Engineering and Innovative Materials V

Composite Material Modeling under Drop Weight Impact Test Using Finite Element AnalysisStructural and Electrical Properties of Graphite in Polyaniline/Graphite (PANI/G) CompositesEffect of Thermal Expansion and Sonication on Mechanical Properties and Adhesive Toughness Measurement of Polymer/Graphene CompositeDevelopment Approach of Asbestos-Free Friction Material Using Flyash ParticlesStudy on Properties of Spherical Non-Metallic Explosion Suppression MaterialsThe Influence of Particles Size and Composition Variation of NiCr-CrC(20NiCr) Metal Matrix Composites Coatings Properties on Boiler Tubes ApplicationFailure Analysis of Glass/Epoxy and Graphite/Epoxy Laminates due to the Effect of Variation in Lamination Scheme and Angle of Fibre OrientationEffect of ENR Contents on Cure Characteristic and Properties of NR/ENR/EVA FoamOptimum Injection Moulding Processing Condition to Reduce Shrinkage and Warpage for Polypropylene-Nanoclay-Bamboo Fibre with CompatibilizerMechanical Characterization of Graphite and CNT Reinforced Aluminium-5083Analysis on Mechanical Property for Varied Geometry and Structure Parameters of Silicon Based Filtration Membrane for Artificial KidneySurface Modification of Bacterial Cellulose FilmEffects of Halloysite Nanotubes on the Mechanical Properties of Polysaccharide FilmsDevelopment of Porous Ti-6Al-4V Dental Implant by Metal Injection Molding with Palm Stearin Binder SystemInvestigation of Temperature and Stress Distribution on High Speed Machining of Ti6Al4V and 316L Steel Biomaterials Using Explicit Dynamic AnalysisPhase Contamination Characterization of Stepwise-Built Functionally Graded Hydroxyapatite/Titanium (HA/Ti) Sintered under Various AtmospheresTesting the Performance of a Traditional Furnace Melting Process on Bronze as the Material of GamelanResearch Extent Equilibrium of the Melt Steel before CrystallizationThe Unit for Determining the Density and Surface Tension of Metallic Liquid Alloys, Using the Sessile Drop MethodObservation of Material Flow in Friction Stir Forming for A5083 Aluminum Alloy Gear-RackEvaluation of Friction Properties of Magnesium Alloy during Hot Forging by Ring Compression TestInfluence of Process Conditions on Spangle Size of 55%Al-Zn Alloy Coated Steel SheetThe Study of Dendrite Arm Spacing (DAS) on Acoustical of Tin Bronze 20Sn Alloy as Gamelan Bali MaterialsEffect of Secondary Phase Precipitation on Impact Toughness of Duplex Stainless SteelInvestigation on Mode I Propagation Behavior of Fatigue Crack in Precipitation-Hardened Aluminum Alloy with Different Mg ContentSolidification Analysis in Permanent Mould Casting of Aluminium Alloy LM6 Reinforced Titanium Carbide Particulates Metal Matrix CompositesInvestigation of Chip and Surface Roughness when Milling AISI304 Stainless SteelCyclic Oxidation Performance of Si-Aluminide/MCrAlY Coating on Ni-Base GTD-111 SuperalloyShape Memory Effect in New Ti-Nb-Ta AlloySynthesis of La10Si6-2xBi2xO27-x as Possible Electrolyte Materials for Solid Oxide Fuel CellsDonor-Modified Anthocyanin Dye-Sensitized Solar Cell with TiO2 Nanoparticles: Density Functional Theory InvestigationPotential of Palm Oill Mill Effluent (POME) as Growth Medium for Sulfate-Reducing Bacterium in Microbial Fuel CellCharacterization of Planar Interdigital Micro Supercapacitor with PECVD Graphene as Electrodes at Low TemperatureSynthesis, Structural and Thermal Properties of Layered Perovskites SmBaMn2O5+d for SOFCs ApplicationsThe Influence of Temperature on Conductivity and Dielectric Properties of PMA/PVAc Blend with Addition of TPAI SaltProduction and Characterisation of Single and Mixed Activated Carbons from Coconut Shell and Rubber Seed Pericarp Using Microwave-Induced Chemical Activating AgentPreparation and Characterization of Single and Mixed Activated Carbons Derived from Coconut Shell and Palm Kernel Shell through Chemical Activation Using Microwave Irradiation SystemPreparation and Application of Zinc Chloride-Modified Cocoa (Theobroma cacao) Pod Husk-Based Carbon for the Removal of Acid DyesCharacterization of Nanostructured Titania and Titanate Materials Synthesized by Simple Hydrothermal MethodStudy on Band Gap Energy of F Doped TiO2 NanotubesStudy of Nano-Kaolinite Properties in Clay Liner ApplicationDynamic Characteristics of Circular and Square Graphene Diaphragm for Capacitive MicrophoneChirality Dependence of Gas Adsorption Property of Single Wall Carbon NanotubesAn Improved Technique for Chirality Assignment of SWCNTs Exploiting their (2n+m) Family BehaviorStrength and Water Absorption Rate of Concrete Made from Palm Oil Fuel AshStrength and Properties of Concrete Pavement Incorporating Multiple Blended BindersStructural Behaviour of Beam with HDPE Plastic Balls Subjected to Flexural LoadFlow Insulation Characteristics of Combined Two Cordierite Alumina Porous Plates with Free Space