Progresses in Fracture and Strength of Materials and Structures

Interface Strength of Low-Dimensional Nano-ComponentsMetal Working and Dislocation StructuresShape Prediction of Fatigue Crack Based on a Given Stress Intensity Factor DistributionFatigue Damage Accumulation of Welded Bridge Member during Crack Growth Propagation with Initial CrackPhysical Models for Cleavage Fracture at Various TemperaturesStudy on Fracture Mechanisms of TiAl Alloys by In Situ Tensile TestsDynamic Analysis of Antiplane Crack under SH-Waves in the Functionally Graded MaterialsMode III Yoffe Dynamic Crack Problem on the Interface between Dissimilar MaterialsMorphology Evolutions of the Short Fatigue Crack Propagation of 1Cr18Ni9Ti Weld MetalThe Grain Size and Porosity Dependent Constitutive Modeling for Nanocrystalline Ceramics with Small Plastic DeformationStudy on Impact Fatigue Life of 42CrMo Steel with M+F Dual-Phase StructureThermal Shock Properties of Ternary-Boride-Based Cladding MaterialFatigue Reliability Research on RD2 Axle of Railway Freight CarReconstruction of the Material Probabilistic S-N Relations with Given ConfidenceStudy on Complete Stress-Strain Experiment and Destruction Characteristics of Rock under Lower Confining PressureThree-Dimensional Elastic Stress Fields of Finite Thickness Plates with Elliptical HoleFailure Analysis of Outer Swirls in the Fuel NozzleA New Model of Stochastic Crack Growth under Random Loading and Reliability Analysis of Fatigue LifeAn Effective Energy Criterion on Fatigue Crack Growth of Metal MaterialsThe Evaluation of Fretting Fatigue Behavior in Room Temperature for INCOLOY Alloy 800Effect of High Tensile Pre-Strain on the Torsional Fatigue Properties of a Structural SteelFailure Assessment Diagrams of Semi-Elliptical Surface Crack with Constraint EffectContact Damage and Strength Degradation in Nitrided Pressureless Sintered (NPS) Silicon Nitrided CeramicsThe Variation of Crack Energy Density (CED) on Creep Crack GrowthDynamic Fracture Behavior of Magnesium AlloyFatigue Properties of Nanometer-Scale Copper FilmsHigh Speed Fracture Phenomena in Dyneema CompositeFatigue Properties of Ni-Base Superalloy in Long Life RegionAssessment of Fatigue Life for High-Temperature Pipeline Welds Using X-Ray Diffraction TechniqueEffect of Contact Pressure and Cyclic Stress Amplitude on Fretting Fatigue of 45-Carbon SteelRoom Temperature Creep and its Effect on Fatigue Crack Growth in a X70 Steel with Various MicrostructuresA Study on Fatigue Behavior of SM490A Steel under Low TemperaturePlastic-Factor for the Fracture Toughness Test of the SA508Cl.1a Narrow-Gap Welding Part Fatigue Life Estimation of Leakage for Excitation and Internal Pressure in Brazed JointsFatigue Crack Propagation Behavior Near Fusion Line between SA508 Steel and Ni-Based Buttering MetalGrowth Pattern Study of Closed Surface Flaw under CompressionImprovement of Fatigue Strength of Stainless Steel by Using a Cavitating Jet with an Associated Water Jet in WaterThe Effect of Different Material Parameter Functions in Non-Homogeneous Regions on Eigen-Functions of Crack Tip Fields Effect of Mean Stress on Fatigue Strength of Non-Combustible Magnesium AlloyInfluence of Testing Frequency on Fatigue Crack Growth of 6061-T6 Aluminum Alloy in Hydrogen Gas EnvironmentFatigue Characteristics of Vulcanized Natural Rubber for Automotive Engine MountingFracture Mechanics in Design Guidance and PracticeEffect of Water Height for Modal Characteristics of the Fuel Channel and Stiffness Analysis Using Modal Test Results Study on Life Prediction Method for Creep-Fatigue Interaction at Elevated TemperatureThe Fatigue Life Prediction of Multidirectional Laminated CompositesEffect of Shot Strip Interval and Shot Times on Laser Shot Peen-Forming with Repetition Laser PulseIsothermal LCF Behaviors of a NiCrAlYSi Coated Columnar-Grained Directionally Solidified Nickel Base Superalloy Fatigue Property for the Powder Metallurgy Beryllium-Aluminum Composite MaterialsTearing Energy for Crack Growth at the Bonds of Cylindrical Rubber Bushes Subjected to Axial ShearThe Effect of Hybrid Surface Modification; Combination of Fine Particle Bombardment Treatment and Nitriding, on Fatigue Properties of SteelCharacteristics and Mechanism of High pH Stress Corrosion Cracking of Pipeline Steel X70 Stress Corrosion Cracking of Pipeline Steel in Soil Environments of Eastern China Influence of Loading Frequency on Fatigue Behavior of High Strength Steel A Crack in an Electrode Layer between Two Dissimilar Piezoelectric MaterialsInvestigations on Fatigue Properties of Die Cast Magnesium Alloy AZ91HP at Very High CyclesAn Experimental Investigation of Interface Fracture Characteristic of APS Thermal Barrier Coating System under Bending at 1000 ?CFatigue Properties of Austenitic Stainless Steel with Circumferential NotchDuctile Crack Propagation Characteristics in Thin Steel TubesExperimental Study of the Effects of Surface Defects on Rolling Contact Fatigue BehaviorThe Non-Local Theory Solution of a Crack in the Functionally Graded Piezoelectric Materials Subjected to the Harmonic Anti-Plane Shear Stress WavesCrack Problem for a Functionally Graded Orthotropic Coating-Substrate StructureInfluence of Plasma Radical Nitriding on Fatigue Properties of SCM435 SteelEffect of Physical Property of Water on SCC Growth Rate of 316L Stainless Steels in High-Temperature Water Influence of Deposition Bias Voltage on Fatigue Cracking Behavior of Chromium Nitride Film Deposited on SteelThe Relation of the Interlaminar Fracture Toughness and the Acoustic Emission (Ae) under the Enf TestFatigue Lives of a Ferritic Stainless Steel Containing Deformation TwinsShear-Type Fatigue Crack Growth in SAE52100 SteelEffect of Extrusion Ratio on Fatigue Properties of Hot-Extruded Magnesium AlloysEffects of Microstructures on Strength and Fatigue Properties of Long-Term-Serviced F12 SteelsFatigue Properties of Surface-Micromachined Al-3%Ti Thin FilmsLife Evaluation of a Disk Brake of Railway Vehicles Considering Pressure Distributions at a Frictional Surface Crack Formation of Ceramic Thin Film on Polymer Substrate Investigation of Mechanical Stability of Thermally Aged a-c:H DLC Films with Different Precursor GasesThermal Fatigue Properties of the Fin in the BoilersDistributions of a' Martensitic Phase Transformed on Fracture Surfaces of SUS 304 Stainless Steel Having Through- and Part-Through-Thickness Fatigue Cracks An Analysis of the Fatigue Strength of Metals Containing Small DefectsStudy on the Effect of Cl- Concentration on the Corrosion Fatigue Damage in a Rolled AZ31B Magnesium Alloy by Acoustic EmissionThe Method to Determine the Expression for Fatigue CurvesEffect of Fusing Treatment on Fatigue Strength of Thermally Sprayed Steels with Co-Based Self-Fluxing Alloy Coating Pure Bending Testing of Cr-Mo Alloy in Metal Dusting ConditionBending Strength of Al2O3 Ceramics for Textiles Machinery and Elastic Wave Characteristics by Wavelet AnalysisStudy on Strengthening of the Solid Contact Alloy CuW80/Cu Analyzing the Microstructure and Tensile Properties of an Al8Si0.35Mg Cast Alloy with Prolonged AgingEffect of Solution Treatment Temperature on Properties of an Al11Si3Cu0.35Mg Cast AlloyTheoretical Analysis and Experimental Research on the Braced Stress of Vacuum GlazingYoung?s Modulus of In Situ TiB Whiskers in Ti Metal Matrix CompositesGeneralized Drucker-Prager Strength Criteria Separation of Primary Stress in Finite Element Analysis of Pressure Vessel with the Principle of SuperpositionA Proposed Thickness Distribution of Elbow Resisting Ratcheting Study on the Strength of Jointed Rock MassEffects of Chemical Compositions of the Submerged Arc Welding Wires on Impact Toughness of the Weld Metals for the Pipeline SteelStress Distribution of the Composites Reinforced by Slub-Like Short FibersStrength and Toughness of 1.1wt% Li-Containing Al-Zn-Mg-Cu AlloysExperimental Studies of Non-Equilibrium Grain-Boundary Segregations of Phosphorus under Low Tensile StressesInfluence of Residual Stresses on the Interfacial Toughness Measurement by Cross-Sectional NanoindentationMicorstructure and Properties of 2Cr16Ni2MoN Stainless