Eco-Materials Processing & Design VI

<ul><li>Electrochemical Characteristics of Silicon-Doped Tin Oxide Thin Films for Application of Lithium Secondary Micro-Battery Anode</li><li>Sol-Gel Derived TiO₂ Coating for Chemical Protection of Stainless Steel</li><li>Gas Sensing Characteristics of ZnO-doped SnO₂ Sensors for Simulants of the Chemical Agents</li><li>Effect of Hydrogen Peroxide on the Photocatalytic Decomposition of 4-Nitrophenol over TiO₂/Cr-Ti- MCM-41 Catalysts in Visible Light </li><li>A Rainwater Harvesting Technology by Roof Coating Using TiO₂</li><li>Structure and Photoluminescence Properties of ZnO:Al/Porous Silicon Thin Films</li><li>Morphology and Microstructure of Graphitic Nanofibers Synthesized by the CVD Method Using Nickel-Copper as a Catalyst</li><li>Sensitivity and Thermal Property of Polyaniline Sensor </li><li>Characteristic of Titania Photocatalyst Fine Particles Added Zirconia</li><li>The Preparation of Rutile TiO₂ Nanopowders, Phase Transformation and Their Photocatalysed Properties </li><li>Decomposition of Dioxins in Gas and Water Using Photocatalytic Silica-Gel</li><li>Bond Cleavage of Nitrogen-Bearing Organics with "Molecular Scissors" of Titania for Aquatic Remediation</li><li>Photocatalytic Activities of Plasma Sprayed TiO₂-Based Coatings</li><li>The Preparation of Rutile TiO₂ Doped with Rare Earth Metal Ions, Sulfur and Their Photocatalytic Properties</li><li>Photocatalytic Behavior of Na₂ZrTi₅O₁₃ Sol-Gel</li><li>Semiconductor-Mediated Photocatalysed Degradation of Various Pesticide Derivatives and Other Priority Organic Pollutants in Aqueous Suspensions</li><li>Correlation of Thickness with the Photocatalytic Characteristic of TiO₂ Thin Films</li><li>Photocatalytic Performance of Plasma Sprayed TiO₂-ZnFe₂O₄ Coatings</li><li>Effect of H₂ on Microstructure and Property of Nano-Titania Coatings</li><li>Preparation and Antibacterial Effect of Doped Tetra-Needle Like ZnO Whiskers</li><li>Preparation and Characterization of the Visible Light Responsive TiO₂ Thin Film Photocatalysts Prepared by Magnetron Sputtering Method and Their Photocatalytic Activities for the Water Splitting Reactions </li><li>Sol-Gel Synthesis and Photocatalitic Properties of Bi₂MNbO₇ (M = Al, Fe, In y Sm)</li><li>Influence of Spraying Power and Distance on Porosity and Microhardness of Plasma Sprayed TiO₂ Coatings</li><li>Preparation of Nano-Sized TiO₂ Photocatalysts by a Multi-Gelation Method and Their Application to the Degradation of 2-Propanol Diluted in Water</li><li>High Temperature Oxidation Behavior of Ti₃SiC₂ in Air </li><li>Fabrication of Zirconia-Hydroxyapatite Composites for Biological Materials</li><li>Thermal and Leaching Behaviors of EAF Dust-Clay Systems</li><li>Increased High Temperature Oxidation Resistance of Ni20Cr20Fe5Nb1Y₂O₃ Alloy with Nano-Sized Grains</li><li>Changes in Mechanical Properties of the Wide-Gap Region Brazed with Various Brazing Temperatures and Times</li><li>Preparation of Porous Hydroxyapatite/TCP Composite Block Using a Hydrothermal Hot Pressing Method</li><li>Life Cycle Improvement Assessment of Al and Mg Diecasting Processes</li><li>Effects of the Duration of Potentiostatic Anodizing on the Corrosion Resistance and Surface Morphology of Films Formed on Mg-Al Alloys</li><li>Surface Morphology Characteristics and Improvements on Corrosion Resistance in Anodized Mg-Al Alloys as a Result of Sealing Treatments</li><li>Effects of Post-Weld Heat Treatment on Optimum Cathodic Protection Potential of High-Strength Steel in Marine Environment Conditions</li><li>Sliding Wear Behavior of Steam Generator Tube Materials in Nuclear Power Plants</li><li>Characterization of Long-Term Oxidized Nickel Aluminide Coating by Photoluminescence Spectroscopy</li><li>Characterization of Isothermally Oxidized ZrO₂-8wt.