Bio-Based Building Materials

<ul><li>Preface</li><li>Mechanical Properties and Durability of Bamboo Fibers/Bamboo-Fiber-Mixed Spray Mortar for Slope Protection</li><li>Experimental Investigation on Mechanical and Acoustic Performance of Miscanthus - Lime Composites</li><li>An Experimental Investigation on Suitability of Using Sisal Fibers in Reinforced Concrete Composites</li><li>Analyse of the Evolution of the Hygrothermal Properties of the Hemp-Based Mortar within the Framework of the Total Weathering Protocol</li><li>Thermal Insulation Blocks Made of Sunflower Pith Particles and Polysaccharide-Based Binders: Influence of Binder Type and Content on Their Characteristics</li><li>Effects of 0-30% Wood Ashes as a Substitute of Cement on the Strength of Concretes</li><li>Influence of High Temperatures on the Mechanical Properties of Wood Bio-Concretes</li><li>Environmental Performance of Wood Bioconcretes with Different Wood Shavings Treatments</li><li>Comprehensive Characterization of Agricultural By-Products for Bio-Aggregate Based Concrete</li><li>Experimental Study on Restoration of Deteriorated Timber due to Termites by Resin Filling</li><li>Natural Fibers vs. Synthetic Fibers Reinforcement: Effect on Resistance of Mortars to Impact Loads</li><li>Effect of Natural and Polypropylene Fibers on early Age Cracking of Mortars</li><li>Mechanical Properties of Rammed Earth Stabilized with Local Waste and Recycled Materials</li><li>Life Cycle Assessment of Circular Bio-Based Construction</li><li>Water Sensitivity of Hemp-Foam Concrete</li><li>Seashells and Oyster Shells: Biobased Fine Aggregates in Concrete Mixtures</li><li>Experimental Analysis of the Behavior of Straw Biocomposite Exposed to High Temperature</li><li>Experimental Investigation of the Compatibility of Lime Coating with Insulation Straw Biocomposite</li><li>Assessment of the Influence of the Type of Filler Materials on the Properties of Cement Grouts</li><li>Comparative Study of Metakaolin and Zeolite Tuff Influence on Properties of High-Strength Concrete</li><li>Thermal and Moisture Buffering Properties of Novel Hemp-Lime Composites Integrated with Microencapsulated Phase Change Materials</li><li>Experimental and Numerical Study of Hygrothermal Behaviour of a Washing Fines Hemp Test Wall</li><li>Evaluation of Bio-Based Earth Engineered Mortars for Low Energy and Carbon Buildings in Tropical and Subtropical Climates</li><li>Physical, Thermal and Microstructural Characterization of Earth Mortars Stabilized with Incorporating Air Additive</li><li>First Step towards the Upscaling of the Production of Washing Fines - Hemp Composite. Study of Multiphysical Properties</li><li>Mechanical Compression and Crushing Properties of a Straw-Lime Material</li><li>Erosion Behaviour of Bio-Stabilised Earthen Materials</li><li>Linseed Oil and Xanthan Gum: Promising Stabilisers for Earthen Building Materials</li><li>Bio-Stabilised Earthen Blocks: A Critical Study on Compression Tests of Immersed Samples</li><li>Evaluation of a Marine Dredged Sediment as Raw Material Compared to Volcanic Scoria for the Development of Lime-Pozzolan Eco-Binders</li><li>Earth-Based Mortars: Mix Design, Mechanical Characterization and Environmental Performance Assessment</li><li>How can a Climate-Neutral Building Look Like?</li><li>How Reliable is the Thermal Conductivity of Biobased Building Insulating Materials Measured with Hot Disk Device?</li><li>An Experimental Study on Clay and Sand Mixes to Develop a Non-Linear Homogenized Model for Earth Construction Materials</li><li>Research for Substantiation to Upscale Bio-Based Materials in the Construction Industry</li><li>Effect of Mix Proportions on Fresh and Rheological Properties of Cementitious Mixture Containing Natural Fibre: Modelling Using Factorial Design</li><li>Mechanical Properties and Fracture Energy of Concrete Beams Reinforced with Basalt Fibres</li><li>Experimental Investigation on the Fracture Energy and Mechanical Behaviour of Hemp and Flax Fibre FRC Compared to Polypropylene FRC</li><li>Properties of <i>Phragmites australis</i> for Insulating Concrete Application</li><li>Self-Desiccation of a Vernacular CSA Binder</li><li>Experimental Out-of-Plane Behaviour of a Rammed Earth Sub-Assemblage Subjected to Seismic Inputs</li><li>Customising Microstructural and Mineralogical Characteristics of Hydrated Lime Using Biopolymers</li><li>Study of the Impact of Rice Straw Particle Size on the Mechanical and Thermal Properties of Straw Lime Concretes</li><li>Comparison of Numerical HMT Codes to Simulate MBV Test of Hemp-Earth Composites</li><li>Water Stabilization of Clay Bricks with Improved Tannin and Iron Mixes</li><li>Tackling Variability of Clay to Provide a Robust Binder</li><li>Microstructural Characterization of Prefabricated Hempcrete Blocks</li><li>Reflections on the Environmental Impact of 'Vegetarian' Buildings, and on the Reliability of Databases</li><li>Effect of Plant Fibres on the Variability of Cob Materials</li><li>Improved Magnesium Cement for Durable Hemp Composite Boards</li><li>Micro-Macro Modelling Approach of Vegetal Wools Thermal Conductivity</li><li>Development of GHG Emissions Curves for Bio-Concretes Specification: Case Study for Bamboo, Rice Husk, and Wood Shavings Considering the Context of Different Countries</li><li>Life Cycle Assessment of a Wall Made of Prefabricated Hempcrete Blocks</li><li>Starch Reinforcement of Raw Earth Constructions</li><li>Successful Circular Bio-Based Construction Initiatives: Five Essentials from Case Studies</li><li>Construction Field Monitoring of a COB Prototype Building</li><li>Earth Plastered Wall Heating as a Low-Emitting, Cost-Effective and Robust Energy System for Building Renovation</li><li>Substitution of Synthetic Fibers by Bio-Based Fibers in a Structural Mortar</li><li>Rheology, Mechanical Performance and Penetrability through Flax Nonwoven Fabrics of Lime Pastes</li><li>Effect of Viscosity Modifying Agent on the Performance of Hybrid Bio-Based Concrete</li><li>?