New Materials, Applications and Processes

Preface and Organizing Committee
Chapter 1: Non-Ferrous Metal Material
The Study about Microstructure Characterization of AlCoCrTiNiCu_x High Entropy Alloy System with Multi-Principal Element
Preparation and Properties Research of Cu-2.3Ni-0.24Si Alloy
Numerical Simulation Software of Casting Process used for Computer Aided Instruction
Precipitate and Age Hardening Response of As-Cast Mg-8Yb-0.5Zr Magnesium Alloy
Relative Activities of Deformation Modes in AZ31 Magnesium Alloy Predicted by Mesoscopic Crystalline Model
Effects of Ca on Microstructure and Properties of Spray Deposited RE Mg-Al-Zn Alloy
Isothermal Section of the Zr-Sn-Nb System at 450 degreesC in Zirconium Rich Corner?Zr?55 at.%?
Passivator Composition of Rich of Phytic Acid Used for Brass-Strip
Effect of Rolling Process on the Microstructure of AlMgSi Alloy
Fractography Analysis on the Fracture Behavior of High Strength Aluminum Alloy
Preparation and Characterization of PbO2 on Aluminum Substrate
Effect of Ultrasonic Cavitation Acting on Solidified Structures of 7050 Aluminum Alloy
Effect of Additives on the Expansion Behavior of Alumina-Spinel Castables
Effect of Ultrasonic Field on Centerline Segregation of Cast Aluminum Alloy 7050 Ingots
Long-Time Thermal Structural Stability Study on NiCr20TiAl Alloy
Effects of Homogenization Treatment on Microstructure and Properties of Mg-Zn-Nd-Cd-Zr Alloy
Behaviors of the Zr-1.0Sn-0.39Nb-0.31Fe-0.05Cr Alloy at High Temperature
Thermodynamic Analysis of the Reduction of Na2WO4 through the Mechanochemical Reaction
Experimental Study on Solidification of Copper-Iron Alloys during Wedge-Mold Casting
Corrosion Behavior of Anodic Films Formed on Aluminium 7A04 Alloy in Boric/Sulphuric Mixed Acid and in Chromic Acid
The 3d Electrons and Microdefects in Binary Ti-Al Alloys Studied by Positron Annihilation
Research of Mo Powder's Densification during Sintering
Chapter 2: Iron and Steel
Mechanisms for Enhancing Strip Flatness in Temper Mill and their Application
Analysis on Primary Recrystallization Characteristics of High Permeability Grain-Oriented Silicon Steel by Inherent Inhibitor Method and Acquired Inhibitor Method
The Electrochemical Behavior of Electrolytic Tinplate
Effect of Deformation Degree and Diameter Ratio on Performance of Hadfield Steel during Cold Asynchronous Rolling
Effect of Stress on the Corrosion Behaviors of X70 Steel in NaHCO3/NaCl Solution
Microstructure and Mechanical Properties of X80/X100 High Deformability Pipeline Steel
Ageing Precipitate Strengthening of Cu-Containing Structural Steels
Determination of Optimal Coiling Temperature and Cold Reduction Ratio of 260MPa Grade High Strength Nb-IF Steel
Effects of Zn(OH)2 on Corrosion Behavior of Hot Dipped Zn Coating in Freshwater
Effect of Texture on Secondary Work Embrittlement of IF Steels
Microstructure Evolution in Low-Carbon Bainitic Steel during Tempering
Characteristics of Rust Layers Formed on Carbon Steel in Seawater
The Effect of Mechanical Properties of 2.0% Vanadium Ductile Iron after Double Quenching Method
Analysis on Tensile Properties of Stainless-Steel Fiber and Yarn Quality
650 degreesC Long-Term Structure Stability Study on 18Cr10NiNb Heat-Resistant Steel
Effect of H2S/CO2 Pressure on the Corrosion Behaviors of L360QCS in the Environments Containing Elemental Sulfur
Effects of Electric Pulse on Solidification Process of Fe-C-S Alloy Treated with RE
Effect of Solution Treatment Time on Microstructure and Martensitic Transformation Point of C250 Steel
Influence of Allotriomorphic Ferrite under Different Growth Modes on the Variant Selection of Bainite in a Low Carbon Steel
Researches on the Behavior of Carbon and Sulfur Segregations of 82B Billet
The Influence of Heat Treatment on Microstructure and Properties of 00Cr15Ni7Mo2Cu2 Supermarteniste Stainless Steel
Inclusion Removal at the Free Surface of Steel Bath by Bubble Flotation
High Temperature Mechanical Property and Microstructure Study of Micro-Alloyed Q345B Structural Steel
Microstructure and Mechanical Properties of 60Si2Mn Steel after Austenite Inverse Phase Transformation by Sub-Temperature Quenching
Study on Microstructure and Mechanical Properties of Newly Developed High Carbon Fe-Mn-Cu-C TWIP Steels
High Temperature Deformation Behavior of 25Cr5MoA Nitriding Steel
Influences of Microstructure and Texture on Toughness of Acicular Ferrite Pipeline Steel
Study on Damping Capacities of Nodular Cast Iron Dense Bar Produced by Horizontal Continuous Casting
Effects of Different Manganese Content on Microstructures and Properties of TWIP Steel
The Processing, Microstructure and Mechanical Properties of Low Alloy Wear Resistance Steels
Microstructure and Texture Comparison of an Acicular Ferrite Pipeline Steel with Different Hot Rolling Process
Orthogonal Test on Heat Treatment Parameters of Modified Low Chromium White Cast Iron
Mechanical Properties and Microstructure of SS400 Friction Stir Welds Pursuant to Welding Distance
Chapter 3: Composites
Characteristics of NEPE Propellant with Ammonium Dinitramide (ADN)
Self-Supporting Electrode Based-on SWNT Paper for Supercapacitors
Optimisation of Manufacturing Conditions of Carbon Fibre Reinforced Polyetherketoneketone (PEKK) Composite
