New Materials, Applications and Processes

The Study about Microstructure Characterization of AlCoCrTiNiCu_x High Entropy Alloy System with Multi-Principal ElementPreparation and Properties Research of Cu-2.3Ni-0.24Si AlloyNumerical Simulation Software of Casting Process used for Computer Aided InstructionPrecipitate and Age Hardening Response of As-Cast Mg-8Yb-0.5Zr Magnesium AlloyRelative Activities of Deformation Modes in AZ31 Magnesium Alloy Predicted by Mesoscopic Crystalline ModelEffects of Ca on Microstructure and Properties of Spray Deposited RE Mg-Al-Zn AlloyIsothermal Section of the Zr-Sn-Nb System at 450?C in Zirconium Rich Corner(Zr=55 at.%)Passivator Composition of Rich of Phytic Acid Used for Brass-StripEffect of Rolling Process on the Microstructure of AlMgSi AlloyFractography Analysis on the Fracture Behavior of High Strength Aluminum AlloyPreparation and Characterization of PbO2 on Aluminum SubstrateEffect of Ultrasonic Cavitation Acting on Solidified Structures of 7050 Aluminum AlloyEffect of Additives on the Expansion Behavior of Alumina-Spinel CastablesEffect of Ultrasonic Field on Centerline Segregation of Cast Aluminum Alloy 7050 IngotsLong-Time Thermal Structural Stability Study on NiCr20TiAl AlloyEffects of Homogenization Treatment on Microstructure and Properties of Mg-Zn-Nd-Cd-Zr AlloyBehaviors of the Zr?1.0Sn?0.39Nb?0.31Fe?0.05Cr Alloy at High TemperatureThermodynamic Analysis of the Reduction of Na2WO4 through the Mechanochemical ReactionExperimental Study on Solidification of Copper-Iron Alloys during Wedge-Mold CastingCorrosion Behavior of Anodic Films Formed on Aluminium 7A04 Alloy in Boric/Sulphuric Mixed Acid and in Chromic AcidThe 3d Electrons and Microdefects in Binary Ti-Al Alloys Studied by Positron AnnihilationResearch of Mo Powder?s Densification during SinteringMechanisms for Enhancing Strip Flatness in Temper Mill and their ApplicationAnalysis on Primary Recrystallization Characteristics of High Permeability Grain-Oriented Silicon Steel by Inherent Inhibitor Method and Acquired Inhibitor MethodThe Electrochemical Behavior of Electrolytic TinplateEffect of Deformation Degree and Diameter Ratio on Performance of Hadfield Steel during Cold Asynchronous RollingEffect of Stress on the Corrosion Behaviors of X70 Steel in NaHCO3/NaCl SolutionMicrostructure and Mechanical Properties of X80/X100 High Deformability Pipeline SteelAgeing Precipitate Strengthening of Cu-Containing Structural SteelsDetermination of Optimal Coiling Temperature and Cold Reduction Ratio of 260MPa Grade High Strength Nb-IF SteelEffects of Zn(OH)2 on Corrosion Behavior of Hot Dipped Zn Coating in FreshwaterEffect of Texture on Secondary Work Embrittlement of IF SteelsMicrostructure Evolution in Low-Carbon Bainitic Steel during TemperingCharacteristics of Rust Layers Formed on Carbon Steel in SeawaterThe Effect of Mechanical Properties of 2.0% Vanadium Ductile Iron after Double Quenching MethodAnalysis on Tensile Properties of Stainless-Steel Fiber and Yarn Quality650?C Long-Term Structure Stability Study on 18Cr10NiNb Heat-Resistant SteelEffect of H2S/CO2 Pressure on the Corrosion Behaviors of L360QCS in the Environments Containing Elemental SulfurEffects of Electric Pulse on Solidification Process of Fe-C-S Alloy Treated with REEffect of Solution Treatment Time on Microstructure and Martensitic Transformation Point of C250 SteelInfluence of Allotriomorphic Ferrite under Different Growth Modes on the Variant Selection of Bainite in a Low Carbon SteelResearches on the Behavior of Carbon and Sulfur Segregations of 82B BilletThe Influence of Heat Treatment on Microstructure and Properties of 00Cr15Ni7Mo2Cu2 Supermarteniste Stainless SteelInclusion Removal at the Free Surface of Steel Bath by Bubble FlotationHigh Temperature Mechanical Property and Microstructure Study of Micro-Alloyed Q345B Structural SteelMicrostructure and Mechanical Properties of 60Si2Mn Steel after Austenite Inverse Phase Transformation by Sub-Temperature QuenchingStudy on Microstructure and Mechanical Properties of Newly Developed High Carbon Fe-Mn-Cu-C TWIP SteelsHigh Temperature Deformation Behavior of 25Cr5MoA Nitriding SteelInfluences of Microstructure and Texture on Toughness of Acicular Ferrite Pipeline SteelStudy on Damping Capacities of Nodular Cast Iron Dense Bar Produced by Horizontal Continuous CastingEffects of Different Manganese Content on Microstructures and Properties of TWIP SteelThe Processing, Microstructure and Mechanical Properties of Low Alloy Wear Resistance SteelsMicrostructure and Texture Comparison of an Acicular Ferrite Pipeline Steel with Different Hot Rolling ProcessOrthogonal Test on Heat Treatment Parameters of Modified Low Chromium White Cast IronMechanical Properties and Microstructure of SS400 Friction Stir Welds Pursuant to Welding DistanceCharacteristics of NEPE Propellant with Ammonium Dinitramide (ADN)Self-Supporting Electrode Based-on SWNT Paper for SupercapacitorsOptimisation of Manufacturing Conditions of Carbon Fibre Reinforced Polyetherketoneketone (PEKK) CompositeEffect of Hot Rolling Deformation on Superplastic Deformation