-Cyclodextrin Substituted Polyoxyethylene in the Synthesize of Polycarboxylate Superplasticizers</li><li>Efficiency of Bio-Sourced Composites in Confining Recycled Aggregates Concrete</li><li>Recovery of Excavated Materials as an Alternative Solution to Earth Building Materials</li><li>Overcoming the Perceptual Gap: Worldwide Perceived Comfort Survey of Earthen Building Experts and Homeowners</li><li>Biological Stabilisers in Earthen Construction: A Mechanistic Understanding of their Response to Water-Ingress</li><li>What Makes Cow-Dung Stabilised Earthen Block Water-Resistant</li><li>Influence of the Variability of Limestone and Fly Ash on the Setting and Mechanical Properties of a Moroccan Composite Cement</li><li>Effect of Immersion/Freezing/Drying Cycles on the Hygrothermal and Mechanical Behaviour of Hemp Concrete</li><li>Interactions of Biobased Rheology Modifying Agents with Superplasticizer in Cement Paste</li><li>Contribution on the Use of Household Waste as Bio-Admixture</li><li>Traditional Gypsum Pavements with Natural Aditives</li><li>A Dual-Scale Numerical Model for the Diffusive Behaviour Prediction of Biocomposites Based on Randomly Oriented Fibres</li><li>Risk for Mould Growth on Hemp-Lime at Different Relative Humidity</li><li>Organic Brick</li><li>Plant Biomass Used for Green Concrete: A Review of Treatment Methods</li><li>Variability Assessment of the Compressive and Tensile Strength of Fibred Earthen Composites</li><li>Synthesis of the Current Knowledge Concerning the Construction of French Traditional Cob Building for Giving Recommendations</li><li>Hygrothermal Behaviour of Air Lime Coatings with Mussel Shell Sand</li><li>Evaluation of GHG Emissions from the Production of Cross-Laminated Timber (CLT): Analysis of Different Life Cycle Inventories</li><li>Physical Properties and Hygrothermal Behavior of Mycelium-Based Composites as Foam-Like Wall Insulation Material</li><li>Mycelium Composites and their Biodegradability: An Exploration on the Disintegration of Mycelium-Based Materials in Soil</li><li>Performance of Alfa Fibres in Cementitious Materials Exposed to Diverse Surface Treatments</li><li>Stabilization of Dicalcium Silicate-Zn Composite Approaching Layered Double Hydroxide Structure for Bioactive Cement Applications</li><li>Reed as a Thermal Insulation Material: Experimental Characterisation of the Physical and Thermal Properties</li><li>Investigation of Thermal, Mechanical and Acoustic Performance of Bio-Materials Based on Plaster-Gypsum and Cork</li><li>Physico-Chemical Characterization of the Electric Arc Furnace Slag (EAFS) of the Sonasid-Jorf Steelworks - Morocco</li><li>Hydro-Mechanics Coupling on Rammed Earth Material: Drying Experiment at Structural Scale</li><li>Influence of Palm Oil Fibers Length Variation on Mechanical Properties of Reinforced Crude Bricks</li><li>Impact of Biobased Surfactants on Hygrothermal Behaviour of Gypsum Foams</li><li>Flexural Behavior of Six Species of Italian Bamboo</li><li>Shear Behavior of Bamboo Reinforced Concrete Beams</li><li>Improving Performance of Thermal Modified Wood against Termites with Bicine and Tricine</li><li>3D Modelling of Hydric Transfers in Spruce Wood with Consideration of Sorption Hysteresis</li><li>Development of Animal Fibres Composites for Construction Applications</li><li>Use of Hemp Fibres in 3D Printed Concrete</li><li>Effect of the Treatments of the Surface on Mechanical Performance of Concrete Containing Chemical Admixtures</li><li>Development of Airlaid Non-Woven Panels for Building's Thermal Insulation</li><li>Valorization of Vegetal Fibers in Anti-Fissuration Screed Mortar Formulation</li><li>Fire Behavior of Raw Earth Bricks: Influence of Water Content and Cement Stabilization</li><li>Link between Acoustic and Hygrothermal Behavior of Hemp Shiv and Pith Composites</li><li>Straw Material: End-of-Life Cycle Analysis Scenario</li><li>Influence of Fibre Treatment and Matrix Modification on Mechanical Properties of Flax Fibre Reinforced Mortars after Freeze/Thaw Cycles</li><li>Mortar to Repair Rammed-Earth Walls' Surfaces: Do we still Need it?</li><li>Durability of Bamboo Bio-Concretes Exposed to Natural Aging</li><li>Flax Fibers Composite Made up by 3D Printing</li><li>Experimental Investigation on Evaporation Rate for Enhancing Evaporative Cooling of Pervious Pavement Containing Recycled Rubber</li><li>A Model for Assessment of Heat and Moisture Transfer Hollow a Hemp Concerte Wall Using Finite Element Method</li><li>Sensitivity Study on the Parameters of a Hygrothermal Transfer Model of Air, Heat and Mass Transfer</li><li>Compatibility of Plants with a Mineral Binder</li><li>Bamboo Connection Technology for Lightweight Structures</li></ul>