Material Modelling of Selective Laser Sintered Polyamid 12 for the Deviatoric Stress State.- Temperature History in Laser Powder Bed Fusion: Analyzing the Effect of Inhomogeneous Heat Removal on the Microstructural State of Ti-6Al-4V.- Influence of Antiozonants on the Evolution of Crack Depth in Natural Rubber.- Using Continuous Relaxation and Intermittent Uniaxial Tests to Calibrate a Model for Thermal Ageing of Elastomers.- Elastomeric Engine Mounts - Numerical Studies for e-Mobility Applications.- Sorption Mechanisms of Oils and Fuels in Thermoplastic Polyurethanes.- Analysis of the Diffusion Behavior of Pyrolysis Oil from used Tires in Nitrile Butadiene Rubber.- Debonding on Demand of Adhesive Joints for the Automotive Industry.- Mechanical Properties and inter-layer Bonding of thin-walled Structures in the Fused Filament Fabrication Proces.- On the Visco-Elastic Properties of PA6-COC Polymer Blends: Experimental and Modeling.- Experimental and Numerical Study on the Temperature-Dependent Tensile Properties of AlSi10Mg Fabricated By Laser-Based Powder Bed Fusion.- Characterization of Auxetic Sheet Structures: Integrating Mechanical Testing with Nondestructive Evaluation Techniques.- Recycling of Old Binding Twine from Agriculture.- Advancing Calibration Technologies: A New Approach for Environmental Monitoring System Transmitter Calibration in Regulated Industries".- Thermal Conductivity of Additive Manufactured Aluminum Alloys.- Influence of Mechanically Recycled Material on the Properties of Liquid Silicone Rubber.- Analysis of CO2 Conversion in a Plasmalysis Reactor.- Introduction to Process Optimization in Injection Molding Using Simulation-Based AI Training.- In-Mold Coating: Innovative Coating of Polymer Components within the Injection Mold.- Application of the Two-Time-Scale Approach to the Constitutive Equations of High Temperature Steel.- Additive Manufacturing with Biodegradable Materials.- A continuum Thermomechanical Approach for Modelling Rate-Dependent material behavior under consideration of damage effects.- Strain-Induced Phase Transformation: An In-situ Study.- Statistical Size Effect in Cyclic Loading of NO30-15.- Control Texture in PBF-LB Through Beam Shaping.- The influence of a Laser-Based Heat Treatment on the Distribution of Residual Stresses in Cantilevers Manufactured with PBF-LB.- Optimization of Energy Production and Storage Systems for Residential Buildings.- Optimization of Energy Production and Storage Systems for Residential Buildings.- Molding Simulation with Multipurpose CDF Software.- Creep-Fatigue deformation of the ferritic-martensitic steel P92.- Steps Towards Microstructure-Based Modeling of the Influence of Hydrogen on the Fatigue Behavior of Duplex Steels.- Temperature Dependent Interdiffusion and Interlayer Mechanical Strength in Multi-Material Fused Filament Fabrication.- A System for Evaluating the State of Health of Traction Battery Systems.- Creep Mechanics - A Long History and Current Developments.- Plasticity Theory: Yield Conditions in The Invariant Space.- Materials for Additive Manufacturing - Working by Chance And Specifically Developed Alloys.- Heat Transfer - Modelling, Simulation, Measurement.- Viscoelastic Materials: From Experimental Characterisation to Continuum Mechanical Modelling, Implementation and Simulation'.
