Eco-Materials Processing & Design VI

Electrochemical Characteristics of Silicon-Doped Tin Oxide Thin Films for Application of Lithium Secondary Micro-Battery AnodeSol-Gel Derived TiO2 Coating for Chemical Protection of Stainless SteelGas Sensing Characteristics of ZnO-doped SnO2 Sensors for Simulants of the Chemical AgentsEffect of Hydrogen Peroxide on the Photocatalytic Decomposition of 4-Nitrophenol over TiO2/Cr-Ti- MCM-41 Catalysts in Visible Light A Rainwater Harvesting Technology by Roof Coating Using TiO2Structure and Photoluminescence Properties of ZnO:Al/Porous Silicon Thin FilmsMorphology and Microstructure of Graphitic Nanofibers Synthesized by the CVD Method Using Nickel-Copper as a CatalystSensitivity and Thermal Property of Polyaniline Sensor Characteristic of Titania Photocatalyst Fine Particles Added ZirconiaThe Preparation of Rutile TiO2 Nanopowders, Phase Transformation and Their Photocatalysed Properties Decomposition of Dioxins in Gas and Water Using Photocatalytic Silica-GelBond Cleavage of Nitrogen-Bearing Organics with "Molecular Scissors" of Titania for Aquatic RemediationPhotocatalytic Activities of Plasma Sprayed TiO2-Based CoatingsThe Preparation of Rutile TiO2 Doped with Rare Earth Metal Ions, Sulfur and Their Photocatalytic PropertiesPhotocatalytic Behavior of Na2ZrTi5O13 Sol-GelSemiconductor-Mediated Photocatalysed Degradation of Various Pesticide Derivatives and Other Priority Organic Pollutants in Aqueous SuspensionsCorrelation of Thickness with the Photocatalytic Characteristic of TiO2 Thin FilmsPhotocatalytic Performance of Plasma Sprayed TiO2-ZnFe2O4 CoatingsEffect of H2 on Microstructure and Property of Nano-Titania CoatingsPreparation and Antibacterial Effect of Doped Tetra-Needle Like ZnO WhiskersPreparation and Characterization of the Visible Light Responsive TiO2 Thin Film Photocatalysts Prepared by Magnetron Sputtering Method and Their Photocatalytic Activities for the Water Splitting Reactions Sol-Gel Synthesis and Photocatalitic Properties of Bi2MNbO7 (M = Al, Fe, In y Sm)Influence of Spraying Power and Distance on Porosity and Microhardness of Plasma Sprayed TiO2 CoatingsPreparation of Nano-Sized TiO2 Photocatalysts by a Multi-Gelation Method and Their Application to the Degradation of 2-Propanol Diluted in WaterHigh Temperature Oxidation Behavior of Ti3SiC2 in Air Fabrication of Zirconia-Hydroxyapatite Composites for Biological MaterialsThermal and Leaching Behaviors of EAF Dust-Clay SystemsIncreased High Temperature Oxidation Resistance of Ni20Cr20Fe5Nb1Y2O3 Alloy with Nano-Sized GrainsChanges in Mechanical Properties of the Wide-Gap Region Brazed with Various Brazing Temperatures and TimesPreparation of Porous Hydroxyapatite/TCP Composite Block Using a Hydrothermal Hot Pressing MethodLife Cycle Improvement Assessment of Al and Mg Diecasting ProcessesEffects of the Duration of Potentiostatic Anodizing on the Corrosion Resistance and Surface Morphology of Films Formed on Mg-Al AlloysSurface Morphology Characteristics and Improvements on Corrosion Resistance in Anodized Mg-Al Alloys as a Result of Sealing TreatmentsEffects of Post-Weld Heat Treatment on Optimum Cathodic Protection Potential of High-Strength Steel in Marine Environment ConditionsSliding Wear Behavior of Steam Generator Tube Materials in Nuclear Power PlantsCharacterization of Long-Term Oxidized Nickel Aluminide Coating by Photoluminescence SpectroscopyCharacterization of Isothermally Oxidized ZrO2-8wt.