SteelStress Relaxation Testing For Analysis of 12Cr1MoVG Steel for Creep Strength EvaluationCompressive Deformation Behavior of the Ferritic Oxide Dispersion Strengthened Alloys at Elevated TemperaturesEvaluation of Critical Fracture Stress in Low Alloy Steels by Finite Element Analysis of Small Punch TestEmpirical Correlation between Parameters from Small Punch and Tensile Curves of Mn-Mo-Ni Low Alloy Steels by Using Test and FE AnalysisStructural Strength and Buckling Analysis for a Steel Derrick after its Members Removed PartlyStrengthening of Cu-Ti2SnC Composites due to Microstructural Changes in the MaterialImpact Toughness of Titanium Alloys with Different Strengthening MethodsStrength Calculation of the Screw Conveyor of a Decanter Centrifuge under Normal Operation ConditionsThe Effect of Heat Treatment on the Properties of LF9 AlloyCreep Behavior of Functionally Graded Material under In-Plane Bending Moment Experimental Study on Residual Stress of K24 Superalloy in Laser Cladding Zone by Laser Shock ProcessingEffect of Tungsten Addition on Properties of Ni-Based Alloy Sheet Prepared by EB-PVD Influence of Oxidation to Small Punch Creep TestTensile Properties and Fracture Characteristics of Spray Deposited Ni3Al-Based Superalloy(IC6)Compressive Properties of Quartzite Microcrystallite Glass CeramicsFinite Element Study of Factor Effects on Residual Stresses and Thermal Deformation of Brazed Plate-Fin StructureResearch on Physical Significance of the Larson-Miller Parameter and its Electron Theory for Heat-Resistant SteelsMicrostructure and Tensile Properties of Oxide Dispersion Strengthened Molybdenum Alloys Prepared by Different Doping ProcessCrack Growth in Stainless Steel 304 under Creep-Fatigue LoadingEffect of Microstructure on Thermo-Mechanical and Isothermal Low Cycle Fatigue Failures of a Single Crystal Ni-Base SuperalloyResidual Stress Characteristics of Plasma Sprayed CoNiCrAlY Coatings by X-Ray DiffractionThe Study on Failure Behavior and Low Cycle Fatigue Life of Hot Gas Casing for Gas TurbineMicrostructure and Strength of Oxidation-Bonded Porous Silicon Nitride CeramicsMicrostructure and High Temperature Stress Rupture Properties of Ru-Containing Directionally Solidified Ni-Base SuperalloyMicrostructural Evolution during Tensile Creep of a Single-Crystal Nickel-Base Superalloy Effect of Original Microstructure on the Hot Compression Behavior of Superalloy 718Welding Characteristic Evaluation of GMAW and Laser Cladding for the Gas Turbine 1st BladeA Study on the Degradation of the Superalloy Inconel 718 Using Ultrasonic TechniqueCharacteristics of High Temperature Tensile Properties and Residual Stresses in Welded Joints of the SM570-TMCP SteelCreep Model Based on Theta Projection and Omega Method for Predicting the Creep Behavior of AlloySegregation of Alloying Elements of Directionally Solidified Nickel Based Superalloy CM247LC during Creep Degradation ProcessArtificial Neural Network Models for Predicting Flow Stress and Microstructure Evolution of a Hydrogenized Titanium AlloyFatigue Crack Growth Rate in Low ?K Range According to the Microstructure and Temperature in P122 Alloy WeldmentQuantitative Characterization of Microstructure of Thermal Deformed TA15 Titanium Alloy by EBSDUniaxial Cyclic Deformation Behaviors of 42CrMo Steel with Different Heat-TreatmentsCharacteristics of Strength and Deformation of Inner/Outer Local Wall Thinned Straight PipesComparison of the Tensile Performance of Polymer PC and PC/ABS Microstructure Reconstruction and Numerical Simulation of Deformation in Particle-Reinforced CompositesDeformation Behavior of Metal Rubber MaterialEffect of Plastic Deformation at Room Temperature on Powder RE-Chrome-Boronizing for Medium Carbon SteelTexture Evolution of Rolled AA3003 Alloy Sheets after AnnealingLong Wavelength Buckling of Cubic Open-Cell Foams Subjected to Uniaxial Compression Stiffness and Thermal Conductivity of Carbon Nanotube Containing Aluminum A Thermal Damage Model of UHMWPEMicrostructure and Tensile Properties of a Mg-Zn-Y-Zr Alloy Containing Quasicrystal Phase Processed by Equal Channel Angular PressingAn Experimental Investigation on the Tensile Behavior of Silane-Modified MMT/Epoxy NanocompositesFailure Analysis of Al1060 Sheets under Double-Sided Pressure Deformation ConditionsSurface Morphological Changes in CP-Ti and SUS316L under Pure Tensile Loading and CreepDevelopment of Constitutive Equation for Infinite Body of Impact ProblemTensile Behavior of Photonic Crystal FibersInfluence of Temperature and Heat-Aged Condition on the Deformation Behavior of Rubber Material Using SHPB Technique with a Pulse ShaperEBSD Analysis and Theoretical Prediction of Twin Orientations during Compression in Mg-3Al-1ZnCompressive Deformation of ZK60 Magnesium Alloy at Elevated TemperatureResearch on the Effect of Entry Angle and Pressure-Pad Force on Deep-Draw Thermo-Rheological Forming of a TC1 Ti-Alloy Sheet Texture Development during Cold and Cryogenic Rolling in AA 7055 Aluminum AlloyDynamic Restoration Process of 7050 Aluminum Alloy during Superplastic Deformation DRX in 7050 Aluminum Alloy during Constraint Deformation Processing at High TemperatureCompressive Deformation in Aluminum Foam Investigated Using a 2D Object Oriented Finite Element Modeling ApproachIn Situ Measurement of Lattice Spacing of Ternary Ni-Ti-Nb Alloys during Hydrogen AbsorptionAcoustic Emission Investigation of the Anelastic Recovery Behavior of Basal Plane Textured AZ31B as a Function of Loading DirectionFormability Analysis of the Mg-Alloy AZ31Influence of Collision Velocity and Angle on Bullet Deformation Investigated by Reconstruction and FEM Analysis Stress-Assisted Atomic Migration in Thin Copper FilmsDeformation Behavior and Strength of Beam-To-Column Connections in Steel Portal FrameEffect of an Electric Field on the Texture and Microstructure Evolution during Annealing of High Reduction Cold-Rolled NiCharacteristic of Deformation of Ti-6Al-4V Alloy with Hydrogen at High TemperatureStudy on Cavity Growth in Uniaxial Tension of ZK60 Magnesium AlloyHigh Temperature Deformation Mechanism of 7075 Aluminum Alloy Effect of Extruding Technology on Microstructure and Properties of Al-Li AlloyThe Influence of Aging Process on Microstructures and Properties of an Al-2.54Li-1.61Cu-1.23Mg-0.22Zr AlloyThe Influence of Pre-Annealing on Recrystallization in Heavily Cold-Rolled Nickel Deformation and Annealing Textures of Extruded and Cold Rolled Pure Ni Single Crystals of Cube OrientationGrain Orientation Dependence of Extended Planar Dislocation Boundaries in Cold-Rolled Polycrystalline AluminiumResearches on Microstructures and Mechanical Properties of Extruded Mg-Zn-Zr-Y AlloyThe Effect of Heat Treatment on Microstructure and Mechanical Properties of ZK60 AlloyResearch on Hot Upsetting Deformation Behavior and Dynamic Recrystallization for AZ31The Grinding Force Measure and Analysis on the Abrasive Belt Grinding to Magnesium AlloyThe Mechanical Property and Microstructure of Ti-4Al-2V Alloy after High Speed Shot Peening Treatment A Preliminary Model Accounting for the Suction Pressure in CMP ProcessTilt of Atomic Force Microscope Cantilevers: Effect on Friction MeasurementsThe Application of Wavelet Theory in Analysis of Surface Topography of Rifle Worn MarksThe Estimation of Barrel-Rifle Surface Wear Based on Fractal TheoryNonlinear Dynamics of Mechanical Systems with Sectional FrictionsFriction Characteristics between Two Bodies under the Vibration Working Condition and their ApplicationsStudy on Characteristics of Vibration Friction for Pile-Soil SystemThe Effect of the Microstructure on the Wear-Resistance in the Welding Deposited MetalCapillary Adhesion between the Micro-Cantilever and the Substrate Fracture Toughness Calculation by Movable Cellular Automata MethodTemperature Effect on the Friction Behavior of NiTi Shape Memory AlloyGear Abrasion-Induced System VibrationTribological Properties of MoS2-Coated Gray Cast Irons with Some Different Matrix Phases under the Boundary Lubricating ConditionsWear Mechanism of Ti(C, N)-Based Cermet Cutting Tools in the Machining of Normalized Medium Carbon Steel AISI1045 