Nano Engineering and Materials Technologies IV

<ul><li>Preface</li><li>Chapter 1: Properties and Processing Technologies of Structural Materials</li><li>Rapid Dissolution of Secondary Phase in Cold-Rolling Al-Cu-Mg Alloy by Electropulsing Treatment</li><li>Self-Healing Microbial Concrete - A Review</li><li>Control and Mechanism Analysis of Serrated Chip Formation in High Speed Machining of Aluminum Alloy 7050-T7451</li><li>Utilization of Local Waste Materials in High-Performance and Self-Compacting Concrete</li><li>Study on the Influence of Anisotropy on Cutting Performance of Aviation Aluminium Alloy 7050-T7451</li><li>Static Softening Behavior of Low Carbon High Niobium Microalloyed Steel</li><li>Experimental Study on Friction Characteristics of Micro-Arc Oxidation Modified Layer on Titanium Alloy Surface</li><li>Mechanical Behavior of Mode I Fractured Concrete Repaired by Polymethyl Methacrylate (PMMA)</li><li>Modification and Scale-Up Process of Citrogypsum to ?-Calcium Sulfate Hemihydrate over Sodium Chloride Solution</li><li>Research on Additive Manufacturing Technology in the Field of Mold Repair</li><li>Review and Prospect of the Influence of Laser Cladding Process Parameters on the Properties of Die Cladding Layer</li><li>Study on the Friction Characteristics of Plasma Spray Modified Layer on Titanium Alloy in Artificial Sea Water Environment</li><li>Chapter 2: Materials for Biomedical Application</li><li>Porous Bioceramic Made from Cow Bone Powder Mixed Calcium Phosphate Glass: Clinical Trial</li><li>Preparation of Crude Turmeric Extract Loaded Poly(Acrylamide-<i>co</i>-Acrylic Acid) Microspheres for Drug Release System</li><li>Preparation and Characterization of a New Absorbent Pad from Rice Starch</li><li>Clinical Trial of a Novel Starch-Based Adhesive Bandages for Medical Dressing</li><li>Influence of Sieving Polymer Concentration and Applied Voltage on Separation Accuracy of the Capillary Gel Electrophoresis for Small DNA Fragments</li><li>The Thermal Properties of Polyurethane/Neoprene Blends on Prosthetic Foot</li><li>Encapsulation of Turmeric Crude Extracted in Chitosan Hydrogel Beads for Antimicrobial in Animal Health Care Applications</li><li>Mixed Langmuir Monolayers of C18 Fatty Acids: Effect of Degree of Saturation</li><li>Chapter 3: Technologies of Chemical Production</li><li>Calculation of Activation Energy of Commercial Grade H₂O₂from DSC for Using Evaluation Thermal Hazard</li><li>Influence of Different Preparation Methods of Silver-Modified Carbon Nitride on the Photocatalytic Activity towards Indigo Carmine Dye</li><li>To the Question of Efficiency of Different Methods of Dispersion of Nanosecuring Suspensions</li><li>Synthesis of Zeolite X from Bentonite via Hydrothermal Method</li><li>Synthesis of Nanoporous Material from Lignin via Carbonization Assisted Acid Activation</li><li>Horse Manure Derived Nitrogen-Doped Porous Carbon via Hydrothermal Carbonization for Promising Applications</li><li>The Production of Biodiesel from Waste Cooking Oil (Simultaneous Esterification and Transesterification Using Fe/Zeolite Catalysts from Waste Geothermal)</li><li>Effect of Poly(Acrylic Acid) Based Polymer Flocculants on Sedimentation of Surface Water</li><li>Photocatalytic Degradation of Methylene Blue Using Zinc Oxide/Styrene Butadiene Rubber Photocatalyst</li><li>Pilot Scale Continuous Adsorption of Soluble Oil Wastewater by Modified Sugarcane Bagasse with Al₂(SO₄)₃ as Adsorbent</li><li>The Effect of Different Extracting Conditions on the Antibacterial Activity of <i>Moringa oleifera</i> Lam<i>. </i>Leaves Extract for the Development of Antibacterial Meat Tray</li><li>Chapter 4: Composites and Polymers, Synthesis of Nanomaterials</li><li>A Simple Synthesis of Silver Nanoparticles on Cellulose Paper for Antimicrobial Applications</li><li>Characterizing Interfacial Thermal Conductivity in Graphene Nanocomposites</li><li>Effect of Soybean Oil in Eggshell Powder Filled Polylactic Acid Composites on its Mechanical, Thermal and Rheological Properties</li><li>Improved Thermoelectric Behavior of Super-Growth Carbon Nanotube Using Tetrathiafulvalene-Tetracyanoquinodimethane Nanoparticles</li><li>Hydrophilic/Hydrophobic Property Changes on Polyacrylonitrile/Cellulose Acetate Nanofiber Membrane</li><li>Swelling of PVA/Chitosan/TiO₂ Nanofibers Membrane in Different PH</li><li>Eco-Friendly Preparation of Nanofibrillated Cellulose from Water Hyacinth Using NaOH/Urea Pretreatment</li><li>Observation of Coating-Substrate Adhesion of Nanocomposite Hard Coating with Respect to the Deposition Parameters and Surface Finishing of Cemented Carbide Substrate</li><li>Investigation of Mechanical Properties of MWCNTs Doped Epoxy Nanocomposites in Tensile, Fracture and Impact Tests</li><li>Deformation and Fracture Mechanics of Superior Nanocomposites</li><li>Structure and Properties of Sputtered Ti-O-N Nanocomposite Films</li><li>Fabrication of Poly(Butylene Succinate) Composite Films with Silver Doped ZSM-5: Effect of Silver ZSM-5 on Antibacterial Activity and Biodegradable Behavior</li><li>The Effect of Thermal Aging on Mechanical Properties and Morphological Properties of Thermoplastic Vulcanizates Based on Natural Rubber and Polystyrene</li><li>Combining Cellulose and ZnO for Extend the Shelf Life of Fruit</li><li>Modeling of Polymeric Liquid Material Properties Effect on Pressure Transients in the Elastic Pipe</li><li>A Preliminary Study on the Effect of <i>Pandanus amaryllifolius </i>Extract as Green Stabilizer to the Growth of Nanostructured ZnO</li><li>Patterned ZnO Nanowires between Interdigitated Electrodes by Integrating Hydrothermal Approach with Photolithography Process</li><li>Chapter 5: Functional and Special Materials</li><li>Experimental Investigation the Effect of Cleaning on the Optical and Mechanical Properties of PV Module Glasses</li><li>Characterization of a Chromium (III) Ion Probe and its MOF-Supported Material</li><li>Structural and Optical Properties of Commercial Microparticle Zinc Oxide</li><li>The Detection of Cu²⁺ Ions Using Paper-Based Silver Nanoparticles as a Colorimetry Indicator</li><li>A Performance Study of CNT/TiO₂/ PVA Loaded on the Paper Filter for Benzene Treatment from Cigarette Smoke</li><li>Active Starch/PVA Composite Films Containing <i>Syzygium oleana</i> for Ammonia Vapor Colorimetric Indicators</li><li>Growth of less than 20 nm SnO Nanowire Using AAO Template for Gas Sensing</li><li>The Effect of Doping on the Structure of Zinc Oxide Obtained by Atomic Layer Deposition</li></ul>