Advanced Materials and Processing IV
Published on 15. November 2007
394 pages
978-3-03813-161-8 (ISBN)
Description
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This special volume comprises 85 refereed papers. The selection of the papers was based upon the recommendations of the reviewers and the discretion of the editors. In most cases, the accepted papers were further polished to improve their readability.
This special volume comprises 85 refereed papers. The selection of the papers was based upon the recommendations of the reviewers and the discretion of the editors. In most cases, the accepted papers were further polished to improve their readability.
More details
Series
Language
English
Place of publication
Zurich-Durnten
Switzerland
Target group
Professional and scholarly
Illustrations
Illustrations
File size
149,93 MB
ISBN-13
978-3-03813-161-8 (9783038131618)
DOI
10.4028/b-AqzGd7
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
De Liang Zhang | Kim L. Pickering | Brian Gabbitas
Advanced Materials and Processing IV
Book
12/2007
Trans Tech Publications Ltd
€297.12
Article exhausted; check different version
De Liang Zhang | Kim L. Pickering | Brian Gabbitas
Advanced Materials and Processing IV
Software
12/2007
Trans Tech Publications Ltd
€275.36
Shipment within 10-20 days
Content
Committees and Sponsors
Preface
Keynote
Overview of Current International Magnesium Research and Recent CAST CRC Developments
Advanced Wood- and Bio-Composites: Enhanced Performance and Sustainability
New Ceramic Membrane Materials for Gas Purification
A Ductile UFG Al Alloy via Cryomilling and Quasi-Isostatic Forging
Metals
Compaction of Ti-6Al-4V Powder by ECAE with Back-Pressure
Optimising the Model of Gas-Jet Quenching of a Carburised Gear
Metallurgical Nature at the Interface between Tool Shoulder and Workpiece during Friction Stir Welding
Multifarious Fracture Features of CuZrAlGd(Ag) Bulk Metallic Glasses
Biomechanical and Biocorrosion Properties of Nanostructured Titanium
Characterization of Indentation Size Effect of Hardness Using a Loading Curve from Crystalline Materials
The Effect of Additives and Substrate Conditions on the Copper Electrodeposition for Thin Film Applications
Surface Characteristics of the Anodized and Hydrothermally Treated Titanium Affected by the Current Density, Voltage, and Time
Surface Characterization of an Extruded 6060 Al Alloy
Mechanical Properties of Directionally Arrayed Dendrites in the Ni3Al Matrix Alloy
Mechanical Properties of Micro-Porous Metals Produced by Space-Holding Sintering
Growth and Properties of Stannite-Quaternary Cu2ZnSnSe4 Thin Films Prepared by Selenization of Sputtered Binary Compound Precursors
Fabrication of High Mg Containing Al-Mg Alloy Sheets by Twin Roll Strip Casting
Warm Hydroformability and Mechanical Properties of Pre- and Post- Heat Treated Al6061 Tubes
Synthesis and Characterization of Nitrogen Implanted Titanium Alloys
Control of Degradation of Biocompatible Magnesium in a Pseudo-Physiological Environment by a Ceramic Like Anodized Coating
Sonoelectroplating of Sn - Bi Solder Film from EDTA Bath
Microstructure of Rapidly Solidified Ti-46Al-2Cr-2Nb-xY Alloys
Studies on Porous Titanium Alloy Implant Manufactured by Three Dimensional Solid Freeform Fabrication System
Influence of Reaction Temperature for the Manufacturing of Al-3Ti and Al-3B Master Alloys and their Grain Refining Efficiency on a Al-7Si Alloy
Enhancing Fatigue Properties of Nanostructured Metals and Alloys
Microstructural Modification of Metallic Materials by Electromagnetic Processing and the Theoretical Interpretation
Approaches to the Design and Processing of Novel Titanium Alloys
Microstructure and Morphology of Alumina-Iron Nanocomposite Powders Produced by High Energy Mechanical Milling
Characterisation of Ti(Al,O)-Al2O3 Composite Powders and Thermally Sprayed Coatings
Ultrafine Grained Ti-47Al-2Cr (at%) Alloy Prepared by High Energy Mechanical Milling and Hot Isostatic Pressing
Effect of Composition on the Morphology and Hardness of Nanostructured Cu Based Composite and Alloy Powders/Granules Produced by High Energy Mechanical Milling