Influence of Laser Micro-Mesh Texturing on the Tribological Performance in an EHL Point ContactReciprocating Triboligical Behavior of PA1010 Filled with ZnOwUnequal Interval Grey Forecast of the Rate of High Temperature Abrasion of Water-Wall Tubes in Circulating Fluidized Bed Boilers Research on Nano-Mechanical and Micro-Tribological Behaviors of C+- Implanted SiliconA Study on Diffusion Wear of Machining Tool and Simulation by Diffusion CoupleAnalysis of Fretting Problems Using a Numerical Method Based on Cauchy Singular Integral EquationTribological Behaviors of Bulk Metallic GlassesA Simulation of Hydrodynamic Lubrication on Non-Glazed Surfaces under Different Sliding Velocities and LoadsFracture Healing in the Presence of Polyethylene Wear Debris and Oestrogen DeficiencyEffect of Tempering on the Wear Characteristics of Induction-Hardened SPS5 SteelEffect of Sliding Speed and Applied Load on the Wear Behavior of Thermally Sprayed Ni-Based Self-Flux Alloy Coating Sliding Wear Behavior of Al/SiC Composites Fabricated by Thermal Spray Process Against Different Counterparts Microstructure and Wear Behavior of Thermally Sprayed Fe-Based Amorphous Coating Tribological Behavior of Phosphor Bronze against SAE52100 Steel under Different LubricantsEffect of Stress Relief Groove Shape on Fretting Fatigue StrengthThe Rolling Contact Fatigue Wear of Nylon Composites Filled with Metal-OxidesStress Analysis of Bonded-Interface Technique on Subsurface Damage Observations of Brittle PorcelainsComposite Fretting Wear of Aluminum AlloyFretting of Human Axial Cortical BoneTribological Behavior of Laser-Cladding Ni60 and Co-Cr-W Coatings at Elevated TemperatureFretting Fatigue Strength and Life Estimation Considering the Fretting Wear ProcessThe Contact Resistance and Arc Erosion Behavior of Separable CP-Nb-Cr/Cu-Cd Electrical Contact MaterialCompared Study on Laser Cladding and Plasma Spraying of Nuclear Valve ClacksSliding and Loosening Behavior of Thread Joints under Transverse LoadingTribological Behaviour of Ceramic Coatings Formed on Titanium Alloy through Miro-Arc Oxidation TechniqueAn Experimental Study of Excavation Damaged Zone in Anisotropic RockFatigue Analysis and Life Prediction of Dumpers with Cumulative Fatigue Damage Approach and Finite Element ModelNumerical Analysis on Surface Fractures in Two-Layered Materials Subjected to Thermal LoadingInfluence of Duration of Stress Wave on the Spallation Process in Inhomogeneous MaterialThree Dimensional Numerical Approach to Splitting Failure of Rock DiscsHot Spot Stress Analysis of Fatigue for Tsing Ma Bridge Critical Members under Traffic Using Finite Element MethodStudy on Dynamic Behaviors of Thin Plate Structure by DBEMNumerical Simulation on Cracks Propagation and Coalescence Process in RockThe Influence of Stress Ratio on the Fracture Behavior of Brittle MaterialsNumerical Model for Thermal Cracking of ConcreteDigital Image Based Modeling of Rock Failure at Meso-ScaleNumerical Simulation of 3-D Failure Process of Reinforced Concrete Specimen under Uniaxial TensionStudy of Interface Problems Using Finite Element MethodStress Intensity Determination for MSD Riveted Stiffened Panels in the Presence of CorrosionNumerical Simulation on AE Characteristics of Rock and Concrete MaterialsAtomistic Finite Element Simulations on the Tensile Properties of Polyhedral Oligomeric Silsesquioxane (POSS) Reinforced PolystyreneAtomistic Simulation of Crack Initiation at Bi-Material Interface EdgesFracture-Damage Model for Anchored Discontinuous Jointed Rockmass and its ApplicationResearch on Rubbing Fault in a Dual-Disc Overhung Rotor-Bearing SystemStudy on the Modelling of Microstructure for Polycrystalline MaterialsModelling the Behavior of Short Fatigue Cracks under Variable Amplitude Loading Using FEMSimulation on the Short Fatigue Crack Initiation of LZ50 Axle Steel for Railway VehiclesNumerical Simulation on Fracture Formation on Surfaces of Bi-Layered MaterialsA New Numerical Method for General Failure Probability with Fuzzy Failure RegionImproved Line Sampling Reliability Analysis Method and its ApplicationA Fast Approximate Method for Reliability Sensitivity Based on Markov Chain SimulationIterative Algorithm for Structure Reliability Analysis Based on Support Vector Classification MethodNonlinear Finite Element Analysis of Crack Tip of Rubber-Like MaterialResearch of Fatigue Life Simulations Applied to Large Complex StructureEvaluation of Cracked Beam-to-Column Connection from Brittle Failure Using Finite Element MethodUsing Transfer Matrix Method and Immune Algorithm to Identify Cracks in Segmented BeamsPredictive Model Based on Genetic Algorithm-Neural Network for Fatigue Performances of Pre-Corroded Aluminum AlloysFinite-Element Simulation and Analysis on High Velocity Impact Damage of Aircraft Panel StructureNumerical Simulation of Pressure Grouting in Soil Nail Pull-Out TestsNumerical Simulation of Rock Stability under Dynamic Blasting LoadNumerical Simulation of Fracture Process Zone in Concrete Tension SpecimenNumerical Studies of End Effect on Crack Propagation Behavior of Brittle Specimen Containing Pre-Existing Crack under Uniaxial CompressionOn the Relations between the Threshold Values of the Fatigue Crack Growth and the Cyclic Deformation Behavior of MaterialsDetermination of Growing Direction of Fatigue Crack Investigating Morphology Evolution of Damage by a Cellular Automaton ModellingThermal Strength Evaluation of the Super Alloy Structure with Various Thermal Insulation Performances by FEM and Stress-Rupture ExperimentMonte Carlo Simulation of Stress Corrosion Cracking in Structural Metal Materials Taking Account of Surface Crack Effects Dynamic Analysis and Three-Dimensional Finite Element Simulation of Cracked GearOn the Stress Intensity Factor of Cracks in Residual Stress FieldFinite Element Analysis of Blower Impeller Using Cyclic SymmetryDiscrete Dislocation Dynamics Simulation on Strengths of Dislocation Network Stacks in Multilayered StructuresFatigue Strength of Metals Containing Inclusions and Phase InhomogeneityNumerical Simulation on Rolling Contact Fatigue with Dent at Rolling SurfaceNumerical Investigation on the Fracture Behaviors of Three-Dimensional Functionally Graded MaterialsSimulation of Deformation Behavior in Aluminum Alloys Having Bimodal Structures Based on the Theory of Crystal Plasticity Considering Dislocation DistributionsThe Evaluation of the Effects of the Maximum Stress Intensity Factor for Fatigue Crack Opening Behavior by Finite Element AnalysisNumerical Simulation of Thermal Stress Field of Arc-Shaped Thermal-Protection ComponentApplication of Percolation Theory to Rock Damage and FractureExperimental Study on Forming Underground Space in Soil Using Explosive Lining MethodAnalysis of Slant Surface Cracks with Step Notches Subject to Contact Loadings by a Variational Boundary Integral MethodEffects of Joint Width on Strength, Stress-Strain Curve and Strain Localization of Rock Mass in Uniaxial Plane Strain CompressionFailure Process and Stress-Strain Curve of Plane Strain Rock Specimen with Initially Random Material ImperfectionsA Statistical Analysis on the Fatigue Life Characteristics of Structural Materials Damage Analysis of Medium Carbon Steel in Low Cycle FatigueA Simple Plastic-Damage Model for the Cement-Soil Admixture Generalized Thermoelastic Responses of a Piezoelectric Rod Subjected to a Moving Heat SourceA Generalized Magneto-Thermoelastic Coupled ProblemStudy of Damage Mechanism on Aluminum Alloy under Two Kinds of Stress States and FEM SimulationGeometrically Nonlinear Deformation of Circular Sandwich Plates under Transversely Non-Uniform Temperature RiseInvestigation to the Effects of Grain Misorientation on the Performance of Short CracksRelationship between Fracture Mechanism and Microstructure in PLA/PCL Polymer BlendsFailure Mechanism and Mechanical Characteristics of Rockmass Containing Close Intermittent Joints under Plane Stress Condition Nonlinear Dynamics of a Spur Gear Pair with FaultThe 3D-Crack Growth Mechanism of Brittle Material under 3D CompressionStudy on Micro-Mechanism of Crack Initiation and Propagation