Eco-Materials Processing & Design VI

Preface
Electrochemical Characteristics of Silicon-Doped Tin Oxide Thin Films for Application of Lithium Secondary Micro-Battery Anode
Sol-Gel Derived TiO2 Coating for Chemical Protection of Stainless Steel
Gas Sensing Characteristics of ZnO-doped SnO2 Sensors for Simulants of the Chemical Agents
Effect of Hydrogen Peroxide on the Photocatalytic Decomposition of 4-Nitrophenol over TiO2/Cr-Ti- MCM-41 Catalysts in Visible Light
A Rainwater Harvesting Technology by Roof Coating Using TiO2
Structure and Photoluminescence Properties of ZnO:Al/Porous Silicon Thin Films
Morphology and Microstructure of Graphitic Nanofibers Synthesized by the CVD Method Using Nickel-Copper as a Catalyst
Sensitivity and Thermal Property of Polyaniline Sensor
Characteristic of Titania Photocatalyst Fine Particles Added Zirconia
The Preparation of Rutile TiO2 Nanopowders, Phase Transformation and Their Photocatalysed Properties
Decomposition of Dioxins in Gas and Water Using Photocatalytic Silica-Gel
Bond Cleavage of Nitrogen-Bearing Organics with "Molecular Scissors" of Titania for Aquatic Remediation
Photocatalytic Activities of Plasma Sprayed TiO2-Based Coatings
The Preparation of Rutile TiO2 Doped with Rare Earth Metal Ions, Sulfur and Their Photocatalytic Properties
Photocatalytic Behavior of Na2ZrTi5O13 Sol-Gel
Semiconductor-Mediated Photocatalysed Degradation of Various Pesticide Derivatives and Other Priority Organic Pollutants in Aqueous Suspensions
Correlation of Thickness with the Photocatalytic Characteristic of TiO2 Thin Films
Photocatalytic Performance of Plasma Sprayed TiO2-ZnFe2O4 Coatings
Effect of H2 on Microstructure and Property of Nano-Titania Coatings
Preparation and Antibacterial Effect of Doped Tetra-Needle Like ZnO Whiskers
Preparation and Characterization of the Visible Light Responsive TiO2 Thin Film Photocatalysts Prepared by Magnetron Sputtering Method and Their Photocatalytic Activities for the Water Splitting Reactions
Sol-Gel Synthesis and Photocatalitic Properties of Bi2MNbO7 (M = Al, Fe, In y Sm)
Influence of Spraying Power and Distance on Porosity and Microhardness of Plasma Sprayed TiO2 Coatings
Preparation of Nano-Sized TiO2 Photocatalysts by a Multi-Gelation Method and Their Application to the Degradation of 2-Propanol Diluted in Water
High Temperature Oxidation Behavior of Ti3SiC2 in Air
Fabrication of Zirconia-Hydroxyapatite Composites for Biological Materials
Thermal and Leaching Behaviors of EAF Dust-Clay Systems
Increased High Temperature Oxidation Resistance of Ni20Cr20Fe5Nb1Y2O3 Alloy with Nano-Sized Grains
Changes in Mechanical Properties of the Wide-Gap Region Brazed with Various Brazing Temperatures and Times
Preparation of Porous Hydroxyapatite/TCP Composite Block Using a Hydrothermal Hot Pressing Method
Life Cycle Improvement Assessment of Al and Mg Diecasting Processes
Effects of the Duration of Potentiostatic Anodizing on the Corrosion Resistance and Surface Morphology of Films Formed on Mg-Al Alloys
Surface Morphology Characteristics and Improvements on Corrosion Resistance in Anodized Mg-Al Alloys as a Result of Sealing Treatments
Effects of Post-Weld Heat Treatment on Optimum Cathodic Protection Potential of High-Strength Steel in Marine Environment Conditions
Sliding Wear Behavior of Steam Generator Tube Materials in Nuclear Power Plants
Characterization of Long-Term Oxidized Nickel Aluminide Coating by Photoluminescence Spectroscopy
Characterization of Isothermally Oxidized ZrO2-8wt.%Y2O3 Thermal Barrier Coatings by Electrochemical Impedance Spectroscopy
Transmission Electron Microscopy of Isothermally Oxidized EB-PVD Thermal Barrier Coating on (Ni,Pt)Al Bondcoat