A Novel Process for Lowering the Cost of Titanium
Effect of Carbon Addition on the Microstructure and Properties of M3:2 High Speed Steels Processed by Powder Metallurgy
Consolidation of TiAl Powder by Thermal Spray Processes
Polymers
Syntactic Foams Consolidated with Starch: Modelling for Pre-Mould Processing
Syntactic Foams Consolidated with Starch: Mixing Behaviour for Post-Mould Processing
Chemical Imaging of the Spatial Distribution and Interactions of Tannin Dispersal in Bioplastic Systems
New Strategy toward Novel Hyperbranched Phenol-Formaldehyde Resin: Synthesis, Characterization and Curing Study
The Use of Aqueous Urea as Chemical Denaturant in Processing CGM into a Biodegradable Polymer Material
Ceramics
Production of High Purity Alumina and Zeolite from Low-Grade Kaolin
Control of Shell Thickness in Silica-Coating of AgI Nanoparticles
Triethanolamine Molybdate, a New Polymeric Precursor for Molybdenum Nitride
Polycondensation of Urea and Boric Acid to Give Polyborate Ester, a Precursor for Boron Nitride
Processing of Mullite Whiskers from Kaolin
Joining of Ceramic Components in the Green State via LPIM
Synthesis and Characterisation of Titania Nanotubes: Effect of Phase and Crystallite Size on Nanotube Formation
Highly c-Axis Oriented Al-Doped ZnO Thin Films Grown in Premixed H2/Ar Sputtering Gas
Fabrication and Microstructure Evaluation of Oxide and Carbide Ceramic Coatings onto Heterogeneous Substrates by Solid-Vapor Reaction
Orientation Control in Multilayered Alumina Prepared Using Electrophoretic Deposition in a Strong Magnetic Field
Direct Shaping of Alumina Ceramics by Electrophoretic Deposition Using Conductive Polymer-Coated Ceramic Substrates
Transformation of Bone Origin Hydroxyapatite at Elevated Temperatures and in Selected Atmospheres
High-Frequency Induction Heating Sintering of Ultra-Fine Al2O3-(ZrO2+X%mol Y2O3) Bioceramics
Composites
Thermal, Mechanical and Morphological Performance of BisGMA/TiO2 Nanocomposite
Tensile Deformation and Fracture in a Bulk Nanostructured Al-5083/SiCp Composite at Elevated Temperatures
Fabrication of Al-Si-Cu-Mg-Zn Alloy Matrix Composite Reinforced with Submicrometer Sized Al2O3 Particles Formed by Displacement Reaction
Environmentally Intelligent Biocomposites
Preparation and Characterization of Alumina/TZP Particulate Composites
Deformation Behaviour of Composites Reinforced with Four Different Linen Flax Yarn Structures
Fabrication and Characterization of Polypropylene/Ethylene-Octene Copolymer Blend Nanocomposites
Fabrication and Characterization of Sisal/Glass and Polypropylene Hybrid Composites
Thermal, Morphological and Dynamic Mechanical Characterization of Melt Blended PC Nanocomposites
Rheological Characterization of Jute/HDPE Composites
The Abrasive Wear of Alumina Matrix Particulate Composites at Different Environments of Work
Improving Hygrothermal Performance in Epoxy-Biofibre Composites
MWNT Polymer Nanocomposites Based on P3HT
Intercalation of Montmorillonite by Interlayer Adsorption and Complex Formation
On Feasibility of Ply-Layup Orientation in CF/Epoxy Composite Laminates Using Rayleigh Probes
Evaluation of the Mechanical Properties of Injection Moulded Hemp Fibre Reinforced Polypropylene Composites
Natural Fibre-Reinforced Thermoplastics Processed by Rotational Moulding
Numerical Study of Functionally Graded Materials
Accelerated Weathering of Modified Wood Flour Plastic Composites
Influence of Alkali Treatment on the Interfacial Bond Strength of Industrial Hemp Fibre Reinforced Epoxy Composites: Effect of Variation from the Ideal Stoicheometric Ratio of Epoxy Resin to Curing Agent
The Effects of Residual Lignin Content on Wood Fibre Reinforced Polypropylene Composites
Electrical Spectroscopy Studies of Organic/Inorganic Nano Composites
Improvement of the Red Mud Polymer-Matrix Composites by Organophillization of Red Mud
Hemp Fibre Reinforced Poly(Lactic Acid) Composites
Natural and Man-Made Cellulose Fiber Reinforced Hybrid Polypropylene Composites: Effect of Fire Retardants
Functional Materials
