Corrosion. Protection of Structural Metals and Alloys (2017-2018)

<ul><li>Preface</li><li>Chapter 1: Metal-Based Coatings</li><li>Corrosion Behaviors for Galvanizing, Galvalume and Chromate Treated Steels in 1% NaOH Solution</li><li>Influence of the pH and Stirring Speed of the Electrodeposition Bath in the Performance of Zinc and Zinc-Nanocomposite Coatings</li><li>The Effect of Current Densities in Zinc Electroplating Process on Mild Steel for Soil Water Environment Application</li><li>Effect of Doping of Nanoparticles on the Properties of Zn-Ni Composite Coatings</li><li>Structure and Performances of 7075 Aluminum Alloy Surface Subject to Hot-Dip Zinc</li><li>Characterization of Ni-P and Ni-P-Al₂O₃ Heat Treated Layers</li><li>Effect of Heat Treatment of AZ91 Magnesium Alloy on the Electroless Ni-P Deposition</li><li>Factors Affecting on the Corrosion Resistance of Electroless Ni-Zn-P Coated Steel</li><li>Fabrication of Superhydrophobic Ni-SiO₂ Nanocomposite Coating with Excellent Corrosion Resistance on Mild Steel</li><li>New Composite Materials Based on Intermetallics for Protection Details of Hydropower Equipment from Cavitation, Hydroabrasive and Corrosion Wear</li><li>Influence of Composite Nano-Coating of Ni-Co-SiC Obtained by Electrodeposition on the Corrosion Resistance of API 5L X80 Steel</li><li>Corrosion Behavior of As-Plated and Annealed Cr-C-Deposited Steels</li><li>Metal Matrix Composites as Environment-Friendly Protective Coatings</li><li>Electrodeposition and Corrosion Resistance of Cu/Zn/Cu Multilayer Coatings</li><li>Study on Corrosion Process of Al-Mg Coatings Based on Electrochemical Impedance Spectroscopy</li><li>Chapter 2: Inorganic Coatings and Pretreatments</li><li>Characterization and Structure Analysis of the Anodic Film Formed on AZ31 Mg Alloy in KOH Alkaline Solution with Various Additives</li><li>Surface Morphology and Phase Transitions of Anodic TiO₂ Films Induced by Hydrothermal Exposure</li><li>Effect of Surface Strengthening on Corrosion Property of Ti-6Al-4V in 3.5% NaCl</li><li>Investigation in the Influence of Surface Treatment on Mechanical and Electrochemical Corrosion Properties of Ti-6Al-4V Alloy</li><li>The Effect of Potential on Surface Characteristic and Corrosion Resistance of Commercial Pure Titanium Processed by Anodic Oxidation Treatment</li><li>Effect of Current Density on the Microstructure and Corrosion Properties of MAO Coatings on Aluminum Alloy Shock Absorber</li><li>Superhydrophobic and Corrosion Protective Coating on Aluminium</li><li>Optimization of MAO Process Parameters and Effect of Subsequent Sealing Treatment on Corrosion Resistance of Aluminum Alloy</li><li>Effect of Frequency and Duty Cycle on Growth, Structure and Corrosion Resistance of Micro Arc Oxidation Coating on RZ5 Magnesium Alloy</li><li>Incorporation of Composite Zirconia-Silica Nanoparticles into PEO-Coatings on Magnesium Alloys</li><li>Protective Coatings Formed by PEO and Fluorine-Containing Compound</li><li>Efficient Micro-Arc Oxidation Technology for As-Cast AZ80 Magnesium Alloy</li><li>Graphene Oxide Coatings Deposited on Steel Substrate Using Electrophoretic Deposition and Electrochemical Evaluation of Coatings in Saline Media</li><li>Effects of Al₂O₃ Additive on Manganese Phosphate Conversion Coating of Carbon Steel</li><li>Permanganate - Based Hybrid Nano-Conversion Coating on Aluminium</li><li>Study of Microstructure and Corrosion Resistance of Zinc Electrodeposits before and after Black Chromating</li><li>Ceria Coatings Prepared by Sol-Gel Approach on AZ91 Magnesium Alloy</li><li>Enhanced Corrosion Resistance of SiC_p/ 2009 Al by Cerium and Lanthanum Conversion Treatment</li><li>Entrapment of Hard Particles into Cr(VI)-Free Conversion Layers of Electrodeposited Zinc Coatings to Improve Corrosion Resistance</li><li>Effect of the Bluing Solution on Corrosion Resistance of the Oxide Film Prepared in Steel</li><li>Metallic-Ceramic Combination of HVOF Deposited Layers for Corrosion Protection Applications</li><li>Morphology, Structure and Corrosion Resistance of Nano-Enamel Coating Changed on Ti-6Al-4V Alloy</li><li>Electrochemical Behaviour of TiCN and TiAlN Gradient Coatings Prepared by Lateral Rotating Cathode Arc PVD Technology</li><li>Effect of CH₄ Content on the Characteristics of Surface Layers of Low Temperature Plasma Nitrided 2205 Duplex Stainless Steel</li><li>Effect of Gas Content and Treatment