%Y2O3 Thermal Barrier Coatings by Electrochemical Impedance Spectroscopy Transmission Electron Microscopy of Isothermally Oxidized EB-PVD Thermal Barrier Coating on (Ni,Pt)Al Bondcoat Surface Characteristics of Ni-Diamond Composite Powders by Electroless Plating MethodSelf-Lubricating Composite Coating on Air Foil Bearing Shaft by Hollow Cathode Plasma JetSurface Coating of Reactive Layer with Inner Nano-Pores on Lantanium Gallium Based OxideOxidation of SiOC Composite Having Dispersoids of Mo4.8Si3C0.6 and MoSi2Corrosion of Ni-W Coatings in SO2 Atmosphere between 500 and 700 ?C Fluxless Brazing of Al6061 Alloys Using Ag-28Cu InsertPhosphate Recovery from Water as Hydroxyapatite with Activated OystershellMechanical and Thermal Properties of Silicon Nitride Hot Pressed with Adding Rare-Earth OxidesStress Concentration Regions in Ceramic Ball Heads for Total Hip Replacement Considering Trauma-Like LoadingBiodegradable Porous Nano-Hydroxyapatite/Alginate ScaffoldEffect of Plasma Spraying Gas on Microstructure and Properties of 95vol.%Al2O3?5vol.%SiC Nanocomposite CoatingsMechanical Properties of Al2O3-TiO2-SiC Nanocomposites for the Femoral Head of Hip Joint ReplacementPlasma-Sprayed Wollastonite Coatings for Biomedical ApplicationStudy of Corrosion Resistance of Anodized Ti6Al4V in SBFMechanical and Wear Properties of Silicon Nitride Added with AlNTribological Behaviors of Al2O3/SiC Nanocomposites during Dry SlidingContact Fracture Behaviors of Ti3SiC2 Synthesized by Hot Pressing Using TiCx and Si Powder MixtureSintering Effects of ZnO Nanopowders Synthesized by Solution?Combustion MethodIn-Vitro Hertzian Fatigue Properties of Glass Infiltrated Ceramic Composites for Dental CrownsProbabilistic Assessment for Failure Probability of Pipe Lines by Extreme Value DistributionAnalysis of Pipe Flow during Transportation of Magnesium Alloy MeltEffect of Sintering Atmospheres on the Microstructure Evolution of Alumina/Alumina:SiC Whisker Laminate Composites Embrittlement Fracture in a 17-4 PH Stainless Steel after Aging at 400?CHardness and Wear Resistance of Reaction Bonded SiC-B4C Composite Friction Stir Welding of Dissimilar Formed Mg Alloys (AZ31/AZ91)Fabrication and Thermoelectric Properties of N-Type Bi2Te3 Based Compounds by Spark Plasma Sintering Equilibrium and Metastable Eutectics Near the Ni3Al CompositionEffect of Skin Pass Mill Elongation on Characteristics of Surface Friction and Formability The Combustion Characteristics of Refuse Derived Fuels Using Coke/Waste TireOptimum Shear Height for Evaluation of Pb-Free Solder Ball Shear StrengthGrowth Kinetics of Intermetallic Compound and Interfacial Reactions in Pb-Free Flip Chip Solder Bump during Solid State Isothermal AgingAn Approach to Legal and Technical Norms to Manage Hazardous Materials and Wastes in Latin America Low Temperature Synthesis of Zeolite Using Ultrasonic EnergyFerroelectric Properties of Lead-Free (Bi,La)4Ti3O12 Thin Film Deposited on MTP Cell Structure for High Density FeRAM DeviceInterfacial Reaction and Shear Strength of Pb-Free Sn-3.5Ag/Ni BGA Solder Joints during ReflowFabrication of Calcium Based Fine Ceramic Materials by Recycling EggshellNitride-Related Compounds Preparation from Waste Aluminum Dross by Self-Propagating High-Temperature ProcessDual Ion Beam Sputtering for Chromium Nitride as an Alternative to Electroplated Hexavalent ChromiumThe Effect of Pozzolanics on the Recycled Aggregates by Surface Treatment Effect of RO Components on Some Properties of Pb Free Glass Frit for PDPApplication of a Cold ECAP to Magnesium Alloy (AZ31) by a Combination of Extrusion ProcessEffect of Particle Size on the Extraction of Metallic Components from Oxidized PCB in High Frequency Induction FurnaceOptical Properties of Bi2O3-ZnO-SiO2 Glass System for Eco