Comparative Study of Copper Diffusion in Plasma Treated Low-k Dielectric Thin Film Using XPS and SIMS
Growth and Evaluation of GaN Grown on Patterned Sapphire Substrates
Characteristics Comparison between GaN Epilayers Grown on Patterned and Unpatterned Sapphire Substrate (0001)
Electrical Properties of Mn-Co-Ni Oxides Prepared at Low Temperatures
Actuation Behavior of CP Actuator Based on Polypyrrole and PVDF
A Novel Nano-Water-Purifying Material
Characterization of Quasi-Nano Crystalline Ni-Zn Ferrite Powders Prepared by Self-Propagating High Temperature Synthesis
Durability and Performance of Indigenous Amorphous Silica in Advanced Cementitious Systems
Preface
Keynote
Overview of Current International Magnesium Research and Recent CAST CRC Developments
Advanced Wood- and Bio-Composites: Enhanced Performance and Sustainability
New Ceramic Membrane Materials for Gas Purification
A Ductile UFG Al Alloy via Cryomilling and Quasi-Isostatic Forging
Metals
Compaction of Ti-6Al-4V Powder by ECAE with Back-Pressure
Optimising the Model of Gas-Jet Quenching of a Carburised Gear
Metallurgical Nature at the Interface between Tool Shoulder and Workpiece during Friction Stir Welding
Multifarious Fracture Features of CuZrAlGd(Ag) Bulk Metallic Glasses
Biomechanical and Biocorrosion Properties of Nanostructured Titanium
Characterization of Indentation Size Effect of Hardness Using a Loading Curve from Crystalline Materials
The Effect of Additives and Substrate Conditions on the Copper Electrodeposition for Thin Film Applications
Surface Characteristics of the Anodized and Hydrothermally Treated Titanium Affected by the Current Density, Voltage, and Time
Surface Characterization of an Extruded 6060 Al Alloy
Mechanical Properties of Directionally Arrayed Dendrites in the Ni3Al Matrix Alloy
Mechanical Properties of Micro-Porous Metals Produced by Space-Holding Sintering
Growth and Properties of Stannite-Quaternary Cu2ZnSnSe4 Thin Films Prepared by Selenization of Sputtered Binary Compound Precursors
Fabrication of High Mg Containing Al-Mg Alloy Sheets by Twin Roll Strip Casting
Warm Hydroformability and Mechanical Properties of Pre- and Post- Heat Treated Al6061 Tubes
Synthesis and Characterization of Nitrogen Implanted Titanium Alloys
Control of Degradation of Biocompatible Magnesium in a Pseudo-Physiological Environment by a Ceramic Like Anodized Coating
Sonoelectroplating of Sn - Bi Solder Film from EDTA Bath
Microstructure of Rapidly Solidified Ti-46Al-2Cr-2Nb-xY Alloys
Studies on Porous Titanium Alloy Implant Manufactured by Three Dimensional Solid Freeform Fabrication System
Influence of Reaction Temperature for the Manufacturing of Al-3Ti and Al-3B Master Alloys and their Grain Refining Efficiency on a Al-7Si Alloy
Enhancing Fatigue Properties of Nanostructured Metals and Alloys
Microstructural Modification of Metallic Materials by Electromagnetic Processing and the Theoretical Interpretation
Approaches to the Design and Processing of Novel Titanium Alloys
Microstructure and Morphology of Alumina-Iron Nanocomposite Powders Produced by High Energy Mechanical Milling
Characterisation of Ti(Al,O)-Al2O3 Composite Powders and Thermally Sprayed Coatings
Ultrafine Grained Ti-47Al-2Cr (at%) Alloy Prepared by High Energy Mechanical Milling and Hot Isostatic Pressing
Effect of Composition on the Morphology and Hardness of Nanostructured Cu Based Composite and Alloy Powders/Granules Produced by High Energy Mechanical Milling
A Novel Process for Lowering the Cost of Titanium
Effect of Carbon Addition on the Microstructure and Properties of M3:2 High Speed Steels Processed by Powder Metallurgy
Consolidation of TiAl Powder by Thermal Spray Processes
Polymers
Syntactic Foams Consolidated with Starch: Modelling for Pre-Mould Processing
Syntactic Foams Consolidated with Starch: Mixing Behaviour for Post-Mould Processing
Chemical Imaging of the Spatial Distribution and Interactions of Tannin Dispersal in Bioplastic Systems
New Strategy toward Novel Hyperbranched Phenol-Formaldehyde Resin: Synthesis, Characterization and Curing Study