Temperature on the Characteristic of Surface Layers of Low Temperature Plasma Nitrided 316L Austenitic Stainless Steel</li><li>Stress Gradient Determination in Anti-Corrosion Multilayer Coating</li><li>Improvement of the Surface Properties of Low Temperature Plasma Nitrocarburized Martensitic Precipitation-Hardening Stainless Steel by Aging Treatment</li><li>Chapter 3: Organic Coatings and Surface Treatments</li><li>Effect of Osmotic Pressure by Salt Concentration on Corrosion Resistance of Anti-Corrosive Paint</li><li>Deterioration Behaviors of Overlapping Layers between Al-5Mg Alloy Thermal Spray Coating and Heavy-Duty Paint Coating</li><li>Metallographic Analysis of Filiform Corrosion</li><li>A Comparative Study on the Wear and Corrosion Resistance of Coatings</li><li>ZnO Nanoparticles for Anti-Corrosion Nanocoating of Carbon Steel</li><li>Corrosion, Wettability, and Adhesion of Acrylic Coatings Containing Silane-Treated Mineral Fillers on Carbon Steel</li><li>Influence of GPTMS Precursor Concentration as Pretreatment of Galvanized Steel</li><li>Bio-Inspired <i>In Situ </i>Fabrication of 11-Mercaptoundecanoic Acid Coating on Stainless Steel 304 for Corrosion Protection</li><li>Behavior of Polypyrrole Film Chemically Polymerized with Lauric Acid on Copper Surface</li><li>Preparation and Characterization of an Emulsion Paint Based on Arghel Extract as an Eco-Friendly Corrosion Inhibitor</li><li>Optimization of Corrosive Properties of Carbon Fiber Reinforced Aluminum Laminates due to Integration of an Elastomer Interlayer</li><li>Chapter 4: Coatings for High Temperatures</li><li>Corrosion Behaviour of HVOF Sprayed Coatings on ASME SA213 T22 Boiler Steel in an Actual Boiler Environment</li><li>Mechanical Properties of HVOF Sprayed CrC-NiCr Coating Exposed to Hot Corrosion Environment</li><li>Degradation of HVOF Sprayed Hastelloy C-276 Local Mechanical Properties after Exposure to High Temperature Corrosion</li><li>High-Temperature Corrosion of Aluminized Diffusion-Coating for Fe-Base Alloy in N₂/H₂O/H₂S-Mixed Gas</li><li>Improving the Corrosion Resistance of Hot-Working Mold Steel against Al Alloy Melt by Coating</li><li>Stress Evolution and Element Diffusion in Bi-Layered Yb₂SiO₅/ Mullite Environmental Barrier Coatings under High-Temperature Molten Salt Corrosion</li><li>Chapter 5: Corrosion Inhibitors</li><li>Adsorption Isotherm and SEM Investigating of Cucurbit[n]Urils Based Corrosion Inhibitors with Gossypol for Mild Steel in Alkaline Media Containing Chloride Ions</li><li>Polarization Resistance Parameters of Anti-Corrosion Inhibitor of Cucurbit[N]Urils and Thioglycolurils in Aggressive Mediums</li><li>Corrosion Inhibition on Mild Steel Using PFOA Additives</li><li>
<i>Rhizophora</i>
<i>apic</i>
<i>ulata</i> Extract as Corrosion Inhibitor in 3.5% NaCl for API 5L Steel</li><li>Some Anionic Surfactants as Corrosion Inhibitors for Carbon Steel in Hydrochloric Acid Solution</li><li>Corrosion Inhibition by a Caesalpinia Sappan L Modified Imidazoline for Carbon Steel API 5L Grade X60 in HCl 1M Environment</li><li>Neem Leaf Extract as a Corrosion Inhibitor on Mild Steel in Acidic Solution</li><li>Revealing the Inhibition Efficiencies of Artesunate and Rutin for Corrosion of Steel: A Theoretical Study</li><li>Understanding the Inhibition Mechanism of a Supramolecular Complex as the Corrosion Inhibitor for Mild Steel in the Condensate Water</li><li>Novel Methodology for the Selection, Dosing and On-Line Control of Corrosion Inhibitors for Industrial Acid Pickling</li><li>Modern Packaging Materials for Steel Products</li><li>Accelerated Tests of Protective Properties of Packaging Materials for Cold-Rolled Steel</li><li>Ceftriaxone as Corrosion Inhibitor for Nickel in Acid Solutions</li><li>Corrosion Inhibition of 6063 Aluminum Alloy in 0.5 M Sodium Hydroxide Medium by Aqueous Extract of Seeds of <i>Garcinia</i><i>indica</i></li><li>Evaluation of the Inhibition Efficiency of a Green Inhibitor on Corrosion of Cu-Ni Alloys in the Marine Application</li><li>Chapter 6: Cathodic Protection</li><li>Influence of Ti on the Electrochemical Behavior of Al-Zn-In-Si Sacrificial Anodes</li><li>Corrosion Behavior of Al-Zn-In Sacrificial Anode Alloys Produced by Conventional Casting and Semi-Solid Metal Casting Processes</li><li>A Study on Galvanic Current Variation of Zn Sacrificial Anode Made by Including of Additive in Solutions with Various Conductivities</li></ul>