Table of Contents
1.
Introduction
1.1. Photovoltaics: potential and orders of magnitude
1.2.
Photovoltaics: a choice of technology
1.3.
Photovoltaics: Technology evolution
1.4. Photovoltaics: Manufacturing chain and efficiency increases
1.5.
Photovoltaics: Impact of technology on energy pay-back time
1.6.
Beyond silicon single-junction solar cells.
1.7.
Building integrated photovoltaics.
1.8. PV in future energy systems
1.9.
References
2. Solar Spectra
2.1.
Interaction of sunlight and the earth's atmosphere
2.2.
Albedo
2.3. Indoor lighting
2.4.
"Lux" as a unit of light measurement
2.5.
Moonlight
2.6.
Irradiance and irradiation
2.7.
References
3. Solar Cells: Basics
Preamble: Some basic terms from semiconductor physics
3.1. The photovoltaic effect: Interaction of light and matter
3.2.
Conversion of light into electricity by a diode
3.3.
Separation of electrons and holes: the solar cell as diode
3.4.
Solar cell characteristics, equivalent circuits and key parameters
3.5.
Solar cell efficiency limits
3.6.
Spectral Response and Quantum Efficiency in Solar cells
3.7.
References
4.
Solar Cells: Optical and Recombination Losses
4.1. Optical losses
4.2.
Recombination losses
4.3.
References
5.
Crystalline silicon solar cells: Homojunction cells
5.1. Production of silicon wafers and solar cells
5.2.
Cell processing for the Al-BSF cell
5.3.
PERC cell (Passivated Emitter Rear Cell)
5.4.
Other Homojunction cell concepts
5.5. References
6.
Amorphous silicon solar cells
6.1.
Amorphous silicon: deposition method and layer properties
6.2.
Amorphous silicon solar cells
6.3. Microcrystalline silicon solar cells
6.4.
References
7.
Crystalline silicon solar cells: Heterojunction (HJT) cells
7.1.
Introduction
7.2. Cell Structure
7.3.
n- and p-type Wafers
7.4.
Cell Process Steps
7.5.
Temperature Coefficient of HJT Cells
7.6. Levelized Cost of Electricity (LCOE)
of HJT cells
7.7.
References
8. CdTe and CuInGaSe2 thin-film solar cells
8.1.
Thin-film polycrystalline materials
8.2.
CIGS solar cells
8.3.
CdTe/CdS solar cells
8.4. Flexible thin-film solar cells
8.5.
In-line fabrication
8.6.
Performance under critical conditions
8.7.
Environmental aspects
8.8. References
9.
Solar Module technology
9.1.
Electrical layout of solar modules
9.2.
Module architectures, materials and processes
9.3. Module testing, reliability and lifetime
9.4.
References
10.
Module deployment and energy rating
10.1.
Preliminary remarks
10.2. From power rating to energy rating
10.3.
Three relevant exceptions
10.4.
Energy losses and failure modes
10.5.
Simulation and monitoring: energy yield measurement
10.6. References
11.
Solar photovoltaics on land, water, and buildings
11.1.
Solar electricity for powering the word
11.2.
Solar on land
11.3.
Solar on water
11.4. Solar on buildings
11.5.
Solar in developing countries
11.6. Solar everywhere
11.7.
References
12.
Solar PV Systems
12.1. Overview Solar PV Systems
12.2.
The solar generator
12.3.
Off-grid PV systems
12.4.
Grid-connected PV systems
12.5.
Explanation of Symbols
12.6. References
13.
Photovoltaics in the future energy system
13.1.
Market development
13.2.
Regulatory issues
13.3.
Sustainability
13.4.
System integration
13.5.
References