Effect of Hot Rolling Deformation on Superplastic Deformation Behavior of TiNP/2014Al Composite
Preparation and Characterization of Monocrystal Nano-Sliver Lamella
The Physical and Mechanical Behavior of Hot Press Mould WPCs
Ni-Coated Carbon Nanotubes/Mn-Zn Ferrite Composite as Viable Microwave Absorbing Materials
Microstructure Modeling for Prediction of Thermal Expansion Coefficient of Plain Weave C/SiC Considering Manufacturing Porosities
The Research on Polyxymethylene Silicon Oxide Whisker Polybasic Thermal Stabilizes Composite Material
Synthesis and Characterization of Hybrid Polymer PAFC-CPAM
Effect of Sintering Temperatures on the Reaction-Bonded Si3N4/SiC Composite Ceramics
Formation of Decarbonization Layer and its Effect on Corrosion Resistance of Zirconia Graphite Materials
Synthesis and Structural Characterization of Oleic Acid Embedded Layered Magnesium Borate
Preparation of AlN-ZrO2(Ca) Composites by Hot Pressed Sintering
A Study on the Tensile Strength of the Layer Splice Laminates
Preparation and Recognition Properties of Levodropopizine Molecularly Imprinted Composite Membranes
Synthesis and Characterization of Temperature-Sensitive TSPU/PNIPAAm Semi-IPN Polymer
Anodic Surface Treatment on Carbon Fibers - The Effect on Microstructure of Pyrocarbon Matrix during Chemical Vapor Deposition
Study on the Reinforcement of Aluminum Alloy A356 Using SiC Particles by Mechanical Stirring
Mechanical Properties of Sandwich Structure Composites
Preparation and Properties of CNTs-Ti3Al/B4C Composites
Preparation and Properties of Bagasses Cellulose Microcrystal Reinforced Poly(Vinyl alcohol) Composite Film
Experimental Investigation on Rubberized Concrete Mixed Proportion Design
Research of Aluminum Sheet Encapsulated by Organic Silane Acrylate Resin and Tetraethyl Orthosilicate
Ar Plasma Modified Multiwalled Carbon Nanotubes/NiFe2O4/Polyimide Nanocomposites
Effects of Alloys on Microstructure and Properties of Mo2FeB2-Based Cermets
Mechanical and Ablative Properties of Polyacrylonitrile(PAN)/RTV Silicone Internal Insulating Composites
Preparation and Properties of Polyvinylpyrrolidone / Zinc Oxide Composite Nanofibers
Performance of Polypropylene Composites Filled by Calcium Carbonate Whiskers
Microstructure Evolution and Mechanical Properties of Mg2B2O5 Whiskers Reinforced AZ31B Magnesium Composites Extruded at Elevated Temperatures
Study on Microstructure of Vanadium and Chromium-Carbide Reinforced Fe Matrix Surface Composite
Influence of Dispersant on the Dispersion Stability of Nano-CoFe2O4 Refrigeration Oil
Research on the Fiber Breakage Damage in Fiber Reinforced Polymer Laminate
Preparation and Characterization of a Novel Flame Retarded MCA-PA6 Resin by In Situ Polymerization
Effect of Sintering Temperature and Particle Size on Porous SiC/Si3N4 Composite Ceramics
Effect of Surface Treatment on the Mechanical Property and Micro-Structrue of Polypropylene/Attapulgite Composites

In Situ Polymerization Approach to Magnesium Hydroxide-Reinforced PA6 Composites
Effects of Accelerated Aging Period of Time at 150 degreesC on Tensile Strength of 3-Dimension-4-Direction Braided/Epoxy Resin Composites
Investigation of Phase Composition and Microstructure Characterization of the B4C/BN Composites Fabricated by Hot-Pressing Process
Effect of High-Temperature Heat Treatment on Mechanical Property of Cr-Geopolymer Composite
Properties of Jute Fibers Reinforced Friction Materials
Generic Geometric Model for 3D Woven Interlock Composites
The Influence of Clay-Like Sepiolite on the Structure and Properties of Polyurethaneurea/Sepiolite Nanocomposites
The Application Finite Element Analysis with the Temperature Field Simulation of Flame-Retardant Effect on OMMT and APP for PP/PA6 Composts
An Experimental-Numerical Approach of the Metallic Insert in CFRP/Honeycomb Sandwich Structures under Normal Tensile Load
Chapter 4: Micro/Nano Materials
A Novel Nonionic, Multi-Surfactant System and Separation Method for the Synthesis of Active Carbonic Anhydrase Nanoparticles
Low Temperature Combustion Synthesis and Characterization of Pr-CeO2 Doped with Zr Red Ceramic Pigments
Influences of Tm and N Doping on Surface Properties and Photoactivities of Anatase-TiO2 Nanoparticles
Controlled Synthesis of Water Soluble Silver Nanoparticles and the Molluscicidal Effect
Fabrication and Characterizes of TiO2 Nanomaterials Templated by Lyotropic Liquid Crystal
Fabrication, Optical Properties and SERS Spectra of Silver Semishells Arrays
Agglomeration Eliminating Antimony Doped Tin Oxide (ATO) Nanoparticles by Different Drying Methods
Morphology Evolution during Annealing and Electrical Conductivity of Titania Nanotube Films
Synthesis and Microwave-Absorbing Properties of Ni-Carbon Sphere Composites
Micromechanical Analysis of Single-Fiber Pull-Out Test of Fiber-Reinforced Viscoelastic Matrix Composites
Microwave Synthesis of Nano-Titanium Carbide
Study of Oxidation Behavior of Zn Nanoparticles
Hydrothermal Synthesis and Property of Rare Earth of Fluoride NaYF4:Er3+ Materials
Discussion on Micro-Structure and Transport Properties of Carbon Micro-Coil
Preparation of Nanometer Ferric Oxide Powders from Ferrous Sulfate by Improved Hydrolysis Method
Morphology and Optical Properties of Nickel Oxide Nanostructure from Aqueous Solution
