Advanced Materials and Processing IV

<ul><li>Overview of Current International Magnesium Research and Recent CAST CRC Developments</li><li>Advanced Wood- and Bio-Composites: Enhanced Performance and Sustainability</li><li>New Ceramic Membrane Materials for Gas Purification</li><li>A Ductile UFG Al Alloy via Cryomilling and Quasi-Isostatic Forging</li><li>Compaction of Ti-6Al-4V Powder by ECAE with Back-Pressure</li><li>Optimising the Model of Gas-Jet Quenching of a Carburised Gear</li><li>Metallurgical Nature at the Interface between Tool Shoulder and Workpiece during Friction Stir Welding</li><li>Multifarious Fracture Features of CuZrAlGd(Ag) Bulk Metallic Glasses</li><li>Biomechanical and Biocorrosion Properties of Nanostructured Titanium</li><li>Characterization of Indentation Size Effect of Hardness Using a Loading Curve from Crystalline Materials</li><li>The Effect of Additives and Substrate Conditions on the Copper Electrodeposition for Thin Film Applications</li><li>Surface Characteristics of the Anodized and Hydrothermally Treated Titanium Affected by the Current Density, Voltage, and Time </li><li>Surface Characterization of an Extruded 6060 Al Alloy</li><li>Mechanical Properties of Directionally Arrayed Dendrites in the Ni₃Al Matrix Alloy</li><li>Mechanical Properties of Micro-Porous Metals Produced by Space-Holding Sintering</li><li>Growth and Properties of Stannite-Quaternary Cu₂ZnSnSe₄ Thin Films Prepared by Selenization of Sputtered Binary Compound Precursors</li><li>Fabrication of High Mg Containing Al-Mg Alloy Sheets by Twin Roll Strip Casting </li><li>Warm Hydroformability and Mechanical Properties of Pre- and Post- Heat Treated Al6061 Tubes </li><li>Synthesis and Characterization of Nitrogen Implanted Titanium Alloys</li><li>Control of Degradation of Biocompatible Magnesium in a Pseudo-Physiological Environment by a Ceramic Like Anodized Coating </li><li>Sonoelectroplating of Sn - Bi Solder Film from EDTA Bath</li><li>Microstructure of Rapidly Solidified Ti-46Al-2Cr-2Nb-xY Alloys </li><li>Studies on Porous Titanium Alloy Implant Manufactured by Three Dimensional Solid Freeform Fabrication System</li><li>Influence of Reaction Temperature for the Manufacturing of Al-3Ti and Al-3B Master Alloys and their Grain Refining Efficiency on a Al-7Si Alloy</li><li>Enhancing Fatigue Properties of Nanostructured Metals and Alloys </li><li>Microstructural Modification of Metallic Materials by Electromagnetic Processing and the Theoretical Interpretation </li><li>Approaches to the Design and Processing of Novel Titanium Alloys </li><li>Microstructure and Morphology of Alumina-Iron Nanocomposite Powders Produced by High Energy Mechanical Milling </li><li>Characterisation of Ti(Al,O)-Al₂O₃ Composite Powders and Thermally Sprayed Coatings</li><li>Ultrafine Grained Ti-47Al-2Cr (at%) Alloy Prepared by High Energy Mechanical Milling and Hot Isostatic Pressing</li><li>Effect of Composition on the Morphology and Hardness of Nanostructured Cu Based Composite and Alloy Powders/Granules Produced by High Energy Mechanical Milling</li><li>A Novel Process for Lowering the Cost of Titanium</li><li>Effect of Carbon Addition on the Microstructure and Properties of M3:2 High Speed Steels Processed by Powder Metallurgy </li><li>Consolidation of TiAl Powder by Thermal Spray Processes</li><li>Syntactic Foams Consolidated with Starch: Modelling for Pre-Mould Processing</li><li>Syntactic Foams Consolidated with Starch: Mixing Behaviour for Post-Mould Processing</li><li>Chemical Imaging of the Spatial Distribution and Interactions of Tannin Dispersal in Bioplastic Systems</li><li>New Strategy toward Novel Hyperbranched Phenol-Formaldehyde Resin: Synthesis, Characterization and Curing Study</li><li>The Use of Aqueous Urea as Chemical Denaturant in Processing CGM into a Biodegradable Polymer Material </li><li>Production of High Purity Alumina and Zeolite from Low-Grade Kaolin </li><li>Control of Shell Thickness in Silica-Coating of AgI Nanoparticles</li><li>Triethanolamine Molybdate, a New Polymeric Precursor for Molybdenum Nitride</li><li>Polycondensation