Progresses in Fracture and Strength of Materials and Structures

Interface Strength of Low-Dimensional Nano-Components
Metal Working and Dislocation Structures
Section 1: Fatigue and Fracture
Shape Prediction of Fatigue Crack Based on a Given Stress Intensity Factor Distribution
Fatigue Damage Accumulation of Welded Bridge Member during Crack Growth Propagation with Initial Crack
Physical Models for Cleavage Fracture at Various Temperatures
Study on Fracture Mechanisms of TiAl Alloys by In Situ Tensile Tests
Dynamic Analysis of Antiplane Crack under SH-Waves in the Functionally Graded Materials
Mode III Yoffe Dynamic Crack Problem on the Interface between Dissimilar Materials
Morphology Evolutions of the Short Fatigue Crack Propagation of 1Cr18Ni9Ti Weld Metal
The Grain Size and Porosity Dependent Constitutive Modeling for Nanocrystalline Ceramics with Small Plastic Deformation
Study on Impact Fatigue Life of 42CrMo Steel with M+F Dual-Phase Structure
Thermal Shock Properties of Ternary-Boride-Based Cladding Material
Fatigue Reliability Research on RD2 Axle of Railway Freight Car
Reconstruction of the Material Probabilistic S-N Relations with Given Confidence
Study on Complete Stress-Strain Experiment and Destruction Characteristics of Rock under Lower Confining Pressure
Three-Dimensional Elastic Stress Fields of Finite Thickness Plates with Elliptical Hole
Failure Analysis of Outer Swirls in the Fuel Nozzle
A New Model of Stochastic Crack Growth under Random Loading and Reliability Analysis of Fatigue Life
An Effective Energy Criterion on Fatigue Crack Growth of Metal Materials
The Evaluation of Fretting Fatigue Behavior in Room Temperature for INCOLOY Alloy 800
Effect of High Tensile Pre-Strain on the Torsional Fatigue Properties of a Structural Steel
Failure Assessment Diagrams of Semi-Elliptical Surface Crack with Constraint Effect
Contact Damage and Strength Degradation in Nitrided Pressureless Sintered (NPS) Silicon Nitrided Ceramics
The Variation of Crack Energy Density (CED) on Creep Crack Growth
Dynamic Fracture Behavior of Magnesium Alloy
Fatigue Properties of Nanometer-Scale Copper Films
High Speed Fracture Phenomena in Dyneema Composite
Fatigue Properties of Ni-Base Superalloy in Long Life Region
Assessment of Fatigue Life for High-Temperature Pipeline Welds Using X-Ray Diffraction Technique
Effect of Contact Pressure and Cyclic Stress Amplitude on Fretting Fatigue of 45-Carbon Steel
Room Temperature Creep and its Effect on Fatigue Crack Growth in a X70 Steel with Various Microstructures
A Study on Fatigue Behavior of SM490A Steel under Low Temperature
Plastic-Factor for the Fracture Toughness Test of the SA508Cl.1a Narrow-Gap Welding Part
Fatigue Life Estimation of Leakage for Excitation and Internal Pressure in Brazed Joints
Fatigue Crack Propagation Behavior Near Fusion Line between SA508 Steel and Ni-Based Buttering Metal
Growth Pattern Study of Closed Surface Flaw under Compression
Improvement of Fatigue Strength of Stainless Steel by Using a Cavitating Jet with an Associated Water Jet in Water
The Effect of Different Material Parameter Functions in Non-Homogeneous Regions on Eigen-Functions of Crack Tip Fields
Effect of Mean Stress on Fatigue Strength of Non-Combustible Magnesium Alloy
Influence of Testing Frequency on Fatigue Crack Growth of 6061-T6 Aluminum Alloy in Hydrogen Gas Environment
Fatigue Characteristics of Vulcanized Natural Rubber for Automotive Engine Mounting
Fracture Mechanics in Design Guidance and Practice
Effect of Water Height for Modal Characteristics of the Fuel Channel and Stiffness Analysis Using Modal Test Results
Study on Life Prediction Method for Creep-Fatigue Interaction at Elevated Temperature
The Fatigue Life Prediction of Multidirectional Laminated Composites
Effect of Shot Strip Interval and Shot Times on Laser Shot Peen-Forming with Repetition Laser Pulse
Isothermal LCF Behaviors of a NiCrAlYSi Coated Columnar-Grained Directionally Solidified Nickel Base Superalloy
Fatigue Property for the Powder Metallurgy Beryllium-Aluminum Composite Materials
Tearing Energy for Crack Growth at the Bonds of Cylindrical Rubber Bushes Subjected to Axial Shear
The Effect of Hybrid Surface Modification; Combination of Fine Particle Bombardment Treatment and Nitriding, on Fatigue Properties of Steel
Characteristics and Mechanism of High pH Stress Corrosion Cracking of Pipeline Steel X70
Stress Corrosion Cracking of Pipeline Steel in Soil Environments of Eastern China
Influence of Loading Frequency on Fatigue Behavior of High Strength Steel
A Crack in an Electrode Layer between Two Dissimilar Piezoelectric Materials
Investigations on Fatigue Properties of Die Cast Magnesium Alloy AZ91HP at Very High Cycles
An Experimental Investigation of Interface Fracture Characteristic of APS Thermal Barrier Coating System under Bending at 1000 degreesC
Fatigue Properties of Austenitic Stainless Steel with Circumferential Notch
Ductile Crack Propagation Characteristics in Thin Steel Tubes
Experimental Study of the Effects of Surface Defects on Rolling Contact Fatigue Behavior
The Non-Local Theory Solution of a Crack in the Functionally Graded Piezoelectric Materials Subjected to the Harmonic Anti-Plane Shear Stress Waves
Crack Problem for a Functionally Graded Orthotropic Coating-Substrate Structure
Influence of Plasma Radical Nitriding on Fatigue Properties of SCM435 Steel
Effect of Physical Property of Water on SCC Growth Rate of 316L Stainless Steels in High-Temperature Water
Influence of Deposition Bias Voltage on Fatigue Cracking Behavior of Chromium Nitride Film Deposited on Steel
The Relation of the Interlaminar Fracture Toughness and the Acoustic Emission (Ae) under the Enf Test
Fatigue Lives of a Ferritic Stainless Steel Containing Deformation Twins
Shear-Type Fatigue Crack Growth in SAE52100 Steel
Effect of Extrusion Ratio on Fatigue Properties of Hot-Extruded Magnesium Alloys
Effects of Microstructures on Strength and Fatigue Properties of Long-Term-Serviced F12 Steels
Fatigue Properties of Surface-Micromachined Al-3%Ti Thin Films
Life Evaluation of a Disk Brake of Railway Vehicles Considering Pressure Distributions at a Frictional Surface
Crack Formation of Ceramic Thin Film on Polymer Substrate
Investigation of Mechanical Stability of Thermally Aged a-c:H DLC Films with Different Precursor Gases
Thermal Fatigue Properties of the Fin in the Boilers
Distributions of ?' Martensitic Phase Transformed on Fracture Surfaces of SUS 304 Stainless Steel Having Through- and Part-Through-Thickness Fatigue Cracks
An Analysis of the Fatigue Strength of Metals Containing Small Defects
Study on the Effect of Cl- Concentration on the Corrosion Fatigue Damage in a Rolled AZ31B Magnesium Alloy by Acoustic Emission
The Method to Determine the Expression for Fatigue Curves
Effect of Fusing Treatment on Fatigue Strength of Thermally Sprayed Steels with Co-Based Self-Fluxing Alloy Coating
Section 2: Strength / Hardening and Toughening
Pure Bending Testing of Cr-Mo Alloy in Metal Dusting Condition
Bending Strength of Al2O3 Ceramics for Textiles Machinery and Elastic Wave Characteristics by Wavelet Analysis
Study on Strengthening of the Solid Contact Alloy CuW80/Cu
Analyzing the Microstructure and Tensile Properties of an Al8Si0.35Mg Cast Alloy with Prolonged Aging
Effect of Solution Treatment Temperature on Properties of an Al11Si3Cu0.35Mg Cast Alloy
Theoretical Analysis and Experimental Research on the Braced Stress of Vacuum Glazing
Young's Modulus of In Situ TiB Whiskers in Ti Metal Matrix Composites
Generalized Drucker-Prager Strength Criteria
Separation of Primary Stress in Finite Element Analysis of Pressure Vessel with the Principle of Superposition
A Proposed Thickness Distribution of Elbow Resisting Ratcheting
Study on the Strength of Jointed Rock Mass
Effects of Chemical Compositions of the Submerged Arc Welding Wires on Impact Toughness of the Weld Metals for the Pipeline Steel
Stress Distribution of the Composites Reinforced by Slub-Like Short Fibers
Strength and Toughness of 1.1wt% Li-Containing Al-Zn-Mg-Cu Alloys
Experimental Studies of Non-Equilibrium Grain-Boundary Segregations of Phosphorus under Low Tensile Stresses
Influence of Residual Stresses on the Interfacial Toughness Measurement by Cross-Sectional Nanoindentation
Micorstructure and Properties of 2Cr16Ni2MoN Stainless Steel