Induced by Inclusion in Ultra-High Strength SteelCalculation and Analysis on the Thermal Damage at High Temperature Wavelet-Based Modal Parameter Identification through Measurements for Damage DetectionEvaluation of a Strain Energy Equivalence Principle (SEEP)-Based Continuum Damage ModelThe Fracture Mechanism of As-Cast and Extruded SiCp/AZ91 Composites Fabricated by Stir CastingEffect of Residual Stress Field in Front of the Slant Precrack Tip on Bent Fatigue Crack Propagation Estimation of the Elastic-Plastic Fracture Behavior of Fiber Reinforced MMC According to the Change of Interfacial Characteristics Effect of Microstructure on Small Fatigue Crack Initiation and Propagation Behavior of Ti-6Al-4V AlloyOn Probabilistic Fatigue Crack Growth Behavior under Constant Amplitude Loads A Study on the Mechanism of Small Fatigue Crack Deflection Behavior in Alpha-Brass by Means of In Situ Atomic Force Microscopy and Crystallo-Graphic Orientation AnalysisViscoelastic Deformation of PC/ABS AlloyCombustion Synthesis of ZrW2O8 and Preparation of its Composite with Near Zero Thermal ExpansionStudy on Reliability Design of Fiber Wound Reinforced Plastics Pressure VesselDevelopment of a New Kind of Sealing Composite Material Reinforced with Aramid and Pre-Oxidized FibersUniaxial and Multiaxial Cyclic Deformation Behaviors of SiCp/6061Al Alloy CompositesStudy on the Fracture Energy and Fracture Toughness of the Polypropylene Fiber Reinforced ConcreteFabrication and Properties of a Novel Anti-Radiation BaPb0.6Ce0.4O3/Al CompositeEffect of Mechanical Activation on the Morphology and Microstructure of Ni-Al-Ti-B Composite PowdersFinite Element Analysis about Effects of Particle Size on Deformation Behavior of Particle Reinforced Metal Matrix CompositesEffect of Mg-Based Spherical Quasicrystals on Microstructure and Mechanical Properties of ZA85 AlloyAnalysis and Design of Curved Laminated Composite Panels under External Pressure Investigation on the Primary Si Phase Solidification and the Properties of SiCw/Al-18Si CompositesEffect of Interphase on Properties of Reaction Sintering Cf/SiC CompositesInfluence of Extrusion Temperature on Microstructures and Mechanical Properties of Bi2O3-Coated Al18B4O33 Whisker Reinforced Al Composites Effect of Temperature on Strain Softening Behavior of Composites with Small Misaligned WhiskersMeasurement of Delamination Strength of Thermal Barrier Coating at High Temperature by Edge-Indent TestAnalytical Solutions for Residual Stresses of Functionally Graded Medium with InhomogeneityDamage Monitoring of Thick CFRP Beam Using Electrical Impedance ChangesBiodegradable Composites Based on Polylactic Acid (PLA) and China Jute FiberFree Vibration of Composite Annular Plates Embedded with SMA Fibers in the Circumferential DirectionFormation of Cf/C Composites with SiC Concentration Gradient on the Surface by SHCLD TechniqueEffects of Polarization Treatment on Mechanical Properties of Al2O3/LiTaO3 Composite Ceramics Microstructure and Hardness Performance of a SiCp/Al Composite by Pressureless Infiltration TechniqueEffect of Heat-Treatment on the Mechanical Properties of TiB2P/2024Al CompositeInfluence of Nowonty Phase on the Fracture Toughness of SiC/MoSi2 Composites Statistical Damage Detection of Laminated CFRP Beam Using Electrical Resistance Change MethodEffect of Solution Treatment on Tensile Properties of AA2024 Matrix Composite Reinforced with Magnesium Borate WhiskerLaser Processed Intermetallic Matrix Composite Coatings on Ni-Based Superalloy SubstrateEffect of ECAP on the Microstructure and Tensile Property of SiCp/AZ91 Magnesium Matrix CompositeExperimental Study on the Mechanical Properties of Metal Oxides Filled PA1010 CompositesMechanical Alloying Influence on the Sintering of Cu-Fe Compound PowdersThe Action Mechanism of Preparation of Calcium Carbonate/Titanate Composite Material by Mechano-Activated MethodPreparation of Characterization of Calcium Carbonate/Titanate Composite Material by Mechano-Activated MethodThe Spectroscopy Characterization of Kaolinite-Organic Intercalation MaterialsThe Kinetic Analysis of Thermal Decomposition of PMMA/MMT NanocompositesSome Crystallographic Features of the Boron-Doped Diamond Single Crystals Synthesized by Fe-Ni-C-B System under HTHPFabrication and Mechanical Properties of Carbon Nanotubes/Epoxy Resin Composites Prepared by a Sonication TechniqueFracture Characteristic of Mg-Al-Zn-Al2O3 CompositesFRP Fracture Simulation Using Parallel Processing on a PC ClusterTime-Temperature-Stress Equivalence Applied to Accelerated Characterization of Creep Behavior of Viscoelastic PolymerMicrostructure and Mechanical Properties of High Strength Al2O3p/6061Al CompositesEffects of Packing Density of Micropowders on the Compressive Strength of Cement PastesInfluences of Micropowder Gradation on Rheological Properties of Cement-Based Composite PastesMechanical Properties of SiCp/Cu Composites Prepared by Electric Conduction SinteringStress-Strain Response in SiC/SiC Composites under Cyclic LoadingStudy on Solvent Debinding Process of Powder Injection Molded Ti(C, N)-Based CermetsPreparation of Novel Aluminum Hybrid Composite Containing Aluminum Borate Whiskers and Carbon NanotubesModeling and Testing Strain Rate-Dependent Tensile Strength of Carbon/Epoxy CompositesDiagnostic Method for Delamination Monitoring of CFRP Plate Using Kriging Interpolation MethodMonitoring of Delamination of the CFRP Beam by the Smart Structure System Using the SI-F MethodInfluence of Mischmetal on Performance of Copper Based Electric Contact MaterialsStress Field of Fiber-Reinforced Composites with Graded InterphaseMicrostructure Formation Mechanism of (Al2O3+TiB2+Al3Ti)/Al Composites Fabricated by Reactive Hot PressingAn Experimental Investigation on Composites Through-The-Thickness Stitched Foam Core Sandwich PanelsMechanical Properties of (Al2O3+Ni) and (Al2O3+Ni)/Ni Laminated MaterialsStudy on Process Parameters of Multi-Factor Coupling Fields CVIInfluence of Fiber Orientation and Volume Fraction on Tensile Strength and Fatigue Life of CARALL Hybrid CompositeMechanical Properties of High Reinforcement Content TiB2p/Al Composites under Quasi-Static and Dynamic LoadingMechanical Force Induced Grafting Effect on Strengthening HDPE/GF Composites with Maleic AnhydrideFabrication and Dynamic Mechanical Properties Offly Ash/Epoxy CompositesMechanical Properties of Interpenetrating Graphite/2024Al Composites Produced by Improved Squeeze Exhaust CastingFlexural Strength of Superfine Grained Si2N2O-Si3N4 CompositesThermal Physical Properties of Bulk Materials from ZrO2 Nanoparticles by Sintering ProcessSynthesis and Magnetic Properties of Polymer Derived Metal/SiCN Ceramic CompositesMicrostructure and Mechanical Properties of 2D Tyranno SA/SiC Composites by Hot PressingThe Micromechanical Stress Field of Cermets Composite Containing Interfacial Arc-MicrocracksInfluence of Sintering Aids on the Nitridation of Reaction Bonded Si3N4/BN CeramicsIn Situ Combustion Synthesis of h-BN-SiC High-Temperature CeramicsBBPPAmorphous Si-B-C-N Ceramics Fabricated by High Energy Ball Milling and Hot PressingInternal Friction of a 2D-C/SiC Composite from 25?C to 400?CElectrically Nonlinear Fracture Analysis of Piezoelectric Materials Based on CED (Crack Energy Density)Synthesis and Properties of AlN-SiC-TiB2 Ceramics by SHS-HIP Investigation on Large-Sized Sapphire Crystalline Perfection by X-Ray Double-Crystal Diffraction MethodIn Situ Toughened a-Sialon Ceramics Doped with Lutecia and YtterbiaInfluence of Nano-Silica on Microstructure and Mechanical Properties of SiO2/BN Ceramics Microstructures of ZrO2 (3Y) Ceramics after Dynamic ImpactGlass-Forming Ability, Interface Joint Strength and Thermal Properties of Sealing Glasses for SOFCInfluence of 3Y-TZP on Microstructure and Mechanical Properties of Al2O3-Based CompositesEffect of Electromechanical Loadings on Fracture Strength of Piezoelectric CeramicsEffects of Notch Size on Strength Distribution of Ceramic ComponentsEffects of Particle Distribution on the Residual Thermal Stresses of (W,Ti)C/SiC/Al2O3 Ceramic CompositeBi-Axial Flexure Strength, Weibull Modulus and Fracture