%Y₂O₃ Thermal Barrier Coatings by Electrochemical Impedance Spectroscopy </li><li>Transmission Electron Microscopy of Isothermally Oxidized EB-PVD Thermal Barrier Coating on (Ni,Pt)Al Bondcoat </li><li>Surface Characteristics of Ni-Diamond Composite Powders by Electroless Plating Method</li><li>Self-Lubricating Composite Coating on Air Foil Bearing Shaft by Hollow Cathode Plasma Jet</li><li>Surface Coating of Reactive Layer with Inner Nano-Pores on Lantanium Gallium Based Oxide</li><li>Oxidation of SiOC Composite Having Dispersoids of Mo_4.8Si₃C_0.6 and MoSi₂</li><li>Corrosion of Ni-W Coatings in SO₂ Atmosphere between 500 and 700 degreesC </li><li>Fluxless Brazing of Al6061 Alloys Using Ag-28Cu Insert</li><li>Phosphate Recovery from Water as Hydroxyapatite with Activated Oystershell</li><li>Mechanical and Thermal Properties of Silicon Nitride Hot Pressed with Adding Rare-Earth Oxides</li><li>Stress Concentration Regions in Ceramic Ball Heads for Total Hip Replacement Considering Trauma-Like Loading</li><li>Biodegradable Porous Nano-Hydroxyapatite/Alginate Scaffold</li><li>Effect of Plasma Spraying Gas on Microstructure and Properties of 95vol.%Al₂O₃-5vol.%SiC Nanocomposite Coatings</li><li>Mechanical Properties of Al₂O₃-TiO₂-SiC Nanocomposites for the Femoral Head of Hip Joint Replacement</li><li>Plasma-Sprayed Wollastonite Coatings for Biomedical Application</li><li>Study of Corrosion Resistance of Anodized Ti6Al4V in SBF</li><li>Mechanical and Wear Properties of Silicon Nitride Added with AlN</li><li>Tribological Behaviors of Al₂O₃/SiC Nanocomposites during Dry Sliding</li><li>Contact Fracture Behaviors of Ti₃SiC₂ Synthesized by Hot Pressing Using TiC_x and Si Powder Mixture</li><li>Sintering Effects of ZnO Nanopowders Synthesized by Solution-Combustion Method</li><li>In-Vitro Hertzian Fatigue Properties of Glass Infiltrated Ceramic Composites for Dental Crowns</li><li>Probabilistic Assessment for Failure Probability of Pipe Lines by Extreme Value Distribution</li><li>Analysis of Pipe Flow during Transportation of Magnesium Alloy Melt</li><li>Effect of Sintering Atmospheres on the Microstructure Evolution of Alumina/Alumina:SiC Whisker Laminate Composites </li><li>Embrittlement Fracture in a 17-4 PH Stainless Steel after Aging at 400 degreesC</li><li>Hardness and Wear Resistance of Reaction Bonded SiC-B₄C Composite </li><li>Friction Stir Welding of Dissimilar Formed Mg Alloys (AZ31/AZ91)</li><li>Fabrication and Thermoelectric Properties of N-Type Bi₂Te₃ Based Compounds by Spark Plasma Sintering </li><li>Equilibrium and Metastable Eutectics Near the Ni₃Al Composition</li><li>Effect of Skin Pass Mill Elongation on Characteristics of Surface Friction and Formability </li><li>The Combustion Characteristics of Refuse Derived Fuels Using Coke/Waste Tire</li><li>Optimum Shear Height for Evaluation of Pb-Free Solder Ball Shear Strength</li><li>Growth Kinetics of Intermetallic Compound and Interfacial Reactions in Pb-Free Flip Chip Solder Bump during Solid State Isothermal Aging</li><li>An Approach to Legal and Technical Norms to Manage Hazardous Materials and Wastes in Latin America </li><li>Low Temperature Synthesis of Zeolite Using Ultrasonic Energy</li><li>Ferroelectric Properties of Lead-Free (Bi,La)₄Ti₃O₁₂ Thin Film Deposited on MTP Cell Structure for High Density FeRAM Device</li><li>Interfacial Reaction and Shear Strength of Pb-Free Sn-3.5Ag/Ni BGA Solder Joints during Reflow</li><li>Fabrication of Calcium Based Fine Ceramic Materials by Recycling Eggshell</li><li>Nitride-Related Compounds Preparation from Waste Aluminum Dross by Self-Propagating High-Temperature Process</li><li>Dual Ion Beam Sputtering for Chromium Nitride as an Alternative to Electroplated Hexavalent Chromium</li><li>The Effect of Pozzolanics on the Recycled Aggregates by Surface Treatment </li><li>Effect of RO Components on Some Properties of Pb Free Glass Frit for PDP</li><li>Application of a Cold ECAP to Magnesium Alloy (AZ31) by a Combination of Extrusion Process</li><li>Effect of Particle Size on the Extraction of Metallic Components from Oxidized PCB in High Frequency Induction Furnace</li><li>Optical Properties of Bi₂O₃-ZnO-SiO₂ Glass System for Eco Transparent Dielectric in