Stress Relaxation Testing For Analysis of 12Cr1MoVG Steel for Creep Strength Evaluation
Compressive Deformation Behavior of the Ferritic Oxide Dispersion Strengthened Alloys at Elevated Temperatures
Evaluation of Critical Fracture Stress in Low Alloy Steels by Finite Element Analysis of Small Punch Test
Empirical Correlation between Parameters from Small Punch and Tensile Curves of Mn-Mo-Ni Low Alloy Steels by Using Test and FE Analysis
Structural Strength and Buckling Analysis for a Steel Derrick after its Members Removed Partly
Strengthening of Cu-Ti2SnC Composites due to Microstructural Changes in the Material
Impact Toughness of Titanium Alloys with Different Strengthening Methods
Strength Calculation of the Screw Conveyor of a Decanter Centrifuge under Normal Operation Conditions
The Effect of Heat Treatment on the Properties of LF9 Alloy
Section 3: High Temperature Materials and Strength
Creep Behavior of Functionally Graded Material under In-Plane Bending Moment
Experimental Study on Residual Stress of K24 Superalloy in Laser Cladding Zone by Laser Shock Processing
Effect of Tungsten Addition on Properties of Ni-Based Alloy Sheet Prepared by EB-PVD
Influence of Oxidation to Small Punch Creep Test
Tensile Properties and Fracture Characteristics of Spray Deposited Ni3Al-Based Superalloy(IC6)
Compressive Properties of Quartzite Microcrystallite Glass Ceramics
Finite Element Study of Factor Effects on Residual Stresses and Thermal Deformation of Brazed Plate-Fin Structure
Research on Physical Significance of the Larson-Miller Parameter and its Electron Theory for Heat-Resistant Steels
Microstructure and Tensile Properties of Oxide Dispersion Strengthened Molybdenum Alloys Prepared by Different Doping Process
Crack Growth in Stainless Steel 304 under Creep-Fatigue Loading
Effect of Microstructure on Thermo-Mechanical and Isothermal Low Cycle Fatigue Failures of a Single Crystal Ni-Base Superalloy
Residual Stress Characteristics of Plasma Sprayed CoNiCrAlY Coatings by X-Ray Diffraction
The Study on Failure Behavior and Low Cycle Fatigue Life of Hot Gas Casing for Gas Turbine
Microstructure and Strength of Oxidation-Bonded Porous Silicon Nitride Ceramics
Microstructure and High Temperature Stress Rupture Properties of Ru-Containing Directionally Solidified Ni-Base Superalloy
Microstructural Evolution during Tensile Creep of a Single-Crystal Nickel-Base Superalloy
Effect of Original Microstructure on the Hot Compression Behavior of Superalloy 718
Welding Characteristic Evaluation of GMAW and Laser Cladding for the Gas Turbine 1st Blade
A Study on the Degradation of the Superalloy Inconel 718 Using Ultrasonic Technique
Characteristics of High Temperature Tensile Properties and Residual Stresses in Welded Joints of the SM570-TMCP Steel
Creep Model Based on Theta Projection and Omega Method for Predicting the Creep Behavior of Alloy
Segregation of Alloying Elements of Directionally Solidified Nickel Based Superalloy CM247LC during Creep Degradation Process
Artificial Neural Network Models for Predicting Flow Stress and Microstructure Evolution of a Hydrogenized Titanium Alloy
Fatigue Crack Growth Rate in Low ?K Range According to the Microstructure and Temperature in P122 Alloy Weldment
Quantitative Characterization of Microstructure of Thermal Deformed TA15 Titanium Alloy by EBSD
Section 4: Deformation Behavior
Uniaxial Cyclic Deformation Behaviors of 42CrMo Steel with Different Heat-Treatments
Characteristics of Strength and Deformation of Inner/Outer Local Wall Thinned Straight Pipes
Comparison of the Tensile Performance of Polymer PC and PC/ABS
Microstructure Reconstruction and Numerical Simulation of Deformation in Particle-Reinforced Composites
Deformation Behavior of Metal Rubber Material
Effect of Plastic Deformation at Room Temperature on Powder RE-Chrome-Boronizing for Medium Carbon Steel
Texture Evolution of Rolled AA3003 Alloy Sheets after Annealing
Long Wavelength Buckling of Cubic Open-Cell Foams Subjected to Uniaxial Compression
Stiffness and Thermal Conductivity of Carbon Nanotube Containing Aluminum
A Thermal Damage Model of UHMWPE
Microstructure and Tensile Properties of a Mg-Zn-Y-Zr Alloy Containing Quasicrystal Phase Processed by Equal Channel Angular Pressing
An Experimental Investigation on the Tensile Behavior of Silane-Modified MMT/Epoxy Nanocomposites
Failure Analysis of Al1060 Sheets under Double-Sided Pressure Deformation Conditions
Surface Morphological Changes in CP-Ti and SUS316L under Pure Tensile Loading and Creep
Development of Constitutive Equation for Infinite Body of Impact Problem
Tensile Behavior of Photonic Crystal Fibers
Influence of Temperature and Heat-Aged Condition on the Deformation Behavior of Rubber Material Using SHPB Technique with a Pulse Shaper
EBSD Analysis and Theoretical Prediction of Twin Orientations during Compression in Mg-3Al-1Zn
Compressive Deformation of ZK60 Magnesium Alloy at Elevated Temperature
Research on the Effect of Entry Angle and Pressure-Pad Force on Deep-Draw Thermo-Rheological Forming of a TC1 Ti-Alloy Sheet
Texture Development during Cold and Cryogenic Rolling in AA 7055 Aluminum Alloy
Dynamic Restoration Process of 7050 Aluminum Alloy during Superplastic Deformation
DRX in 7050 Aluminum Alloy during Constraint Deformation Processing at High Temperature
Compressive Deformation in Aluminum Foam Investigated Using a 2D Object Oriented Finite Element Modeling Approach
In Situ Measurement of Lattice Spacing of Ternary Ni-Ti-Nb Alloys during Hydrogen Absorption
Acoustic Emission Investigation of the Anelastic Recovery Behavior of Basal Plane Textured AZ31B as a Function of Loading Direction
Formability Analysis of the Mg-Alloy AZ31
Influence of Collision Velocity and Angle on Bullet Deformation Investigated by Reconstruction and FEM Analysis
Stress-Assisted Atomic Migration in Thin Copper Films
Deformation Behavior and Strength of Beam-To-Column Connections in Steel Portal Frame
Effect of an Electric Field on the Texture and Microstructure Evolution during Annealing of High Reduction Cold-Rolled Ni
Characteristic of Deformation of Ti-6Al-4V Alloy with Hydrogen at High Temperature
Study on Cavity Growth in Uniaxial Tension of ZK60 Magnesium Alloy
High Temperature Deformation Mechanism of 7075 Aluminum Alloy
Effect of Extruding Technology on Microstructure and Properties of Al-Li Alloy
The Influence of Aging Process on Microstructures and Properties of an Al-2.54Li-1.61Cu-1.23Mg-0.22Zr Alloy
The Influence of Pre-Annealing on Recrystallization in Heavily Cold-Rolled Nickel
Deformation and Annealing Textures of Extruded and Cold Rolled Pure Ni Single Crystals of Cube Orientation
Grain Orientation Dependence of Extended Planar Dislocation Boundaries in Cold-Rolled Polycrystalline Aluminium
Researches on Microstructures and Mechanical Properties of Extruded Mg-Zn-Zr-Y Alloy
The Effect of Heat Treatment on Microstructure and Mechanical Properties of ZK60 Alloy
Research on Hot Upsetting Deformation Behavior and Dynamic Recrystallization for AZ31
The Grinding Force Measure and Analysis on the Abrasive Belt Grinding to Magnesium Alloy
The Mechanical Property and Microstructure of Ti-4Al-2V Alloy after High Speed Shot Peening Treatment
Section 5: Friction and Wear
A Preliminary Model Accounting for the Suction Pressure in CMP Process
Tilt of Atomic Force Microscope Cantilevers: Effect on Friction Measurements
The Application of Wavelet Theory in Analysis of Surface Topography of Rifle Worn Marks
The Estimation of Barrel-Rifle Surface Wear Based on Fractal Theory
Nonlinear Dynamics of Mechanical Systems with Sectional Frictions
Friction Characteristics between Two Bodies under the Vibration Working Condition and their Applications
Study on Characteristics of Vibration Friction for Pile-Soil System
The Effect of the Microstructure on the Wear-Resistance in the Welding Deposited Metal
Capillary Adhesion between the Micro-Cantilever and the Substrate
Fracture Toughness Calculation by Movable Cellular Automata Method
Temperature Effect on the Friction Behavior of NiTi Shape Memory Alloy
Gear Abrasion-Induced System Vibration
Tribological Properties of MoS2-Coated Gray Cast Irons with Some Different Matrix Phases under the Boundary Lubricating Conditions
Wear Mechanism of Ti(C, N)-Based Cermet Cutting Tools in the Machining of Normalized Medium Carbon Steel AISI1045