Mode of Alumina Glass-Infiltrated Core/Veneer Ceramic CompositesFabrication and Microstructure of SrBi2Ta2O9 CeramicMechanical Properties of ZrB2-Based Ceramics Reinforced by Nano-SiC WhiskersAnalysis of a Thin Electrode Layer between Two Dissimilar Piezoelectric Solids Effect of Sintering Process on Fabrication of Porous Si3N4/SiC Composites Microhardness and Machinability of Fluorphlogopite-Mullite Glass-CeramicsTribology of Titanium Boride Sliding against Silicon Carbide at Elevated Temperatures The Group Velocity Change in the Unidirectional Composite Materials Effects of Preparation Processing on Mechanical Properties of TiAl IntermetallicInfluence of Y and Ba on Microstructure and Mechanical Properties of AZ91 Magnesium AlloysResearch on Weldability for Dual-Phase Steels Using Servo Gun Spot Welding SystemEffect of Annealing Temperature on Microstructure and Properties of Surface Nanocrystalline Structure in Low Carbon Steel SpecimenAgeing Processes of Li-Containing Al-Zn-Mg-Cu AlloysMicrostructural Evolution of Inconel 690 Alloy for Steam Generator TubesStudy on Pressure Variations in the Mold of Magnesium Alloy Die CastingsHigh Dense Compressive Residual Stress Produced in Laser Shock Processing on Ti6Al4V AlloysStudy on High Performance Warm Compacted Fe-2Ni-2Cu-1Mo-1C Powder Metallurgy MaterialsNickel Silicides Synthesized by High Energy Ball MillingStudy on the Microstructure and Properties of Prehardened Plastic-Mould SWFT Steel for Big SectionUniform Design and its Application in the Chemical Composition Design of Hot Work Die SteelMicrostructure of Fe-Based ODS High-Temperature Alloy Sheet Prepared by EBPVDEffect of Hot Treatment Process on High Performance Alloy Spring Steel D701 Mechanics PropertiesInvestigation of the Anti-Corrosion Ceramic Coating Formed on AZ91D Magnesium Alloy by Micro-Arc OxidationTensile Properties and Fatigue Strength of Ultrafine Grained Pure Copper Precipitation Behavior of Warm-Rolled Ti-Stabilized Interstitial-Free (IF) Steel SheetsMechanical Properties and Microstructures of Ferritic-Rolled Ultra-Low Carbon (ULC) and Ti-Stabilized Interstitial-Free (Ti-IF) SteelsThermodynamic Analysis of EB-PVD Preparing SiC CoatingInvestigation on Residual Stress and Crystallographic Texture of YSZ Films Prepared by EB-PVDSimulation on Temperature Distribution in Chemical Mechanical PolishingThe Improvement of Corrosion Resistant for the Cf/Al Composites by Ni-P CoatingsHA Active Coating on Titanium Prepared by Spark Plasma Sintering A Theoretical Model for Squeeze Film Dampers Operating with Air EntrainmentFractal Features of Surface Morphology of Uneven Eroded Hot-Dip Galvanized SteelStudy on the Carbides and the Interface Bonding in Surfacing Welding Metal Development of Coating Material by In Situ Reaction SynthesisThe Microstructure and Mechanical Properties of Ti/TiN Multilayer Film Synthesized by Unbalanced Magnetron Sputtering Deposition on 17-4PH Stainless SteelPrevention of Stress Corrosion Cracking in Welded Joint of Type 304 Stainless Steel by Laser PeeningStudy on Surface Metallurgy High Speed Steel Using Double Glow Plasma TechniquePreparation and Wear Resistance of TiN/Ti Deposition and Diffusion Multi-Layers by Plasma Alloying ProcessMicrostructure and Properties of Ni3 (Si, Ti) Intermetallic Cladding with Nb AdditionMicrostructure and Properties of Low Temperature Deposit CrxN Using Unbalanced Magnetron SputteringMicrostructure and Optical Properties of Ag/TiO2 MultilayersMechanical Properties of Coil Coating Evaluated with Dynamic Mechanical Analysis in Daul CantileverStudy On the Corrosion Resistance Properties of the Ceramic Coating Obtained Through Microarc Oxidation on the Aluminium Alloy SurfaceStudy on Properties of Plasma Sprayed CoCrAlYCoating on TiAl Alloy SurfacePlasma Surface Alloying Process of a Fe-W-Mo-Co Surface Age Hardening High Speed SteelMicrostructure and Hardness of the Laser Surface Treated TitaniumA Special Method to Evaluate the Strong Adhesion between Brittle Coating and Ductile SubstrateCoating Influence on Residual Stress in Laser Shock ProcessingInfluence of Ceria on Characterization of Films Prepared by Vapor Deposition of QuasicrystalApplication of Wear Resistant Coating Technology on Coating BladeResearch on High Temperature Anti-Abrasion Protection Technology of Thermocouple CannulaStudy of New Metal/Ceramic Cored Wires Plasma Nitriding Behavior of 1Cr18Ni9Ti Stainless Steel with Nanocrystalline Surface Induced by SMAThermal Vibration of Functionally Graded Circular PlatesTribological Behavior of DLC Films by RF-PECVD at the Elevated TemperatureFriction and Wear of Lubricated Sliding Surfaces of Coated Vane and Flange in Rotary Compressor with Carbon Dioxide as a RefrigerantCrN Coating on Magnesium Alloy AZ91 by Arc-Glow Plasma Depositing ProcessElectrochemical Corrosion Behaviors of Ti2AlNb with Double Glow Plasma Surface MolybdenizedResearch on Surface Low Alloy HSS by Plasma Surface Metallographic W, MO, C AlloyingSome Problems on Evaluating Elastic Modulus of APSed Ceramic Top Coat for TBCs by Indentation MethodCollaboration Tasks on Physical and Fundamental Properties of Plasma Sprayed Thermal Barrier Coatings in Japan Society of Materials Science Mechanical Properties of 316L Stainless Steel with Nanostructure Surface Layer Induced by Surface Mechanical Attrition TreatmentEvaluation of Silica Content on Fracture Toughness of PI/SiO2 Hybrid Films Oxidation Resistance of Ti-6Al-4V by Plasma Niobium Surface Alloying The Processing of Anti-Rust Boronizing Layer on Steel SurfaceColossal Magnetoresistance Effects of La1-xSrxMnO3Effect of R.F. Power on Structures and Properties of Amorphous Fluorinated Carbon Films Prepared by PSIIMolecular Dynamics Simulation of Exit Fracture in the Case of Nanometric Cutting ProcessSurface Plasma Molybdenized Burn-Resistant Titanium AlloyStudy of Delamination of Thin Film Coating on Cyclic Nano-Indentation TestProcessing of Environment Protective Phosphating and its Coating PropertiesSynthesis of Boron Carbonitride Films by Plasma-Based Ion Implantation Influence of Temperature on Characteristics of TiAl Plasma Surface Niobiumizing Finite Element Study of the Creep Size-Effect in Thin Metal Films Surface Morphology, Crystal Orientation and Scratch Properties of Au/NiCr/Ta Multi-Layered Metallic Films Microstructure and Resistivity of Low Temperature Deposition ITO Films on PET Substrate by Magnetron SputteringXPS Analysis of Silicon Oxycarbide Formed on the Surface of Rf-Sputter Deposited SiC Thin FilmsEffects of Dynamic Ion Mixing Coating Condition for Fatigue Properties of Stainless Steel with TiN FilmImprovement of Oxidation Property of SUS304 by Gas Barrier CoatingStudy of Boron-Doped Diamond Films by Microwave Plasma CVD MethodInfluence of Ion Bombardment Process on Adhesion between CrN Coatings and Aluminum AlloyStudy on Sputtering Characteristics of Ni80Cr20 Alloy TargetMicrostructure and Properties of Microarc Oxidation Ceramic Coatings on Aluminum AlloyMo-Si-C-N Multi-Layer Anti-Oxidation Coating on C/C Composites Development of Diamond-Like Carbon (DLC) Coating Compatible Surface by Fine Particle Bombardment (FPB)The Research of Integral Cu-W Electric Contact by Friction WeldingFinite Element Simulation for Residual Stresses in Weling Process Study on Al Alloy Welded Joint Performance Deterioration under Thermal Cycling ConditionThree Dimensional Monte Carlo Simulation of Grain Growth in HAZ of Stainless Steel SUS316Static and Dynamic Force Analysis to Large-Scale Bed of Leather Cutting Machine Tool Study on the Process Parameters of MPAW-Based Rapid PrototypingDeformation and Fracture Behaviors in the Freestanding APS-TBC - Effects of Process Parameters and Thermal ExposureDistributions of Residual Stresses in Diffusion Bonding of Dissimilar Materials Intermetallics TiAl to Steel 40Cr and Effect of InterlayerInterfacial Resistance Method for Quality Evaluation of Diffusion Bonded Joints Strength Predication for Load-Bearing Lugs of Three-Dimensional Braided CompositesFailure Assessment Diagrams of Semi-Elliptical Surface Crack with Constraint EffectApplication of Twin Laser Beam on AZ31/A5052 Dissimilar Metals