PDP</li><li>Comparison of Transmittance of Pb-Free Transparent Dielectric Made by Screen Printer and Die Coater</li><li>Alumina/Aluminum Composite Fabricated by Freeze and Dry Process with Water-Soluble Polymer Slurry</li><li>Fabrication of Tubular Mullite-Alumina Porous Ceramics by Polymer-Aided Extrusion</li><li>Microstructural Evolution of Electromagnetically Stirred Al Alloy during Isothermal Reheating in Solid-Liquid Region</li><li>Effect of Ternary Alloying Elements on Microstructure and Mechanical Property of Nb-Si Based Refractory Intermetallic Alloy</li><li>Influences of Fiber Orientation on the Progressive Damage in Glass Reinforced Hybrid Composite</li><li>Characteristic of the Residual Strength Rate by Variation of Impact Velocities for the Leaf Spring in Ankle Foot Orthosis</li><li>The Effect of Defect Locations on the Stress Distribution and Crack Initiation in Monolithic Aluminum vs. GLARE Hybrid Composite</li><li>Vibration and Impact Noise Damping Properties of Wood/Polymer Composites </li><li>Processing and Microstructural Characteristics of Bi-Materials Composed of Al and Its Composite</li><li>Mechanical and Electrical Properties of Y-TZP Containing TiNi-Base Intermetallic Compounds</li><li>Electrical and Thermal Properties of Carbon-Coated Porous Ceramic Fiber Composites</li><li>The Solidification Microstructure and Carbide Formation Behaviors in the Cobalt-Based Superalloy ECY768</li><li>Synthesis of SiC Ceramics from Coal Gangue</li><li>Heavy Metal Leaching Behavior of Glasses Containing EAF Dust </li><li>Nutrients Recovery by Struvite Formation from Wastewater in a Fluidized Bed Reactor</li><li>The Effect of Sodium Tripolyphosphate on Sodium Silicate-Cement Grout </li><li>Fabrication and Properties of Wall and Floor Tiles Using Waste Glass</li><li>Utilization of Waste Plastics as a Fuel in the Fluidized Bed Calciner for Cement Kiln Process</li><li>Synthesis and Characterization of Clay Brick Using Coal Wastes</li><li>Preparation of K₂O-CaO-P₂O₅ Eco-Glass Fertilizers and Effect in Crops</li><li>Effect of Warm Rolling on Microstructure and High Temperature Mechanical Behavior of a Nano-Structured Al-8Fe-2Mo-2V-1Zr Alloy</li><li>Effects of Si Content and Cold Rolling Condition on Brazeability of Al-Mn-Zn Alloy Core Brazing Sheet </li><li>Effect of Ti Addition on the Fracture Toughness of Al-Ti-B Alloys Synthesized by High-Energy Ball Milling and Spark Plasma Sintering</li><li>Die-Casting Capabilities of Heat Resistant Mg-Al-Ca Alloys</li><li>Formation of AlN in the N Added 18Cr Ferritic Stainless Steels</li><li>Petroleum Separation through Polymer Blend Membranes Using Pervaporation</li><li>Synthesis and Characterization of Nanosized Zn_xMn_1-xFe₂O₄ Powders by Glycothermal Process</li><li>Synthesis and Characterization of Nanosized ITO Powders by Glycothermal Processing</li><li>Preliminary Studies to Develop Environmentally Compatible Hydraulic Components </li><li>Cellular Solidification Behavior of Fe-18Cr Ferritic Stainless Steels</li><li>Substrate Bias Effects on the Structure of the Film by a Hybrid PVD and Plasma-Based Ion Implantation Process</li><li>Development of Strip Casting Process for Electrolytic Tough Pitch Copper</li><li>Effect of Boron on Solidification Microstructure in a Single Crystal Superalloy</li><li>Rheology Characteristics of Al-Si Alloy and Mg Alloy for Metal Foam Manufacturing </li><li>Sound Absorption Properties of Al Foam</li><li>Compressive Properties of Open Cell Aluminum Foams</li><li>Synthesis of Cordierite Using High Energy Ball Milling </li><li>Brazing Al₂O₃ to Kovar Alloy with Ni/Ti/Ni Interlayer and Dramatic Increasing of Joint Strength after Thermal Cycles</li><li>Effect of Operating Temperature on Characteristics of Single-Walled Carbon Nanotubes Gas Sensor</li><li>Micromechanical Mean-Field Analysis for Stress-Strain Curve of Lotus-Type Porous Iron</li><li>Preparation and Properties of Carbon Nanofiber/Polyimide Composite Films</li><li>Thermal Stability and Mechanical Properties of Hydrogenated Zr-Ni-Nb-Co Amorphous Alloy</li><li>Fabrication of Silicon Nitride Ceramics with Electrical Conductivity</li><li>Microwave Dielectric Properties of LTCC Materials Consisting of BaO-TiO₂-SiO₂-Al₂O₃ Glass - BaNd₂Ti₅O₁₄ Ceramic Composites</li><li>Removal of Cu⁺⁺ Ions from Aqueous Cu-EDTA Solution Using ZnO Nanopowder</li><li>Reactive Sputter Deposition of WC_x Films for Replacing Hexavalent Chromium</li><li>Characterization of Iron and Its Nitride Nanoparticles Prepared by CVC Process without Using a Chiller</li><li>Synthesis of Heterogeneous ?