Advanced Materials and Processing IV

Overview of Current International Magnesium Research and Recent CAST CRC DevelopmentsAdvanced Wood- and Bio-Composites: Enhanced Performance and SustainabilityNew Ceramic Membrane Materials for Gas PurificationA Ductile UFG Al Alloy via Cryomilling and Quasi-Isostatic ForgingCompaction of Ti-6Al-4V Powder by ECAE with Back-PressureOptimising the Model of Gas-Jet Quenching of a Carburised GearMetallurgical Nature at the Interface between Tool Shoulder and Workpiece during Friction Stir WeldingMultifarious Fracture Features of CuZrAlGd(Ag) Bulk Metallic GlassesBiomechanical and Biocorrosion Properties of Nanostructured TitaniumCharacterization of Indentation Size Effect of Hardness Using a Loading Curve from Crystalline MaterialsThe Effect of Additives and Substrate Conditions on the Copper Electrodeposition for Thin Film ApplicationsSurface Characteristics of the Anodized and Hydrothermally Treated Titanium Affected by the Current Density, Voltage, and Time Surface Characterization of an Extruded 6060 Al AlloyMechanical Properties of Directionally Arrayed Dendrites in the Ni3Al Matrix AlloyMechanical Properties of Micro-Porous Metals Produced by Space-Holding SinteringGrowth and Properties of Stannite-Quaternary Cu2ZnSnSe4 Thin Films Prepared by Selenization of Sputtered Binary Compound PrecursorsFabrication of High Mg Containing Al-Mg Alloy Sheets by Twin Roll Strip Casting Warm Hydroformability and Mechanical Properties of Pre- and Post- Heat Treated Al6061 Tubes Synthesis and Characterization of Nitrogen Implanted Titanium AlloysControl of Degradation of Biocompatible Magnesium in a Pseudo-Physiological Environment by a Ceramic Like Anodized Coating Sonoelectroplating of Sn - Bi Solder Film from EDTA BathMicrostructure of Rapidly Solidified Ti-46Al-2Cr-2Nb-xY Alloys Studies on Porous Titanium Alloy Implant Manufactured by Three Dimensional Solid Freeform Fabrication SystemInfluence of Reaction Temperature for the Manufacturing of Al-3Ti and Al-3B Master Alloys and their Grain Refining Efficiency on a Al-7Si AlloyEnhancing Fatigue Properties of Nanostructured Metals and Alloys Microstructural Modification of Metallic Materials by Electromagnetic Processing and the Theoretical Interpretation Approaches to the Design and Processing of Novel Titanium Alloys Microstructure and Morphology of Alumina-Iron Nanocomposite Powders Produced by High Energy Mechanical Milling Characterisation of Ti(Al,O)-Al2O3 Composite Powders and Thermally Sprayed CoatingsUltrafine Grained Ti-47Al-2Cr (at%) Alloy Prepared by High Energy Mechanical Milling and Hot Isostatic PressingEffect of Composition on the Morphology and Hardness of Nanostructured Cu Based Composite and Alloy Powders/Granules Produced by High Energy Mechanical MillingA Novel Process for Lowering the Cost of TitaniumEffect of Carbon Addition on the Microstructure and Properties of M3:2 High Speed Steels Processed by Powder Metallurgy Consolidation of TiAl Powder by Thermal Spray ProcessesSyntactic Foams Consolidated with Starch: Modelling for Pre-Mould ProcessingSyntactic Foams Consolidated with Starch: Mixing Behaviour for Post-Mould ProcessingChemical Imaging of the Spatial Distribution and Interactions of Tannin Dispersal in Bioplastic SystemsNew Strategy toward Novel Hyperbranched Phenol-Formaldehyde Resin: Synthesis, Characterization and Curing StudyThe Use of Aqueous Urea as Chemical Denaturant in Processing CGM into a Biodegradable Polymer Material Production of High Purity Alumina and Zeolite from Low-Grade Kaolin Control of Shell Thickness in Silica-Coating of AgI NanoparticlesTriethanolamine Molybdate, a New Polymeric Precursor for Molybdenum