Characterization of Minerals, Metals, and Materials 2015

1 - Cover [Seite 1]
2 - Half Title [Seite 2]
3 - Title Page [Seite 4]
4 - Copyright Page [Seite 5]
5 - Table of Contents [Seite 6]
6 - Preface [Seite 16]
7 - About the Editors [Seite 18]
8 - Session Chairs [Seite 25]
9 - Characterization of Ferrous Metals [Seite 26]
9.1 - Study of Age Hardening Behavior in a 350 Grade Maraging Steel [Seite 27]
10 - Characterization of Welding and Solidification [Seite 35]
10.1 - Laser Welding between TWIP Steels and Automotive High-Strength Steels [Seite 36]
10.2 - Undercooling of Rapidly Solidified Droplets and Spray Formed Strips of Al-Cu (Sc) [Seite 44]
10.3 - Selective Laser Melting: Characteristics of IN718 Powder and Microstructures of Fabricated IN718 Sample [Seite 52]
11 - Method Development in Characterization [Seite 61]
11.1 - Advanced FIB Applications in Materials Research at CanmetMATERIALS [Seite 62]
11.2 - Cyclic Hardness Test PHYBALCHT: A New Short-Time Procedure to Estimate Fatigue Properties of Metallic Materials [Seite 69]
11.3 - Innovative Procedure for the Characterisation of Thermo-Mechanical Properties of Carbon Base Materials Using the Gleeble® 3800 System [Seite 77]
11.4 - Solid Solution Characterization in Metal by Original Tomographic Scanning Microwave Microscopy Technique [Seite 85]
12 - Characterization of Material Processing and Corrosion [Seite 93]
12.1 - Comparsion of the Mechanisms of Void Formation by Plastic Deformation in Single- and Dual-Phase BCC-Steels [Seite 94]
12.2 - Characterization of Sintering Dust, Blast Furnace Dust and Carbon Steel Electric Arc Furnace Dust [Seite 101]
12.3 - Influence of Mineralogical Characteristics of Iron Ore on Formation and Flow of Liquid Phase [Seite 109]
12.4 - Effect of Pressure on the Corrosion of Materials in High Temperature Water [Seite 117]
12.5 - The Effect of Strain Reversal during High Pressure Torsion on the Microstructure Evolution and Texture of Aluminum Alloys [Seite 125]
13 - Characterization of Composites [Seite 133]
13.1 - Bending Mechanical Behavior of Polyester Matrix Reinforced with Fique Fiber [Seite 134]
13.2 - Weibull Analysis of the Behavior on Tensile Strength of Hemp Fibers for Different Intervals of Fiber Diameters [Seite 139]
13.3 - Preparation and Characterization of Natural Rubber/Organophilic Clay Nanocomposites [Seite 147]
13.4 - Tensile Properties of Epoxy Composites Reinforced with Continuous PALF Fibers [Seite 155]
13.5 - Replacement of Carbon Black on Natural Rubber Composites and Nanocomposites - Part 1 [Seite 161]
13.6 - Flexural Mechanical Characterization of Epoxy Composites Reinforced with Continuous Banana Fibers [Seite 169]
13.7 - Influence of the Nanoclay Cloisite 20A Incorporation on Properties of Acrylonitrile Butadiene Styrene (ABS) [Seite 175]
14 - Characterization of Non-Ferrous Metals [Seite 180]
14.1 - Characterization of Closed-Cell Aluminium Foams Subjected to Compressive Loading [Seite 181]
15 - Characterization of Materials Extraction [Seite 189]
15.1 - Improvement on Performance of Mg-C Refractories as Lining of Vanadium-Extraction Converters [Seite 190]
15.2 - Analysis on Deep Treatment Effect of Coking Wastewater Using 3D Electrode Combined with Fenton Reagent [Seite 198]
15.3 - Characterization of Steelmaking Desulfurization Slag [Seite 206]
15.4 - Development and Characterization of Nanomaterials for Zinc Vapor Capture [Seite 214]
15.5 - Separation of Roasted Coating and Core in Double-Layered Pellet Roasting for Pretreatment of Sulfur and Arsenic-Bearing Gold Concentrate [Seite 222]
15.6 - Prediction for the Surface Tension of FeO-TiO2-Ti2O3-X(SiO2, CaO, MgO) Slag Systems [Seite 230]
16 - Characterization of Soft Materials [Seite 238]
16.1 - Constitutive Modeling of a Glass Fiber-Reinforced PTFE Gasketed-Joint Under a Re-Torque [Seite 239]
16.2 - Microwave Absorption Characteristics of Tire [Seite 247]
16.3 - Optical Evaluation for Biomimetic Microlens Array on PDMS Sheet [Seite 256]