Behavior of TiNP/2014Al CompositePreparation and Characterization of Monocrystal Nano-Sliver LamellaThe Physical and Mechanical Behavior of Hot Press Mould WPCsNi-Coated Carbon Nanotubes/Mn-Zn Ferrite Composite as Viable Microwave Absorbing MaterialsMicrostructure Modeling for Prediction of Thermal Expansion Coefficient of Plain Weave C/SiC Considering Manufacturing PorositiesThe Research on Polyxymethylene Silicon Oxide Whisker Polybasic Thermal Stabilizes Composite MaterialSynthesis and Characterization of Hybrid Polymer PAFC?CPAMEffect of Sintering Temperatures on the Reaction-Bonded Si3N4/SiC Composite CeramicsFormation of Decarbonization Layer and its Effect on Corrosion Resistance of Zirconia Graphite MaterialsSynthesis and Structural Characterization of Oleic Acid Embedded Layered Magnesium BoratePreparation of AlN-ZrO2(Ca) Composites by Hot Pressed SinteringA Study on the Tensile Strength of the Layer Splice LaminatesPreparation and Recognition Properties of Levodropopizine Molecularly Imprinted Composite MembranesSynthesis and Characterization of Temperature-Sensitive TSPU/PNIPAAm Semi-IPN PolymerAnodic Surface Treatment on Carbon Fibers - The Effect on Microstructure of Pyrocarbon Matrix during Chemical Vapor DepositionStudy on the Reinforcement of Aluminum Alloy A356 Using SiC Particles by Mechanical StirringMechanical Properties of Sandwich Structure CompositesPreparation and Properties of CNTs-Ti3Al/B4C CompositesPreparation and Properties of Bagasses Cellulose Microcrystal Reinforced Poly(Vinyl alcohol) Composite FilmExperimental Investigation on Rubberized Concrete Mixed Proportion DesignResearch of Aluminum Sheet Encapsulated by Organic Silane Acrylate Resin and Tetraethyl OrthosilicateAr Plasma Modified Multiwalled Carbon Nanotubes/NiFe2O4/Polyimide NanocompositesEffects of Alloys on Microstructure and Properties of Mo2FeB2-Based CermetsMechanical and Ablative Properties of Polyacrylonitrile(PAN)/RTV Silicone Internal Insulating CompositesPreparation and Properties of Polyvinylpyrrolidone / Zinc Oxide Composite NanofibersPerformance of Polypropylene Composites Filled by Calcium Carbonate WhiskersMicrostructure Evolution and Mechanical Properties of Mg2B2O5 Whiskers Reinforced AZ31B Magnesium Composites Extruded at Elevated TemperaturesStudy on Microstructure of Vanadium and Chromium-Carbide Reinforced Fe Matrix Surface CompositeInfluence of Dispersant on the Dispersion Stability of Nano-CoFe2O4 Refrigeration OilResearch on the Fiber Breakage Damage in Fiber Reinforced Polymer LaminatePreparation and Characterization of a Novel Flame Retarded MCA-PA6 Resin by In Situ PolymerizationEffect of Sintering Temperature and Particle Size on Porous SiC/Si3N4 Composite CeramicsEffect of Surface Treatment on the Mechanical Property and Micro-Structrue of Polypropylene/Attapulgite Composites
In Situ Polymerization Approach to Magnesium Hydroxide-Reinforced PA6 CompositesEffects of Accelerated Aging Period of Time at 150?C on Tensile Strength of 3-Dimension-4-Direction Braided/Epoxy Resin CompositesInvestigation of Phase Composition and Microstructure Characterization of the B4C/BN Composites Fabricated by Hot-Pressing ProcessEffect of High-Temperature Heat Treatment on Mechanical Property of Cr-Geopolymer CompositeProperties of Jute Fibers Reinforced Friction MaterialsGeneric Geometric Model for 3D Woven Interlock CompositesThe Influence of Clay-Like Sepiolite on the Structure and Properties of Polyurethaneurea/Sepiolite NanocompositesThe Application Finite Element Analysis with the Temperature Field Simulation of Flame-Retardant Effect on OMMT and APP for PP/PA6 CompostsAn Experimental-Numerical Approach of the Metallic Insert in CFRP/Honeycomb Sandwich Structures under Normal Tensile LoadA Novel Nonionic, Multi-Surfactant System and Separation Method for the Synthesis of Active Carbonic Anhydrase NanoparticlesLow Temperature Combustion Synthesis and Characterization of Pr-CeO2 Doped with Zr Red Ceramic PigmentsInfluences of Tm and N Doping on Surface Properties and Photoactivities of Anatase-TiO2 NanoparticlesControlled Synthesis of Water Soluble Silver Nanoparticles and the Molluscicidal EffectFabrication and Characterizes of TiO2 Nanomaterials Templated by Lyotropic Liquid CrystalFabrication, Optical Properties and SERS Spectra of Silver Semishells ArraysAgglomeration Eliminating Antimony Doped Tin Oxide (ATO) Nanoparticles by Different Drying MethodsMorphology Evolution during Annealing and Electrical Conductivity of Titania Nanotube FilmsSynthesis and Microwave-Absorbing Properties of Ni-Carbon Sphere CompositesMicromechanical Analysis of Single-Fiber Pull-Out Test of Fiber-Reinforced Viscoelastic Matrix CompositesMicrowave Synthesis of Nano-Titanium CarbideStudy of Oxidation Behavior of Zn NanoparticlesHydrothermal Synthesis and Property of Rare Earth of Fluoride NaYF4:Er3+ MaterialsDiscussion on Micro-Structure and Transport Properties of Carbon Micro-CoilPreparation of Nanometer Ferric Oxide Powders from Ferrous Sulfate by Improved Hydrolysis MethodMorphology and Optical Properties of Nickel Oxide Nanostructure from Aqueous