Influence of Laser Micro-Mesh Texturing on the Tribological Performance in an EHL Point Contact
Reciprocating Triboligical Behavior of PA1010 Filled with ZnOw
Unequal Interval Grey Forecast of the Rate of High Temperature Abrasion of Water-Wall Tubes in Circulating Fluidized Bed Boilers
Research on Nano-Mechanical and Micro-Tribological Behaviors of C+- Implanted Silicon
A Study on Diffusion Wear of Machining Tool and Simulation by Diffusion Couple
Analysis of Fretting Problems Using a Numerical Method Based on Cauchy Singular Integral Equation
Tribological Behaviors of Bulk Metallic Glasses
A Simulation of Hydrodynamic Lubrication on Non-Glazed Surfaces under Different Sliding Velocities and Loads
Fracture Healing in the Presence of Polyethylene Wear Debris and Oestrogen Deficiency
Effect of Tempering on the Wear Characteristics of Induction-Hardened SPS5 Steel
Effect of Sliding Speed and Applied Load on the Wear Behavior of Thermally Sprayed Ni-Based Self-Flux Alloy Coating
Sliding Wear Behavior of Al/SiC Composites Fabricated by Thermal Spray Process Against Different Counterparts
Microstructure and Wear Behavior of Thermally Sprayed Fe-Based Amorphous Coating
Tribological Behavior of Phosphor Bronze against SAE52100 Steel under Different Lubricants
Effect of Stress Relief Groove Shape on Fretting Fatigue Strength
The Rolling Contact Fatigue Wear of Nylon Composites Filled with Metal-Oxides
Stress Analysis of Bonded-Interface Technique on Subsurface Damage Observations of Brittle Porcelains
Composite Fretting Wear of Aluminum Alloy
Fretting of Human Axial Cortical Bone
Tribological Behavior of Laser-Cladding Ni60 and Co-Cr-W Coatings at Elevated Temperature
Fretting Fatigue Strength and Life Estimation Considering the Fretting Wear Process
The Contact Resistance and Arc Erosion Behavior of Separable CP-Nb-Cr/Cu-Cd Electrical Contact Material
Compared Study on Laser Cladding and Plasma Spraying of Nuclear Valve Clacks
Sliding and Loosening Behavior of Thread Joints under Transverse Loading
Tribological Behaviour of Ceramic Coatings Formed on Titanium Alloy through Miro-Arc Oxidation Technique
Section 6: Simulation of Fatigue and Fracture
An Experimental Study of Excavation Damaged Zone in Anisotropic Rock
Fatigue Analysis and Life Prediction of Dumpers with Cumulative Fatigue Damage Approach and Finite Element Model
Numerical Analysis on Surface Fractures in Two-Layered Materials Subjected to Thermal Loading
Influence of Duration of Stress Wave on the Spallation Process in Inhomogeneous Material
Three Dimensional Numerical Approach to Splitting Failure of Rock Discs
Hot Spot Stress Analysis of Fatigue for Tsing Ma Bridge Critical Members under Traffic Using Finite Element Method
Study on Dynamic Behaviors of Thin Plate Structure by DBEM
Numerical Simulation on Cracks Propagation and Coalescence Process in Rock
The Influence of Stress Ratio on the Fracture Behavior of Brittle Materials
Numerical Model for Thermal Cracking of Concrete
Digital Image Based Modeling of Rock Failure at Meso-Scale
Numerical Simulation of 3-D Failure Process of Reinforced Concrete Specimen under Uniaxial Tension
Study of Interface Problems Using Finite Element Method
Stress Intensity Determination for MSD Riveted Stiffened Panels in the Presence of Corrosion
Numerical Simulation on AE Characteristics of Rock and Concrete Materials
Atomistic Finite Element Simulations on the Tensile Properties of Polyhedral Oligomeric Silsesquioxane (POSS) Reinforced Polystyrene
Atomistic Simulation of Crack Initiation at Bi-Material Interface Edges
Fracture-Damage Model for Anchored Discontinuous Jointed Rockmass and its Application
Research on Rubbing Fault in a Dual-Disc Overhung Rotor-Bearing System
Study on the Modelling of Microstructure for Polycrystalline Materials
Modelling the Behavior of Short Fatigue Cracks under Variable Amplitude Loading Using FEM
Simulation on the Short Fatigue Crack Initiation of LZ50 Axle Steel for Railway Vehicles
Numerical Simulation on Fracture Formation on Surfaces of Bi-Layered Materials
A New Numerical Method for General Failure Probability with Fuzzy Failure Region
Improved Line Sampling Reliability Analysis Method and its Application
A Fast Approximate Method for Reliability Sensitivity Based on Markov Chain Simulation
Iterative Algorithm for Structure Reliability Analysis Based on Support Vector Classification Method
Nonlinear Finite Element Analysis of Crack Tip of Rubber-Like Material
Research of Fatigue Life Simulations Applied to Large Complex Structure
Evaluation of Cracked Beam-to-Column Connection from Brittle Failure Using Finite Element Method
Using Transfer Matrix Method and Immune Algorithm to Identify Cracks in Segmented Beams
Predictive Model Based on Genetic Algorithm-Neural Network for Fatigue Performances of Pre-Corroded Aluminum Alloys
Finite-Element Simulation and Analysis on High Velocity Impact Damage of Aircraft Panel Structure
Numerical Simulation of Pressure Grouting in Soil Nail Pull-Out Tests
Numerical Simulation of Rock Stability under Dynamic Blasting Load
Numerical Simulation of Fracture Process Zone in Concrete Tension Specimen
Numerical Studies of End Effect on Crack Propagation Behavior of Brittle Specimen Containing Pre-Existing Crack under Uniaxial Compression
On the Relations between the Threshold Values of the Fatigue Crack Growth and the Cyclic Deformation Behavior of Materials
Determination of Growing Direction of Fatigue Crack
Investigating Morphology Evolution of Damage by a Cellular Automaton Modelling
Thermal Strength Evaluation of the Super Alloy Structure with Various Thermal Insulation Performances by FEM and Stress-Rupture Experiment
Monte Carlo Simulation of Stress Corrosion Cracking in Structural Metal Materials Taking Account of Surface Crack Effects
Dynamic Analysis and Three-Dimensional Finite Element Simulation of Cracked Gear
On the Stress Intensity Factor of Cracks in Residual Stress Field
Finite Element Analysis of Blower Impeller Using Cyclic Symmetry
Discrete Dislocation Dynamics Simulation on Strengths of Dislocation Network Stacks in Multilayered Structures
Fatigue Strength of Metals Containing Inclusions and Phase Inhomogeneity
Numerical Simulation on Rolling Contact Fatigue with Dent at Rolling Surface
Numerical Investigation on the Fracture Behaviors of Three-Dimensional Functionally Graded Materials
Simulation of Deformation Behavior in Aluminum Alloys Having Bimodal Structures Based on the Theory of Crystal Plasticity Considering Dislocation Distributions
The Evaluation of the Effects of the Maximum Stress Intensity Factor for Fatigue Crack Opening Behavior by Finite Element Analysis
Numerical Simulation of Thermal Stress Field of Arc-Shaped Thermal-Protection Component
Section 7: Damage Mechanics
Application of Percolation Theory to Rock Damage and Fracture
Experimental Study on Forming Underground Space in Soil Using Explosive Lining Method
Analysis of Slant Surface Cracks with Step Notches Subject to Contact Loadings by a Variational Boundary Integral Method
Effects of Joint Width on Strength, Stress-Strain Curve and Strain Localization of Rock Mass in Uniaxial Plane Strain Compression
Failure Process and Stress-Strain Curve of Plane Strain Rock Specimen with Initially Random Material Imperfections
A Statistical Analysis on the Fatigue Life Characteristics of Structural Materials
Damage Analysis of Medium Carbon Steel in Low Cycle Fatigue
A Simple Plastic-Damage Model for the Cement-Soil Admixture
Generalized Thermoelastic Responses of a Piezoelectric Rod Subjected to a Moving Heat Source
A Generalized Magneto-Thermoelastic Coupled Problem
Study of Damage Mechanism on Aluminum Alloy under Two Kinds of Stress States and FEM Simulation
Geometrically Nonlinear Deformation of Circular Sandwich Plates under Transversely Non-Uniform Temperature Rise
Investigation to the Effects of Grain Misorientation on the Performance of Short Cracks
Relationship between Fracture Mechanism and Microstructure in PLA/PCL Polymer Blends
Failure Mechanism and Mechanical Characteristics of Rockmass Containing Close Intermittent Joints under Plane Stress Condition
Nonlinear Dynamics of a Spur Gear Pair with Fault
The 3D-Crack Growth Mechanism of Brittle Material under 3D Compression
Study on Micro-Mechanism of Crack Initiation and Propagation Induced by Inclusion in Ultra-High Strength Steel