Welding Effects of Adhesive Joint on the Failure Strength Properties of Natural Fiber Reinforced CompositeEffects of Fiber Layer on Failure Strength Properties of Adhesive - Joined Natural Fiber Reinforced Composites Effects of Chemical Composition and Welding Process on Fracture Resistance of Type 347 Stainless Steel WeldEffects of Resistance Welding on the Failure Strength Properties of Natural Fiber Reinforced CompositeA Study on Mechanical Properties and Durability Evaluation of Structure Adhesived and Spot Welded JointsComputer Aided Development of the Crack-Free Laser Welding ProcessesAn Estimation Formula of the Stress Concentration Factor of the Butt-Welded JointMicrostructure in the Interface between CVD Diamond Thick Film and a Ag-Cu-Ti Braze AlloyMethod of Lines to Solve 2-D Steady Temperature Field of FGMThe Effects of Energy Director Shape on Temperature Field during Ultrasonic Welding of Thermoplastic CompositesModeling of the Temperature Field during Electron Beam Welding of Aluminum Alloy by a Pre-Defined KeyholeCracking Resistance of Cu-Bearing Age-Hardening SteelMicrostructure and Mechanical Properties of Simulated Heat Affected Zone of an Ultrafine Grain Steel Laser Weld Development of Cu Brazing Sheet with Cu-P Composite PlatingEffect of Properties of Underfill Materials on Thermal Stress Relief in Lead-Free Solder Joint of Chip Size PackageInfluence of Content of Ni and Ag on Microstructure and Joint Strength of Lead-Free Solder Joint with Sn-Ag-Cu-Ni-GeA Study of Self-Loosening and Fatigue Failure of Bolted Joint under Transverse Vibration - Influences of Property Class of Bolt and Plastic Region TighteningA Study on Friction Stir Welding with Heating of Aluminum AlloyCrack Growth Characteristics of Pure Copper for Smart Stress Memory PatchMicrostructure and Strength of Alumina-Metal Joint Brazed by Activated Molybdenum?Manganese MethodThermal Fatigue Mechanism of Welding Deposited Metal of Dies SteelsFatigue Properties of a T Type Welded Joint in a Small-Sized Single Pass Boiler HeaderA Representative Stress Model Removing Weld Joint Type Dependency of S-N CurveFatigue Durability Analysis Based on FE Modeling Support System for Arc-Welded Members in Automobile Suspension ModuleFatigue Strength Evaluation of Load-Carrying Fillet Weldments under Out-of-Plane Bending Load Using Structural Stress MethodEvaluation of Local Tensile Properties of Bi-Metallic Weld Joints by Small Tensile and Ball Indentation TestsEffect of Residual Stress and Weld Metal on Hysteretic Behavior of a Welded Tubular T-JointAssessment of a New Semi-Rigid Model in Steel Beam-to-Column Connections Study on the Evolution of Welding Residual Stress under Tension Loading ConditionA New Strategy for In-Service Inspection of Nuclear Piping Considering Piping Failure FrequencyJoining of SiC Ceramic to High Strength Graphite Using Polysiloxane with Active AdditiveHeating Characteristics of Gas Tungsten Arc Welding of Copper Thick Plates with Shielding Gas of Argon, Helium or NitrogenEffects of the Welding Residual Stress on the Grounding Damage Analysis of a TankerSynthesis and Characterization of Nanosize Molybdenum Disulfide Particles by Quick Homogeneous Precipitation Method Preparation and Characterization of Cr2O3 Nano-Powders by Sol-Gel MethodA Study on Concrescence of Inert Nano Bioceramic Scalpel Wounds Fabrication and Fracture Properties of Nano-Sized HAP-TZP (3Y) Bioceramic for Artificial JointsSEM In Situ Investigation of the Effects of Ca and Sr Additions on Cracking in Cast AZ91D Alloys at Different TemperaturesAdhesion Evaluation of Titanium Oxides Films on 316L Stainless Steel SubstrateSynthesis of SnO2 Nanoparticles and Their Application on Gas SensorsUltrafine TiO2 Powders Prepared from Aqueous TiCl4 Solutions at Room TemperatureThe Synthesis and Properties Studying of 1-D TaS2 NanostructureNear Full Density Nano Iron-Based Materials by Pulse Current SinteringLactose Modified Chitosan Scaffold for Hepatocytes CulturePhenomenological Study of the Size Effect on Martensitic Transformation in Nanograined PowdersComparison of Property of Dynamic Melting-Loss H13 Steel by Different Surface TreatmentMolecular Aspect of Osteoporotic Fracture HealingSynthesis and Characterizations of Nanocubes, Monodispersed Nanocrystals and Nanospheres of AuPreparation and Performance under Corrosive Environment of Epoxy-NanocompositeSynthesis of Silicon Carbide Nanowires Doped with Al2O3Preparation of Iron Oxide Nanoparticles by a Pyrosol TechniqueBiomechanical Analysis on the Foot under Normal and Abnormal Gait for Orthotics Design Effect of pH Values on Conversion of Calcite Crystals into Calcium Phosphate Phases in Buffer SolutionsCompressive Instability of Carbon NanotubesEffects of Temperature and Concentration on the Nano-Sized Hydroxyapatite Whisker Prepared by Chemical Precipitation MethodMineralization of Chitosan via Alternate SoakingEffective Structural Parameters of Armchair Carbon NanotubesStudying Effects of Bias Voltage on Properties, Wettability and Platelet Adhered Behavior of DLC Films Prepared By DC-MFCVADDevelopment of High Technology for Improvement of Fatigue Strength in the Intervertebral Disc Herniation's Cervical Attachment SystemEvaluation of Fatigue Transverse Cracking Behavior by Cooperation of Sliding Core and Endplate in Artificial Intervertebral DiscStress Analysis of the Swelling and Deswelling Process of Thermo-Responsive Gel Development of Bone-Like Composite Material and its PropertiesEvaluations of Elasto-Plastic Properties and Fracture Strength Using Indentation TechniqueYoung?s Modulus of Polysilicon Thin Film Evaluated by Finite Element AnalysisBiomechanical Analysis of the Musculoskeletal System of Human Foot by Using Passive Elastic Characteristics of JointMechanical Behavior during Self-Oscillating of NIPAAm-Co-(Ru(bpy)3 GelThe Swelling Behavior of OrganoclaysMolecular Modeling of the Dimers from Cyclo-[(1R, 3S)-?-Acc-D-Phe]3Mechanical Properties on Nanoindentation Measurements of Osteonic Lamellae in a Human Cortical BoneAdhesion Test of Nanostructured Materials by a Novel AFM ProbeSelf-Assembly Effects of Cyclic Peptide Dimers: Molecular Modeling StudyEffects of Nitrogen Implantation on the Bonding Strength of Porcelain Fused to Pure TitaniumNanomechanical Properties of Tooth and Bone Revealed by Nanoindentation and AFMResearch and Development of Calcium Phosphate Cement The Quantitative Measurement Model of ACFM Based on Swept Frequency MethodNondestructive Evaluation of the Corroded Pipe by Time-Frequency AnalysisWavelet Analysis of Elastic Wave for Wall Thinned Inconel 690 Tube Nondestructive Detection of a Crack in a Triangular Cantilever Beam Based on Frequency MeasurementModel Based Online Diagnosis of Rotating Machinery Structural DamageCorrelation between Crack Growth Rate and Magnetic Memory Signal of X45 SteelUltrasonic Fast-Identification Expert System of the Auto Stick-Weld Defect Based on Echo-Characteristics AnalyzingExperimental Investigation on Residual Stress of Model S1100 of Crankshaft Chamfer Based on XRDNumerical Analysis of the Measuring Errors in Quantitative Detection of Defects with Shearing Speckle Pattern Interferometry Application of Nondestructive Detecting Technology for Geological Radar in a Large-Scale Highway Lanslide Treatment Infrared Thermal Image Study on Failure of Granite with HoleDamage Detection Based on the Cross Correlation Function Amplitude Vector and its Application to the ASCE Benchmark StructureInfluence of Heterogeneity on Direct Tensile Failure Process of Rocks and Associated Fractal Characteristic of AEDamage Identification of Rock Mass with Artificial Neural Networks Experimental Study on Crack Propagation by AE Location under Uniaxial Compression ConditionExperimental Verification and Theoretical Analysis on Felicity Effect of Acoustic Emission in ConcreteStatistical Damage Detection of Laminated CFRP Beam Using Electrical Resistance Change MethodCompaction Quality of Bitumen Mixtures Based on Ultrasonic MethodsNon-Destructive Evaluation of a Delamination in Laminates by Lamb Wave PropagationMeasurement of Acoustic Impedance of Thin Polymeric Films by Acoustic