SolutionControlled Synthesis of Two-Dimensional Networked Gold Nanowires and Microkites by Sodium Carboxymethyl Cellulose-Surfactant Soft TemplateStability of the Vanadium Oxide Films Forme by Reactive Sputtering and Ion Beam Enhanced Deposition MethodsPreparation for Nano-NiO by Electrolysis of Nickel in HOCH2CH2OH SolutionStudy on the Preparation and Performance of Epoxy Resin/AlOOH Nano-Composite MaterialsEffect of Polyacrylamide Hydrogels on Synthesis of Hollow Sodalite SpheresStudy on the Preparation and Properties of Copper Nanoparticles and their NanofluidsPurification of Carbon Nanotubes by Microwave TechnologyThe Antifriction Properties of Ultra-Fine Serpentine Powders as Lube Oil Additive on Iron-Based Friction PairMagnetoresistance and Exchange Bias Effect of (Co2MnSi)1-X-(NiO)X NanocompositesSynthesis of Mesoporous Nickel Phosphate with Long Hollow NanotubesOptical Properties Characterization of InGaN/GaN near UV Photodetector with Surface Nano-Structure Fabricated by Nano-ImprintingHydrothermal Synthesis of Neodymium Orthophosphate with Controlled Structure and MorphologyEffect of Characteristic Size on the Effective Thermal Conductivity of Anodic Aluminum Oxide (AAO) Porous Thin FilmsSynthesis of Lipid-Quantum Dots and the Fluorescence Resonance Energy Transfer of Quantum Dots in Lipid BilayerResearch Progress in Application of the Functional Ordered MicrostructuresElectrochemical Corrosion Behavior of Cu-20Fe-12Cr Alloys with the Different Grain Size in Solutions Containing Chloride IonsPreparation and Photocatalytic Property of TiO2/CSynthesis with Microwave-Assisted Sol-Gel Method and Photocatalytic Activity of Quantum-Sized TiO2 under Solar and Ultraviolet IrradiationPreparation of High-Purity a-Alumina by Oil-in-Water MicroemulsionPreparation of Ordered TiO2 Macroporous Membrane Using PBMA Colloid Crystal as TemplatePreparation and Microstructure of Al-Intercalated VermiculiteFabrication and Performances of Titanium-Grafted Microencapsulated Phase Change MaterialsHydrothermal Synthesis of Calcium Borate WhiskersPreparation of Nanometer-Sized Nickel Oxide by Hydrothermal DecompositionA Novel Gold Nanoparticle/Poly(AMPS-co-HEMA) Composite Hydrogel for Selective CatalysisEffect of Stacking Fault Energy on the Mechanical Properties of Cold-Rolling Cu and Cu-Al-Zn AlloysUiformly-Sized, Molecularly Imprinted Polymers for Naproxen by Precipitation PolymerizationPreparation and Thermal Stability of Micro/Nano Silicone Rubber ParticlesStudy on Preparation and Photocatalytic Performance of Co-Doped TiO2 with Cu and CeGas Response for Ethanol of SnO2 Nanorods as Sensing MaterialsPrepare Uniformity Superfine WO3 by Spray DryingMorphological and Magnetic Characteristics of Strontium Ferrite Micro- and NanofibersMicrowave Assisted Eletroless Copper Plating on Carbon NanotubesSyzygium Samarangense Leaf Mediated Biosynthesis of Gold Nanoparticles and its Application in CatalysisMolecular Dynamics Simulation of Nanoindentation on Diamond Crystal [100] SurfacePreparation and Characterization of Titania Porous-Nanotube Arrays with a High Growth Rate on Flexible Stainless Steel SubstrateShape Modification of Net Shaped CuO and Cu Nano Particles for a Percolation Threshold Using a Chelating AgentDealloying Behavior of Al-Cu-Sn Ternary Alloy in an Alkaline SolutionEffects of Doped Cu, Mn on Electrical Properties of SrTiO3-Based Varistor CeramicsSynthesis of Al4SiC4 Powders from Kaolin Grog, Aluminum and Activated Carbon as Raw MaterialsThe Influence of Cu on the Electrical Properties of Ti(C, N)-Based CermetsEffects of Ion Doping at Different Sites on Electrical Properties of Ferroelectric Bi4Ti3O12 CeramicsEffect of Ferric Oxide Addition on the Performance of MgO-Al2O3 System MaterialsFabrication of MgO-SiC Refractory Composite Powders by High-Silicon Magnesite and Carbon Black PowdersSynthesis of Al4SiC4-Al8SiC7 Composite Powders by Carbothermal Reduction ProcessPreparation of A14SiC4 by Solid-State ReactionInfluence of Heat Treatment Process on Properties of Polycrystalline Alumina FiberProcess Factors Using Centrifugal Spray Drying to Prepare Bauxite MicrospheresResearch on the Sinterability of MgAl2O3/SiC Composites in Air AtmosphereSynthesis of MgAl2O4-SiC-C Refractory Powders by Using Forsterite, Alumina and Carbon BlackEffect of Sintering Atmosphere on the Dielectric Properties of BaTiO3 via Boron-Addition Liquid-Phase SinteringEffect of Praseodymium Salt on Properties of Anodic Aluminum Oxide FilmsPreparation and Hydration Resistance of MgO-MgAl2O4 Composite RefractoryPreparation of the System of BaO-MgO-Al2O3-TiO2 Acid-Resistant Fracturing ProppantsSynthesis of Ce0.8Nd0.2O1.9 Nanocrystalline Powders by Low Temperature Combustion ProcessEffect of Processing Parameters on the Properties of Glass?Ceramics from Arc-Melting Slag of Incineration Fly AshMagnetite and Anti-Microbial Properties of Ag2O-CaO-Fe2O3-SiO2 Glass-Ceramic by Sol-Gel MethodEffect of Annealing Atmosphere on Structure and Properties in Chemically Deposited PbS Thin FilmsMicrowave Absorbing Performance and Infrared Emissivity of Co-Doped ZnOOptical Properties of Two Novel