NitridePolycondensation of Urea and Boric Acid to Give Polyborate Ester, a Precursor for Boron Nitride Processing of Mullite Whiskers from KaolinJoining of Ceramic Components in the Green State via LPIMSynthesis and Characterisation of Titania Nanotubes: Effect of Phase and Crystallite Size on Nanotube FormationHighly c-Axis Oriented Al-Doped ZnO Thin Films Grown in Premixed H2/Ar Sputtering GasFabrication and Microstructure Evaluation of Oxide and Carbide Ceramic Coatings onto Heterogeneous Substrates by Solid-Vapor ReactionOrientation Control in Multilayered Alumina Prepared Using Electrophoretic Deposition in a Strong Magnetic FieldDirect Shaping of Alumina Ceramics by Electrophoretic Deposition Using Conductive Polymer-Coated Ceramic SubstratesTransformation of Bone Origin Hydroxyapatite at Elevated Temperatures and in Selected AtmospheresHigh-Frequency Induction Heating Sintering of Ultra-Fine Al2O3-(ZrO2+X%mol Y2O3) BioceramicsThermal, Mechanical and Morphological Performance of BisGMA/TiO2 NanocompositeTensile Deformation and Fracture in a Bulk Nanostructured Al-5083/SiCp Composite at Elevated TemperaturesFabrication of Al-Si-Cu-Mg-Zn Alloy Matrix Composite Reinforced with Submicrometer Sized Al2O3 Particles Formed by Displacement ReactionEnvironmentally Intelligent BiocompositesPreparation and Characterization of Alumina/TZP Particulate CompositesDeformation Behaviour of Composites Reinforced with Four Different Linen Flax Yarn StructuresFabrication and Characterization of Polypropylene/Ethylene-Octene Copolymer Blend NanocompositesFabrication and Characterization of Sisal/Glass and Polypropylene Hybrid CompositesThermal, Morphological and Dynamic Mechanical Characterization of Melt Blended PC NanocompositesRheological Characterization of Jute/HDPE CompositesThe Abrasive Wear of Alumina Matrix Particulate Composites at Different Environments of WorkImproving Hygrothermal Performance in Epoxy-Biofibre CompositesMWNT Polymer Nanocomposites Based on P3HTIntercalation of Montmorillonite by Interlayer Adsorption and Complex FormationOn Feasibility of Ply-Layup Orientation in CF/Epoxy Composite Laminates Using Rayleigh Probes Evaluation of the Mechanical Properties of Injection Moulded Hemp Fibre Reinforced Polypropylene CompositesNatural Fibre-Reinforced Thermoplastics Processed by Rotational MouldingNumerical Study of Functionally Graded MaterialsAccelerated Weathering of Modified Wood Flour Plastic CompositesInfluence of Alkali Treatment on the Interfacial Bond Strength of Industrial Hemp Fibre Reinforced Epoxy Composites: Effect of Variation from the Ideal Stoicheometric Ratio of Epoxy Resin to Curing AgentThe Effects of Residual Lignin Content on Wood Fibre Reinforced Polypropylene CompositesElectrical Spectroscopy Studies of Organic/Inorganic Nano CompositesImprovement of the Red Mud Polymer-Matrix Composites by Organophillization of Red MudHemp Fibre Reinforced Poly(Lactic Acid) CompositesNatural and Man-Made Cellulose Fiber Reinforced Hybrid Polypropylene Composites: Effect of Fire RetardantsComparative Study of Copper Diffusion in Plasma Treated Low-k Dielectric Thin Film Using XPS and SIMSGrowth and Evaluation of GaN Grown on Patterned Sapphire SubstratesCharacteristics Comparison between GaN Epilayers Grown on Patterned and Unpatterned Sapphire Substrate (0001)Electrical Properties of Mn-Co-Ni Oxides Prepared at Low TemperaturesActuation Behavior of CP Actuator Based on Polypyrrole and PVDFA Novel Nano-Water-Purifying MaterialCharacterization of Quasi-Nano Crystalline Ni-Zn Ferrite Powders Prepared by Self-Propagating High Temperature SynthesisDurability and Performance of Indigenous Amorphous Silica in Advanced Cementitious Systems