THERMEC 2016
Published on 1. February 2017
Software
Digital media
2720 pages
978-3-0357-2129-4 (ISBN)
Description
This book presents the proceedings of the 9-th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2016, which took place between May 29 and June 3, 2016 in Graz, Austria, under the co-sponsorship of The Minerals, Metals & Materials Society (TMS), USA. The Conference was also under the international auspices of professional organizations from Japan, Korea, France, Italy, The Netherlands, Germany, Brazil, Austria, India, and Canada. The Conference was intended to bring together the researchers and engineers/technologists working in different aspects of processing, fabrication, structure/property evaluation and applications of both ferrous and nonferrous materials including biomaterials, and smart/intelligent materials as well as the advanced characterisation techniques. In addition to the contributed papers, the conference committee included in the final program the invited presentations by active researchers from various countries in several topic areas covered at THERMEC'2016.
More details
Other editions
Additional editions
C. Sommitsch | M. Ionescu | B. Mishra
THERMEC 2016
Book
02/2017
Trans Tech Publications Ltd
€674.70
Shipment within 10-20 days
C. Sommitsch | M. Ionescu | B. Mishra
THERMEC 2016
E-Book
11/2016
Trans Tech Publications Ltd
€211.86
Available for download
Persons
Eds. C. Sommitsch, M. Ionescu, B. Mishra, E. Kozeschnik and T. Chandra
Content
Fatigue Life Extension by Crack Repair Using Double Stop-Hole TechniqueIntermetallic Phases in New SteelsAn Artistic Approach to Thermal SprayDynamic Transformation during Plate and Strip RollingThe Role of Microstructure in Creep Strength of 9-12%Cr SteelsMicro-Mechanical Responses of Ultrafine-Grained Materials Processed through High-Pressure TorsionThe Development of Superplasticity and Deformation Mechanism Maps in an Ultrafine-Grained Magnesium AlloyRevision of ISO 27306 for CTOD Toughness Correction for Constraint LossDevelopment of Polymer-Based Composite Coatings for the Gas Exploration Industry: Polyoxometalate Doped Conducting Polymer Based Self-Healing Pigment for Polymer CoatingsAnelastic Phenomena Preceding the Melting of Pure Metals and AlloysCombined Effects of Grain Boundary Convection and Migration in Dynamic Phase TransformationsComplex Cell Physiology on Topographically and Chemically Designed Material SurfacesMetallurgical Aspects Affecting Thermomechanical Processing of Ti Based Microalloyed SteelsThermomechanical Processing of Medium Manganese SteelsDiamond Based Schottky Photodiode for Radiation Therapy In Vivo DosimetryThermo-Mechanical Training of Stainless Steels to Improve Damping CapacityDevelopment of High-Temperature Shape Memory Alloys above 673 KAdvanced Intermetallic TiAl AlloysDevelopment and Research of Low-Cost Titanium Alloys, Especially Case of JapanEnhancement of Mechanical Biocompatibility of Titanium Alloys by Deformation-Induced TransformationMagnetic Shape Memory - Polymer HybridsHardness Homogeneity in an AZ80 Magnesium Alloy Processed by High-Pressure TorsionMicrostructure Evolution and Deformation Mechanisms of Harmonic Structure Designed MaterialsA Comparative Study of Molecular Motion Cooperativity in Polymeric and Metallic Glass-Forming LiquidsDamage Initiation in Dual-Phase Steels: Influence of Crystallographic and Morphological ParametersMicrostructure and Friction Behavior of AISI 52100 and D2 Steels Subjected to Ultrasonic Nanocrystalline Surface Modification (UNSM) Technique at a High TemperatureMicrostructure Study of Nickel-Based Superalloys after Deep Cold RollingIN792 DS Superalloy: Optimization of EB Welding and Post-Welding Heat TreatmentsMathematical Model of Microstructural Evolution of Hot Rolled Wire Rods for Nb Microalloyed SteelsA Study on the Microstructural Characterization