Calculation and Analysis on the Thermal Damage at High Temperature
Wavelet-Based Modal Parameter Identification through Measurements for Damage Detection
Evaluation of a Strain Energy Equivalence Principle (SEEP)-Based Continuum Damage Model
The Fracture Mechanism of As-Cast and Extruded SiCp/AZ91 Composites Fabricated by Stir Casting
Effect of Residual Stress Field in Front of the Slant Precrack Tip on Bent Fatigue Crack Propagation
Estimation of the Elastic-Plastic Fracture Behavior of Fiber Reinforced MMC According to the Change of Interfacial Characteristics
Effect of Microstructure on Small Fatigue Crack Initiation and Propagation Behavior of Ti-6Al-4V Alloy
On Probabilistic Fatigue Crack Growth Behavior under Constant Amplitude Loads
A Study on the Mechanism of Small Fatigue Crack Deflection Behavior in Alpha-Brass by Means of In Situ Atomic Force Microscopy and Crystallo-Graphic Orientation Analysis
Viscoelastic Deformation of PC/ABS Alloy
Section 8: Advanced Composite Materials
Combustion Synthesis of ZrW2O8 and Preparation of its Composite with Near Zero Thermal Expansion
Study on Reliability Design of Fiber Wound Reinforced Plastics Pressure Vessel
Development of a New Kind of Sealing Composite Material Reinforced with Aramid and Pre-Oxidized Fibers
Uniaxial and Multiaxial Cyclic Deformation Behaviors of SiCp/6061Al Alloy Composites
Study on the Fracture Energy and Fracture Toughness of the Polypropylene Fiber Reinforced Concrete
Fabrication and Properties of a Novel Anti-Radiation BaPb0.6Ce0.4O3/Al Composite
Effect of Mechanical Activation on the Morphology and Microstructure of Ni-Al-Ti-B Composite Powders
Finite Element Analysis about Effects of Particle Size on Deformation Behavior of Particle Reinforced Metal Matrix Composites
Effect of Mg-Based Spherical Quasicrystals on Microstructure and Mechanical Properties of ZA85 Alloy
Analysis and Design of Curved Laminated Composite Panels under External Pressure
Investigation on the Primary Si Phase Solidification and the Properties of SiCw/Al-18Si Composites
Effect of Interphase on Properties of Reaction Sintering Cf/SiC Composites
Influence of Extrusion Temperature on Microstructures and Mechanical Properties of Bi2O3-Coated Al18B4O33 Whisker Reinforced Al Composites
Effect of Temperature on Strain Softening Behavior of Composites with Small Misaligned Whiskers
Measurement of Delamination Strength of Thermal Barrier Coating at High Temperature by Edge-Indent Test
Analytical Solutions for Residual Stresses of Functionally Graded Medium with Inhomogeneity
Damage Monitoring of Thick CFRP Beam Using Electrical Impedance Changes
Biodegradable Composites Based on Polylactic Acid (PLA) and China Jute Fiber
Free Vibration of Composite Annular Plates Embedded with SMA Fibers in the Circumferential Direction
Formation of Cf/C Composites with SiC Concentration Gradient on the Surface by SHCLD Technique
Effects of Polarization Treatment on Mechanical Properties of Al2O3/LiTaO3 Composite Ceramics
Microstructure and Hardness Performance of a SiCp/Al Composite by Pressureless Infiltration Technique
Effect of Heat-Treatment on the Mechanical Properties of TiB2P/2024Al Composite
Influence of Nowonty Phase on the Fracture Toughness of SiC/MoSi2 Composites
Statistical Damage Detection of Laminated CFRP Beam Using Electrical Resistance Change Method
Effect of Solution Treatment on Tensile Properties of AA2024 Matrix Composite Reinforced with Magnesium Borate Whisker
Laser Processed Intermetallic Matrix Composite Coatings on Ni-Based Superalloy Substrate
Effect of ECAP on the Microstructure and Tensile Property of SiCp/AZ91 Magnesium Matrix Composite
Experimental Study on the Mechanical Properties of Metal Oxides Filled PA1010 Composites
Mechanical Alloying Influence on the Sintering of Cu-Fe Compound Powders
The Action Mechanism of Preparation of Calcium Carbonate/Titanate Composite Material by Mechano-Activated Method
Preparation of Characterization of Calcium Carbonate/Titanate Composite Material by Mechano-Activated Method
The Spectroscopy Characterization of Kaolinite-Organic Intercalation Materials
The Kinetic Analysis of Thermal Decomposition of PMMA/MMT Nanocomposites
Some Crystallographic Features of the Boron-Doped Diamond Single Crystals Synthesized by Fe-Ni-C-B System under HTHP
Fabrication and Mechanical Properties of Carbon Nanotubes/Epoxy Resin Composites Prepared by a Sonication Technique
Fracture Characteristic of Mg-Al-Zn-Al2O3 Composites
FRP Fracture Simulation Using Parallel Processing on a PC Cluster
Time-Temperature-Stress Equivalence Applied to Accelerated Characterization of Creep Behavior of Viscoelastic Polymer
Microstructure and Mechanical Properties of High Strength Al2O3p/6061Al Composites
Effects of Packing Density of Micropowders on the Compressive Strength of Cement Pastes
Influences of Micropowder Gradation on Rheological Properties of Cement-Based Composite Pastes
Mechanical Properties of SiCp/Cu Composites Prepared by Electric Conduction Sintering
Stress-Strain Response in SiC/SiC Composites under Cyclic Loading
Study on Solvent Debinding Process of Powder Injection Molded Ti(C, N)-Based Cermets
Preparation of Novel Aluminum Hybrid Composite Containing Aluminum Borate Whiskers and Carbon Nanotubes
Modeling and Testing Strain Rate-Dependent Tensile Strength of Carbon/Epoxy Composites
Diagnostic Method for Delamination Monitoring of CFRP Plate Using Kriging Interpolation Method
Monitoring of Delamination of the CFRP Beam by the Smart Structure System Using the SI-F Method
Influence of Mischmetal on Performance of Copper Based Electric Contact Materials
Stress Field of Fiber-Reinforced Composites with Graded Interphase
Microstructure Formation Mechanism of (Al2O3+TiB2+Al3Ti)/Al Composites Fabricated by Reactive Hot Pressing
An Experimental Investigation on Composites Through-The-Thickness Stitched Foam Core Sandwich Panels
Mechanical Properties of (Al2O3+Ni) and (Al2O3+Ni)/Ni Laminated Materials
Study on Process Parameters of Multi-Factor Coupling Fields CVI
Influence of Fiber Orientation and Volume Fraction on Tensile Strength and Fatigue Life of CARALL Hybrid Composite
Mechanical Properties of High Reinforcement Content TiB2p/Al Composites under Quasi-Static and Dynamic Loading
Mechanical Force Induced Grafting Effect on Strengthening HDPE/GF Composites with Maleic Anhydride
Fabrication and Dynamic Mechanical Properties Offly Ash/Epoxy Composites
Mechanical Properties of Interpenetrating Graphite/2024Al Composites Produced by Improved Squeeze Exhaust Casting
Section 9: Advanced Ceramic Materials
Flexural Strength of Superfine Grained Si2N2O-Si3N4 Composites
Thermal Physical Properties of Bulk Materials from ZrO2 Nanoparticles by Sintering Process
Synthesis and Magnetic Properties of Polymer Derived Metal/SiCN Ceramic Composites
Microstructure and Mechanical Properties of 2D Tyranno SA/SiC Composites by Hot Pressing
The Micromechanical Stress Field of Cermets Composite Containing Interfacial Arc-Microcracks
Influence of Sintering Aids on the Nitridation of Reaction Bonded Si3N4/BN Ceramics
In Situ Combustion Synthesis of h-BN-SiC High-Temperature Ceramics
BBPPAmorphous Si-B-C-N Ceramics Fabricated by High Energy Ball Milling and Hot Pressing
Internal Friction of a 2D-C/SiC Composite from 25 degreesC to 400 degreesC
Electrically Nonlinear Fracture Analysis of Piezoelectric Materials Based on CED (Crack Energy Density)
Synthesis and Properties of AlN-SiC-TiB2 Ceramics by SHS-HIP
Investigation on Large-Sized Sapphire Crystalline Perfection by X-Ray Double-Crystal Diffraction Method
In Situ Toughened ?-Sialon Ceramics Doped with Lutecia and Ytterbia
Influence of Nano-Silica on Microstructure and Mechanical Properties of SiO2/BN Ceramics
Microstructures of ZrO2 (3Y) Ceramics after Dynamic Impact
Glass-Forming Ability, Interface Joint Strength and Thermal Properties of Sealing Glasses for SOFC
Influence of 3Y-TZP on Microstructure and Mechanical Properties of Al2O3-Based Composites
Effect of Electromechanical Loadings on Fracture Strength of Piezoelectric Ceramics
Effects of Notch Size on Strength Distribution of Ceramic Components
Effects of Particle Distribution on the Residual Thermal Stresses of (W,Ti)C/SiC/Al2O3 Ceramic Composite