Controlled Synthesis of Two-Dimensional Networked Gold Nanowires and Microkites by Sodium Carboxymethyl Cellulose-Surfactant Soft Template
Stability of the Vanadium Oxide Films Forme by Reactive Sputtering and Ion Beam Enhanced Deposition Methods
Preparation for Nano-NiO by Electrolysis of Nickel in HOCH2CH2OH Solution
Study on the Preparation and Performance of Epoxy Resin/AlOOH Nano-Composite Materials
Effect of Polyacrylamide Hydrogels on Synthesis of Hollow Sodalite Spheres
Study on the Preparation and Properties of Copper Nanoparticles and their Nanofluids
Purification of Carbon Nanotubes by Microwave Technology
The Antifriction Properties of Ultra-Fine Serpentine Powders as Lube Oil Additive on Iron-Based Friction Pair
Magnetoresistance and Exchange Bias Effect of (Co2MnSi)1-X-(NiO)X Nanocomposites
Synthesis of Mesoporous Nickel Phosphate with Long Hollow Nanotubes
Optical Properties Characterization of InGaN/GaN near UV Photodetector with Surface Nano-Structure Fabricated by Nano-Imprinting
Hydrothermal Synthesis of Neodymium Orthophosphate with Controlled Structure and Morphology
Effect of Characteristic Size on the Effective Thermal Conductivity of Anodic Aluminum Oxide (AAO) Porous Thin Films
Synthesis of Lipid-Quantum Dots and the Fluorescence Resonance Energy Transfer of Quantum Dots in Lipid Bilayer
Research Progress in Application of the Functional Ordered Microstructures
Electrochemical Corrosion Behavior of Cu-20Fe-12Cr Alloys with the Different Grain Size in Solutions Containing Chloride Ions
Preparation and Photocatalytic Property of TiO2/C
Synthesis with Microwave-Assisted Sol-Gel Method and Photocatalytic Activity of Quantum-Sized TiO2 under Solar and Ultraviolet Irradiation
Preparation of High-Purity ?-Alumina by Oil-in-Water Microemulsion
Preparation of Ordered TiO2 Macroporous Membrane Using PBMA Colloid Crystal as Template
Preparation and Microstructure of Al-Intercalated Vermiculite
Fabrication and Performances of Titanium-Grafted Microencapsulated Phase Change Materials
Hydrothermal Synthesis of Calcium Borate Whiskers
Preparation of Nanometer-Sized Nickel Oxide by Hydrothermal Decomposition
A Novel Gold Nanoparticle/Poly(AMPS-co-HEMA) Composite Hydrogel for Selective Catalysis
Effect of Stacking Fault Energy on the Mechanical Properties of Cold-Rolling Cu and Cu-Al-Zn Alloys
Uiformly-Sized, Molecularly Imprinted Polymers for Naproxen by Precipitation Polymerization
Preparation and Thermal Stability of Micro/Nano Silicone Rubber Particles
Study on Preparation and Photocatalytic Performance of Co-Doped TiO2 with Cu and Ce
Gas Response for Ethanol of SnO2 Nanorods as Sensing Materials
Prepare Uniformity Superfine WO3 by Spray Drying
Morphological and Magnetic Characteristics of Strontium Ferrite Micro- and Nanofibers
Microwave Assisted Eletroless Copper Plating on Carbon Nanotubes
Syzygium Samarangense Leaf Mediated Biosynthesis of Gold Nanoparticles and its Application in Catalysis
Molecular Dynamics Simulation of Nanoindentation on Diamond Crystal [100] Surface
Preparation and Characterization of Titania Porous-Nanotube Arrays with a High Growth Rate on Flexible Stainless Steel Substrate
Shape Modification of Net Shaped CuO and Cu Nano Particles for a Percolation Threshold Using a Chelating Agent
Dealloying Behavior of Al-Cu-Sn Ternary Alloy in an Alkaline Solution
Chapter 5: Ceramic
Effects of Doped Cu, Mn on Electrical Properties of SrTiO3-Based Varistor Ceramics
Synthesis of Al4SiC4 Powders from Kaolin Grog, Aluminum and Activated Carbon as Raw Materials
The Influence of Cu on the Electrical Properties of Ti(C, N)-Based Cermets
Effects of Ion Doping at Different Sites on Electrical Properties of Ferroelectric Bi4Ti3O12 Ceramics
Effect of Ferric Oxide Addition on the Performance of MgO-Al2O3 System Materials
Fabrication of MgO-SiC Refractory Composite Powders by High-Silicon Magnesite and Carbon Black Powders
Synthesis of Al4SiC4-Al8SiC7 Composite Powders by Carbothermal Reduction Process
Preparation of A14SiC4 by Solid-State Reaction
Influence of Heat Treatment Process on Properties of Polycrystalline Alumina Fiber
Process Factors Using Centrifugal Spray Drying to Prepare Bauxite Microspheres
Research on the Sinterability of MgAl2O3/SiC Composites in Air Atmosphere
Synthesis of MgAl2O4-SiC-C Refractory Powders by Using Forsterite, Alumina and Carbon Black
Effect of Sintering Atmosphere on the Dielectric Properties of BaTiO3 via Boron-Addition Liquid-Phase Sintering
Effect of Praseodymium Salt on Properties of Anodic Aluminum Oxide Films
Preparation and Hydration Resistance of MgO-MgAl2O4 Composite Refractory
Preparation of the System of BaO-MgO-Al2O3-TiO2 Acid-Resistant Fracturing Proppants
Synthesis of Ce0.8Nd0.2O1.9 Nanocrystalline Powders by Low Temperature Combustion Process
Effect of Processing Parameters on the Properties of Glass-Ceramics from Arc-Melting Slag of Incineration Fly Ash
Magnetite and Anti-Microbial Properties of Ag2O-CaO-Fe2O3-SiO2 Glass-Ceramic by Sol-Gel Method
Chapter 6: Optical/Electronic/Magnetic Materials
Effect of Annealing Atmosphere on Structure and Properties in Chemically Deposited PbS Thin Films
Microwave Absorbing Performance and Infrared Emissivity of Co-Doped ZnO