of Rene? 142 Deposited Atop Rene? 125 Processed through Scanning Laser EpitaxyCorrelations between Defect Content, Mechanical Properties and Fractographic Investigation of AlSi9Cu3(Fe) Alloy Reference CastingsInfluence of Thermal History on the Hot Ductility of Ti-Nb Microalloyed SteelsInnovative Experimental Approaches and Physical Measurement Methods for Fatigue Monitoring and Life AssessmentNovel Concepts for the Application of Magnesium Sheets and Profiles in Crash Loaded Vehicle AreasInfluence of Microalloying Elements Ti and Nb on Recrystallization during Annealing of Advanced High-Strength SteelsRegularities of Microstructure Evolution and Strengthening Mechanisms of Austenitic Stainless Steels Subjected to Large Strain Cold WorkingEffect of Temperature and Strain Rate on the Mechanical Properties of 99.5 Aluminium Rods Extruded by KOBOMiniaturized Flow-Through Bioreactor for Processing and Testing in PharmacologyMicroretina: An ?Open Source? Tool for Retinal Images AnalysisPhase Stability Study of the Shape Memory Alloy CuAl-X (X: Be, Zn, Ti, Ni, Ag and Au) by Ab Initio CalculationsPhase Constitution and Martensitic Transformation Behavior of Au-51Ti-18Co Biomedical Shape Memory Alloy Heat-Treated at 1173K to 1373KThermal Plasticity Index of Nanostructured N-Based Coatings on HSS 6-5-2 (1.3343) Tool SteelMicrostructural Investigation of Oxynitrocarburized Components Processed at Different TemperaturesNumerical Simulation of the Effects of Preheating on Electron Beam Additive Manufactured Ti-6Al-4V Build PlateDevelopment of Al-Mg-Si-(Cu) Alloys for Automotive Body Panels and the Related Ageing BehavioursOptimal Deformation Hardening in Lead Base Anodes for Copper Electrowinning for an Appropiate Working LifeGold Recovery from PCBs with Thiosulfate as Complexing AgentFriction Stir Processing at High Rotation Rates of a Magnesium Alloy: Mechanical Properties at High Temperatures and MicrostructureFracture Surface Characterisation of Friction Stir Processed Magnesium Alloy after Mechanical TestsInfluence of Dynamic Strain Ageing and Long Term Ageing on Deformation and Fracture Behaviors of Alloy 617Development and Industrial Applying on Rolling Mill 5000 of the Model of Austenite Grain Size Evolution in Nb-Microalloyed SteelsEffects of Precipitated Particles on Microstructure Evolution during Thermo-Mechanical Processing of Al-Zn-Mg-Cu AlloyAnalysis of Deformation and Internal Defect in Flat-Wedge Cross-Wedge Rolling of GH4169 SuperalloyEffects of Laser Power on Track Profile and Structure Formation during Selective Laser Melting of CoCrMo AlloyThe Observation of Austenite to Ferrite Martensitic Transformation in an Fe-Mn-Al Austenitic Steel after Cooling from High TemperatureMechanical Analyses of Welding in Practical FieldMechanical Properties of Fine-Grained and Ultrafine-Grained Ti-6Al-4V with Equiaxed and Bimodal MicrostructuresThe Effect of Final Annealing Heating Rate on Abnormal Grain Growth in a Fe-3.5%Si Steel
In Situ Characterisation of Austenite/Ferrite Transformation Kinetics and Modelling of Interphase Precipitation Inter-Sheet Spacing in V Microalloyed HSLA SteelsTensile Stress Analyses through Digital Image Correlation of Single Lap Joints of High Strength Steel and Aluminum Alloy Using Adhesive BondingAnalysis of Pre-Strain in a Hybrid Forming Process Including Stretch and Incremental Sheet FormingFatigue Crack Growth in Flow Formed INCONEL 718Modeling the Microstructural and Yield Strength Evolution of an Age-Hardenable Al Alloy for High Temperature ApplicationsMaterials Research at University of Nevada, Las VegasLaser-Induced Surface Texturing of Metal or Organic Substrates for Structural Adhesive BondingNanooxides Derived from Hydrotalcites as Catalysts for Dry Methane Reforming Reaction - Effect of [Ni(EDTA)]2- Adsorption TimeComparative Study of Optimization in Pultrusion