Bi-Axial Flexure Strength, Weibull Modulus and Fracture Mode of Alumina Glass-Infiltrated Core/Veneer Ceramic Composites
Fabrication and Microstructure of SrBi2Ta2O9 Ceramic
Mechanical Properties of ZrB2-Based Ceramics Reinforced by Nano-SiC Whiskers
Analysis of a Thin Electrode Layer between Two Dissimilar Piezoelectric Solids
Effect of Sintering Process on Fabrication of Porous Si3N4/SiC Composites
Microhardness and Machinability of Fluorphlogopite-Mullite Glass-Ceramics
Tribology of Titanium Boride Sliding against Silicon Carbide at Elevated Temperatures
The Group Velocity Change in the Unidirectional Composite Materials
Section 10: New Structural Metal Materials
Effects of Preparation Processing on Mechanical Properties of TiAl Intermetallic
Influence of Y and Ba on Microstructure and Mechanical Properties of AZ91 Magnesium Alloys
Research on Weldability for Dual-Phase Steels Using Servo Gun Spot Welding System
Effect of Annealing Temperature on Microstructure and Properties of Surface Nanocrystalline Structure in Low Carbon Steel Specimen
Ageing Processes of Li-Containing Al-Zn-Mg-Cu Alloys
Microstructural Evolution of Inconel 690 Alloy for Steam Generator Tubes
Study on Pressure Variations in the Mold of Magnesium Alloy Die Castings
High Dense Compressive Residual Stress Produced in Laser Shock Processing on Ti6Al4V Alloys
Study on High Performance Warm Compacted Fe-2Ni-2Cu-1Mo-1C Powder Metallurgy Materials
Nickel Silicides Synthesized by High Energy Ball Milling
Study on the Microstructure and Properties of Prehardened Plastic-Mould SWFT Steel for Big Section
Uniform Design and its Application in the Chemical Composition Design of Hot Work Die Steel
Microstructure of Fe-Based ODS High-Temperature Alloy Sheet Prepared by EBPVD
Effect of Hot Treatment Process on High Performance Alloy Spring Steel D701 Mechanics Properties
Investigation of the Anti-Corrosion Ceramic Coating Formed on AZ91D Magnesium Alloy by Micro-Arc Oxidation
Tensile Properties and Fatigue Strength of Ultrafine Grained Pure Copper
Precipitation Behavior of Warm-Rolled Ti-Stabilized Interstitial-Free (IF) Steel Sheets
Mechanical Properties and Microstructures of Ferritic-Rolled Ultra-Low Carbon (ULC) and Ti-Stabilized Interstitial-Free (Ti-IF) Steels
Section 11: Surface Engineering
Thermodynamic Analysis of EB-PVD Preparing SiC Coating
Investigation on Residual Stress and Crystallographic Texture of YSZ Films Prepared by EB-PVD
Simulation on Temperature Distribution in Chemical Mechanical Polishing
The Improvement of Corrosion Resistant for the Cf/Al Composites by Ni-P Coatings
HA Active Coating on Titanium Prepared by Spark Plasma Sintering
A Theoretical Model for Squeeze Film Dampers Operating with Air Entrainment
Fractal Features of Surface Morphology of Uneven Eroded Hot-Dip Galvanized Steel
Study on the Carbides and the Interface Bonding in Surfacing Welding Metal
Development of Coating Material by In Situ Reaction Synthesis
The Microstructure and Mechanical Properties of Ti/TiN Multilayer Film Synthesized by Unbalanced Magnetron Sputtering Deposition on 17-4PH Stainless Steel
Prevention of Stress Corrosion Cracking in Welded Joint of Type 304 Stainless Steel by Laser Peening
Study on Surface Metallurgy High Speed Steel Using Double Glow Plasma Technique
Preparation and Wear Resistance of TiN/Ti Deposition and Diffusion Multi-Layers by Plasma Alloying Process
Microstructure and Properties of Ni3 (Si, Ti) Intermetallic Cladding with Nb Addition
Microstructure and Properties of Low Temperature Deposit CrxN Using Unbalanced Magnetron Sputtering
Microstructure and Optical Properties of Ag/TiO2 Multilayers
Mechanical Properties of Coil Coating Evaluated with Dynamic Mechanical Analysis in Daul Cantilever
Study On the Corrosion Resistance Properties of the Ceramic Coating Obtained Through Microarc Oxidation on the Aluminium Alloy Surface
Study on Properties of Plasma Sprayed CoCrAlYCoating on TiAl Alloy Surface
Plasma Surface Alloying Process of a Fe-W-Mo-Co Surface Age Hardening High Speed Steel
Microstructure and Hardness of the Laser Surface Treated Titanium
A Special Method to Evaluate the Strong Adhesion between Brittle Coating and Ductile Substrate
Coating Influence on Residual Stress in Laser Shock Processing
Influence of Ceria on Characterization of Films Prepared by Vapor Deposition of Quasicrystal
Application of Wear Resistant Coating Technology on Coating Blade
Research on High Temperature Anti-Abrasion Protection Technology of Thermocouple Cannula
Study of New Metal/Ceramic Cored Wires
Plasma Nitriding Behavior of 1Cr18Ni9Ti Stainless Steel with Nanocrystalline Surface Induced by SMA
Thermal Vibration of Functionally Graded Circular Plates
Tribological Behavior of DLC Films by RF-PECVD at the Elevated Temperature
Friction and Wear of Lubricated Sliding Surfaces of Coated Vane and Flange in Rotary Compressor with Carbon Dioxide as a Refrigerant
CrN Coating on Magnesium Alloy AZ91 by Arc-Glow Plasma Depositing Process
Electrochemical Corrosion Behaviors of Ti2AlNb with Double Glow Plasma Surface Molybdenized
Research on Surface Low Alloy HSS by Plasma Surface Metallographic W, MO, C Alloying
Some Problems on Evaluating Elastic Modulus of APSed Ceramic Top Coat for TBCs by Indentation Method
Collaboration Tasks on Physical and Fundamental Properties of Plasma Sprayed Thermal Barrier Coatings in Japan Society of Materials Science
Mechanical Properties of 316L Stainless Steel with Nanostructure Surface Layer Induced by Surface Mechanical Attrition Treatment
Evaluation of Silica Content on Fracture Toughness of PI/SiO2 Hybrid Films
Oxidation Resistance of Ti-6Al-4V by Plasma Niobium Surface Alloying
The Processing of Anti-Rust Boronizing Layer on Steel Surface
Colossal Magnetoresistance Effects of La1-xSrxMnO3
Effect of R.F. Power on Structures and Properties of Amorphous Fluorinated Carbon Films Prepared by PSII
Molecular Dynamics Simulation of Exit Fracture in the Case of Nanometric Cutting Process
Surface Plasma Molybdenized Burn-Resistant Titanium Alloy
Study of Delamination of Thin Film Coating on Cyclic Nano-Indentation Test
Processing of Environment Protective Phosphating and its Coating Properties
Synthesis of Boron Carbonitride Films by Plasma-Based Ion Implantation
Influence of Temperature on Characteristics of TiAl Plasma Surface Niobiumizing
Finite Element Study of the Creep Size-Effect in Thin Metal Films
Surface Morphology, Crystal Orientation and Scratch Properties of Au/NiCr/Ta Multi-Layered Metallic Films
Microstructure and Resistivity of Low Temperature Deposition ITO Films on PET Substrate by Magnetron Sputtering
XPS Analysis of Silicon Oxycarbide Formed on the Surface of Rf-Sputter Deposited SiC Thin Films
Effects of Dynamic Ion Mixing Coating Condition for Fatigue Properties of Stainless Steel with TiN Film
Improvement of Oxidation Property of SUS304 by Gas Barrier Coating
Study of Boron-Doped Diamond Films by Microwave Plasma CVD Method
Influence of Ion Bombardment Process on Adhesion between CrN Coatings and Aluminum Alloy
Study on Sputtering Characteristics of Ni80Cr20 Alloy Target
Microstructure and Properties of Microarc Oxidation Ceramic Coatings on Aluminum Alloy
Mo-Si-C-N Multi-Layer Anti-Oxidation Coating on C/C Composites
Development of Diamond-Like Carbon (DLC) Coating Compatible Surface by Fine Particle Bombardment (FPB)
Section 12: Welding and Joining Technology
The Research of Integral Cu-W Electric Contact by Friction Welding
Finite Element Simulation for Residual Stresses in Weling Process
Study on Al Alloy Welded Joint Performance Deterioration under Thermal Cycling Condition
Three Dimensional Monte Carlo Simulation of Grain Growth in HAZ of Stainless Steel SUS316
Static and Dynamic Force Analysis to Large-Scale Bed of Leather Cutting Machine Tool
Study on the Process Parameters of MPAW-Based Rapid Prototyping
Deformation and Fracture Behaviors in the Freestanding APS-TBC - Effects of Process Parameters and Thermal Exposure
Distributions of Residual Stresses in Diffusion Bonding of Dissimilar Materials Intermetallics TiAl to Steel 40Cr and Effect of Interlayer
Interfacial Resistance Method for Quality Evaluation of Diffusion Bonded Joints
Strength Predication for Load-Bearing Lugs of Three-Dimensional Braided Composites
Failure Assessment Diagrams of Semi-Elliptical Surface Crack with Constraint Effect
Application of Twin Laser Beam on AZ31/A5052 Dissimilar Metals Welding
