homogeneity on the Processability of Ti-6Al-4V: Addition of out of Spec Powders
Dwell Fatigue of Ti-6Al-4V Alloys Processed by Laser Powder Bed Fusion
Session 6 - Posters
Effects of Thermal Induced Porosity on High-Cycle Fatigue Behaviors of Selective Laser Melted Ti-6Al-4V Titanium Alloy
Session 7: Metal Injection Molding and Sinter-Based Additive Manufacturing
Interaction of Binder and Powder in Processing of Titanium
TiNb-Based Shape Memory Alloy Scaffolds Produced by Direct Ink Writing
Comparing Lithography-Based Metal Manufacturing for Titanium with Established Processes such as Cold Metal Fusion
Development of Materials and Processes for the Lithography-Based Metal Manufacturing of Ti6Al4V
Advances in Lithography Based Metal Manufacturing of Nickel Titanium Alloys
Session 7 - Posters
Processing of a Beta Titanium Alloy by Metal Injection Molding (MIM)
Additive Manufacturing and Hot Isostatic Pressing Formability Contrast of GH4169
Enhancing Sintering Performance of Ti-6Al-4V through Phenomenological Simulation and Predeformation
Innovative Thermal Approach for Consolidation of AM-MEX Ti64-Based Components Using Sustainable Colloidal Feedstock
Fabrication and Properties of Extrusion-Based 3D Printing of Ti-6Al-4V Alloys
Session 8: Sustainability and Recycling
Ways to Improve Carbon Footprint in the Additive Manufacturing Process Chain
Exploitation of FAST/SPS to Recycle Surplus Metal Powder for Sustainable Solutions and near Net Shape Components
On the Effectiveness of the Processing Parameters of Titanium Ti-6Al-4V by PBFL/m and the Effect of Powder Recycling on the Material Properties
3D Printing of Ti-6Al-4V Parts from Waste Material
Session 9: Titanium Matrix Composites
Progress of Titanium Matrix Composites via Powder Metallurgy and Additive Manufacturing Based on the Newly Developed Nano-TiBw Reinforced Titanium Matrix Composites Powder
Refined Microstructures and Enhanced Strength of In Situ TiBw/Ti-6.5Al-2.5Zr-1Mo-1V Composites by Selective Laser Melting
Improving Strengthen-Ductility Synergy of Titanium Matrix Composites by Constructing Multi-Scale Network Heterostructure
Microstructure and High-Temperature Performance of Laser Powder Bed Fusion Yttrium Silicide-Modified near ? Titanium Alloy
Study of Wear Behavior of Ti6Al4V/SiCp Composites Additively Manufactured by Laser-Directed Energy Deposition
Recent Developments in Producing Highly Dense Ti Matrix Composites via Hydrogen Assisted Powder Metallurgy
Session 9 - Posters
Ti-35Nb-TiC Metal Matrix Composites
Microstructure Design and Mechanical Behaviors of Dual-Scale TiB Whisker Reinforced Ti64 Composites
Synthesis Mechanism and Mechanical Properties of Pelleted Hetero-Structure Titanium Matrix Composites via Interdiffusion and Self-Organization Strategy Based on Powder Metallurgy
Session 10: Microstructural Development
Porosity Prediction and Defect Control for the Titanium-Based Metal Additive Manufacturing Processes
Martensite Decomposition during Heating of the Ti-6Al-4V Alloy Manufactured by Laser Powder Bed Fusion
High-Temperature "Inverse" Hall-Petch Relationship and Fracture Behavior of TA15 Alloy
Exploring Layered Materials Using Laser Powder Bed Fusion of Titanium Alloys
Session 10 - Posters
Evolution of Microstructure and Mechanical Properties of Powder Metallurgy TC18 Prepared by Hot Isostatic Pressing
Mechanical Behaviour and Structural Investigation of Ti-Pt-Ru High Temperature Shape Memory Alloys
Session 11: Applications of Powder Metallurgy and Additive Manufacturing Titanium Alloys
Ti and Co-Cr-Mo Alloy Dissimilar Joint Obtained by Additive Manufacturing
Infiltration with Polymeric Biocomposite of Porous Ti6Al4V Implants Obtained through Laser Sintering to Enhance Osteointegration and Antimicrobial Activity
Comparison between TiN Coating on Porous Ti-6Al-4V Produced by EBM or PM for Bipolar Plates in PEM Fuel Cells
Powder Metallurgy Technologies for Low-Cost Titanium-Based Laminated Armor
Session 11 - Posters
Obtention of Functionally Graded Ti-13Nb-(10-X)Zr-XFe Biomedical Alloy through Additive Manufacturing
Assessment of Microstructural Homogeneity and Composition Gradients in SLM-Manufactured Ti-30Nb-4Sn Alloy for Biomedical Applications
Fabrication of Porous Titanium Scaffolds with Enhanced Biofunctional Behavior by Combining Stereolithography Technique and Infiltration of Composite Biopolymers with Osteoinductive and Bactericidal Properties
PMEMEL-H2: Opportunities for the Development and Application of Powder Metallurgy in Enhanced Performance Ion Exchange Electrolysers for Green H2