Surface Characteristics of Ni-Diamond Composite Powders by Electroless Plating Method
Self-Lubricating Composite Coating on Air Foil Bearing Shaft by Hollow Cathode Plasma Jet
Surface Coating of Reactive Layer with Inner Nano-Pores on Lantanium Gallium Based Oxide
Oxidation of SiOC Composite Having Dispersoids of Mo4.8Si3C0.6 and MoSi2
Corrosion of Ni-W Coatings in SO2 Atmosphere between 500 and 700 degreesC
Fluxless Brazing of Al6061 Alloys Using Ag-28Cu Insert
Phosphate Recovery from Water as Hydroxyapatite with Activated Oystershell
Mechanical and Thermal Properties of Silicon Nitride Hot Pressed with Adding Rare-Earth Oxides
Stress Concentration Regions in Ceramic Ball Heads for Total Hip Replacement Considering Trauma-Like Loading
Biodegradable Porous Nano-Hydroxyapatite/Alginate Scaffold
Effect of Plasma Spraying Gas on Microstructure and Properties of 95vol.%Al2O3-5vol.%SiC Nanocomposite Coatings
Mechanical Properties of Al2O3-TiO2-SiC Nanocomposites for the Femoral Head of Hip Joint Replacement
Plasma-Sprayed Wollastonite Coatings for Biomedical Application
Study of Corrosion Resistance of Anodized Ti6Al4V in SBF
Mechanical and Wear Properties of Silicon Nitride Added with AlN
Tribological Behaviors of Al2O3/SiC Nanocomposites during Dry Sliding
Contact Fracture Behaviors of Ti3SiC2 Synthesized by Hot Pressing Using TiCx and Si Powder Mixture
Sintering Effects of ZnO Nanopowders Synthesized by Solution-Combustion Method
In-Vitro Hertzian Fatigue Properties of Glass Infiltrated Ceramic Composites for Dental Crowns
Probabilistic Assessment for Failure Probability of Pipe Lines by Extreme Value Distribution
Analysis of Pipe Flow during Transportation of Magnesium Alloy Melt
Effect of Sintering Atmospheres on the Microstructure Evolution of Alumina/Alumina:SiC Whisker Laminate Composites
Embrittlement Fracture in a 17-4 PH Stainless Steel after Aging at 400 degreesC
Hardness and Wear Resistance of Reaction Bonded SiC-B4C Composite
Friction Stir Welding of Dissimilar Formed Mg Alloys (AZ31/AZ91)
Fabrication and Thermoelectric Properties of N-Type Bi2Te3 Based Compounds by Spark Plasma Sintering
Equilibrium and Metastable Eutectics Near the Ni3Al Composition
Effect of Skin Pass Mill Elongation on Characteristics of Surface Friction and Formability
The Combustion Characteristics of Refuse Derived Fuels Using Coke/Waste Tire
Optimum Shear Height for Evaluation of Pb-Free Solder Ball Shear Strength
Growth Kinetics of Intermetallic Compound and Interfacial Reactions in Pb-Free Flip Chip Solder Bump during Solid State Isothermal Aging
An Approach to Legal and Technical Norms to Manage Hazardous Materials and Wastes in Latin America
Low Temperature Synthesis of Zeolite Using Ultrasonic Energy
Ferroelectric Properties of Lead-Free (Bi,La)4Ti3O12 Thin Film Deposited on MTP Cell Structure for High Density FeRAM Device
Interfacial Reaction and Shear Strength of Pb-Free Sn-3.5Ag/Ni BGA Solder Joints during Reflow
Fabrication of Calcium Based Fine Ceramic Materials by Recycling Eggshell
Nitride-Related Compounds Preparation from Waste Aluminum Dross by Self-Propagating High-Temperature Process
Dual Ion Beam Sputtering for Chromium Nitride as an Alternative to Electroplated Hexavalent Chromium
The Effect of Pozzolanics on the Recycled Aggregates by Surface Treatment
Effect of RO Components on Some Properties of Pb Free Glass Frit for PDP
Application of a Cold ECAP to Magnesium Alloy (AZ31) by a Combination of Extrusion Process
Effect of Particle Size on the Extraction of Metallic Components from Oxidized PCB in High Frequency Induction Furnace
Optical Properties of Bi2O3-ZnO-SiO2 Glass System for Eco Transparent Dielectric in PDP