Optical Properties of Two Novel Terbium Thermo-Sensitive Poly(N-Isopropylacrylamide) Gels
Magnetization Reversal in Ferromagnetic Thin Films
Syntheses, Crystal Structures and Luminescence of Two Coordination Polymers Based on Isophthalic Acid and 2-(3-Pyridyl)benzimidazole Ligands
Synthesis and Fluorescence Switching of a New Purple Photochromic Diarylethene
Mixed-Phase Crystallization and Visible Fluorescence in Rare-Earth Ions Doped Germanate Glass-Ceramics
Studies of 3d Electrons and Hyperfine Interactions in Ordered and Disordered Fe50Al50 Alloys
Gamma Irradiation Effect on Load-Deflection Curve of Semiconductor Package
Molecular and Crystal Structure Analysis of an Oxalate-Bridged Sodium 2D Polymer: [Na(?1,1,2,3-Oxalato)(di-?1,1-H2O)]N
Synthesis and Luminescent Properties of Y2O3:Eu3+ Nanocrystal by the Ultrasonic Method
Highly C-Axis Oriented Barium Titanate Ferroelectric Films Deposited on SrTiO3 Substrate Using an Off-Axis Sputtered Conductive Oxide Layer as Bottom Electrode
Effect of Eu3+ on Spectroscopic Properties and Energy Transfer in Er3+/Eu3+-Doped Ga2O3-GeO2 Glass
The Research about the III-Nitride Compounds Epitaxially Grown on Si Substrate
Synthesis, Photochromism and Optical Storage of a New Type of Diarylethene Compound
Preparation of Magnetic Fe3O4 Nanoparticles by Microbial Reduction Combining Natural Oxidation Method
Investigation on the Morphologies of Dislocations in Sapphire Crystals
The Dielectric Tunability of Fe-Doped Pb0.3Sr0.7TiO3 Thin Films Prepared by Sol-Gel Method
Synthesis and Photoluminescence Properties of Doped Europium Complexes with 2-Pyrazinecarboxylate
Photoluminescence Properties of Sm3+-Doped La2O3 Powders
Electrochemical Synthesis and Photovoltaic Properties of Polythiothene/CdSe Double Layers Electrode
Synthesis and Luminescent Properties of M2P2O7:Eu3+ (M = Ca, Sr, Ba ) Phosphors
Luminescence Properties of Er3+/Tm3+-Doped Ga2O3-Bi2O3-PbO-GeO2 System Glasses
Synthesis, Characterization, Room Temperature Fluorescence and Phosphorescence Properties of Complex Gd(C5H8NO3)2(C3H5N2)2Cl3*3H2O
Influence of Al Substitution on Magnetocaloric Effect in La0.8-XAlXCe0.2Fe11.4Si1.6 Compounds
Spectroscopic Properties of Er3+-Doped Ga2O3-GeO2-Bi2O3-PbO Glass
Electrochemical Synthesis of POT for Electrochromic and Solar Cell Materials
Influence of Fabrication Process on Magnetic Properties of Co-Finemet Nanocrystalline Powder Core
Effects of C Addition on Glass-Forming in FeCPSiBMoMn Bulk Metallic with Good Soft-Magnetic Properties
Structure and Luminescence of Ba3MgSi2O8: Eu2+, Mn2+ Phosphors
Blue Upconversion Luminescence Properties of La2(WO4)3:Yb3+/Tm3+Phosphor
A New Fluorescent Material of Zn (II) Complex with 1-Acetyl-2-Naphthol-4, 4'-Diaminodiphenylmethane
Preparation and Characterization of Light-Color Conductive Composite Based on Talc
Study the Effect of Junction Temperature on the Peak Wavelength in GaN-Based High-Power Green Light Emitting Diodes
Efficient Synthesis and Properties of a Photochromic Hybrid Diarylethene Bearing a Isoxazole Moiety
Synthesis and Magnetic Properties of Poly(Schiff Base) Complex Containing 4,7-Disubstituted-1,10-Phenanthroline
Hardness Variation of Ball Bond Wire Bonding
Chapter 7: New Functional Materials
Synthesis, Properties and Application in Optical Memory of a Novel Photochromic Diarylethene Bearing an Anthracene Ring
The Effect of Hyperbranched Polymers on the Dyeing Properties of Polypropylene Fibers
Study on the Wear Properties and Wear Mechanism about TC4 and G3 Alloy Tubing Steel in Dry Condition
The In Vitro Degradation Kinetics of Polyurethane Prodrug Materials
Study on the Properties of Mesogenic Monomer Exhibiting Blue Phase and Synthesis of Side-Chain Liquid-Crystalline Polysiloxanes
Effects of Coal on the Structure and Properties of Coal/LDHs Composites
The Best Solution for Removal of Iron and Oil from Hot Condensed Water
The Research on the Surface Topography of Diamond Crystals at High Pressure and High Temperature
A Novel Method for Preparation of Antimicrobial Cellulose Textile by Surface Carbamatization and N-Chlorination
Simulation of GaAs/AlxGa1-xAs/InyGa1-y As Double-Barrier Resonant Tunneling Structures
Ordered Langmuir-Blodgett Films of Novel Sandwich-Type Heteroleptic (Porphyrinato) (Phthalocyaninato) Europium Complex
?-Fe /Nd2Fe14B Nanocomposites for Electromagnetic-Wave-Absorber in GHz Microwave Frequencies
Synthesis, Photochromic Properties and Application in Optical Memory of a Diarylethene Based on Pyrrole Ring
Cation-Exchange Membranes Prepared by Pre-Irradiation Grafting of Acrylic Acid and Sodium Styrene Sulfonate onto ETFE Membranes
Synthesis and Optical Property of an Asymmetric Photochromic Diarylethene Derivative Bearing Benzofuran
Synthesis and Properties of a New Photochromic Compound Bearing Isoxazol Moiety
The Surface Modification of Silica with Vinyltriethoxysilane
Synthesis and Photophysical Properties of Red-Emitting Iridium ??? Complex Bearing Benzothiazole
Synthesis and Adsorption Properties of Ethylenediamine Modified Chitosan/Nano-Iron Magnetic Microspheres
Preparation, Characterization and Photocatalytic Activities of ZnO/TiO2 Nanotube Composites
Effects of Hydrolyses on Lanthanide Inorganic-Organic Luminescent Materials