Effects of Adhesive Joint on the Failure Strength Properties of Natural Fiber Reinforced Composite
Effects of Fiber Layer on Failure Strength Properties of Adhesive - Joined Natural Fiber Reinforced Composites
Effects of Chemical Composition and Welding Process on Fracture Resistance of Type 347 Stainless Steel Weld
Effects of Resistance Welding on the Failure Strength Properties of Natural Fiber Reinforced Composite
A Study on Mechanical Properties and Durability Evaluation of Structure Adhesived and Spot Welded Joints
Computer Aided Development of the Crack-Free Laser Welding Processes
An Estimation Formula of the Stress Concentration Factor of the Butt-Welded Joint
Microstructure in the Interface between CVD Diamond Thick Film and a Ag-Cu-Ti Braze Alloy
Method of Lines to Solve 2-D Steady Temperature Field of FGM
The Effects of Energy Director Shape on Temperature Field during Ultrasonic Welding of Thermoplastic Composites
Modeling of the Temperature Field during Electron Beam Welding of Aluminum Alloy by a Pre-Defined Keyhole
Cracking Resistance of Cu-Bearing Age-Hardening Steel
Microstructure and Mechanical Properties of Simulated Heat Affected Zone of an Ultrafine Grain Steel Laser Weld
Development of Cu Brazing Sheet with Cu-P Composite Plating
Effect of Properties of Underfill Materials on Thermal Stress Relief in Lead-Free Solder Joint of Chip Size Package
Influence of Content of Ni and Ag on Microstructure and Joint Strength of Lead-Free Solder Joint with Sn-Ag-Cu-Ni-Ge
A Study of Self-Loosening and Fatigue Failure of Bolted Joint under Transverse Vibration - Influences of Property Class of Bolt and Plastic Region Tightening
A Study on Friction Stir Welding with Heating of Aluminum Alloy
Crack Growth Characteristics of Pure Copper for Smart Stress Memory Patch
Microstructure and Strength of Alumina-Metal Joint Brazed by Activated Molybdenum-Manganese Method
Thermal Fatigue Mechanism of Welding Deposited Metal of Dies Steels
Fatigue Properties of a T Type Welded Joint in a Small-Sized Single Pass Boiler Header
A Representative Stress Model Removing Weld Joint Type Dependency of S-N Curve
Fatigue Durability Analysis Based on FE Modeling Support System for Arc-Welded Members in Automobile Suspension Module
Fatigue Strength Evaluation of Load-Carrying Fillet Weldments under Out-of-Plane Bending Load Using Structural Stress Method
Evaluation of Local Tensile Properties of Bi-Metallic Weld Joints by Small Tensile and Ball Indentation Tests
Effect of Residual Stress and Weld Metal on Hysteretic Behavior of a Welded Tubular T-Joint
Assessment of a New Semi-Rigid Model in Steel Beam-to-Column Connections
Study on the Evolution of Welding Residual Stress under Tension Loading Condition
A New Strategy for In-Service Inspection of Nuclear Piping Considering Piping Failure Frequency
Joining of SiC Ceramic to High Strength Graphite Using Polysiloxane with Active Additive
Heating Characteristics of Gas Tungsten Arc Welding of Copper Thick Plates with Shielding Gas of Argon, Helium or Nitrogen
Effects of the Welding Residual Stress on the Grounding Damage Analysis of a Tanker
Section 13: Nano and Bio Materials
Synthesis and Characterization of Nanosize Molybdenum Disulfide Particles by Quick Homogeneous Precipitation Method
Preparation and Characterization of Cr2O3 Nano-Powders by Sol-Gel Method
A Study on Concrescence of Inert Nano Bioceramic Scalpel Wounds
Fabrication and Fracture Properties of Nano-Sized HAP-TZP (3Y) Bioceramic for Artificial Joints
SEM In Situ Investigation of the Effects of Ca and Sr Additions on Cracking in Cast AZ91D Alloys at Different Temperatures
Adhesion Evaluation of Titanium Oxides Films on 316L Stainless Steel Substrate
Synthesis of SnO2 Nanoparticles and Their Application on Gas Sensors
Ultrafine TiO2 Powders Prepared from Aqueous TiCl4 Solutions at Room Temperature
The Synthesis and Properties Studying of 1-D TaS2 Nanostructure
Near Full Density Nano Iron-Based Materials by Pulse Current Sintering
Lactose Modified Chitosan Scaffold for Hepatocytes Culture
Phenomenological Study of the Size Effect on Martensitic Transformation in Nanograined Powders
Comparison of Property of Dynamic Melting-Loss H13 Steel by Different Surface Treatment
Molecular Aspect of Osteoporotic Fracture Healing
Synthesis and Characterizations of Nanocubes, Monodispersed Nanocrystals and Nanospheres of Au
Preparation and Performance under Corrosive Environment of Epoxy-Nanocomposite
Synthesis of Silicon Carbide Nanowires Doped with Al2O3
Preparation of Iron Oxide Nanoparticles by a Pyrosol Technique
Biomechanical Analysis on the Foot under Normal and Abnormal Gait for Orthotics Design
Effect of pH Values on Conversion of Calcite Crystals into Calcium Phosphate Phases in Buffer Solutions
Compressive Instability of Carbon Nanotubes
Effects of Temperature and Concentration on the Nano-Sized Hydroxyapatite Whisker Prepared by Chemical Precipitation Method
Mineralization of Chitosan via Alternate Soaking
Effective Structural Parameters of Armchair Carbon Nanotubes
Studying Effects of Bias Voltage on Properties, Wettability and Platelet Adhered Behavior of DLC Films Prepared By DC-MFCVAD
Development of High Technology for Improvement of Fatigue Strength in the Intervertebral Disc Herniation's Cervical Attachment System
Evaluation of Fatigue Transverse Cracking Behavior by Cooperation of Sliding Core and Endplate in Artificial Intervertebral Disc
Stress Analysis of the Swelling and Deswelling Process of Thermo-Responsive Gel
Development of Bone-Like Composite Material and its Properties
Evaluations of Elasto-Plastic Properties and Fracture Strength Using Indentation Technique
Young's Modulus of Polysilicon Thin Film Evaluated by Finite Element Analysis
Biomechanical Analysis of the Musculoskeletal System of Human Foot by Using Passive Elastic Characteristics of Joint
Mechanical Behavior during Self-Oscillating of NIPAAm-Co-(Ru(bpy)3 Gel
The Swelling Behavior of Organoclays
Molecular Modeling of the Dimers from Cyclo-[(1R, 3S)-?-Acc-D-Phe]3
Mechanical Properties on Nanoindentation Measurements of Osteonic Lamellae in a Human Cortical Bone
Adhesion Test of Nanostructured Materials by a Novel AFM Probe
Self-Assembly Effects of Cyclic Peptide Dimers: Molecular Modeling Study
Effects of Nitrogen Implantation on the Bonding Strength of Porcelain Fused to Pure Titanium
Nanomechanical Properties of Tooth and Bone Revealed by Nanoindentation and AFM
Research and Development of Calcium Phosphate Cement
Section 14: Non-Destructive Evaluation
The Quantitative Measurement Model of ACFM Based on Swept Frequency Method
Nondestructive Evaluation of the Corroded Pipe by Time-Frequency Analysis
Wavelet Analysis of Elastic Wave for Wall Thinned Inconel 690 Tube
Nondestructive Detection of a Crack in a Triangular Cantilever Beam Based on Frequency Measurement
Model Based Online Diagnosis of Rotating Machinery Structural Damage
Correlation between Crack Growth Rate and Magnetic Memory Signal of X45 Steel
Ultrasonic Fast-Identification Expert System of the Auto Stick-Weld Defect Based on Echo-Characteristics Analyzing
Experimental Investigation on Residual Stress of Model S1100 of Crankshaft Chamfer Based on XRD
Numerical Analysis of the Measuring Errors in Quantitative Detection of Defects with Shearing Speckle Pattern Interferometry
Application of Nondestructive Detecting Technology for Geological Radar in a Large-Scale Highway Lanslide Treatment
Infrared Thermal Image Study on Failure of Granite with Hole
Damage Detection Based on the Cross Correlation Function Amplitude Vector and its Application to the ASCE Benchmark Structure
Influence of Heterogeneity on Direct Tensile Failure Process of Rocks and Associated Fractal Characteristic of AE
Damage Identification of Rock Mass with Artificial Neural Networks
Experimental Study on Crack Propagation by AE Location under Uniaxial Compression Condition
Experimental Verification and Theoretical Analysis on Felicity Effect of Acoustic Emission in Concrete
Statistical Damage Detection of Laminated CFRP Beam Using Electrical Resistance Change Method
Compaction Quality of Bitumen Mixtures Based on Ultrasonic Methods
Non-Destructive Evaluation of a Delamination in Laminates by Lamb Wave Propagation
Measurement of Acoustic Impedance of Thin Polymeric Films by Acoustic Resonant Spectroscopy