Comparison of Transmittance of Pb-Free Transparent Dielectric Made by Screen Printer and Die Coater
Alumina/Aluminum Composite Fabricated by Freeze and Dry Process with Water-Soluble Polymer Slurry
Fabrication of Tubular Mullite-Alumina Porous Ceramics by Polymer-Aided Extrusion
Microstructural Evolution of Electromagnetically Stirred Al Alloy during Isothermal Reheating in Solid-Liquid Region
Effect of Ternary Alloying Elements on Microstructure and Mechanical Property of Nb-Si Based Refractory Intermetallic Alloy
Influences of Fiber Orientation on the Progressive Damage in Glass Reinforced Hybrid Composite
Characteristic of the Residual Strength Rate by Variation of Impact Velocities for the Leaf Spring in Ankle Foot Orthosis
The Effect of Defect Locations on the Stress Distribution and Crack Initiation in Monolithic Aluminum vs. GLARE Hybrid Composite
Vibration and Impact Noise Damping Properties of Wood/Polymer Composites
Processing and Microstructural Characteristics of Bi-Materials Composed of Al and Its Composite
Mechanical and Electrical Properties of Y-TZP Containing TiNi-Base Intermetallic Compounds
Electrical and Thermal Properties of Carbon-Coated Porous Ceramic Fiber Composites
The Solidification Microstructure and Carbide Formation Behaviors in the Cobalt-Based Superalloy ECY768
Synthesis of SiC Ceramics from Coal Gangue
Heavy Metal Leaching Behavior of Glasses Containing EAF Dust
Nutrients Recovery by Struvite Formation from Wastewater in a Fluidized Bed Reactor
The Effect of Sodium Tripolyphosphate on Sodium Silicate-Cement Grout
Fabrication and Properties of Wall and Floor Tiles Using Waste Glass
Utilization of Waste Plastics as a Fuel in the Fluidized Bed Calciner for Cement Kiln Process
Synthesis and Characterization of Clay Brick Using Coal Wastes
Preparation of K2O-CaO-P2O5 Eco-Glass Fertilizers and Effect in Crops
Effect of Warm Rolling on Microstructure and High Temperature Mechanical Behavior of a Nano-Structured Al-8Fe-2Mo-2V-1Zr Alloy
Effects of Si Content and Cold Rolling Condition on Brazeability of Al-Mn-Zn Alloy Core Brazing Sheet
Effect of Ti Addition on the Fracture Toughness of Al-Ti-B Alloys Synthesized by High-Energy Ball Milling and Spark Plasma Sintering
Die-Casting Capabilities of Heat Resistant Mg-Al-Ca Alloys
Formation of AlN in the N Added 18Cr Ferritic Stainless Steels
Petroleum Separation through Polymer Blend Membranes Using Pervaporation
Synthesis and Characterization of Nanosized ZnxMn1-xFe2O4 Powders by Glycothermal Process
Synthesis and Characterization of Nanosized ITO Powders by Glycothermal Processing
Preliminary Studies to Develop Environmentally Compatible Hydraulic Components
Cellular Solidification Behavior of Fe-18Cr Ferritic Stainless Steels
Substrate Bias Effects on the Structure of the Film by a Hybrid PVD and Plasma-Based Ion Implantation Process
Development of Strip Casting Process for Electrolytic Tough Pitch Copper
Effect of Boron on Solidification Microstructure in a Single Crystal Superalloy
Rheology Characteristics of Al-Si Alloy and Mg Alloy for Metal Foam Manufacturing
Sound Absorption Properties of Al Foam
Compressive Properties of Open Cell Aluminum Foams
Synthesis of Cordierite Using High Energy Ball Milling
Brazing Al2O3 to Kovar Alloy with Ni/Ti/Ni Interlayer and Dramatic Increasing of Joint Strength after Thermal Cycles
Effect of Operating Temperature on Characteristics of Single-Walled Carbon Nanotubes Gas Sensor
Micromechanical Mean-Field Analysis for Stress-Strain Curve of Lotus-Type Porous Iron
Preparation and Properties of Carbon Nanofiber/Polyimide Composite Films