-SiC Nano-Particles and Nano-Whisker from TEOS/SiO₂ Bead/PMMA Ternary Xerogel</li><li>Effect of Oxidizing Agent of Polypyrrole Layer Prepared by Vapor Polymerization</li><li>Various Applications of Silver Nano-Particles by Ultrasonic Eco-Fabrication</li><li>Influence of Heat-Treatment on the Mechanical Properties of Lotus-Type Porous Carbon Steel Fabricated by Continuous Zone Melting Method</li><li>Effect of Oxide Additives on the Aspect Ratio Control of Mullite Whiskers </li><li>Synthesis of Calcium Carbonate from Calcium Chlorine Solution Using Homogeneous Precipitation Method</li><li>Synthesis of Calcium Carbonate Particles Modified by Coating with Nickel Precursor </li><li>Influence of the Electromagnetic Stirring on Globularization of Primary Solid Phase in Solid-Liquid Region</li><li>Thermoelectric Properties of Co_1-xNb_xSb₃ Prepared by Induction Melting</li><li>Electrochemical Characteristics of Si/Mo Multilayer Anode for Microbattery in MEMS</li><li>Characteristics of SnO_x-Coated Lithium Manganese Oxide Thin Film for MEMS Power System</li><li>Characteristics of Polymer Composite Electrolyte for MEMS Power System </li><li>Effect of PVP Addition on Microstructure of SrZrO₃ Thin Films on Bi(2223) Tapes</li><li>Effect of Solvent Extraction on Removal of Heavy Metal Ions Using Lignocellulosic Fiber</li><li>Sound Absorbing Properties of Foamed Glasses</li><li>Hydriding/Dehydriding Behavior of Mg-Ni Systems</li><li>Hydrogenation Properties of Mg-TiNi Hydrogen Storage Composites Materials</li><li>Electrical and Electrochemical Properties of Poly(P-Phenylene)-Based Carbon for Lithium Rechargeable Batteries</li><li>Electrochemical Characteristics of Li/S Secondary Battery with (PEO)₆LiBF₄-Al₂O₃ Composite Polymer Electrolyte Prepared by Ball Milling</li><li>Effects of MWNT and GNF on the Performance of Sulfur Electrode for Li/S Battery</li><li>Thermoelectric Properties of Co_1-xNb_xSb₃ Prepared by Induction Melting</li><li>Charge/Discharge Characteristics of SnO₂ Electrodes for Lithium Polymer Batteries</li><li>Effect of Organic Additives in Electrolytes for Rechargeable Lithium/Sulfur Battery</li><li>Synthesis and Electrochemical Study of Zr-Doped LiNi_xMn_yCo_(1-x-y)O₂ as Cathode Material for Secondary Li-Ion Battery</li><li>Transformation Behavior and Mechanical Properties of an Equiatomic Ti-Ni Alloy with Surface Sulfide Layers</li><li>Thermal Sulfidation Behavior of Ti-Ni Alloys</li><li>Microstructure and Electrical Properties of R.F. Magnetron Sputtering Derived PZT Thin Films Deposited on PbO Buffer Layer</li><li>Self-Discharge Behavior of Lithium/Sulfur Battery Using Aluminum Current Collector</li><li>Discharge-Charge Property of Lithium/PEO/Sulfur Battery with High Sulfur Content </li><li>Ionic Conductivity of Sodium Ion with NaCF₃SO₃ Salts in Electrolyte for Sodium Batteries</li><li>Mechanical Alloying and Thermoelectric Properties of CoSb₃ Skutterudite</li><li>Orientation Distribution in Bi₂Te₃-Based Compound Prepared by Spark Plasma Sintering</li><li>Application of a Ti-Ni Alloy as a Current Collector of Positive Electrode for Lithium/Sulfur Batteries </li><li>Synthesis and Thermoelectric Properties of N-Type Bi₂Te_2.7Se_0.3 Compounds by Spark Plasma Sintering </li><li>Electrochemical Properties of Primary Li/FeS₂ Batteries</li><li>Synthesis of Ni-YSZ Cermet for an Electrode of High Temperature Electrolysis by High Energy Ball Milling </li><li>Emissive Carbon Coating for Energy Saving</li></ul>