Crack Growth Mechanisms from 3-D Surface Flaw with Varied Dipping Angle under Uniaxial Compression
The Crack Growth Mechanism from 3-D Surface Flaw with Strain and Acoustic Emission Measurement under Axial Compression
Quantitative Evaluation of Cracks under Water by Microwaves
A Study on the Vibration Characteristics of Symmetry and Asymmetry Laminated Composite Materials by Using ESPI
A Study of Magnetic Charge per Unit Area of Dipole Model for the NDE
Improvement of Crack Detection Probability by Using Magnetic Camera and Image Processing
Development of Signal Processing Circuit of a Magnetic Camera for the NDT of a Paramagnetic Material
Development of Numerical Analysis Software for the NDE by Using Dipole Model
Understanding and Detecting Early Stages of SCC Initiation in Sensitized Stainless Steel by Means of Electrochemical Potential Transients
Non-Destructive Evaluation of Creep Damage of Ni-Based Superalloy Using A Scanning Blue Laser Microscope
In Situ X-Ray Stress Measurement in Electrodeposited Cu Foils under Tensile and Fatigue Loading
Analysis of High Active AE Signal by Continuous Waveform Recorder
In-Process Damage Monitoring and Stress Analysis of Thermal Spray Coating
Pressurized Water Corrosion Resistance of Carbon Steels and Their Nondestructive Characterization
An Evaluation on Corrosion Effect of Carbon Steel Using the NDT
Study on Damage Mechanism of Pipe Using Ultrasonic Wave and Acoustic Emission Technique
Measurement of Residual Stress in Water Pipe Welds Using the Hole-Drilling Technique
X-Ray Stress Measurement of Fiber Reinforced Plastics Composite Material
Study on Fault Detection and Diagnosis of the Edge-Transmission Ball Mill System
Damage Detection and Quantitative Assessment for the Cracked Beam Structures
Quantitative Estimation of the Fastening Condition of a Bolt with Using Piezoceramic (PZT) Sensors
Identification of a Defect Using the Equivalent Load Method
Influence of Observation Errors on the Identification of External Loads
Analysis of Stress Intensity Factors of a Planar Rectangular Interfacial Crack in Three Dimensional Bimaterials
Section 15: Reliability and its Application
Coupling Analysis of Fluid Film and Thermal Deformation of Sealing Members in Spiral Groove Mechanical Seal
Reliability-Based Sensitivity Design of Beam Structure with Non-Normal Distribution
ANN-Based Crack Identification in Rotor System with Multi-Crack in Shaft
The Inhibition Effect of Imidazoline and Diethylene Triamine on the Stress Corrosion Cracking of 08Cr2AlMo Steel in H2S Solution
Research on the Control Function and Control Arithmetic of Automobile Automatic Brake
A Method to Determine the Periodic Solution Based on Observed State Information and Nonlinear Analysis of Hydrodynamic Bearing-Rotor System
Study on Looseness and Impact - Rub Coupling Faults of a Vertical Dual-Disk Cantilever Rotor- Bearing System
Investigation on Levitation and Restitution Mechanisms of FPD Air Handling System
Probabilistic Cyclic Constitutions and Design Curves of 0Cr18Ni10Ti Pipe Steel
Statistical Reconstruction of the One-Dimensional Mechanical and Fatigue Strengths
A Statistical Load Weighted Average Fatigue Reliability Model for Uncertain Constant Amplitude Cyclic Load
Stability of Two-Span Rotor-Bearing System with Coupling Faults of Crack and Rub-Impact
Correction on Parameters in Torsion Vibration Model for Turbine-Generator Shafts
Stability Analysis of Cut Rock Slope with Reinforcement by Steel Cables
Effects of External Loads on the Reliability of Welded Pipe with Circumferential Crack
One Method of System Analysis Based on Some Parameters in the Underground Chambers and Application
Reliability Analysis of Railway Tunnel Construction Process within Soft and Weak Rock Mass Using the Unified Elasto-Plastic Strength Criterion
A New Concept for Assessing System Reliability Based on Probability Decomposition Method
Mechanical Reliability of a Segmented Silicon Layer on Ultra-Thin Polyimide Substrates
The Relation of the Geometric Parameters to the Maximal Principal Stress of Crankshaft
Analyzing the Strength and Stability of Large Underground Cavern Group with Different Generator Socket Construction Schemes Based on Three Dimensional Numerical Simulation
Reliability Analysis for Rotor-Stator Systems with Rubbing
First Passage of Uncertain Nonlinear MDOF Systems with Uncorrelated Failure Modes
Study on the Relationship of Hydrogen Content and Ultrasonic Propagation Properties
Influence of Different Loading Modes on Rock Tensile Strength
Fuzzy Method to Determine Probability Distribution Type of Fatigue Crack Data
Effects of Various Types of Distribution on Probabilistic Method and FAD
Experimental Study on Cracking and Integrity Stability of Xiluodu Arch Dam
The Safety Assessment of Wheelchair Occupants in Road Passenger Vehicles in a Frontal Crash: A Computer Simulation
Study on the Mechanical Bend Fatigue of Micro-Joining Soldered Joint with Lead-Free Solder
Expansion Behavior of Portland Cement Mortars under Sulfate Attack
A Study on the Static Buckling Load Estimation of the Spacer Grid in the Pressurized Water Reactor Fuel Assembly
Precision Diagnosis of Electric Multiple Units for Performance Evaluation
Optimal Placement of Multi Circular Heat Sources of HANARO Irradiation Test
Comparison of Reliability of Solder Joints by FORM and SORM
Damping Analysis of Asymmetrical Comb Accelerometer
Safety Evaluation of Pressure Piping with Weld Flaw after Long Time Service in a Water Power Plant
Research on Crack Measurement Technique in Solids Material with Digital Image Correlation (DIC)
Corrosion Behavior of Thixoformed AZ91D Magnesium Alloy in NaCl Aqueous Solution
Corrosion of 16Mn in High Pressure Carbon Dioxide Saturated NACE Solutions with Hydrogen Sulfide
Study on Reliability Analysis of Tailings Dam Stability
Risk Based Approach of In-Service Inspection and Maintenance for Petrochemical Industries
Fault Diagnosis Expert System Integrated Developing Environment Based on CLIPS
Status Monitoring and Fault Diagnosis Network System Based on UPnP
Resonance Reliability Assessment of Turbine Blade with Parametric Uncertainty
Heat-Aging Effect on the Material Properties and Useful Life Prediction of Rubber Materials
Creep Life Prediction of Waspaloy Using the Initial Strain Parameter Technique
Evaluation of Drop Impact Load for Thin Cone-Shaped Structures
Increasing Damping Ratios in a Tuned Liquid Damper Using Damping Bars
Influence of Tapered Cross Section on Fatigue Damage of Cladding Fasteners on Side Faces of Tall Buildings
Influence of Non-Gaussian Local Wind Pressures on Fatigue Damage of a Cladding Fastener on a Side Face of a Tall Building
Stress Analysis of Automotive Engine Cover under Static and Vibration Load
Impact Analysis for the Egg-Crate Structure of a Nuclear Fuel Assembly by Using FEM
Structural Response and Behavior Analyses of Steel Joint Components at Elevated Temperatures
Numerical Simulation of Deformation and Strength of Reinforced Concrete Slabs under Thermal-Mechanical Loads
Fracture Characteristics of a Hybrid Composite Joint Beam for the Tilting Car Body under Static and Fatigue Transverse Loads
Section 16: Design and Assessment of Structural Components
A Simple Spline Integral Equation Method for Circular Plates with Variable Thickness
Design Technology of ?-Shaped Seal Ring Based on Plastic Limit Analysis
Uniform Wearing Optimum Design of Extrusion Die Profile
A New Numerical Method for Axisymmetrical Bending of Circular Plates with Large Deflection
Stability Analysis on Surrounding Rockmass of Deep Tunnel Based on YAI and FD Concepts
12Finite Element Analysis of an Automobile Clutch System
Prediction of Cutting Chatter Based on Hidden Markov Model
An Integrated Neural Classifier for Stream Turbine Damage Identification Based on PSO
Nonlinear Response of Clamped Circular Plates Subjected to Transverse Excitation Load
The Application of ISDG Method on the Mechanical Property Measurement of the Welding-Line Material
Structural Strength Evaluation of a Carbody by Finite Element Analysis and Load Test
Effect of Nonlinear Shear Strength Characteristic on the Slope Stability of Super High Rockfill Dam
Wetting Effects of Rockfill on the Deformation of the Yellow River Xiaolangdi Dam
Performance Evaluations of the 3rd Rail Type Power Collector for Rubber-Tired Vehicles