Thermal Stability and Mechanical Properties of Hydrogenated Zr-Ni-Nb-Co Amorphous Alloy
Fabrication of Silicon Nitride Ceramics with Electrical Conductivity
Microwave Dielectric Properties of LTCC Materials Consisting of BaO-TiO2-SiO2-Al2O3 Glass - BaNd2Ti5O14 Ceramic Composites
Removal of Cu++ Ions from Aqueous Cu-EDTA Solution Using ZnO Nanopowder
Reactive Sputter Deposition of WCx Films for Replacing Hexavalent Chromium
Characterization of Iron and Its Nitride Nanoparticles Prepared by CVC Process without Using a Chiller
Synthesis of Heterogeneous ?-SiC Nano-Particles and Nano-Whisker from TEOS/SiO2 Bead/PMMA Ternary Xerogel
Effect of Oxidizing Agent of Polypyrrole Layer Prepared by Vapor Polymerization
Various Applications of Silver Nano-Particles by Ultrasonic Eco-Fabrication
Influence of Heat-Treatment on the Mechanical Properties of Lotus-Type Porous Carbon Steel Fabricated by Continuous Zone Melting Method
Effect of Oxide Additives on the Aspect Ratio Control of Mullite Whiskers
Synthesis of Calcium Carbonate from Calcium Chlorine Solution Using Homogeneous Precipitation Method
Synthesis of Calcium Carbonate Particles Modified by Coating with Nickel Precursor
Influence of the Electromagnetic Stirring on Globularization of Primary Solid Phase in Solid-Liquid Region
Thermoelectric Properties of Co1-xNbxSb3 Prepared by Induction Melting
Electrochemical Characteristics of Si/Mo Multilayer Anode for Microbattery in MEMS
Characteristics of SnOx-Coated Lithium Manganese Oxide Thin Film for MEMS Power System
Characteristics of Polymer Composite Electrolyte for MEMS Power System
Effect of PVP Addition on Microstructure of SrZrO3 Thin Films on Bi(2223) Tapes
Effect of Solvent Extraction on Removal of Heavy Metal Ions Using Lignocellulosic Fiber
Sound Absorbing Properties of Foamed Glasses
Hydriding/Dehydriding Behavior of Mg-Ni Systems
Hydrogenation Properties of Mg-TiNi Hydrogen Storage Composites Materials
Electrical and Electrochemical Properties of Poly(P-Phenylene)-Based Carbon for Lithium Rechargeable Batteries
Electrochemical Characteristics of Li/S Secondary Battery with (PEO)6LiBF4-Al2O3 Composite Polymer Electrolyte Prepared by Ball Milling
Effects of MWNT and GNF on the Performance of Sulfur Electrode for Li/S Battery
Thermoelectric Properties of Co1-xNbxSb3 Prepared by Induction Melting
Charge/Discharge Characteristics of SnO2 Electrodes for Lithium Polymer Batteries
Effect of Organic Additives in Electrolytes for Rechargeable Lithium/Sulfur Battery
Synthesis and Electrochemical Study of Zr-Doped LiNixMnyCo(1-x-y)O2 as Cathode Material for Secondary Li-Ion Battery
Transformation Behavior and Mechanical Properties of an Equiatomic Ti-Ni Alloy with Surface Sulfide Layers
Thermal Sulfidation Behavior of Ti-Ni Alloys
Microstructure and Electrical Properties of R.F. Magnetron Sputtering Derived PZT Thin Films Deposited on PbO Buffer Layer
Self-Discharge Behavior of Lithium/Sulfur Battery Using Aluminum Current Collector
Discharge-Charge Property of Lithium/PEO/Sulfur Battery with High Sulfur Content
Ionic Conductivity of Sodium Ion with NaCF3SO3 Salts in Electrolyte for Sodium Batteries
Mechanical Alloying and Thermoelectric Properties of CoSb3 Skutterudite
Orientation Distribution in Bi2Te3-Based Compound Prepared by Spark Plasma Sintering
Application of a Ti-Ni Alloy as a Current Collector of Positive Electrode for Lithium/Sulfur Batteries
Synthesis and Thermoelectric Properties of N-Type Bi2Te2.7Se0.3 Compounds by Spark Plasma Sintering
Electrochemical Properties of Primary Li/FeS2 Batteries
Synthesis of Ni-YSZ Cermet for an Electrode of High Temperature Electrolysis by High Energy Ball Milling
Emissive Carbon Coating for Energy Saving