The Use of Aqueous Urea as Chemical Denaturant in Processing CGM into a Biodegradable Polymer Material
Ceramics
Production of High Purity Alumina and Zeolite from Low-Grade Kaolin
Control of Shell Thickness in Silica-Coating of AgI Nanoparticles
Triethanolamine Molybdate, a New Polymeric Precursor for Molybdenum Nitride
Polycondensation of Urea and Boric Acid to Give Polyborate Ester, a Precursor for Boron Nitride
Processing of Mullite Whiskers from Kaolin
Joining of Ceramic Components in the Green State via LPIM
Synthesis and Characterisation of Titania Nanotubes: Effect of Phase and Crystallite Size on Nanotube Formation
Highly c-Axis Oriented Al-Doped ZnO Thin Films Grown in Premixed H2/Ar Sputtering Gas
Fabrication and Microstructure Evaluation of Oxide and Carbide Ceramic Coatings onto Heterogeneous Substrates by Solid-Vapor Reaction
Orientation Control in Multilayered Alumina Prepared Using Electrophoretic Deposition in a Strong Magnetic Field
Direct Shaping of Alumina Ceramics by Electrophoretic Deposition Using Conductive Polymer-Coated Ceramic Substrates
Transformation of Bone Origin Hydroxyapatite at Elevated Temperatures and in Selected Atmospheres
High-Frequency Induction Heating Sintering of Ultra-Fine Al2O3-(ZrO2+X%mol Y2O3) Bioceramics
Composites
Thermal, Mechanical and Morphological Performance of BisGMA/TiO2 Nanocomposite
Tensile Deformation and Fracture in a Bulk Nanostructured Al-5083/SiCp Composite at Elevated Temperatures
Fabrication of Al-Si-Cu-Mg-Zn Alloy Matrix Composite Reinforced with Submicrometer Sized Al2O3 Particles Formed by Displacement Reaction
Environmentally Intelligent Biocomposites
Preparation and Characterization of Alumina/TZP Particulate Composites
Deformation Behaviour of Composites Reinforced with Four Different Linen Flax Yarn Structures
Fabrication and Characterization of Polypropylene/Ethylene-Octene Copolymer Blend Nanocomposites
Fabrication and Characterization of Sisal/Glass and Polypropylene Hybrid Composites
Thermal, Morphological and Dynamic Mechanical Characterization of Melt Blended PC Nanocomposites
Rheological Characterization of Jute/HDPE Composites
The Abrasive Wear of Alumina Matrix Particulate Composites at Different Environments of Work
Improving Hygrothermal Performance in Epoxy-Biofibre Composites
MWNT Polymer Nanocomposites Based on P3HT
Intercalation of Montmorillonite by Interlayer Adsorption and Complex Formation
On Feasibility of Ply-Layup Orientation in CF/Epoxy Composite Laminates Using Rayleigh Probes
Evaluation of the Mechanical Properties of Injection Moulded Hemp Fibre Reinforced Polypropylene Composites
Natural Fibre-Reinforced Thermoplastics Processed by Rotational Moulding
Numerical Study of Functionally Graded Materials
Accelerated Weathering of Modified Wood Flour Plastic Composites
Influence of Alkali Treatment on the Interfacial Bond Strength of Industrial Hemp Fibre Reinforced Epoxy Composites: Effect of Variation from the Ideal Stoicheometric Ratio of Epoxy Resin to Curing Agent
The Effects of Residual Lignin Content on Wood Fibre Reinforced Polypropylene Composites
Electrical Spectroscopy Studies of Organic/Inorganic Nano Composites
Improvement of the Red Mud Polymer-Matrix Composites by Organophillization of Red Mud
Hemp Fibre Reinforced Poly(Lactic Acid) Composites
Natural and Man-Made Cellulose Fiber Reinforced Hybrid Polypropylene Composites: Effect of Fire Retardants
Functional Materials
Comparative Study of Copper Diffusion in Plasma Treated Low-k Dielectric Thin Film Using XPS and SIMS
Growth and Evaluation of GaN Grown on Patterned Sapphire Substrates
Characteristics Comparison between GaN Epilayers Grown on Patterned and Unpatterned Sapphire Substrate (0001)
Electrical Properties of Mn-Co-Ni Oxides Prepared at Low Temperatures
Actuation Behavior of CP Actuator Based on Polypyrrole and PVDF
A Novel Nano-Water-Purifying Material
Characterization of Quasi-Nano Crystalline Ni-Zn Ferrite Powders Prepared by Self-Propagating High Temperature Synthesis
Durability and Performance of Indigenous Amorphous Silica in Advanced Cementitious Systems