16.4 - Behavior of Linear Low Density Polyethylene Films Under UV Ageing for Agricultural Application [Seite 263]
16.5 - Photoacoustic Thermal Characterization of Malva Fibers [Seite 269]
16.6 - Mechanical, Morphological and Thermal Properties of Açaí Fibers Reinforced Biodegradable Polymer Composites [Seite 275]
16.7 - Influence of Clay Exfoliation on the Properties of EVOH/Clay Flexible Films [Seite 283]
17 - Characterization of Minerals [Seite 290]
17.1 - Chemical Resistance of Ornamental Compound Stone Produced with Marble Waste and Unsaturated Polyester [Seite 291]
17.2 - Characterization of Feldspar by Instrumental Analytical Techniques [Seite 298]
17.3 - Microwave Power Absorption Characteristics of Iron Oxides [Seite 305]
17.4 - Qualitative and Mineralogical Characterization of Lead Deposit in Ishiagu, Ebonyi State, Nigeria [Seite 312]
17.5 - Sintering Characteristics of Iron Ores with Addition of Laterite Nickel Ores [Seite 322]
18 - Characterization of Clays and Ceramics [Seite 330]
18.1 - Alumina Superfines Based Geopolymeres: Developments and Characterization [Seite 331]
18.2 - Densification and Mechanical Properties of Reaction Sintered Al2O3-MgO-CaO Refractory [Seite 340]
18.3 - Influence of Sintering Temperature on Microstructure and Properties of Magnesia Partially Stabilized Zirconia Ceramics [Seite 347]
18.4 - Evaluation of Structural Clay Brick Masonry Units by Weibull Analysis and Brazilian Code and Specifications [Seite 354]
18.5 - Brazilian Bentonite Submitted to Mild Acid Treatment Under Moderated Conditions [Seite 362]
18.6 - Increase of Flexural Strength of Red Ceramic Pieces Incorporated with Ornamental Rock Waste: Application of Weibull Statistic for Determination of Best Firing Temperature [Seite 370]
19 - Characterization of Electronic, Magnetic, Environmental, and Advanced Materials [Seite 378]
19.1 - Shape Memory Characteristics of Rapidly Solidified Ti-37.8Cu-18.7Ni Alloy Ribbons [Seite 379]
19.2 - Effects of Casting Conditions on the Structure and Magnetic Properties of the Co-19 at.%Al-6 at. %W Alloy [Seite 384]
19.3 - Characterization of the Phase Composition of Nanosized Lithium Titanates Synthesized by Inductive Thermal Plasma [Seite 391]
19.4 - Improved Hydrogen Storage Properties of Mg(BH4)2-Mg(AIH4)2 Combined Systems [Seite 399]
19.5 - Optical Parameters of CdS1-yTey Thin Films [Seite 407]
20 - Poster Session [Seite 415]
20.1 - The Effects of High Al2O3 on the Metallurgical Properties of Sinter [Seite 416]
20.2 - Characterization of Formulations with Ornamental Rock Waste and Clays to Produce Ceramic Paver [Seite 423]
20.3 - Evaluation of Thermoelectric Methods for the Detection of Fretting Damage in 7075-T6 and Ti-6Al-4V Alloys [Seite 431]
20.4 - Optimization Research of Peritectic Steel Mold Flux with CO2O3 Doping [Seite 439]
20.5 - Effect of Potential on Characteristics of Oxide Product Layers on Chalcopyrite [Seite 445]
20.6 - Pullout Tests Behavior of Epoxy Matrix Reinforced with Malva Fibers [Seite 453]
20.7 - Tensile Strength of Polyester Composites Reinforced with Fique Fibers [Seite 460]
20.8 - Characterization of Polyester Matrix Reinforced with Banana Fibers Thermal Properties by Photoacoustic Technique [Seite 466]
20.9 - Hot-Pressing and Mechanical Properties of BN Based Composites [Seite 474]
20.10 - Experimental Study of Advanced Treatment of Coking Wastewater Using PFS Coagulation-Photocatalytic Oxidation Technology [Seite 481]
20.11 - Phase Transformation and Element Migration in the Oxidation Process of Nickel-Copper Sulfide Ore [Seite 489]
20.12 - Sintering and Performance of High Alumina Refractory with ZrO2 Addition [Seite 497]
20.13 - Iron Recovery from Copper Slag Through Oxidation-Reduction Magnetic Concentration at Intermediate Temperature [Seite 502]
20.14 - Characterization and Evaluation of Incorporation the Casting Sand in Mortar [Seite 510]