Terbium Thermo-Sensitive Poly(N-Isopropylacrylamide) GelsMagnetization Reversal in Ferromagnetic Thin FilmsSyntheses, Crystal Structures and Luminescence of Two Coordination Polymers Based on Isophthalic Acid and 2-(3-Pyridyl)benzimidazole LigandsSynthesis and Fluorescence Switching of a New Purple Photochromic DiaryletheneMixed-Phase Crystallization and Visible Fluorescence in Rare-Earth Ions Doped Germanate Glass-CeramicsStudies of 3d Electrons and Hyperfine Interactions in Ordered and Disordered Fe50Al50 AlloysGamma Irradiation Effect on Load-Deflection Curve of Semiconductor PackageMolecular and Crystal Structure Analysis of an Oxalate-Bridged Sodium 2D Polymer: [Na(?1,1,2,3-Oxalato)(di-?1,1-H2O)]NSynthesis and Luminescent Properties of Y2O3:Eu3+ Nanocrystal by the Ultrasonic MethodHighly C-Axis Oriented Barium Titanate Ferroelectric Films Deposited on SrTiO3 Substrate Using an Off-Axis Sputtered Conductive Oxide Layer as Bottom ElectrodeEffect of Eu3+ on Spectroscopic Properties and Energy Transfer in Er3+/Eu3+-Doped Ga2O3-GeO2 GlassThe Research about the III-Nitride Compounds Epitaxially Grown on Si SubstrateSynthesis, Photochromism and Optical Storage of a New Type of Diarylethene CompoundPreparation of Magnetic Fe3O4 Nanoparticles by Microbial Reduction Combining Natural Oxidation MethodInvestigation on the Morphologies of Dislocations in Sapphire CrystalsThe Dielectric Tunability of Fe-Doped Pb0.3Sr0.7TiO3 Thin Films Prepared by Sol-Gel MethodSynthesis and Photoluminescence Properties of Doped Europium Complexes with 2-PyrazinecarboxylatePhotoluminescence Properties of Sm3+-Doped La2O3 PowdersElectrochemical Synthesis and Photovoltaic Properties of Polythiothene/CdSe Double Layers ElectrodeSynthesis and Luminescent Properties of M2P2O7:Eu3+ (M = Ca, Sr, Ba ) PhosphorsLuminescence Properties of Er3+/Tm3+-Doped Ga2O3-Bi2O3-PbO-GeO2 System GlassesSynthesis, Characterization, Room Temperature Fluorescence and Phosphorescence Properties of Complex Gd(C5H8NO3)2(C3H5N2)2Cl3?3H2OInfluence of Al Substitution on Magnetocaloric Effect in La0.8-XAlXCe0.2Fe11.4Si1.6 CompoundsSpectroscopic Properties of Er3+-Doped Ga2O3-GeO2-Bi2O3-PbO GlassElectrochemical Synthesis of POT for Electrochromic and Solar Cell MaterialsInfluence of Fabrication Process on Magnetic Properties of Co-Finemet Nanocrystalline Powder CoreEffects of C Addition on Glass-Forming in FeCPSiBMoMn Bulk Metallic with Good Soft-Magnetic PropertiesStructure and Luminescence of Ba3MgSi2O8: Eu2+, Mn2+ PhosphorsBlue Upconversion Luminescence Properties of La2(WO4)3:Yb3+/Tm3+PhosphorA New Fluorescent Material of Zn (II) Complex with 1-Acetyl-2-Naphthol-4, 4?-DiaminodiphenylmethanePreparation and Characterization of Light-Color Conductive Composite Based on TalcStudy the Effect of Junction Temperature on the Peak Wavelength in GaN-Based High-Power Green Light Emitting DiodesEfficient Synthesis and Properties of a Photochromic Hybrid Diarylethene Bearing a Isoxazole MoietySynthesis and Magnetic Properties of Poly(Schiff Base) Complex Containing 4,7-Disubstituted-1,10-PhenanthrolineHardness Variation of Ball Bond Wire BondingSynthesis, Properties and Application in Optical Memory of a Novel Photochromic Diarylethene Bearing an Anthracene RingThe Effect of Hyperbranched Polymers on the Dyeing Properties of Polypropylene FibersStudy on the Wear Properties and Wear Mechanism about TC4 and G3 Alloy Tubing Steel in Dry ConditionThe In Vitro Degradation Kinetics of Polyurethane Prodrug MaterialsStudy on the Properties of Mesogenic Monomer Exhibiting Blue Phase and Synthesis of Side-Chain Liquid-Crystalline PolysiloxanesEffects of Coal on the Structure and Properties of Coal/LDHs CompositesThe Best Solution for Removal of Iron and Oil from Hot Condensed WaterThe Research on the Surface Topography of Diamond Crystals at High Pressure and High TemperatureA Novel Method for Preparation of Antimicrobial Cellulose Textile by Surface Carbamatization and N-ChlorinationSimulation of GaAs/AlxGa1-xAs/InyGa1-y As Double-Barrier Resonant Tunneling StructuresOrdered Langmuir-Blodgett Films of Novel Sandwich-Type Heteroleptic (Porphyrinato) (Phthalocyaninato) Europium Complex?-Fe /Nd2Fe14B Nanocomposites for Electromagnetic-Wave-Absorber in GHz Microwave FrequenciesSynthesis, Photochromic Properties and Application in Optical Memory of a Diarylethene Based on Pyrrole RingCation-Exchange Membranes Prepared by Pre-Irradiation Grafting of Acrylic Acid and Sodium Styrene Sulfonate onto ETFE MembranesSynthesis and Optical Property of an Asymmetric Photochromic Diarylethene Derivative Bearing BenzofuranSynthesis and Properties of a New Photochromic Compound Bearing Isoxazol MoietyThe Surface Modification of Silica with VinyltriethoxysilaneSynthesis and Photophysical Properties of Red-Emitting Iridium (?) Complex Bearing BenzothiazoleSynthesis and Adsorption Properties of Ethylenediamine Modified Chitosan/Nano-Iron Magnetic MicrospheresPreparation, Characterization and Photocatalytic Activities of ZnO/TiO2 Nanotube CompositesEffects of Hydrolyses on Lanthanide Inorganic-Organic Luminescent MaterialsThe Research on