Resonant SpectroscopyCrack Growth Mechanisms from 3-D Surface Flaw with Varied Dipping Angle under Uniaxial CompressionThe Crack Growth Mechanism from 3-D Surface Flaw with Strain and Acoustic Emission Measurement under Axial CompressionQuantitative Evaluation of Cracks under Water by MicrowavesA Study on the Vibration Characteristics of Symmetry and Asymmetry Laminated Composite Materials by Using ESPIA Study of Magnetic Charge per Unit Area of Dipole Model for the NDEImprovement of Crack Detection Probability by Using Magnetic Camera and Image ProcessingDevelopment of Signal Processing Circuit of a Magnetic Camera for the NDT of a Paramagnetic MaterialDevelopment of Numerical Analysis Software for the NDE by Using Dipole ModelUnderstanding and Detecting Early Stages of SCC Initiation in Sensitized Stainless Steel by Means of Electrochemical Potential TransientsNon-Destructive Evaluation of Creep Damage of Ni-Based Superalloy Using A Scanning Blue Laser MicroscopeIn Situ X-Ray Stress Measurement in Electrodeposited Cu Foils under Tensile and Fatigue Loading Analysis of High Active AE Signal by Continuous Waveform RecorderIn-Process Damage Monitoring and Stress Analysis of Thermal Spray CoatingPressurized Water Corrosion Resistance of Carbon Steels and Their Nondestructive CharacterizationAn Evaluation on Corrosion Effect of Carbon Steel Using the NDT Study on Damage Mechanism of Pipe Using Ultrasonic Wave and Acoustic Emission Technique Measurement of Residual Stress in Water Pipe Welds Using the Hole-Drilling TechniqueX-Ray Stress Measurement of Fiber Reinforced Plastics Composite MaterialStudy on Fault Detection and Diagnosis of the Edge-Transmission Ball Mill SystemDamage Detection and Quantitative Assessment for the Cracked Beam Structures Quantitative Estimation of the Fastening Condition of a Bolt with Using Piezoceramic (PZT) SensorsIdentification of a Defect Using the Equivalent Load MethodInfluence of Observation Errors on the Identification of External LoadsAnalysis of Stress Intensity Factors of a Planar Rectangular Interfacial Crack in Three Dimensional BimaterialsCoupling Analysis of Fluid Film and Thermal Deformation of Sealing Members in Spiral Groove Mechanical SealReliability-Based Sensitivity Design of Beam Structure with Non-Normal DistributionANN-Based Crack Identification in Rotor System with Multi-Crack in ShaftThe Inhibition Effect of Imidazoline and Diethylene Triamine on the Stress Corrosion Cracking of 08Cr2AlMo Steel in H2S SolutionResearch on the Control Function and Control Arithmetic of Automobile Automatic BrakeA Method to Determine the Periodic Solution Based on Observed State Information and Nonlinear Analysis of Hydrodynamic Bearing-Rotor SystemStudy on Looseness and Impact - Rub Coupling Faults of a Vertical Dual-Disk Cantilever Rotor- Bearing SystemInvestigation on Levitation and Restitution Mechanisms of FPD Air Handling System Probabilistic Cyclic Constitutions and Design Curves of 0Cr18Ni10Ti Pipe SteelStatistical Reconstruction of the One-Dimensional Mechanical and Fatigue StrengthsA Statistical Load Weighted Average Fatigue Reliability Model for Uncertain Constant Amplitude Cyclic LoadStability of Two-Span Rotor-Bearing System with Coupling Faults of Crack and Rub-ImpactCorrection on Parameters in Torsion Vibration Model for Turbine-Generator Shafts Stability Analysis of Cut Rock Slope with Reinforcement by Steel CablesEffects of External Loads on the Reliability of Welded Pipe with Circumferential CrackOne Method of System Analysis Based on Some Parameters in the Underground Chambers and ApplicationReliability Analysis of Railway Tunnel Construction Process within Soft and Weak Rock Mass Using the Unified Elasto-Plastic Strength CriterionA New Concept for Assessing System Reliability Based on Probability Decomposition MethodMechanical Reliability of a Segmented Silicon Layer on Ultra-Thin Polyimide Substrates The Relation of the Geometric Parameters to the Maximal Principal Stress of CrankshaftAnalyzing the Strength and Stability of Large Underground Cavern Group with Different Generator Socket Construction Schemes Based on Three Dimensional Numerical Simulation Reliability Analysis for Rotor-Stator Systems with RubbingFirst Passage of Uncertain Nonlinear MDOF Systems with Uncorrelated Failure ModesStudy on the Relationship of Hydrogen Content and Ultrasonic Propagation PropertiesInfluence of Different Loading Modes on Rock Tensile StrengthFuzzy Method to Determine Probability Distribution Type of Fatigue Crack DataEffects of Various Types of Distribution on Probabilistic Method and FAD Experimental Study on Cracking and Integrity Stability of Xiluodu Arch DamThe Safety Assessment of Wheelchair Occupants in Road Passenger Vehicles in a Frontal Crash: A Computer SimulationStudy on the Mechanical Bend Fatigue of Micro-Joining Soldered Joint with Lead-Free Solder Expansion Behavior of Portland Cement Mortars under Sulfate Attack A Study on the Static Buckling Load Estimation of the Spacer Grid in the Pressurized Water Reactor Fuel AssemblyPrecision Diagnosis of Electric Multiple Units for Performance EvaluationOptimal Placement of Multi Circular Heat Sources of HANARO Irradiation TestComparison of Reliability of Solder Joints by FORM and SORMDamping Analysis of Asymmetrical Comb AccelerometerSafety Evaluation of Pressure Piping with Weld Flaw after Long Time Service in a Water Power PlantResearch on Crack Measurement Technique in Solids Material with Digital Image Correlation (DIC)Corrosion Behavior of Thixoformed AZ91D Magnesium Alloy in NaCl Aqueous SolutionCorrosion of 16Mn in High Pressure Carbon Dioxide Saturated NACE Solutions with Hydrogen SulfideStudy on Reliability Analysis of Tailings Dam StabilityRisk Based Approach of In-Service Inspection and Maintenance for Petrochemical IndustriesFault Diagnosis Expert System Integrated Developing Environment Based on CLIPSStatus Monitoring and Fault Diagnosis Network System Based on UPnPResonance Reliability Assessment of Turbine Blade with Parametric UncertaintyHeat-Aging Effect on the Material Properties and Useful Life Prediction of Rubber MaterialsCreep Life Prediction of Waspaloy Using the Initial Strain Parameter TechniqueEvaluation of Drop Impact Load for Thin Cone-Shaped StructuresIncreasing Damping Ratios in a Tuned Liquid Damper Using Damping BarsInfluence of Tapered Cross Section on Fatigue Damage of Cladding Fasteners on Side Faces of Tall BuildingsInfluence of Non-Gaussian Local Wind Pressures on Fatigue Damage of a Cladding Fastener on a Side Face of a Tall BuildingStress Analysis of Automotive Engine Cover under Static and Vibration Load Impact Analysis for the Egg-Crate Structure of a Nuclear Fuel Assembly by Using FEMStructural Response and Behavior Analyses of Steel Joint Components at Elevated TemperaturesNumerical Simulation of Deformation and Strength of Reinforced Concrete Slabs under Thermal-Mechanical LoadsFracture Characteristics of a Hybrid Composite Joint Beam for the Tilting Car Body under Static and Fatigue Transverse LoadsA Simple Spline Integral Equation Method for Circular Plates with Variable ThicknessDesign Technology of O-Shaped Seal Ring Based on Plastic Limit AnalysisUniform Wearing Optimum Design of Extrusion Die Profile A New Numerical Method for Axisymmetrical Bending of Circular Plates with Large DeflectionStability Analysis on Surrounding Rockmass of Deep Tunnel Based on YAI and FD Concepts12Finite Element Analysis of an Automobile Clutch SystemPrediction of Cutting Chatter Based on Hidden Markov ModelAn Integrated Neural Classifier for Stream Turbine Damage Identification Based on PSONonlinear Response of Clamped Circular Plates Subjected to Transverse Excitation LoadThe Application of ISDG Method on the Mechanical Property Measurement of the Welding-Line Material Structural Strength Evaluation of a Carbody by Finite Element Analysis and Load TestEffect of Nonlinear Shear Strength Characteristic on the Slope Stability of Super High Rockfill DamWetting Effects of Rockfill on the Deformation of the Yellow River Xiaolangdi DamPerformance Evaluations of the 3rd Rail Type Power Collector for Rubber-Tired