The Research on Microstructure of Catalyst and Growth Mechanism of Boron-Doped Diamond
Non-Dopant Electroluminescent Devices Based on Benzoxazinone Derivative as Strong Fluorescence in Solid Film
Preparation of RHA-Paraffin Phase Change Materials
Effect of Rare Earth Composite Refiner Agent on Decolorization and Fining of the Floating Glasses
Drug Release Characteristics of P(AA-co-DMAA)/SA Interpenetrating Polymer Network Hydrogels
The Luminescence and Energy-Transfer of Ce3+, Tb3+ Activated Sr3B2O6
Study on the Perfect Dislocation in Cd0.9Zn0.1Te Single Crystals by HRTEM
Synthesis, Photochromism Properties of a Novel Hybrid Diarylethene Based on Hydroxyl Group
Research on Thermal Conductive and Insulating Material Based on Phosphoric Acid Adhesive
Chapter 8: Environmental Friendly Materials
Influence of Lime Dust on Chloride Binding Capacity of Fly Ash-Cement Paste
Study on the Optimal Formula of Lubricant with Uniform Design
Evaluation of Relationship between Innitial Current, Conductance, Chloride Diffusion Coefficient and Charge Passed of Concrete
Synthesis of Cordierite from the High-Alumina Fly Ash and Talc Powder Mixtures
A New Ecofriendly Cold Ramming Paste for the Aluminum Electrolysis Cell
Influence of Foaming Agent on the Properties of High Density Foam Concrete
Thermal Characteristics of PCMs - TH29 in Building Energy Storage
Different Constructed Wetland Substrates and their Applications
Preparation and Adsorption Properties of PDMDAAC Modified Bentonite
Effect of Polymer Content to Mechanical Properties of Fly Ash Slurry
Real-Time Monitoring of Rebar Corrosion in Concrete
Study on the Heterojunction Photocatalyst Nb2WO8/ZnO Prepared by Ball Milling Method
The Effect of Surfactant and Alkali on the Surface Tension of Simulated Solutions of Alkali Activated Slag Cement System
Properties of Concrete Containing Scrap-Tire Chips
Preparation and Characterization of PP-PVA Blends and Controlled Release System Comprising Bensulfuron-Methyl
Study on Properties of Cottonseed Protein Plastics
Numerical Analysis Programming on the Concrete Elastic-Plastic Behavior
Study on Stability of AgI/TiO2 Visible Light Photocatalysts in Solutions of Various pH Values
Effect of Stone Dust Content in Manufactured Sand on Chloride Diffusion Coefficient of Various Strength Grade Concretes
Study on the Effect of Amphoteric Bagasse Hemicellulose on Heavy Metal Adsorption
Study on Preparation and Near-Infrared Reflective Properties of NaZnPO4
A New Fiber Reinforced Composite Material Properties and Engineering Application
Grinding Aid Effect of Different Siliceous Material for Quick Lime
Effect of the Additive on Thermal Conductivity of the Phase Change Material
Preparation and Cement Fluidity of Slow-Release Polycarboxylate-Type Superplasticizer
Synthesis of Polythiophene Nanoparticles by Microemulsion Polymerization for Photocatalysis
Effect of Electric Field on Cation Migration and Electrode Reactions of Mortar with Different W/C Ratios
Sol-Gel Transition Kinetics of Konjac Glucomannan Dilute Solution by Fluorescence Technique
The Influence of the Combustion Atmosphere on the Desulfurization Characteristics
Study on Photocatalysis Degradation of Phenol by Using Tourmaline/ TiO2 System as Catalyst
Microwave-Assisted Synthesis of Corn Starch-Graft-Poly(AM-DADMAC)
Research on the Performance of an Eco-Friendly Nitrogen Organic Boric Acid Ester Antirust Additive
Influence of the MB Value of Manufactured Sand on the Mechanical Property of Concrete
Study on Phenolic Resin Modified Magnesium Oxychloride Cement
Adsorption of Dyes from Acidic Wastewater by Crosslinked Chitosan Resin
Preparation and Mechanical Properties of Cotton Stalk Bast Fibers Reinforced Polylactic Acid Biodegradable Composites
Preparation and Flame Retardancy of Unsaturated Polyester Resin Containing P-Toluenesulfonate-Pillared Layered Double Hydroxide
Study on the Synthesis and Characterization of a Novel Phosphorus-Nitrogen Containing Intumescent Flame Retardant
1 Year Long Term on Strength Properties of Pozzolanics Local Soil Bricks
Preparation of Activated Carbon Fiber Supported Nanoscale Fe0 for Simultaneous Adsorption and Dechlorination of Chloroform in Water
Fenton-Like Mineralization of Anion Surfactant by Fe2O3/Attapulgite Catalyst
Chapter 9: New Energy Materials
Influence from Covering TiO2 Nanoparticles with Dense Films upon Electron Transport in Dye-Sensitized Solar Cells
Investigation of Ni-Mo-P Coating Electrodeposition under Stabilized Magnetic Field and its Hydrogen Evolution Activity
Study on Pt-SnO2/C Electrode Prepared by Different Content of Nafion for New Direct Ethanol Fuel Cells
Electrochemical Performance of Polypyrrole/Multi-Walled Carbon Nanotubes Composites for Supercapacitors Electrodes
Enhanced Hydrogen Storage Kinetics of Melt Spun Nanocrystalline and Amorphous Mg2Ni-Type Alloy by Substituting Ni with Co
Fabrication and Photocatalytic Performance of Bi2O3 Doped with Fe3+
Study on Photoelectrochemical Performance of ZnO Nanotube /CdSeQuantum Dot-Sensitized Solar Cell
An Excess Heat Phenomenon Triggered by Pressure in a H-Pd Gas-Loading System
Effect on Hydrogen Evolution Properties of PtCuLaOX Membrane Electrode by Oxygen Flow and Acid Treatment
Effect of Several Reagents on Photocatalytic Decolorization of Methyl Orange in Bi2O3 Suspension Systems