Microstructure of Catalyst and Growth Mechanism of Boron-Doped DiamondNon-Dopant Electroluminescent Devices Based on Benzoxazinone Derivative as Strong Fluorescence in Solid FilmPreparation of RHA-Paraffin Phase Change MaterialsEffect of Rare Earth Composite Refiner Agent on Decolorization and Fining of the Floating GlassesDrug Release Characteristics of P(AA-co-DMAA)/SA Interpenetrating Polymer Network HydrogelsThe Luminescence and Energy-Transfer of Ce3+, Tb3+ Activated Sr3B2O6Study on the Perfect Dislocation in Cd0.9Zn0.1Te Single Crystals by HRTEMSynthesis, Photochromism Properties of a Novel Hybrid Diarylethene Based on Hydroxyl GroupResearch on Thermal Conductive and Insulating Material Based on Phosphoric Acid AdhesiveInfluence of Lime Dust on Chloride Binding Capacity of Fly Ash-Cement PasteStudy on the Optimal Formula of Lubricant with Uniform DesignEvaluation of Relationship between Innitial Current, Conductance, Chloride Diffusion Coefficient and Charge Passed of ConcreteSynthesis of Cordierite from the High-Alumina Fly Ash and Talc Powder MixturesA New Ecofriendly Cold Ramming Paste for the Aluminum Electrolysis CellInfluence of Foaming Agent on the Properties of High Density Foam ConcreteThermal Characteristics of PCMs - TH29 in Building Energy StorageDifferent Constructed Wetland Substrates and their ApplicationsPreparation and Adsorption Properties of PDMDAAC Modified BentoniteEffect of Polymer Content to Mechanical Properties of Fly Ash SlurryReal-Time Monitoring of Rebar Corrosion in ConcreteStudy on the Heterojunction Photocatalyst Nb2WO8/ZnO Prepared by Ball Milling MethodThe Effect of Surfactant and Alkali on the Surface Tension of Simulated Solutions of Alkali Activated Slag Cement SystemProperties of Concrete Containing Scrap-Tire ChipsPreparation and Characterization of PP-PVA Blends and Controlled Release System Comprising Bensulfuron-MethylStudy on Properties of Cottonseed Protein PlasticsNumerical Analysis Programming on the Concrete Elastic-Plastic BehaviorStudy on Stability of AgI/TiO2 Visible Light Photocatalysts in Solutions of Various pH ValuesEffect of Stone Dust Content in Manufactured Sand on Chloride Diffusion Coefficient of Various Strength Grade ConcretesStudy on the Effect of Amphoteric Bagasse Hemicellulose on Heavy Metal AdsorptionStudy on Preparation and Near-Infrared Reflective Properties of NaZnPO4A New Fiber Reinforced Composite Material Properties and Engineering ApplicationGrinding Aid Effect of Different Siliceous Material for Quick LimeEffect of the Additive on Thermal Conductivity of the Phase Change MaterialPreparation and Cement Fluidity of Slow-Release Polycarboxylate-Type SuperplasticizerSynthesis of Polythiophene Nanoparticles by Microemulsion Polymerization for PhotocatalysisEffect of Electric Field on Cation Migration and Electrode Reactions of Mortar with Different W/C RatiosSol-Gel Transition Kinetics of Konjac Glucomannan Dilute Solution by Fluorescence TechniqueThe Influence of the Combustion Atmosphere on the Desulfurization CharacteristicsStudy on Photocatalysis Degradation of Phenol by Using Tourmaline/ TiO2 System as CatalystMicrowave-Assisted Synthesis of Corn Starch-Graft-Poly(AM-DADMAC)Research on the Performance of an Eco-Friendly Nitrogen Organic Boric Acid Ester Antirust AdditiveInfluence of the MB Value of Manufactured Sand on the Mechanical Property of ConcreteStudy on Phenolic Resin Modified Magnesium Oxychloride CementAdsorption of Dyes from Acidic Wastewater by Crosslinked Chitosan ResinPreparation and Mechanical Properties of Cotton Stalk Bast Fibers Reinforced Polylactic Acid Biodegradable CompositesPreparation and Flame Retardancy of Unsaturated Polyester Resin Containing P-Toluenesulfonate-Pillared Layered Double HydroxideStudy on the Synthesis and Characterization of a Novel Phosphorus-Nitrogen Containing Intumescent Flame Retardant1 Year Long Term on Strength Properties of Pozzolanics Local Soil BricksPreparation of Activated Carbon Fiber Supported Nanoscale Fe0 for Simultaneous Adsorption and Dechlorination of Chloroform in WaterFenton-Like Mineralization of Anion Surfactant by Fe2O3/Attapulgite CatalystInfluence from Covering TiO2 Nanoparticles with Dense Films upon Electron Transport in Dye-Sensitized Solar CellsInvestigation of Ni-Mo-P Coating Electrodeposition under Stabilized Magnetic Field and its Hydrogen Evolution ActivityStudy on Pt-SnO2/C Electrode Prepared by Different Content of Nafion for New Direct Ethanol Fuel CellsElectrochemical Performance of Polypyrrole/Multi-Walled Carbon Nanotubes Composites for Supercapacitors ElectrodesEnhanced Hydrogen Storage Kinetics of Melt Spun Nanocrystalline and Amorphous Mg2Ni-Type Alloy by Substituting Ni with CoFabrication and Photocatalytic Performance of Bi2O3 Doped with Fe3+Study on Photoelectrochemical Performance of ZnO Nanotube /CdSeQuantum Dot-Sensitized Solar CellAn Excess Heat Phenomenon Triggered by Pressure in a H-Pd Gas-Loading SystemEffect on Hydrogen Evolution Properties of PtCuLaOX Membrane Electrode by Oxygen Flow and Acid TreatmentEffect of Several Reagents on Photocatalytic Decolorization of