with Pre-Heating and Die-Cooler Temperature for Improved CureDynamic Piezoelectric Behavior of Lithium Niobate at High TemperatureRelationship between the Yield Strength-Fracture Toughness Balance and the Multiscale Microstructure of a Maraging Stainless Steel for Aircraft ApplicationsPhotonic Application of Diatom FrustulesCorrelation between Aging Effects and High Temperature Mechanical Properties of the Unmodified A356 Foundry Aluminium AlloyManganese Effect on Q&P CMnSi SteelsMicrostructural Evolution and Mechanical Behavior of Low Density Fe-Mn-Al-C Steels with High Stacking Fault EnergyNanocomposites Consisting of Carbon Nanotubes and Nanoparticles of Noble MetalsMechanical Behaviour of Materials during Creep with Changing LoadsMicrostructure and Texture Evolution in Nickel during Accumulative Roll BondingAn Experimental Investigation of the Size Effects in Forming Processes of High-Purity Thin Metallic SheetsThe Microstructural Criterion for Creep Strength Breakdown in a 10%Cr Martensitic SteelSPD Processed Materials Mechanical Properties Determination with the Use of Miniature SpecimensMachinability of an Experimental Graphitised Carbon SteelEffect of Microalloying Elements on Phase Transformation, Microstructure and Mechanical Properties in Dual-Phase SteelsDevelopment of Armor High Strength Steel (HSS) Martensitic Plates for Troops CarriersPhysical Simulation of Thermo-Mechanical Processing of Ferritic-Bainitic Dual Phase (FBDP) SteelEvolution of Microstructure, Phase Composition and Hardness in 316L Stainless Steel Processed by High-Pressure TorsionInfluence of Cross Section on the Parameters for Linear Friction Welding of High-Strength ChainsDetermination of Crystallographic Orientation near a Chill Zone Using Ghost LinesCrystal Structure and Microstructure of Martensite in Ni-Mn-In Alloys and the Behavior of Variant Rearrangement under Uniaxial LoadingAccelerated Aging and Portevin-Le Chatelier Effect in AA 2024Microstructure and Mechanical Properties of Mg-6Zn-1.4Y Alloy Produced by Rheo-Squeeze Casting ProcessThe Interface Character Distribution and Intergrannular Corrosion Resistance of Duplex Stainless Steel UNS S32304The Role of the Nd/Zn Ratio on the Stability of Mg-Zn-Nd Clusters and the Evolution of Texture in Two Mg-Zn-Nd Alloys during AnnealingMicrostructural Evolution in a 9%Cr-3%Co-3%W-VNb Steel during CreepIntegrated Defect Classification in Manufacturing of Carbon Fibre Reinforced Thermoplastic Polymer Matrix CompositesPlasticity and Size Effects in High Purity Cobalt: An Experimental StudyModelling Methods of Magnetohydrodynamic Phenomena Occurring in a Channel of the Device Used to Wash out Spent Automotive Catalyst on Metallic Substrate by a Liquid MetalMicrostructure and Residual Stress in Rotary Friction Welded Dissimilar Metals of AA7020 Aluminium Alloy with 316L SteelResidual Stress Measurements on IN718 Fatigue Specimens Using X-Ray Diffraction TechniquesComponents of a Heart Catheter System for High Risk PatientsGranulation of Bulk Metallic Glass Forming Alloys as a Feedstock for Thermoplastic Forming and their Compaction into Bulk SamplesModelling the Local Microstructure Properties due to Multi-Pass WeldingLocal Residual Stress Depth Distribution in the Inner Gearing of a Case Hardened Sliding CollarThe Quantification of Galling in Forming Operations of Hot Dip Galvanized Sheet Metal under Laboratory ConditionsLightweight Titanium Metal Bipolar Plates for PEM Fuel CellsMicrostructure-Property Relationships in Medium-Mn Steels with Metastable Retained AusteniteCombination of Microstructural Investigation and Simulation during the Heat Treatment of a Creep Resistant 11% Cr-SteelCreep Tendencies of Cu-Al Thin Wires Submitted to Moderate Temperature Conditions: Influence of Intermetallic CompoundsTorsional Piezoelectric Strain in Monocrystalline ParatelluriteHigh Performance