VehiclesFatigue Properties of Spherical Graphite Iron CrankshaftsCalculation of Dynamic Parameters of Elastic Thin Plates under Blast LoadingApplication of the Rubber Panel Structure for Railway CrossingsApplication of Distance Evaluation and its Improved Algorithms in Engineering Materials SelectionOn Stress Concentration Character at the Abnormal Cross-Section of the Concentric Shaft with Bigger Diameter RatioAnalysis of Performance Characteristics in Deteriorated Subway Rolling StockApplication of Data Mining Technology in Structural Strength DesignThe Microstructures and Catalysis of Metallic Films Covering Diamond Single Crystals Synthesized from Fe-Ni-C SystemDesign of a Novel Micromachined Gyroscope with Compensatory CapacitanceEffects of Phase-Equilibrium Temperature and Pressure on the Thickness Decision of a Methane Hydrate ContainerFatigue Assessment for Ship Structure Acted on Non-Linear Wave LoadsQuantitative Analysis of Transmission Shafts after Torsion Fatigue TestWavelet Denoising of the Horizontal Vibration Signal for Identification of the Guide Rail Irregularity in ElevatorAn Enhanced Pre & Post Processing Technique for the Three Dimensional Tunnel Analysis: Tunnel Modelling Wizard Development of 3-Axis Load Cell for Measuring the Side-Force of the Rear Damper of MPVFatigue Design of Gas Welded Joint for the Railroad Car Body Using the Hot Spot StressFatigue Design of the Railroad Car Body Member Using a Simulated Single Spot Welded JointSquare-Structure Estimation of Bolt Fastening Conditions with Using PZT PatchesStructural Analysis of Boom System in 42m Aerial Platform TruckMechanical Behaviors of a Power Steering Hose Assembly during the Swaging ProcessCodes and Practice of Fatigue Design for Welded StructureDevelopment of a Material Mixing Method for Topology Optimization of a Structure with Multiple Thermal CriteriaOptimum Design of a Dynamic Micro-Mixer for Multiphase FlowOptimum Design of a Planar Micromanipulator Using Displacement AmplifierAxiomatic Design of a Spatial Micromanipulator and Experimental VerificationTopology Optimization of the Inner Reinforcement for a Vehicle?s Hood Using Smoothing SchemeOptimization of Materials and Modal Analysis for Motorcycle FrameStructural Stability Evaluation for Lifting Lug Design of Large Marine Engine by Finite Element AnalysisStatic and Fatigue Analysis of a Hybrid Joint Part for the Tilting Car Body Degradation and Failure Mechanisms of EPDM Rubbers for Automotive Radiator HosesThermal Deformation Analysis of Copper Microbridges with Speckle Interferometry and Finite ElementThe Mechanisms Analysis of the ACF Bonding Strengths after the High Temperature/ Humidity Environment TestEffects of Nano Fillers on the Conductivity, Adhesion Strength and Reliability of Isotropic Conductive Adhesives (ICAs)Microstructure and Mechanical Properties of High Densification Mo/Cu Composites Microstructure and Properties of Environmental-Friendly Sip/4032Al Composites Used for Electronic PackagingA Study on Failure Prediction of Airborne Electronic EquipmentStudy on the Service Life of Electronic EquipmentThermal Stress Distribution in the Corner of IC Package StructureThermal Stress Analysis of MCM Package Using Diamond MaterialTorsional Fatigue of 63Sn-37Pb and Sn-0.7Cu SoldersResearch on Creep Properties of Sn2.5Ag0.7CuXRE Lead-Free Soldered Joints for Surface Mount TechnologyIn Situ Thermal-Mechanical Fatigue Testing of Thin Au LinesTheoretical Analysis of Young?s Modulus and Dielectric Constant for Low-k Porous Silicon Dioxide FilmsMicro/Nano Film Getters for Vacuum Maintenance of MEMSIsothermal Aging Effects on the Microstructure, IMC and Strength of SnAgCu/Cu Solder JointA Comparative Study of the Solder Joint Reliability in Flip Chip Assemblies with Compliant and Rigid SubstratesBehavior of Anisotropic Conductive Joints under Hygrothermal ConditionsInterface Cracking of Plastic Electronic Package under Temperature and Humidity EnvironmentShape Prediction and Reliability Design of Ball Grid Array Solder Joints Low-Temperature Sintering of Nanoscale Silver Paste for Large-Area Joints in Power Electronics ModulesFluctuation Mechanism of Mechanical Properties of Electroplated-Copper Thin Films Used for Three Dimensional Electronic ModulesThreshold Current Density of Electromigration Damage in Angled Polycrystalline LineCrack Propagation Behavior at Sn37Pb-Copper Interface in Low Cycle FatigueHardness and Elastic Modulus of ZnO Thin Films Fabricated by PLD MethodOn Using Discrete Particle Approaches for Simulating the Perforation Process of Concrete Slab by Hard ProjectileFractal Characterization of Sealing Surface Topography and Leakage Model of Metallic GasketsEffect of C/Ti Ratio and Al Powder Size on Microstructure and Performance of Al-Ti-C Grain RefinerThe Analysis to the Correlation between Cooling Medium and Cooling Result of DWTT SpecimenEffect of Spring Pressure on Basic Performance of Contacting Mechanical SealsFinite Element Analysis of Dongjusi Railway Tunnel within Hard Rock Mass Based on the Unified Rock Mass Strength CriterionAnalysis of Valence Electron Theory on the Catalytic Mechanism of Diamond Single Crystal GrowthExact Relationships between Eigenvalues of FGM Circular Plates Based on RPT and those of Isotropic Homogeneous Circular Plates Based on CPTApplication of Innovative GFRP Pipe Soil Nail System in Hong Kong The Abnormal Viscosity Variation Behavior of Melt BiModeling of the Effect of Excavation Mode on the Extent of the Anisotropic Zone Surrounding Deep TunnelsEffect of Rotation to a Half-Sapce in Magneto-Thermoelasticity with Thermal RelaxationsAnalysis on the Gravel Stratum Deformation by DewateringStudy on the Electrochemical Behavior of the Weldment for SPV50Q Steel in H2S-Containing EnvironmentEvaluation of Stress Corrosion Cracking of Type 304L Stainless Steel in Low Concentration Sodium Hydroxide Solution with High TemperatureResearch on the Non-Contact Manipulation of Biomaterials in the Stationary Sound Field of Ultrasonic TransducersApplication of Superelasticity of SMAs in Bolted End-Plate ConnectionCrystal Structure of the New Compound NdFeSb3The Deformation of Discontinuity in the DDA MethodInvestigation on Purification and Degassing of TiB2/Al Composite Fabricated by LSM MethodPolyimide-Epoxy Blend for Binding Silicon Steel Sheets of Aerospace Electrical MachineriesInvestigations on Hydrogen Content Change in Melt Aluminum during Casting under Adjusted Pressure Investigation on Friction and Thermal Expansion Coefficients of Al-Sn Bearing Alloys Steel Water Continuous Casting Slag Detection System Based on WaveletThe Cutting Energy of Rubber Cutting by a Sharp CutterStudy on Structure of the New Polymer-Poly (Propylene-Co-?-Butyrolactone Carbonate) with Molecular ModelExperimental Analysis of Chemical Damage of Water to Soil StructureResearch on Mechanism of Stabilized Soil Mechanics Enhanced by Con-Aid Liquid StabilizerThe Carbonyl Group Measurement of the Membrane Copolymerized by Low-Temperature Plasma at Atmospheric Pressure of C2H2 and CO2Influence of the Thickness and Frequency in the Infrared Hybrid Method in Consideration of Heat ConductionAccuracy of Measurement of the Infinitesimal Deformation in Digital Image Correlation and the Intelligent Hybrid MethodIntensity of Singular Stress at the End of a Fiber under Pull-Out ForceFree-Edge Stress Singularity of Bonded Dissimilar Materials with an InterlayerStructural Human Impact Analysis on Shooting: Experimental and Simulation Computer-Aided Optimized Design for Multi-Alloyed Steels Specifying Hardenability RequirementsFlow-Induced Corrosion Simulation on a Plate by Finite Element Methods ?Glass Cullet? Generation Technique by Underwater Shockwave for Recycling System of Glass BottlesAccurate Determination of Stress Intensity Factor for Interface Crack by Finite Element Method Influence of the Various Li/Nb Ratios on Defect Structure and Photorefractive Properties of In: Eu: Fe: LiNbO3 CrystalsGrain Refinement and Eutectic Solidification Mechanism of Al-Si Hypoeutectic Alloy in Centrifugal Casting with Electromagnetic Field Microstructure and Ferroelectric Domains of SrBi2Ta1.6Nb0.4O9