Methyl Orange in Bi2O3 Suspension SystemsEffect of Synthesis Conditions on the Structure and Electrochemical Properties of LiNi1/2Mn1/2O2 by Sol Gel MethodFacile Synthesis of New Nanocomposite Based on Cobalt Oxide and Carbon Nanotubes with Excellent Electrochemical Capacitive BehaviorPreparation and Characterization of Three Dimensional Sn-Co Alloy Based on Porous Ni for Lithium-Ion BatteriesEnhanced Electrochemical Hydrogen Storage Characteristics of Mg2Ni-Type Alloy by Substituting Mg with LaPreparation of Tin Nano-Spheres Film Anode Based on Copper-Nickel Nano-Pillars for Lithium Ion BatteriesDry Water: a Prospective Material for Methane Storage via Clathrate Hydrate FormPhotoelectrical and Photovoltaic Peroperties of n-ZnO/p-Si HeterojunctionPreparation of Tris(8-Hydroxyquinoline-5-Sulfonic Acid) Iron(III) Complex and Photocatalytic Property of Surface Modified TiO2Effect of Synthesis Temperature on Structure and Electrochemical Properties of Nano-Sized Li4Ti5O12 by Self-Combustion MethodSynthesis and Performance of LiCo1/3Mn1/3Ni1/3O2 Cathode Material for Lithium-Ion BatteryInfluence of Citric Acid and Calcination Temperature on Microstructure of the Nano Precursors of La-Mg Hydrogen Storage AlloyEffect of Temperature on Anaerobic Fermentation of Banana Stem ResiduePreparation of Layered K4Nb6O17 and its Photocatalytic Activity for Hydrogen ProductionControlled Crystallization Synthesis of Porous FePO4?3H2O Micro-Spheres for Fabricating High Performance LiFePO4/C Cathode MaterialsSurface Modification of LiCo1/3Ni1/3Mn1/3O2 with LaF3 for Lithium-Ion BatteriesStudy on a Cd-Fe Redox Flow Battery in a Sulphuric Acid ElectrolyteThree Reductions Used in Preparation of the Silver Nano-Particle for Crystalline Silicon Solar Cell and its CharacterizationCastor Oil and Microcrystalline Cellulose Based Polymer Composites with High Tensile StrengthEvaluation and Optimization of The Factors Affectiing Enzymatic Hydrolysis of Silk FibroinAppraisal about Stainless Steels for Piercing JewelryPreparation and Morphology of SMPU/PNIPAM Semi-IPN Microporous MembranePreparation of Cross-Linked Sodium Hyaluronate Gels with Different Molecular Weights of PEG and Research for its Viscoelasticity and Enzyme-Resistant Properties In VitroEffect of Negative Poisson's Ratios of Auxetic UHMWPE on the Contact Mechanics in Artificial Hip Joint ReplacementEffect of Pretreatment Process on Thermal Oxidation of Biomedical Grade Cobalt Based AlloyExperimental Investigation on the Lipid-Lowering Activity of Three Novel Antilipidemic Materials In VitroEffect of Thermocycling on the Properties of Goat Skin LeatherCorrosion Behavior of Porous Ti-24Nb-4Zr Alloy in Different Simulated Body FluidsSynthesis and Luminescence Properties of Tb3+-Doped HydroxyapatitesAnalysis of Monosaccharide Composition of Maize Pollen PolysaccharidesMechanical Properties of Ti-Nb-X-CPP Biomaterial Fabricated by Spark Plasma SinteringResearch on Compound and the Best Proportion of Phase Change Materials Using in ClothesThermal-Oxidation Degradation of Microwave Drying Nature RubberPreparation and Mechanical Properties of Zirconia-Mullite Nano-Comoposites from TiO2-Doped Si-Al-Zr-O Amorphous BulkEffect of Low-Voltage Electric Current Pulse on Semi-Solid Microstructure of Magnesium Alloy AZ91DDeformation Behavior of Porous Ti-6Al-4V Alloy Samples Fabricated by Hot Isostatic PressingDevelopment and Application on Simulation System of Plate RollingInfluence of Cutting Parameters on Surface Characteristics for Milling Powder Metallurgy Nickel-Based SuperalloyPrint Parameters Influence on Parts' Quality and Calibration with 3DP-Part I: Print Parameters Influence on Parts? Surface TopographyResearch on Process Optimization of Thin-Wall Plastics Injection Based on Moldflow and Orthogonal ExperimentA Study on Forming Process of Chips during Cutting Cast IronEffect of Controlled Rolling on Mechanical Property and Microstructure of Nb Microalloyed H BeamFinite Element Simulations of Working Characteristics of Solid Expandable Tubular Threaded JointApplication of Software DYNAFORM to the Tube Forming Process with Multi-StagesElectrode Material Effect on Electrical Discharge Machining PcBN Cutting Tool ProcessingMulti-Objective Optimization by Gaussian Genetic Algorithm and its Application in Injection ModelingSimulation of Drawing Process for Spring Seat of Spiral Step and Multiobjective OptimizationMicrostructure, Properties and Work Hardening Behavior of High Strength Cold Rolled Dual-Phase SteelPrint Parameters Influence on Parts' Quality and Calibration with 3DP-Part II: Print Parameters Calibration and Contour Accuracy ControlEffect of Processing Parameters on the Hot Compressive Deformation Behavior of 20CrMnTiHEffect of Tea Saponin on the Uptake of Cadmium by Corn from SoilFinite Element Analysis of ?