Transparent Dielectric in PDPComparison of Transmittance of Pb-Free Transparent Dielectric Made by Screen Printer and Die CoaterAlumina/Aluminum Composite Fabricated by Freeze and Dry Process with Water-Soluble Polymer SlurryFabrication of Tubular Mullite-Alumina Porous Ceramics by Polymer-Aided ExtrusionMicrostructural Evolution of Electromagnetically Stirred Al Alloy during Isothermal Reheating in Solid-Liquid RegionEffect of Ternary Alloying Elements on Microstructure and Mechanical Property of Nb-Si Based Refractory Intermetallic AlloyInfluences of Fiber Orientation on the Progressive Damage in Glass Reinforced Hybrid CompositeCharacteristic of the Residual Strength Rate by Variation of Impact Velocities for the Leaf Spring in Ankle Foot OrthosisThe Effect of Defect Locations on the Stress Distribution and Crack Initiation in Monolithic Aluminum vs. GLARE Hybrid CompositeVibration and Impact Noise Damping Properties of Wood/Polymer Composites Processing and Microstructural Characteristics of Bi-Materials Composed of Al and Its CompositeMechanical and Electrical Properties of Y-TZP Containing TiNi-Base Intermetallic CompoundsElectrical and Thermal Properties of Carbon-Coated Porous Ceramic Fiber CompositesThe Solidification Microstructure and Carbide Formation Behaviors in the Cobalt-Based Superalloy ECY768Synthesis of SiC Ceramics from Coal GangueHeavy Metal Leaching Behavior of Glasses Containing EAF Dust Nutrients Recovery by Struvite Formation from Wastewater in a Fluidized Bed ReactorThe Effect of Sodium Tripolyphosphate on Sodium Silicate-Cement Grout Fabrication and Properties of Wall and Floor Tiles Using Waste GlassUtilization of Waste Plastics as a Fuel in the Fluidized Bed Calciner for Cement Kiln ProcessSynthesis and Characterization of Clay Brick Using Coal WastesPreparation of K2O-CaO-P2O5 Eco-Glass Fertilizers and Effect in CropsEffect of Warm Rolling on Microstructure and High Temperature Mechanical Behavior of a Nano-Structured Al-8Fe-2Mo-2V-1Zr AlloyEffects of Si Content and Cold Rolling Condition on Brazeability of Al-Mn-Zn Alloy Core Brazing Sheet Effect of Ti Addition on the Fracture Toughness of Al-Ti-B Alloys Synthesized by High-Energy Ball Milling and Spark Plasma SinteringDie-Casting Capabilities of Heat Resistant Mg-Al-Ca AlloysFormation of AlN in the N Added 18Cr Ferritic Stainless SteelsPetroleum Separation through Polymer Blend Membranes Using PervaporationSynthesis and Characterization of Nanosized ZnxMn1-xFe2O4 Powders by Glycothermal ProcessSynthesis and Characterization of Nanosized ITO Powders by Glycothermal ProcessingPreliminary Studies to Develop Environmentally Compatible Hydraulic Components Cellular Solidification Behavior of Fe-18Cr Ferritic Stainless SteelsSubstrate Bias Effects on the Structure of the Film by a Hybrid PVD and Plasma-Based Ion Implantation ProcessDevelopment of Strip Casting Process for Electrolytic Tough Pitch CopperEffect of Boron on Solidification Microstructure in a Single Crystal SuperalloyRheology Characteristics of Al-Si Alloy and Mg Alloy for Metal Foam Manufacturing Sound Absorption Properties of Al FoamCompressive Properties of Open Cell Aluminum FoamsSynthesis of Cordierite Using High Energy Ball Milling Brazing Al2O3 to Kovar Alloy with Ni/Ti/Ni Interlayer and Dramatic Increasing of Joint Strength after Thermal CyclesEffect of Operating Temperature on Characteristics of Single-Walled Carbon Nanotubes Gas SensorMicromechanical Mean-Field Analysis for Stress-Strain Curve of Lotus-Type Porous IronPreparation and Properties of Carbon Nanofiber/Polyimide Composite FilmsThermal Stability and Mechanical Properties of Hydrogenated Zr-Ni-Nb-Co Amorphous AlloyFabrication of Silicon Nitride Ceramics with Electrical ConductivityMicrowave Dielectric Properties of LTCC Materials Consisting of BaO-TiO2-SiO2-Al2O3 Glass - BaNd2Ti5O14 Ceramic CompositesRemoval of Cu++ Ions from Aqueous Cu-EDTA Solution Using ZnO NanopowderReactive Sputter Deposition of WCx Films for Replacing Hexavalent ChromiumCharacterization of Iron and Its Nitride Nanoparticles Prepared by CVC Process without Using a ChillerSynthesis of Heterogeneous ?