Magnesium Based Composites Containing Nano-Length Scale/Amorphous/Hollow ReinforcementsRecrystallization Behavior of Aluminum Thin Foils with Various PurityEffect of Boron Addition on Microstructure and Mechanical Properties of AZ84 Mg AlloyProgress in Titanium MachiningUnraveling the Age Hardening Response in U-Nb AlloysCasting of an Mg Alloy Clad Strip Using a Twin Roll Caster Equipped with a ScraperHigh-Temperature Deformation Behavior of (Mo0.85Nb0.15)Si2 Crystals with C40/C11b Lamellar MicrostructureReinforcing Open Cell Aluminum Foams by Amorphous Ni-P CoatingPreparation of Al72Ni8Ti8Zr6Nb3Y3 Amorphous Powder and Bulk MaterialX-Ray and Neutron Scattering Studies of the 9Ni Cryogenic Steel and its Weld JointSurface Modification of Magnesium Alloy by Shot Lining and Laser HeatingEnvironment-Assisted Cracking of Super-Elastic TiNi Alloy Depending on Solution pH and Electrochemical PotentialEvaluation of Weldability of Titanium Alloy Ti-6Al-4V and Aluminum Alloy 6061 Produced by Electron Beam WeldingMaterial and Mechanical Aspects of CMAS Damage Progression on Thermal Barrier Coatings and its Non-Destructive DetectionEffects of Electric Current on the Microstructures and Mechanical Properties of Artificial Aged 6061 AlloyInfluence of High-Pressure Torsion on the Microstructure and the Hardness of a Ti-Rich High-Entropy AlloyMagnetic Shape Memory Effect in Ni-Mn-Ga Single CrystalMicrostructure and Microtexture Evolution of Invar Alloy after Cross Accumulative Roll Bonding (CARB) Compared to ARBSurface Structuring by Pulsed Laser ImplantationInfluence of Carbon Addition on Mechanical Properties of Thixomolded Magnesium AlloyCharacterization of the Acoustic Emission Response and Mechanical Properties of Mg Alloy with LPSO PhasePhonon Excitations in Pd40Ni40P20 Bulk Metallic Glass by Inelastic X-Ray ScatteringRecovery or Non-Recovery in Al-0.1% Mg and Al-1% Mg Alloy during High-Pressure Torsion Processing
In Situ Tensile Texture Analysis of a New Mg-RE AlloyImpact of Silicon, Magnesium and Strontium on Feeding Ability of AlSiMg Cast AlloysStudy on the Porosity in Al-Zn-Mg-Cu High Strength Alloy DC IngotMicro-Scale Strength Evaluation for Bonding Interface of Cold Sprayed CoatingsThermal Conductivity and Tensile Property of Mg-Zn-Y Casting Alloys with Long-Period Stacking Ordered PhaseStress and Strain Analysis in an Fe-Ga Alloy Single CrystalEffect of Annealing upon Retention of He and H in Irradiated SiCPreparation of Mg-TM-Y (TM=Transition Metal) Alloys with Long Period Stacking Ordered Phase and their Superior Mechanical PropertiesHigh Quality TMCP Production and Metallurgy of Niobium Bearing SteelsThe Optimal Placement of Sensors by Minimizing the Maximum Probability of Non-Detection Using Genetic AlgorithmSurface Engineering of Metal Oxide Photoelectrodes for Improved Band Alignment in Solar Water Splitting CellsLong-Term Performance Analysis of Geomembrane Considering Stress Cracking ResistanceAl-5Cu Alloy Processed by Equal-Channel Angular PressingAnalysis of Thin Strip Shape and Profile in Cold Rolling: A Way to Improve Strip Profile and Mechanical PropertiesLocal Surface Phase Stability during Cyclic Oxidation ProcessProcess Parameter Optimization of Fused Deposition Modeling for Helical Surfaces Using Grey Relational AnalysisInfluence of the Processing Variables on the Microstructure Evolution of a Bainitic Carbide-Free SteelThe Effect of Sample Preparation on the Microstructure of Austenitic-Ferritic Stainless SteelEffect of Red Scale on the Bendability of Ultrahigh-Strength Strip SteelEffects of Additional Elements on Hydrogen Storage Properties for Vanadium AlloysEvaluation of Rolling Contact Fatigue by Using an X-Ray Diffraction Ring AnalyzerEffect of Electroless Ni-P Plating on Mechanical Properties of Al-4%Ge AlloyFiber Laser Beam Welding of Ti-6242 - Effect of Processing Parameters