-Titanium during Equal Channel Angular ExtrusionCombined Effect of Electromagnetic Field and Grain Refiner on Microstructure of F310 Mm 7050 Aluminium Alloy IngotEffects of Electromagnetic Stirring on Morphology Evolution of Primary Phase in Semisolid AlloyControl of Pressure Fluctuations in Foamed Sheet Die?s EntrancePreparation of Fe3+/Ag+ Co-Doped Nanometer TiO2 Photocatalyst with Sol - Gel Auto-Igniting MethodEffects of Hair Fibers on Braking Friction MaterialsStructure Analysis and Optimization of Precision Grinding Machine BedSimulation Analysis of Drag-Reduction Effect by Dimpled Surfaces with Quasicrystal and Crystal Lattice ArrangmentSimulation and Experimental of Magnetron Sputtering Film Thickness DistributionStudy of Solidification Microstructures of Multi-Principal High-Entropy Alloy FeCoNiCrMn by Using Experiments and SimulationSimulation of Microstructures in Solidification of Continuous Casting Aluminum Alloy Thin StripComputational Simulation of Corrosion Perforation in the Oil-Tank Bottom with Cellular AutomataResearch on the Optimized Tool-Path Planning of Computer Controlled Optical SurfacingThe Twinning Modes of B2-B19' Martensitic Transformation in NiTi Alloys - A Phase Field StudyThermodynamics Analysis in the Simulation Process of ?Fe ? aFe Isothermal Transformation?s Grain Nucleation and GrowthStudy on the Pretightening Assembly Moving Beam of Open-Die Forging Hydraulic PressPhase Field Modeling for Grain Growth of Static Recrystallization of Deformed AlloysCrystal, Electronic and Magnetic Structure of Co and Ag Doped Rutile TiO2 from First-Principles CalculationsThe Realization of Numerical Control Machining of 2D Parts Based on MasterCam FBMBehavior Engineering for the Analysis and Verification of ProcessesNumerical Simulation of Multi-Track Laser Cladding ProcessResearch on the Effects of Welding Sequence on Welding Residual Stress of High-Speed Train Based on SYSWELDNumerical Simulation of the Relation between Plasma Reflection and Keyhole Dimension in the Keyhole PAW ProcessNumerical Simulation of Welding for Box Beam Structure on Bogie of High Speed TrainResearch Materials of Chills Effect on the Solidification Process of ZM5 ShellResearch on Methods of Sheet Blank Shape Optimization for Drawing of Complex Special-Shaped BoxesA Pseudo Inverse Approach with Kinematically Admissible Intermediate Configurations for the Axi-Symmetrical Cold Forging ModellingThe Effects of Mn Addition on Microstructure and Properties in 6061 Aluminium AlloyStudy on Infiltration Kinetics of High Temperature Self-Lubrication Composite by Pressure InfiltrationThe Simulation of the Influence of Honed Edge Radius on the Maximum Temperature in Drilling 42CrMo with K-Grade Carbide Drill BitFormalizing Manufacturing Process Modeling Using Composition TreesNumerical Simulation of the Tunnel Oven with Fluent SoftwarePhase-Field Simulation of Directional Solidification Microstructure Evolution in a Binary AlloyDirectional Solidification Microsegregation and Concentration Analysis with Different SupersaturationStudy on Hot Processing Maps and Flow Instability of 1235 Al Alloy Treated by Different Methods of PurificationThe Effect of Active Packaging Film on the Quality of Dashehari Mango FruitsPerformance Evaluation of SHY-99 Coating for Carbon Steel Water-CoolerEffect of Brazing Clearance on Microstructure and Strength of Welded Joint of 316L Stainless SteelPreparation and Characterization of Paclitaxel Imprinted Silica NanoparticlesEffect of Negative Bias Voltage on Corrosion Resistance of TiN Coating Deposited by MAIPNb-C Alloyed Layer Prepared on TiAl Alloys by Plasma Treatments and its First-Principles InvestigationCharacteristics of Surface and Interface of Mercury-Stannum Reactive Wetting at Room TemperatureSynthesis and Characterization of Lamellar Nanostructured Yttrium Films Using Lyotropic Liquid Crystalline TemplatesStudy on the Distribution of Macro-Particles on Films Prepared by Magnetic Field Enhanced Arc Ion PlatingStructure and Corrosion Resistance of Iron Coatings Containing Silicon PowdersSemiconducting Behavior of Organic Polymer Coating during its Degradation in 5? Sulfuric Acid SolutionLow Cycle Fatigue Behavior of Spray Formed Superalloy RingsAdhesive Bonding of Glass Fiber Reinforced PolypropyleneSynthesis and Tribological Properties of MoSe2/C and MoSe2 NanoflakesEffect of Phase Composition and Microstructure of Oxide Scale on the Corrosion Resistance of SS400 Hot Rolled StripRepeated Impact Resistance of Cr-Mo Surface Alloying Layers on Ti6Al4V AlloyNovel Electrochemical Behavior of Organic Polymer Coating in Alkaline SolutionThe Study about Environmentally-Friendly Passivation Technology Process and Performance on Brass SurfaceStudy of Corrosion Behaviour of Molybdenum Series Coatings on Galvanized SteelEffect of Thermal Input on Finite Element Predictions of Welding Residual StressesGrowth Characteristics of Pulse Electrodeposition Fe-Si LayerStudy on Surface Modification of Ammonium NitrateDevelopment of CVD Diamond Thin Films on Titanium Substrate and Study their Tribological BehaviorMicrostructure and Oxidation of 55%Al-Zn-Si Hot-Dip Coatings Deposited on Low Carbon Steel at High TemperatureSingle Layer Brushite Coating onto Stainless Steel Substrate Using Dip-Coating TechniqueEffect of Pack Al Content on Growth Kinetics at 650 ?C of Ni2Al3 Coating Layer on Nickel-Electroplated Creep Resistant Ferritic SteelsThe