Effect of Synthesis Conditions on the Structure and Electrochemical Properties of LiNi1/2Mn1/2O2 by Sol Gel Method
Facile Synthesis of New Nanocomposite Based on Cobalt Oxide and Carbon Nanotubes with Excellent Electrochemical Capacitive Behavior
Preparation and Characterization of Three Dimensional Sn-Co Alloy Based on Porous Ni for Lithium-Ion Batteries
Enhanced Electrochemical Hydrogen Storage Characteristics of Mg2Ni-Type Alloy by Substituting Mg with La
Preparation of Tin Nano-Spheres Film Anode Based on Copper-Nickel Nano-Pillars for Lithium Ion Batteries
Dry Water: a Prospective Material for Methane Storage via Clathrate Hydrate Form
Photoelectrical and Photovoltaic Peroperties of n-ZnO/p-Si Heterojunction
Preparation of Tris(8-Hydroxyquinoline-5-Sulfonic Acid) Iron(III) Complex and Photocatalytic Property of Surface Modified TiO2
Effect of Synthesis Temperature on Structure and Electrochemical Properties of Nano-Sized Li4Ti5O12 by Self-Combustion Method
Synthesis and Performance of LiCo1/3Mn1/3Ni1/3O2 Cathode Material for Lithium-Ion Battery
Influence of Citric Acid and Calcination Temperature on Microstructure of the Nano Precursors of La-Mg Hydrogen Storage Alloy
Effect of Temperature on Anaerobic Fermentation of Banana Stem Residue
Preparation of Layered K4Nb6O17 and its Photocatalytic Activity for Hydrogen Production
Controlled Crystallization Synthesis of Porous FePO4?3H2O Micro-Spheres for Fabricating High Performance LiFePO4/C Cathode Materials
Surface Modification of LiCo1/3Ni1/3Mn1/3O2 with LaF3 for Lithium-Ion Batteries
Study on a Cd-Fe Redox Flow Battery in a Sulphuric Acid Electrolyte
Three Reductions Used in Preparation of the Silver Nano-Particle for Crystalline Silicon Solar Cell and its Characterization
Chapter 10: Biomaterials
Castor Oil and Microcrystalline Cellulose Based Polymer Composites with High Tensile Strength
Evaluation and Optimization of The Factors Affectiing Enzymatic Hydrolysis of Silk Fibroin
Appraisal about Stainless Steels for Piercing Jewelry
Preparation and Morphology of SMPU/PNIPAM Semi-IPN Microporous Membrane
Preparation of Cross-Linked Sodium Hyaluronate Gels with Different Molecular Weights of PEG and Research for its Viscoelasticity and Enzyme-Resistant Properties In Vitro
Effect of Negative Poisson's Ratios of Auxetic UHMWPE on the Contact Mechanics in Artificial Hip Joint Replacement
Effect of Pretreatment Process on Thermal Oxidation of Biomedical Grade Cobalt Based Alloy
Experimental Investigation on the Lipid-Lowering Activity of Three Novel Antilipidemic Materials In Vitro
Effect of Thermocycling on the Properties of Goat Skin Leather
Corrosion Behavior of Porous Ti-24Nb-4Zr Alloy in Different Simulated Body Fluids
Synthesis and Luminescence Properties of Tb3+-Doped Hydroxyapatites
Analysis of Monosaccharide Composition of Maize Pollen Polysaccharides
Mechanical Properties of Ti-Nb-X-CPP Biomaterial Fabricated by Spark Plasma Sintering
Research on Compound and the Best Proportion of Phase Change Materials Using in Clothes
Thermal-Oxidation Degradation of Microwave Drying Nature Rubber
Preparation and Mechanical Properties of Zirconia-Mullite Nano-Comoposites from TiO2-Doped Si-Al-Zr-O Amorphous Bulk
Chapter 11: Materials Forming and Machining
Effect of Low-Voltage Electric Current Pulse on Semi-Solid Microstructure of Magnesium Alloy AZ91D
Deformation Behavior of Porous Ti-6Al-4V Alloy Samples Fabricated by Hot Isostatic Pressing
Development and Application on Simulation System of Plate Rolling
Influence of Cutting Parameters on Surface Characteristics for Milling Powder Metallurgy Nickel-Based Superalloy
Print Parameters Influence on Parts' Quality and Calibration with 3DP-Part I: Print Parameters Influence on Parts' Surface Topography
Research on Process Optimization of Thin-Wall Plastics Injection Based on Moldflow and Orthogonal Experiment
A Study on Forming Process of Chips during Cutting Cast Iron
Effect of Controlled Rolling on Mechanical Property and Microstructure of Nb Microalloyed H Beam
Finite Element Simulations of Working Characteristics of Solid Expandable Tubular Threaded Joint
Application of Software DYNAFORM to the Tube Forming Process with Multi-Stages
Electrode Material Effect on Electrical Discharge Machining PcBN Cutting Tool Processing
Multi-Objective Optimization by Gaussian Genetic Algorithm and its Application in Injection Modeling
Simulation of Drawing Process for Spring Seat of Spiral Step and Multiobjective Optimization
Microstructure, Properties and Work Hardening Behavior of High Strength Cold Rolled Dual-Phase Steel
Print Parameters Influence on Parts' Quality and Calibration with 3DP-Part II: Print Parameters Calibration and Contour Accuracy Control
Effect of Processing Parameters on the Hot Compressive Deformation Behavior of 20CrMnTiH
Effect of Tea Saponin on the Uptake of Cadmium by Corn from Soil
Finite Element Analysis of ?-Titanium during Equal Channel Angular Extrusion
Combined Effect of Electromagnetic Field and Grain Refiner on Microstructure of ?310 Mm 7050 Aluminium Alloy Ingot
Effects of Electromagnetic Stirring on Morphology Evolution of Primary Phase in Semisolid Alloy
Control of Pressure Fluctuations in Foamed Sheet Die's Entrance