on Microstructural and Mechanical PropertiesManufacturing of Aluminum Metal Matrix Cast Composites with Carbon Based Additives for Thermal Management ApplicationsMicrostructure Evolution Induced by Sliding-Based Surface Thermomechanical Treatments - Application to Pure CopperDetermination of the Grain Coarsening Temperature in Nb Microalloyed Steels by Multiphase-Field ModelThe Effects of Ultrasonic Nanocrystal Surface Modification Technique Temperature on Microstructure and Wear of Alloy 600Microstructural Characterization and Mechanical Properties of Stainless Steel Inlay Welded Dissimilar MaterialsEffect of Large Strain on Texture Formation Behavior of AZ80 Magnesium Alloy during High Temperature DeformationEffects of Die Steel on Die Soldering of Aluminum Alloy Die CastingSynchrotron Investigation on the Precipitation Behaviour of Niobium Microalloyed SteelModeling of the Hot Rolling: Towards the Industrial ApplicabilityOn the Dynamic SuperplasticityEffect of Oxygen Potential Gradient on Mass Transfer in Polycrystalline a-Alumina at High TemperatureEBSD Analysis and Assessment of Porosity in Thermal Barrier Coatings Produced by Axial Suspension Plasma Spraying (ASPS)Structure Formation in Ni Superalloys during High-Speed Direct Laser DepositionStructures and Properties of Laser-Assisted Cold-Sprayed Aluminum CoatingsThe Effect of Boron Addition on Precipitation and Hot Ductility of 1.5Mn-0.1Nb-Ti Carbon Steels in As-Cast ConditionNew Metallurgy of Additive Manufacturing in Metal: Experiences from the Material and Process Development with Electron Beam Melting Technology (EBM)Novel Bioreactor-System for In Situ-Cultivation of Artificial TissueInfluence of Thermo- and HIP Treatments on the Microstructure and Mechanical Properties of IN625 Alloy Parts Produced by Selective Laser Melting: A Comparative StudyModelling Yield Strength in an A6061 Aluminium AlloyThe 3D Imaging and Metrology of Microstructural Elements in Innovative Materials for Clean Energy Systems and AeronauticsEffect of Layer-by-Layer Texture Inhomogeneity on the Stress Corrosion of Gas Steel TubesEffect of Prior Austenite Grain Size on Yielding Behavior of the Low-C Martensitic Stainless SteelSheet Forming Processes for AW-7xxx Alloys: Relevant Process ParametersResolving the Strength-Ductility Paradox through Severe Plastic Deformation of a Cast Al-7% Si AlloyOsteoconductivity of Protein Adsorbed Titanium Implants Using Hydrothermal TreatmentEffect of Prior Strain on Damping Capacity and Mechanical Property during Heat TreatmentWelding of Automotive Aluminum Alloys by Laser Wobbling ProcessingMechanical Properties of Polymer-Based Hybrid Films: Tailoring the Hybrid Interface Using Soft ChemistryMechanical Behavior of a Metal Matrix Nanocomposite Synthesized by High-Pressure Torsion via Diffusion BondingEffect of CH4 Content on the Characteristics of Surface Layers of Low Temperature Plasma Nitrided 2205 Duplex Stainless SteelSeparating Technology of Pure Zirconia from Zircon-Sand by the Ar-H2 Arc Plasma Fusion and the Microwave LeachingAtomic Layer Deposited Protective LayersThe Role of Preliminary Heat Treatment in the Formation of Ultrafine-Grained Structure in the Implementation of the Combined Process "Rolling - Equal Channel Angular Pressing"The Study of the Microstructure of the Metal after Rolling Thick Workpieces of Nonferrous Metals and Alloys in Relief and Smooth RollsGas Nitriding of High-Vanadium Alloy SteelMorphology Evolution of Grain Boundary Carbides in Highly Twinned Inconel Alloy 600Deep Ultraviolet Photodetector Based on Sulphur-Doped Cubic Boron Nitride Thin FilmInfluence of Cu Doping on Martensitic and Magnetic Transitions in Ni-Mn-Sn AlloysThe Effect of Process Parameters in Interdendritic-Melt Solidification Control Technique on the Microstructure and Properties of a Ni-Base SuperalloyAffinity Viscosimetry Sensor