Material Science and Engineering Technology X

<ul><li>Preface</li><li>Chapter 1: Polymers and Composites</li><li>Long and Short Human Hair Fiber-Reinforced Polymer Composites: Mechanical Properties for Engineering Applications</li><li>Study of the Mechanical Properties of Polymer Composites Based on Polyolefins with the Addition of Rice Husk and Compatibilizer</li><li>Assessment on the Potential Application of Salago Fiber Composite as an Alternative Material in Drone Airframe</li><li>Enhancement of Mechanical Properties of Carbon Nanotube Reinforced Al Composites Fabricated by Spark Plasma Sintering Using Hot Rolling Techniques</li><li>Fabrication and Mechanical Evaluation of Pressed Wood Powder Compounds Reinforced with Alpaca Wool and Ichu</li><li>Mechanical, Thermal and Morphological Properties of Poly(Lactic Acid) and Poly(Butylene Adipate-co-Terephthalate) Blends with Organoclay</li><li>Modelling the Toughness of Nanostructured Polyhedral Oligomeric Silsesquioxane Composites Fabricated by Stereolithography 3D Printing: A Response Surface Methodology and Artificial Neural Network Approach</li><li>Property Improvement of Recycled Nylon 6 by Thermoplastic Poly(Ether-Ester) Elastomer and Wollastonite</li><li>Chapter 2: Materials Physics and Computational Materials Science</li><li>Magneto-Transport Properties and Hole Self-Doping due to Excess Oxygen Addition in Polycrystalline LaMnO₃</li><li>Thermal Conduction: Computational Model and Engineering Applications</li><li>First Principle Calculation and Thermodynamic Analysis of Coexisting Phase of Cu-Cr-Sn Copper Alloy</li><li>Machine Learning Enabled Prediction of Electromagnetic Interference Shielding Effectiveness of Poly(Vinylidene Fluoride)/Mxene Nanocomposites</li><li>Chapter 3: Functional Materials</li><li>Tailoring the Everolimus Immobilisation Time on Poly(L-Lactic Acid/ Poly(D-Lactic Acid) Scaffold for Biodegradable Stent Coating Development</li><li>Self-Healing of Epoxy-Loaded Halloysite Nanotubes/Polysulfone Nanocomposite Membrane</li><li>Poly(L-Lactide) Membrane as an Elastic Membrane to Support Cardiac Bleeding Intervention</li><li>Enhancing Thermoelectric Properties of Conductive Polymers Using Zr-Metal-Organic Frameworks Composite Materials</li><li>Characterization of the Properties of Chitosan Nanoparticles (CSNPs)/PEO Nanofibrous Membranes</li><li>Chapter 5: Materials and Technologies for Microelectronics and Energy Saving and Energy Conversion Devices</li><li>Novel Gel-Polymer Electrolytes for Sodium-Ion Secondary Batteries - An Electrochemical Impedance Spectroscopic Studies</li><li>Supercapacitive Performance of Electrochemically Synthesized Samarium Cobalt Oxide Nanosheets and Nanoflowers</li><li>Enhance Growth Temperature ZnO Nr Photoanode DSSC for Performance of Photo-Supercapacitor via Hydrothermal</li><li>Comparative Parametric Analysis of Class-B Power Amplifier Using BJT, Single-Gate MOSFET, and Double-Gate MOSFET</li><li>Investigation on the Structural and Electrical Properties of ZnO Thin Films Co-Doped with Rare Earth Gd and Al Prepared by Co-Sputtering Method</li><li>Fabrication of Aluminum Nickel Reactive Bilayer by the Lift-Off Process</li><li>Chapter 4: Materials Chemistry and Chemical Engineering</li><li>Thermally Conductive Cellulose/Coper Composite Rods for Tailoring the Characteristics of Cigarettes</li><li>Development of Catalysts for Synthesizing Methanol from Syngas</li><li>Free Fatty Acid Reduction of Palm Oil Mill Effluent (POME) Using Heterogeneous Acid Catalyst for Esterification</li><li>Synthesis and Characterisation of Iron Oxide Nanoparticles with Tunable Sizes by Hydrothermal Method</li><li>Chapter 6: Structural Metals and Alloys, Processing Technologies</li><li>Welding Parameter Optimization for Improvement of Mechanical Strength of Weld