Preparation of Fe3+/Ag+ Co-Doped Nanometer TiO2 Photocatalyst with Sol - Gel Auto-Igniting Method
Effects of Hair Fibers on Braking Friction Materials
Chapter 12: Physics and Numerical Simulation of Materials Process
Structure Analysis and Optimization of Precision Grinding Machine Bed
Simulation Analysis of Drag-Reduction Effect by Dimpled Surfaces with Quasicrystal and Crystal Lattice Arrangment
Simulation and Experimental of Magnetron Sputtering Film Thickness Distribution
Study of Solidification Microstructures of Multi-Principal High-Entropy Alloy FeCoNiCrMn by Using Experiments and Simulation
Simulation of Microstructures in Solidification of Continuous Casting Aluminum Alloy Thin Strip
Computational Simulation of Corrosion Perforation in the Oil-Tank Bottom with Cellular Automata
Research on the Optimized Tool-Path Planning of Computer Controlled Optical Surfacing
The Twinning Modes of B2-B19' Martensitic Transformation in NiTi Alloys - A Phase Field Study
Thermodynamics Analysis in the Simulation Process of ?Fe ? ?Fe Isothermal Transformation's Grain Nucleation and Growth
Study on the Pretightening Assembly Moving Beam of Open-Die Forging Hydraulic Press
Phase Field Modeling for Grain Growth of Static Recrystallization of Deformed Alloys
Crystal, Electronic and Magnetic Structure of Co and Ag Doped Rutile TiO2 from First-Principles Calculations
The Realization of Numerical Control Machining of 2D Parts Based on MasterCam FBM
Behavior Engineering for the Analysis and Verification of Processes
Numerical Simulation of Multi-Track Laser Cladding Process
Research on the Effects of Welding Sequence on Welding Residual Stress of High-Speed Train Based on SYSWELD
Numerical Simulation of the Relation between Plasma Reflection and Keyhole Dimension in the Keyhole PAW Process
Numerical Simulation of Welding for Box Beam Structure on Bogie of High Speed Train
Research Materials of Chills Effect on the Solidification Process of ZM5 Shell
Research on Methods of Sheet Blank Shape Optimization for Drawing of Complex Special-Shaped Boxes
A Pseudo Inverse Approach with Kinematically Admissible Intermediate Configurations for the Axi-Symmetrical Cold Forging Modelling
The Effects of Mn Addition on Microstructure and Properties in 6061 Aluminium Alloy
Study on Infiltration Kinetics of High Temperature Self-Lubrication Composite by Pressure Infiltration
The Simulation of the Influence of Honed Edge Radius on the Maximum Temperature in Drilling 42CrMo with K-Grade Carbide Drill Bit
Formalizing Manufacturing Process Modeling Using Composition Trees
Numerical Simulation of the Tunnel Oven with Fluent Software
Phase-Field Simulation of Directional Solidification Microstructure Evolution in a Binary Alloy
Directional Solidification Microsegregation and Concentration Analysis with Different Supersaturation
Study on Hot Processing Maps and Flow Instability of 1235 Al Alloy Treated by Different Methods of Purification
Chapter 13: Surface Engineering/Coatings
The Effect of Active Packaging Film on the Quality of Dashehari Mango Fruits
Performance Evaluation of SHY-99 Coating for Carbon Steel Water-Cooler
Effect of Brazing Clearance on Microstructure and Strength of Welded Joint of 316L Stainless Steel
Preparation and Characterization of Paclitaxel Imprinted Silica Nanoparticles
Effect of Negative Bias Voltage on Corrosion Resistance of TiN Coating Deposited by MAIP
Nb-C Alloyed Layer Prepared on TiAl Alloys by Plasma Treatments and its First-Principles Investigation
Characteristics of Surface and Interface of Mercury-Stannum Reactive Wetting at Room Temperature
Synthesis and Characterization of Lamellar Nanostructured Yttrium Films Using Lyotropic Liquid Crystalline Templates
Study on the Distribution of Macro-Particles on Films Prepared by Magnetic Field Enhanced Arc Ion Plating
Structure and Corrosion Resistance of Iron Coatings Containing Silicon Powders
Semiconducting Behavior of Organic Polymer Coating during its Degradation in 50/00 Sulfuric Acid Solution
Low Cycle Fatigue Behavior of Spray Formed Superalloy Rings
Adhesive Bonding of Glass Fiber Reinforced Polypropylene
Synthesis and Tribological Properties of MoSe2/C and MoSe2 Nanoflakes
Effect of Phase Composition and Microstructure of Oxide Scale on the Corrosion Resistance of SS400 Hot Rolled Strip
Repeated Impact Resistance of Cr-Mo Surface Alloying Layers on Ti6Al4V Alloy
Novel Electrochemical Behavior of Organic Polymer Coating in Alkaline Solution
The Study about Environmentally-Friendly Passivation Technology Process and Performance on Brass Surface
Study of Corrosion Behaviour of Molybdenum Series Coatings on Galvanized Steel
Effect of Thermal Input on Finite Element Predictions of Welding Residual Stresses
Growth Characteristics of Pulse Electrodeposition Fe-Si Layer
Study on Surface Modification of Ammonium Nitrate
Development of CVD Diamond Thin Films on Titanium Substrate and Study their Tribological Behavior
Microstructure and Oxidation of 55%Al-Zn-Si Hot-Dip Coatings Deposited on Low Carbon Steel at High Temperature
Single Layer Brushite Coating onto Stainless Steel Substrate Using Dip-Coating Technique
Effect of Pack Al Content on Growth Kinetics at 650 degreesC of Ni2Al3 Coating Layer on Nickel-Electroplated Creep Resistant Ferritic Steels