of Urea and Boric Acid to Give Polyborate Ester, a Precursor for Boron Nitride </li><li>Processing of Mullite Whiskers from Kaolin</li><li>Joining of Ceramic Components in the Green State via LPIM</li><li>Synthesis and Characterisation of Titania Nanotubes: Effect of Phase and Crystallite Size on Nanotube Formation</li><li>Highly c-Axis Oriented Al-Doped ZnO Thin Films Grown in Premixed H₂/Ar Sputtering Gas</li><li>Fabrication and Microstructure Evaluation of Oxide and Carbide Ceramic Coatings onto Heterogeneous Substrates by Solid-Vapor Reaction</li><li>Orientation Control in Multilayered Alumina Prepared Using Electrophoretic Deposition in a Strong Magnetic Field</li><li>Direct Shaping of Alumina Ceramics by Electrophoretic Deposition Using Conductive Polymer-Coated Ceramic Substrates</li><li>Transformation of Bone Origin Hydroxyapatite at Elevated Temperatures and in Selected Atmospheres</li><li>High-Frequency Induction Heating Sintering of Ultra-Fine Al₂O₃-(ZrO₂+X%mol Y₂O₃) Bioceramics</li><li>Thermal, Mechanical and Morphological Performance of BisGMA/TiO₂ Nanocomposite</li><li>Tensile Deformation and Fracture in a Bulk Nanostructured Al-5083/SiC_p Composite at Elevated Temperatures</li><li>Fabrication of Al-Si-Cu-Mg-Zn Alloy Matrix Composite Reinforced with Submicrometer Sized Al₂O₃ Particles Formed by Displacement Reaction</li><li>Environmentally Intelligent Biocomposites</li><li>Preparation and Characterization of Alumina/TZP Particulate Composites</li><li>Deformation Behaviour of Composites Reinforced with Four Different Linen Flax Yarn Structures</li><li>Fabrication and Characterization of Polypropylene/Ethylene-Octene Copolymer Blend Nanocomposites</li><li>Fabrication and Characterization of Sisal/Glass and Polypropylene Hybrid Composites</li><li>Thermal, Morphological and Dynamic Mechanical Characterization of Melt Blended PC Nanocomposites</li><li>Rheological Characterization of Jute/HDPE Composites</li><li>The Abrasive Wear of Alumina Matrix Particulate Composites at Different Environments of Work</li><li>Improving Hygrothermal Performance in Epoxy-Biofibre Composites</li><li>MWNT Polymer Nanocomposites Based on P3HT</li><li>Intercalation of Montmorillonite by Interlayer Adsorption and Complex Formation</li><li>On Feasibility of Ply-Layup Orientation in CF/Epoxy Composite Laminates Using Rayleigh Probes </li><li>Evaluation of the Mechanical Properties of Injection Moulded Hemp Fibre Reinforced Polypropylene Composites</li><li>Natural Fibre-Reinforced Thermoplastics Processed by Rotational Moulding</li><li>Numerical Study of Functionally Graded Materials</li><li>Accelerated Weathering of Modified Wood Flour Plastic Composites</li><li>Influence of Alkali Treatment on the Interfacial Bond Strength of Industrial Hemp Fibre Reinforced Epoxy Composites: Effect of Variation from the Ideal Stoicheometric Ratio of Epoxy Resin to Curing Agent</li><li>The Effects of Residual Lignin Content on Wood Fibre Reinforced Polypropylene Composites</li><li>Electrical Spectroscopy Studies of Organic/Inorganic Nano Composites</li><li>Improvement of the Red Mud Polymer-Matrix Composites by Organophillization of Red Mud</li><li>Hemp Fibre Reinforced Poly(Lactic Acid) Composites</li><li>Natural and Man-Made Cellulose Fiber Reinforced Hybrid Polypropylene Composites: Effect of Fire Retardants</li><li>Comparative Study of Copper Diffusion in Plasma Treated Low-k Dielectric Thin Film Using XPS and SIMS</li><li>Growth and Evaluation of GaN Grown on Patterned Sapphire Substrates</li><li>Characteristics Comparison between GaN Epilayers Grown on Patterned and Unpatterned Sapphire Substrate (0001)</li><li>Electrical Properties of Mn-Co-Ni Oxides Prepared at Low Temperatures</li><li>Actuation Behavior of CP Actuator Based on Polypyrrole and PVDF</li><li>A Novel Nano-Water-Purifying Material</li><li>Characterization of Quasi-Nano Crystalline Ni-Zn Ferrite Powders Prepared by Self-Propagating High Temperature Synthesis</li><li>Durability and Performance of Indigenous Amorphous Silica in Advanced Cementitious Systems</li></ul>