Study of Acid Doped Polyaniline Anticorrosive CoatingsCoupled Magnetic Field Enhanced Arc Ion Plating: Process, Plasma and Deposited FilmThe Tribological Characteristics of Polyimide Bonded Solid Lubricating Films under Different Lubrication ConditionsStudy on W-Mo-Dy Multi-Elements Diffusion LayerFeature-Based Volume Decomposition for Robotic Weld Deposition-Based Rapid PrototypingSimulation on Temperature and Residual Stress Field of Laser-MIG Hybrid Welding of A6N01-T5 AlloyProgress in Ice-Phobic CoatingElectroless Deposition of Nickel on the Surface of Silicon Carbide Crucible from Alkaline BathElectrodeposition and Hardness and Corrosion Resistance Propertie of Ni/Nano-B4C Composite CoatingsTribological Properties of NiCr-Cr3C2 - Ni / MoS2 Supersonic Plasma Sprayed Coating under Different TemperaturesElectrochemical Studies on the Passivation Behavior of Cu-Ni-Fe Alloy in Borate Buffer Solution at pH 8.4Study on Corrosion-Resisting Properties of High-Speed Arc Sprayed Zn-Al Alloy Coating in CavernsEffect of Phosphating Technologies on Corrosion Resistance of Phosphate Coatings on 6063 Aluminum AlloySynthesis, Characterization and Corrosion Protection Properties of Polyaniline/TiO2 NanocompositePost-Weld Oxidation Behavior of AA6061 Al AlloyPreparation of Activated Carbon from Medical WasteFormation Mechanism of Alumina NanostripModel Tests Study on the Bending Properties of the External Pre-Stressed Combination Box Girders with Corrugated Steel WebsInfluencing Time Response of Nano Photoelectric on the Factors FilmsStudy on Mechanism of Rock Fragmentation of TBM Disc CutterStudy on the Thermal Degradation Kinetics of Modified Chloroprene Rubber Adhesive Dedicated to Bonding UHMWPE and 45# SteelStudy on Nano-SiO2 Measured by Atomic Force MicroscopeInfluence of Inclusion on Fatigue Performance Evaluation of High Strength Transmission Shaft SteelEffects of Low-Voltage Pulsed Magnetic Field and Pouring Temperature on Solidified Structure of Al-4.5%Cu AlloyFirst-Principles Study on Structure and Stability of YAP CrystalScttering of SH-Waves by Interface Semicircular Debonded Cylindrical Lining and Linear Cracks Originating at Edge of LiningMechanical Properties of Carbon Cathodes during Aluminium ElectrolysisPrediction of the Tertiary Structure of a-Glycosidase from Aspergillus niger by Homology ModelingCritical Life Prediction of Ship-Borne Helicopter Metallic Dynamic Components Based on Corrosion DamageFractals and Catastrophe Analysis of Fatigue Crack Propagation for Sample by Plastic DeformationThe Cycle Measurement of Sulfur Blank Value with the CS-444 Infrared Ray Carbon Sulfur AnalyzerStudy on Surface Stress Measurement of Laser Cladding Fe-Based Alloy Coating Based on Rayleigh Wave Signal AnalysisThe Tribological Behaviour of Beryllium Copper Alloy QBe2 against 30CrMnSiA Steel under Sliding ConditionApplication of GM Yield Criterion in Plastic Zone of Mode?Crack and Burst Pressure for PipelineInfluence of Solution Temperature and Time on Microstructure and Properties of A357 AlloyDiscussion of the Evaluating Criterion of 400?C Low Cycle Fatigue Life under Multiaxial Stress StatesThe Lattice Stability of Ti, Zr and Hf in an Ultra-Soft Pseudopotential Method of the First-PrinciplesExperimental Investigation of the Phase Equilibria of Al-Zn-Ti System in Al-Rich Corner at 400 ?CThe Electronic Properties of Al-, P-Doped and Al, P Co-Doped Boron Nitride NanotubesStudy on the Range of Freeze-Thaw of Surrounding Rock from a Cold-Region Tunnel and the Effects of Insulation MaterialQuantitative Process Risk Analysis Based on Dynamic Simulation of Gas Gathering ProcessQuantitative Analysis of the Content of Substituent Group in Difunctional PolysiloxaneFatigue Behavior of Cast Steel ZG20SiMn under Stain Control ModeThermodynamic Study on CuInO2 Preparation by Solid Reaction MethodThe Studies on the Thermophysical Properties of Binary Systems of Neopentylglycol and the DerivesThe Cracks in the Residential Dwellings and their TreatmentStrengthen Mechanism of Hard-Drawn Cobalt-Base Elastic AlloyHydrogen Atom Adsorption on a-Al2O3(0001) Surface from First PrinciplesMicrostructure and Mechanical Properties of TiB2/Al CompositesApplication of CAD/CAE/CAM Technology in Plastics Injection Mould Design and ManufactureFatigue and SCC Behavior of Sensitized SUS304 Stainless Steel in Pressurized Hot Water at 7.3MPa and 288?CMeasure of the Photosynthetic Efficiency of the Cabbage Leaves by Using Photo-Acoustic Tomography Spectroscopy TechnologyStudy on Safety Assessment Methods of the Penstock of the High Head Hydropower Station Using the China Standard GB/T 19624-2004An Optimization Method for Optimal Engineering Structure Design Combining Intelligent Optimization Algorithm and CAE CodeRecrystallization Law of Ti-IF Steel During Annealing ProcessSurplus Fatigue Life Prediction of Diesel Engine Piston by the Equivalent J-Integral ApproachElectrochemical Corrosion Behavior of Different Heat-Treatment Temperature Fe-Based Bulk Amorphous AlloyEffect of PEG on Stability of Alkalinity Silica SolHigh Velocity Impact Damage Analysis for Glass Epoxy-Laminated Plates