The Study of Acid Doped Polyaniline Anticorrosive Coatings
Coupled Magnetic Field Enhanced Arc Ion Plating: Process, Plasma and Deposited Film
The Tribological Characteristics of Polyimide Bonded Solid Lubricating Films under Different Lubrication Conditions
Study on W-Mo-Dy Multi-Elements Diffusion Layer
Feature-Based Volume Decomposition for Robotic Weld Deposition-Based Rapid Prototyping
Simulation on Temperature and Residual Stress Field of Laser-MIG Hybrid Welding of A6N01-T5 Alloy
Progress in Ice-Phobic Coating
Electroless Deposition of Nickel on the Surface of Silicon Carbide Crucible from Alkaline Bath
Electrodeposition and Hardness and Corrosion Resistance Propertie of Ni/Nano-B4C Composite Coatings
Tribological Properties of NiCr-Cr3C2 - Ni / MoS2 Supersonic Plasma Sprayed Coating under Different Temperatures
Electrochemical Studies on the Passivation Behavior of Cu-Ni-Fe Alloy in Borate Buffer Solution at pH 8.4
Study on Corrosion-Resisting Properties of High-Speed Arc Sprayed Zn-Al Alloy Coating in Caverns
Effect of Phosphating Technologies on Corrosion Resistance of Phosphate Coatings on 6063 Aluminum Alloy
Synthesis, Characterization and Corrosion Protection Properties of Polyaniline/TiO2 Nanocomposite
Post-Weld Oxidation Behavior of AA6061 Al Alloy
Preparation of Activated Carbon from Medical Waste
Chapter 14: Mechanical Behavior and Fracture
Formation Mechanism of Alumina Nanostrip
Model Tests Study on the Bending Properties of the External Pre-Stressed Combination Box Girders with Corrugated Steel Webs
Influencing Time Response of Nano Photoelectric on the Factors Films
Study on Mechanism of Rock Fragmentation of TBM Disc Cutter
Study on the Thermal Degradation Kinetics of Modified Chloroprene Rubber Adhesive Dedicated to Bonding UHMWPE and 45# Steel
Study on Nano-SiO2 Measured by Atomic Force Microscope
Influence of Inclusion on Fatigue Performance Evaluation of High Strength Transmission Shaft Steel
Effects of Low-Voltage Pulsed Magnetic Field and Pouring Temperature on Solidified Structure of Al-4.5%Cu Alloy
First-Principles Study on Structure and Stability of YAP Crystal
Scttering of SH-Waves by Interface Semicircular Debonded Cylindrical Lining and Linear Cracks Originating at Edge of Lining
Mechanical Properties of Carbon Cathodes during Aluminium Electrolysis
Prediction of the Tertiary Structure of ?-Glycosidase from Aspergillus niger by Homology Modeling
Critical Life Prediction of Ship-Borne Helicopter Metallic Dynamic Components Based on Corrosion Damage
Fractals and Catastrophe Analysis of Fatigue Crack Propagation for Sample by Plastic Deformation
The Cycle Measurement of Sulfur Blank Value with the CS-444 Infrared Ray Carbon Sulfur Analyzer
Study on Surface Stress Measurement of Laser Cladding Fe-Based Alloy Coating Based on Rayleigh Wave Signal Analysis
The Tribological Behaviour of Beryllium Copper Alloy QBe2 against 30CrMnSiA Steel under Sliding Condition
Application of GM Yield Criterion in Plastic Zone of Mode?Crack and Burst Pressure for Pipeline
Influence of Solution Temperature and Time on Microstructure and Properties of A357 Alloy
Discussion of the Evaluating Criterion of 400 degreesC Low Cycle Fatigue Life under Multiaxial Stress States
The Lattice Stability of Ti, Zr and Hf in an Ultra-Soft Pseudopotential Method of the First-Principles
Experimental Investigation of the Phase Equilibria of Al-Zn-Ti System in Al-Rich Corner at 400 degreesC
The Electronic Properties of Al-, P-Doped and Al, P Co-Doped Boron Nitride Nanotubes
Study on the Range of Freeze-Thaw of Surrounding Rock from a Cold-Region Tunnel and the Effects of Insulation Material
Quantitative Process Risk Analysis Based on Dynamic Simulation of Gas Gathering Process
Quantitative Analysis of the Content of Substituent Group in Difunctional Polysiloxane
Fatigue Behavior of Cast Steel ZG20SiMn under Stain Control Mode
Thermodynamic Study on CuInO2 Preparation by Solid Reaction Method
The Studies on the Thermophysical Properties of Binary Systems of Neopentylglycol and the Derives
The Cracks in the Residential Dwellings and their Treatment
Strengthen Mechanism of Hard-Drawn Cobalt-Base Elastic Alloy
Hydrogen Atom Adsorption on ?-Al2O3(0001) Surface from First Principles
Microstructure and Mechanical Properties of TiB2/Al Composites
Application of CAD/CAE/CAM Technology in Plastics Injection Mould Design and Manufacture
Fatigue and SCC Behavior of Sensitized SUS304 Stainless Steel in Pressurized Hot Water at 7.3MPa and 288 degreesC
Measure of the Photosynthetic Efficiency of the Cabbage Leaves by Using Photo-Acoustic Tomography Spectroscopy Technology
Study on Safety Assessment Methods of the Penstock of the High Head Hydropower Station Using the China Standard GB/T 19624-2004
An Optimization Method for Optimal Engineering Structure Design Combining Intelligent Optimization Algorithm and CAE Code
Recrystallization Law of Ti-IF Steel During Annealing Process
Surplus Fatigue Life Prediction of Diesel Engine Piston by the Equivalent J-Integral Approach
Electrochemical Corrosion Behavior of Different Heat-Treatment Temperature Fe-Based Bulk Amorphous Alloy
Effect of PEG on Stability of Alkalinity Silica Sol
High Velocity Impact Damage Analysis for Glass Epoxy-Laminated Plates