20.15 - Carbonization of Coals Mixed Iron Ore Fines and Gasification of Resulting Iron Coke with Co2: Transformation of Iron Minerals and Coke Properties [Seite 515]
20.16 - Experimental Investigation on High Temperature Roasting of Basic Oxygen Furnace Slag [Seite 524]
20.17 - Experimental Study on Semi-Dry Flue Gas Desulfurization Ash Used in Steel Slag Composite Material [Seite 531]
20.18 - Effect of Manganese on the Formation Mechanisms of Silico-Ferrite of Calcium and Aluminum (SFCA) [Seite 538]
20.19 - Izod Impact Test in Epoxi Matrix Composites Reinforced with Hemp Fiber [Seite 545]
20.20 - Zinc Recovery from Zinc Oxide Flue Dust during the Neutral Leaching Process by Ultrasound [Seite 551]
20.21 - Microhardness and Deformation Storage Energy Density of NiTi Thin Films [Seite 559]
20.22 - Morphology and Distribution of Nb-Rich Phase and Graphite in Nb Microalloyed Ductile Iron [Seite 567]
20.23 - Cause Analysis on Buildup Formation of Carbon Sleeve in Continuous Annealing Furnace for Non-Oriented Silicon Steel Produced by CSP Process [Seite 574]
20.24 - Analysis of the Feasibility of Using Soil from the Municipality of Goytacazes/RJ for Production of Soil-Cement Brick [Seite 581]
20.25 - Effects of Niobium Microalloying on the Pearlite of Ductile Iron [Seite 587]
20.26 - Evaluation of Palf Fibers Elasticity Modulus with Different Diameters by Weibull Analysis [Seite 593]
20.27 - Research on Reasonable Particle Size of Coal Blends for Blast Furnace Injection: Semi Coke and Bituminous Coal [Seite 599]
20.28 - Recovery of Copper from Slow Cooled Ausmelt Furnace Slag by Floatation [Seite 606]
20.29 - Characterization of Mechanical Properties of PP/HMSPP Blends with Natural and Synthetic Polymers Subjected to Gamma-Irradiation [Seite 614]
20.30 - Effect of Mercerization and Electron-Beam Irradiation on Mechanical Properties of High Density Polyethylene (HDPE) / Brazil Nut Pod Fiber (BNPF)Biocomposites [Seite 622]
20.31 - Analysis of Porosity and Flexural Strength Changes of Red Ceramic Pieces Incorporated with Ornamental Rock Waste [Seite 630]
20.32 - Effects of Accelerated Thermal Aging on Polypropylene Modified by Irradiation Process [Seite 636]
20.33 - Mechanical Properties of Polypropylene Nanocomposites with Organoclay and Discarded Bond Paper [Seite 644]
20.34 - Recovery of Mercury and Lead from Wastewater by Sulfide Precipitation-Flotation [Seite 652]
20.35 - Clinker Production from Waste: From Cellulose Industry and Processing Marble and Granite Industry [Seite 660]
20.36 - Study of Wettability of Clayey Ceramic and Fluorescent Lamp Glass Waste Powders [Seite 666]
20.37 - Biodegradable Starch/Copolyesters Film Reinforced with Silica Nanoparticles: Preparation and Characterization [Seite 672]
20.38 - Cyanidation Study of Slag Rich in Silver [Seite 679]
20.39 - Thermophysical Properties of Modified Ti-Bearing Blast Furnace Slags [Seite 687]
20.40 - PHYBALSIT Fatigue Assessment and Life Time Calculation of the Ductile Cast Iron EN-GJS-600 at Ambient and Elevated Temperatures [Seite 694]
20.41 - Gold Leaching Characteristics and Intensification of a High S and As-Bearing Gold Concentrate [Seite 702]
20.42 - Electrochemical Properties of Al-Cu Alloys in NaCl Solutions [Seite 710]
20.43 - Evaluation of Acid Treatment on Brown Bentonite [Seite 718]
20.44 - Numerical Simulation of the Copper Steel Composite Stave Heat Transfer in the Belly and Lower Shaft Region of the Blast Furnace [Seite 726]
20.45 - Effect of Applied Pressure on the Tribological Behaviour of Dual Particle Size Rutile Reinforced LM13 Alloy Composite [Seite 737]
20.46 - Investigation on Mechanical and Thermal Behaviours of Copolyester/PLA Blend Reinforced with TiO2 Nanoparticle [Seite 745]
20.47 - Influence of Cu²+ and Zn²+ on the Dissolution of Ag in S2O3²- Medium [Seite 751]
20.48 - Photocatalytic H2 Production under Visible Light Irradiation on Novel Heterostructure NiS/ZnS Nanosheet Photocatalyst [Seite 758]
21 - Author Index [Seite 766]
22 - Subject Index [Seite 770]