Line</li><li>Interference Phenomena on Infrared Thermography during a Mushy Solidification Zone</li><li>Hybrid Products from Laser Powder Bed Fusion Manufactured Inconel 718 and 316L Utilizing Laser Welding</li><li>Effect of Pore Defect Size and Location on Damage Tolerance of Aluminum Alloy Piston and Fiber Ring Groove</li><li>A Polynomial Equation Model for Fatigue Crack Propagation in an Aeronautical Steel Material</li><li>The Damping Effect of Particle-Filled Hollow Sphere Structures and their Application in Machine Tool Components</li><li>Importance of Finite Element Analysis for Verification of Technological Parameters of Seamless Tubes Production Obtained by Experiment</li><li>Influence of Air Gap Size to Mechanical Properties of Laser Welded Lap Joints</li><li>Study on the Preparation and Characteristics of Copper-Chromium Alloy Cladding Layer</li><li>Environmental Damage Behavior of 2A12 Aluminum Alloy under Coupling Action of Marine Atmospheric Environment and Tensile-Compressive Load</li><li>A FEM Analysis on the Influence of Manganese on Carbon and Chromium Macrosegregation in Large Size Steel Ingot</li><li>FEM Simulation of the Effect of Mold Initial Temperature on Carbon Macrosegregation in Large-Size Steel Ingots</li><li>Chapter 7: Building Materials and Structural Units</li><li>Effect of Local Coarse Aggregates on the Compressive Strength of High Strength Concrete</li><li>New-and-Old Concrete Interface Shearing Strength Test and Shear Slip Behavior Analysis</li><li>Effects of the End-Zone Reinforcements and Strand-Debonding on the Temporal Changes of Principal Stresses at the Ends of the Hollow PC-Girders</li><li>The Degradation of Reinforced Concrete Bridge Elements</li><li>Determination of Material Design Values for Steel Fibre Reinforced Self-Stressing Concrete (SFRSSC) and Regular Steel Fibre Reinforced Concrete (SFRC) in Statically Indeterminate Round Panel Tests</li><li>Concrete Sustainable Buildings Using Domestic Wastewater Treated</li><li>Preliminary Investigation of Geopolymer Mixture Using GGBFS and Off-ASTM Class F Fly Ash</li><li>Effect of Thermal Stimulation of Superplasticizer on Basic Properties of Mortar</li><li>Influence of Eggshell Powder as Cementitious Blends in Cement Mortar</li><li>Blended Basic Oxygen Furnace (BOF) Slag with Ground Granulated Blast Furnace Slag (GGBFS) as a Pozzolanic Material</li><li>A Study on the Salt Preventive Properties of Blast Furnace Slag with Different Blaine Values and Curing Condition</li><li>The Study on Blast Furnace Slag on Different Conditions as Curing Condition and Blaine Value Ratio Influence Improving Strength Performance</li><li>Development of 100% Recycled Thermoplastic Composites for Sound Insulated Acoustic Panels</li><li>Impact of Basic Parameters on Heat and Moisture Process Simulation of Bamboo Building Envelope in China (I): Meteorological Parameters</li><li>Impact of Basic Parameters on Heat and Moisture Process Simulation of Bamboo Building Envelope in China (II): Material Parameters</li><li>Fabrication and Mechanical Behavior of Portland Cement Mortars Reinforced with Ichu Fibers</li><li>The Study Influence of Sugarcane Leaves Fibers Ratio on Compressive Strength of Fire Clay Bricks</li><li>Acetic Acid Modified Steel Slag via Dry Chemical Modification Method for Enhancing the Hydraulic Reactivity</li><li>Chapter 8: Waste Recycling and Degradation</li><li>Visible Light Photocatalytic Degradation of Methylene Blue Using Polypyrrole-Coated Molybdenum-Based Magnetic Photocatalyst</li><li>Valorization of Cotton Wastes for Production of Cellulose Nanocrystals</li><li>Investigation of Thermal and Mechanical Properties of Refractory Materials Produced from Metallurgical Waste</li><li>Microwave-Assisted Conversion of Waste Coffee Grounds to Turbostratic Carbon</li></ul>