Engineering and Innovative Materials V

<ul><li>Preface, Committee</li><li>Chapter 1: Development of New Composite Materials</li><li>Composite Material Modeling under Drop Weight Impact Test Using Finite Element Analysis</li><li>Structural and Electrical Properties of Graphite in Polyaniline/Graphite (PANI/G) Composites</li><li>Effect of Thermal Expansion and Sonication on Mechanical Properties and Adhesive Toughness Measurement of Polymer/Graphene Composite</li><li>Development Approach of Asbestos-Free Friction Material Using Flyash Particles</li><li>Study on Properties of Spherical Non-Metallic Explosion Suppression Materials</li><li>The Influence of Particles Size and Composition Variation of NiCr-CrC(20NiCr) Metal Matrix Composites Coatings Properties on Boiler Tubes Application</li><li>Failure Analysis of Glass/Epoxy and Graphite/Epoxy Laminates due to the Effect of Variation in Lamination Scheme and Angle of Fibre Orientation</li><li>Effect of ENR Contents on Cure Characteristic and Properties of NR/ENR/EVA Foam</li><li>Optimum Injection Moulding Processing Condition to Reduce Shrinkage and Warpage for Polypropylene-Nanoclay-Bamboo Fibre with Compatibilizer</li><li>Mechanical Characterization of Graphite and CNT Reinforced Aluminium-5083</li><li>Chapter 2: Materials for Biomedical Application</li><li>Analysis on Mechanical Property for Varied Geometry and Structure Parameters of Silicon Based Filtration Membrane for Artificial Kidney</li><li>Surface Modification of Bacterial Cellulose Film</li><li>Effects of Halloysite Nanotubes on the Mechanical Properties of Polysaccharide Films</li><li>Development of Porous Ti-6Al-4V Dental Implant by Metal Injection Molding with Palm Stearin Binder System</li><li>Investigation of Temperature and Stress Distribution on High Speed Machining of Ti6Al4V and 316L Steel Biomaterials Using Explicit Dynamic Analysis</li><li>Phase Contamination Characterization of Stepwise-Built Functionally Graded Hydroxyapatite/Titanium (HA/Ti) Sintered under Various Atmospheres</li><li>Chapter 3: Properties and Processing Technologies of Metals and Alloys</li><li>Testing the Performance of a Traditional Furnace Melting Process on Bronze as the Material of Gamelan</li><li>Research Extent Equilibrium of the Melt Steel before Crystallization</li><li>The Unit for Determining the Density and Surface Tension of Metallic Liquid Alloys, Using the Sessile Drop Method</li><li>Observation of Material Flow in Friction Stir Forming for A5083 Aluminum Alloy Gear-Rack</li><li>Evaluation of Friction Properties of Magnesium Alloy during Hot Forging by Ring Compression Test</li><li>Influence of Process Conditions on Spangle Size of 55%Al-Zn Alloy Coated Steel Sheet</li><li>The Study of Dendrite Arm Spacing (DAS) on Acoustical of Tin Bronze 20Sn Alloy as Gamelan Bali Materials</li><li>Effect of Secondary Phase Precipitation on Impact Toughness of Duplex Stainless Steel</li><li>Investigation on Mode I Propagation Behavior of Fatigue Crack in Precipitation-Hardened Aluminum Alloy with Different Mg Content</li><li>Solidification Analysis in Permanent Mould Casting of Aluminium Alloy LM6 Reinforced Titanium Carbide Particulates Metal Matrix Composites</li><li>Investigation of Chip and Surface Roughness when Milling AISI304 Stainless Steel</li><li>Cyclic Oxidation Performance of Si-Aluminide/MCrAlY Coating on Ni-Base GTD-111 Superalloy</li><li>Shape Memory Effect in New Ti-Nb-Ta Alloy</li><li>Chapter 4: Materials and Technologies for Fuel Cells, Solar Cells and for Energy Storage</li><li>Synthesis of La₁₀Si_6-2xBi_2xO_27-xas Possible Electrolyte Materials for Solid Oxide Fuel Cells</li><li>Donor-Modified Anthocyanin Dye-Sensitized Solar Cell with TiO₂ Nanoparticles: Density Functional Theory Investigation</li><li>Potential of Palm Oill Mill Effluent (POME) as Growth Medium for Sulfate-Reducing Bacterium in Microbial Fuel Cell</li><li>Characterization of Planar Interdigital Micro Supercapacitor with PECVD Graphene as Electrodes at Low Temperature</li><li>Synthesis, Structural and Thermal Properties of Layered Perovskites SmBaMn₂O_5+d for SOFCs Applications</li><li>The Influence of Temperature on Conductivity and Dielectric Properties of PMA/PVAc Blend with Addition of TPAI Salt</li><li>Chapter 5: Preparation and Characterization of Carbon Based Materials</li><li>Production and Characterisation of Single and Mixed Activated Carbons from Coconut Shell and Rubber Seed Pericarp Using Microwave-Induced Chemical Activating Agent</li><li>Preparation and Characterization of Single and Mixed Activated Carbons Derived from Coconut Shell and Palm Kernel Shell through Chemical Activation Using Microwave Irradiation System</li><li>Preparation and Application of Zinc Chloride-Modified Cocoa (<i>Theobroma cacao</i>) Pod Husk-Based Carbon for the Removal of Acid Dyes</li><li>Chapter 6: Nanomaterials and Nanotechnologies</li><li>Characterization of Nanostructured Titania and Titanate Materials Synthesized by Simple Hydrothermal Method</li><li>Study on Band Gap Energy of F Doped TiO₂ Nanotubes</li><li>Study of Nano-Kaolinite Properties in Clay Liner Application</li><li>Dynamic Characteristics of Circular and Square Graphene Diaphragm for Capacitive Microphone</li><li>Chirality Dependence of Gas Adsorption Property of Single Wall Carbon Nanotubes</li><li>An Improved Technique for Chirality Assignment of SWCNTs Exploiting their (2n+m) Family Behavior</li><li>Chapter 7: Properties and Application of Building Materials</li><li>Strength and Water Absorption Rate of Concrete Made from Palm Oil Fuel Ash</li><li>Strength and Properties of Concrete Pavement Incorporating Multiple Blended Binders</li><li>Structural Behaviour of Beam with HDPE Plastic Balls Subjected to Flexural Load</li><li>Flow Insulation Characteristics of Combined Two Cordierite Alumina Porous Plates with Free Space</li></ul>