-SiC Nano-Particles and Nano-Whisker from TEOS/SiO2 Bead/PMMA Ternary XerogelEffect of Oxidizing Agent of Polypyrrole Layer Prepared by Vapor PolymerizationVarious Applications of Silver Nano-Particles by Ultrasonic Eco-FabricationInfluence of Heat-Treatment on the Mechanical Properties of Lotus-Type Porous Carbon Steel Fabricated by Continuous Zone Melting MethodEffect of Oxide Additives on the Aspect Ratio Control of Mullite Whiskers Synthesis of Calcium Carbonate from Calcium Chlorine Solution Using Homogeneous Precipitation MethodSynthesis of Calcium Carbonate Particles Modified by Coating with Nickel Precursor Influence of the Electromagnetic Stirring on Globularization of Primary Solid Phase in Solid-Liquid RegionThermoelectric Properties of Co1-xNbxSb3 Prepared by Induction MeltingElectrochemical Characteristics of Si/Mo Multilayer Anode for Microbattery in MEMSCharacteristics of SnOx-Coated Lithium Manganese Oxide Thin Film for MEMS Power SystemCharacteristics of Polymer Composite Electrolyte for MEMS Power System Effect of PVP Addition on Microstructure of SrZrO3 Thin Films on Bi(2223) TapesEffect of Solvent Extraction on Removal of Heavy Metal Ions Using Lignocellulosic FiberSound Absorbing Properties of Foamed GlassesHydriding/Dehydriding Behavior of Mg-Ni SystemsHydrogenation Properties of Mg-TiNi Hydrogen Storage Composites MaterialsElectrical and Electrochemical Properties of Poly(P-Phenylene)-Based Carbon for Lithium Rechargeable BatteriesElectrochemical Characteristics of Li/S Secondary Battery with (PEO)6LiBF4-Al2O3 Composite Polymer Electrolyte Prepared by Ball MillingEffects of MWNT and GNF on the Performance of Sulfur Electrode for Li/S BatteryThermoelectric Properties of Co1-xNbxSb3 Prepared by Induction MeltingCharge/Discharge Characteristics of SnO2 Electrodes for Lithium Polymer BatteriesEffect of Organic Additives in Electrolytes for Rechargeable Lithium/Sulfur BatterySynthesis and Electrochemical Study of Zr-Doped LiNixMnyCo(1-x?y)O2 as Cathode Material for Secondary Li-Ion BatteryTransformation Behavior and Mechanical Properties of an Equiatomic Ti-Ni Alloy with Surface Sulfide LayersThermal Sulfidation Behavior of Ti-Ni AlloysMicrostructure and Electrical Properties of R.F. Magnetron Sputtering Derived PZT Thin Films Deposited on PbO Buffer LayerSelf-Discharge Behavior of Lithium/Sulfur Battery Using Aluminum Current CollectorDischarge-Charge Property of Lithium/PEO/Sulfur Battery with High Sulfur Content Ionic Conductivity of Sodium Ion with NaCF3SO3 Salts in Electrolyte for Sodium BatteriesMechanical Alloying and Thermoelectric Properties of CoSb3 SkutteruditeOrientation Distribution in Bi2Te3-Based Compound Prepared by Spark Plasma SinteringApplication of a Ti-Ni Alloy as a Current Collector of Positive Electrode for Lithium/Sulfur Batteries Synthesis and Thermoelectric Properties of N-Type Bi2Te2.7Se0.3 Compounds by Spark Plasma Sintering Electrochemical Properties of Primary Li/FeS2 BatteriesSynthesis of Ni-YSZ Cermet for an Electrode of High Temperature Electrolysis by High Energy Ball Milling Emissive Carbon Coating for Energy Saving