Fatigue Properties of Spherical Graphite Iron Crankshafts
Calculation of Dynamic Parameters of Elastic Thin Plates under Blast Loading
Application of the Rubber Panel Structure for Railway Crossings
Application of Distance Evaluation and its Improved Algorithms in Engineering Materials Selection
On Stress Concentration Character at the Abnormal Cross-Section of the Concentric Shaft with Bigger Diameter Ratio
Analysis of Performance Characteristics in Deteriorated Subway Rolling Stock
Application of Data Mining Technology in Structural Strength Design
The Microstructures and Catalysis of Metallic Films Covering Diamond Single Crystals Synthesized from Fe-Ni-C System
Design of a Novel Micromachined Gyroscope with Compensatory Capacitance
Effects of Phase-Equilibrium Temperature and Pressure on the Thickness Decision of a Methane Hydrate Container
Fatigue Assessment for Ship Structure Acted on Non-Linear Wave Loads
Quantitative Analysis of Transmission Shafts after Torsion Fatigue Test
Wavelet Denoising of the Horizontal Vibration Signal for Identification of the Guide Rail Irregularity in Elevator
An Enhanced Pre & Post Processing Technique for the Three Dimensional Tunnel Analysis: Tunnel Modelling Wizard
Development of 3-Axis Load Cell for Measuring the Side-Force of the Rear Damper of MPV
Fatigue Design of Gas Welded Joint for the Railroad Car Body Using the Hot Spot Stress
Fatigue Design of the Railroad Car Body Member Using a Simulated Single Spot Welded Joint
Square-Structure Estimation of Bolt Fastening Conditions with Using PZT Patches
Structural Analysis of Boom System in 42m Aerial Platform Truck
Mechanical Behaviors of a Power Steering Hose Assembly during the Swaging Process
Codes and Practice of Fatigue Design for Welded Structure
Development of a Material Mixing Method for Topology Optimization of a Structure with Multiple Thermal Criteria
Optimum Design of a Dynamic Micro-Mixer for Multiphase Flow
Optimum Design of a Planar Micromanipulator Using Displacement Amplifier
Axiomatic Design of a Spatial Micromanipulator and Experimental Verification
Topology Optimization of the Inner Reinforcement for a Vehicle's Hood Using Smoothing Scheme
Optimization of Materials and Modal Analysis for Motorcycle Frame
Structural Stability Evaluation for Lifting Lug Design of Large Marine Engine by Finite Element Analysis
Static and Fatigue Analysis of a Hybrid Joint Part for the Tilting Car Body
Degradation and Failure Mechanisms of EPDM Rubbers for Automotive Radiator Hoses
Section 17: Package Materials and Related Issues of IT
Thermal Deformation Analysis of Copper Microbridges with Speckle Interferometry and Finite Element
The Mechanisms Analysis of the ACF Bonding Strengths after the High Temperature/ Humidity Environment Test
Effects of Nano Fillers on the Conductivity, Adhesion Strength and Reliability of Isotropic Conductive Adhesives (ICAs)
Microstructure and Mechanical Properties of High Densification Mo/Cu Composites
Microstructure and Properties of Environmental-Friendly Sip/4032Al Composites Used for Electronic Packaging
A Study on Failure Prediction of Airborne Electronic Equipment
Study on the Service Life of Electronic Equipment
Thermal Stress Distribution in the Corner of IC Package Structure
Thermal Stress Analysis of MCM Package Using Diamond Material
Torsional Fatigue of 63Sn-37Pb and Sn-0.7Cu Solders
Research on Creep Properties of Sn2.5Ag0.7CuXRE Lead-Free Soldered Joints for Surface Mount Technology
In Situ Thermal-Mechanical Fatigue Testing of Thin Au Lines
Theoretical Analysis of Young's Modulus and Dielectric Constant for Low-k Porous Silicon Dioxide Films
Micro/Nano Film Getters for Vacuum Maintenance of MEMS
Isothermal Aging Effects on the Microstructure, IMC and Strength of SnAgCu/Cu Solder Joint
A Comparative Study of the Solder Joint Reliability in Flip Chip Assemblies with Compliant and Rigid Substrates
Behavior of Anisotropic Conductive Joints under Hygrothermal Conditions
Interface Cracking of Plastic Electronic Package under Temperature and Humidity Environment
Shape Prediction and Reliability Design of Ball Grid Array Solder Joints
Low-Temperature Sintering of Nanoscale Silver Paste for Large-Area Joints in Power Electronics Modules
Fluctuation Mechanism of Mechanical Properties of Electroplated-Copper Thin Films Used for Three Dimensional Electronic Modules
Threshold Current Density of Electromigration Damage in Angled Polycrystalline Line
Crack Propagation Behavior at Sn37Pb-Copper Interface in Low Cycle Fatigue
Hardness and Elastic Modulus of ZnO Thin Films Fabricated by PLD Method
Section 18: Others
On Using Discrete Particle Approaches for Simulating the Perforation Process of Concrete Slab by Hard Projectile
Fractal Characterization of Sealing Surface Topography and Leakage Model of Metallic Gaskets
Effect of C/Ti Ratio and Al Powder Size on Microstructure and Performance of Al-Ti-C Grain Refiner
The Analysis to the Correlation between Cooling Medium and Cooling Result of DWTT Specimen
Effect of Spring Pressure on Basic Performance of Contacting Mechanical Seals
Finite Element Analysis of Dongjusi Railway Tunnel within Hard Rock Mass Based on the Unified Rock Mass Strength Criterion
Analysis of Valence Electron Theory on the Catalytic Mechanism of Diamond Single Crystal Growth
Exact Relationships between Eigenvalues of FGM Circular Plates Based on RPT and those of Isotropic Homogeneous Circular Plates Based on CPT
Application of Innovative GFRP Pipe Soil Nail System in Hong Kong
The Abnormal Viscosity Variation Behavior of Melt Bi
Modeling of the Effect of Excavation Mode on the Extent of the Anisotropic Zone Surrounding Deep Tunnels
Effect of Rotation to a Half-Sapce in Magneto-Thermoelasticity with Thermal Relaxations
Analysis on the Gravel Stratum Deformation by Dewatering
Study on the Electrochemical Behavior of the Weldment for SPV50Q Steel in H2S-Containing Environment
Evaluation of Stress Corrosion Cracking of Type 304L Stainless Steel in Low Concentration Sodium Hydroxide Solution with High Temperature
Research on the Non-Contact Manipulation of Biomaterials in the Stationary Sound Field of Ultrasonic Transducers
Application of Superelasticity of SMAs in Bolted End-Plate Connection
Crystal Structure of the New Compound NdFeSb3
The Deformation of Discontinuity in the DDA Method
Investigation on Purification and Degassing of TiB2/Al Composite Fabricated by LSM Method
Polyimide-Epoxy Blend for Binding Silicon Steel Sheets of Aerospace Electrical Machineries
Investigations on Hydrogen Content Change in Melt Aluminum during Casting under Adjusted Pressure
Investigation on Friction and Thermal Expansion Coefficients of Al-Sn Bearing Alloys
Steel Water Continuous Casting Slag Detection System Based on Wavelet
The Cutting Energy of Rubber Cutting by a Sharp Cutter
Study on Structure of the New Polymer-Poly (Propylene-Co-?-Butyrolactone Carbonate) with Molecular Model
Experimental Analysis of Chemical Damage of Water to Soil Structure
Research on Mechanism of Stabilized Soil Mechanics Enhanced by Con-Aid Liquid Stabilizer
The Carbonyl Group Measurement of the Membrane Copolymerized by Low-Temperature Plasma at Atmospheric Pressure of C2H2 and CO2
Influence of the Thickness and Frequency in the Infrared Hybrid Method in Consideration of Heat Conduction
Accuracy of Measurement of the Infinitesimal Deformation in Digital Image Correlation and the Intelligent Hybrid Method
Intensity of Singular Stress at the End of a Fiber under Pull-Out Force
Free-Edge Stress Singularity of Bonded Dissimilar Materials with an Interlayer
Structural Human Impact Analysis on Shooting: Experimental and Simulation
Computer-Aided Optimized Design for Multi-Alloyed Steels Specifying Hardenability Requirements
Flow-Induced Corrosion Simulation on a Plate by Finite Element Methods
"Glass Cullet" Generation Technique by Underwater Shockwave for Recycling System of Glass Bottles
Accurate Determination of Stress Intensity Factor for Interface Crack by Finite Element Method
Influence of the Various Li/Nb Ratios on Defect Structure and Photorefractive Properties of In: Eu: Fe: LiNbO3 Crystals
Grain Refinement and Eutectic Solidification Mechanism of Al-Si Hypoeutectic Alloy in Centrifugal Casting with Electromagnetic Field
Microstructure and Ferroelectric Domains of SrBi2Ta1.6Nb0.4O9