for Enzyme Free Detection of Glucose in a Micro-Bioreaction ChamberExperimental Bio-ESPI for Validation of Magnetic Induced Deformation on HeLa CellsMicrostructure of Z-Phase Strengthened Martensitic Steels: Meeting the 650?C ChallengeMorphological Evolution of Carbides in DZ125 Superalloy during Heat TreatmentQuasi-Static and Dynamic Properties of Ti-3.5Al-2.5V-1.5Fe-0.25O Titanium Alloy PlatesInvestigations on Hot Tearing Susceptibility and its Mechanism of Mg-Zn-Y AlloysAnalysis of the Static Recrystallization Behavior of Nb-Ti Microalloyed Steels Including Low Strain LevelsMacrosegregation of Alloying Elements in Hot Top of Large Size High Strength Steel IngotInfluence of Coiling on Microstructural Evolution and Mechanical Properties of Strip-Cast Low-Carbon Low-Niobium SteelPreparation and Squeeze Casting of Nano-SiCP/A356 Composite Assisted with Ultrasonic Vibration ProcessEnabling Diamond Deposition with Cold Spray through the Coated Particle MethodThe Effect of Thermo-Mechanical Coupling on Microstructures and Tensile Properties of Al-Li 2198-T8 Alloy via Friction Spot WeldingSubstituting of a Thermodynamic Simulation with a Metamodel in the Scope of Multiscale ModellingA Novel Facility to Investigate Dust Mobilization in Confined Environments with Applications to the Security of the Pharmaceutical IndustryThermal Desorption Spectroscopy Study on the Hydrogen Behavior in a Plasma-Charged AluminumMicrostructure Evolution of a Directionally Solidified Ternary Eutectic Mo-Si-B AlloyFriction Stir Welding on Light-Weight Metal - Aluminum Alloy Al6061Characterization and Modelling of the Microstructure and Texture Evolution in AlMgSi-ExtrusionsOxidation of Fe-Al Alloys (5-40 at.% Al) at 700 and 900 ?CInfluence of Niobium Content on the Hot Mechanical Behavior of Nickel AlloysEffects of Hybrid Structures on the Stress Reduction and Thermal Properties of Joints in Electronics DevicesFormation of Hydrogen by Ball Milling of Mg and Mg Alloy in SeawaterBuilding Blocks for Artificial Extracellular Matrices Based on Cross-Linkable Polysaccharide and Glycosaminglycan SulfatesEffect of Nature Chemical Linker on the Formation of a Zeolitic Layer on Zirconia SubstratesBoron Effect on Hardenability of High Thickness Forged Steel MaterialsOn the Elaboration of Metal-Ceramic Composite Coatings by Laser CladdingImpact of the Confinement on the Intra-Cage Dynamics of Molecular Hydrogen in Clathrate HydratesEffects of a+? Intercritical and ? Single-Phase Annealing on Texture Evolution in Cold-Rolled Dual-Phase Steel SheetsTechnical Challenges in Narrow-Gap Root Pass Welding during Tandem and Hybrid Laser-Arc Welding of a Thick Martensitic Stainless SteelMicrostructure Evolution during LCF of a 10%Cr Steel at Room TemperatureInfluence of Severe Plastic Deformation on Mechanical Properties of an AA5024 AlloyThermomechanical Adhesion between Metallic Glass and Die MaterialsCrystallographic Investigation of the Initial Solidification Grain Structure in Al-Si AlloyEffect of Deformation Structure on Strength of a Low Alloyed Cu-Cr-Zr AlloyFriction and Wear Properties of aAlB12-NiAl Cermet Prepared by Spark Plasma SinteringPhase Stability and Mechanical Properties of Ti-Cr-Sn-Zr Alloys Containing a Large Amount of ZrMicrostructure of Rapidly Solidified Melt-Spun Ribbon in AlCoCrFeNi2.1 Eutectic High-Entropy AlloysMisorientation Measurement of Individual Grains in Fatigue of Polycrystalline Alloys by Diffraction Contrast Tomography Using Ultrabright Synchrotron RadiationDevelopment of a New Powder/Solid Composite for Biomimic Implant Materials by Electron-Beam Additive ManufacturingMicrostructure Formation of High Pressure Torsion Processed (a + ?) Two Phase Stainless SteelInfluence of Nano Reinforcement Volume Percentage on Fabrication of Surface Nanocomposite by FSPInfluence of Flash Treatment on Pseudoelastic Behaviour of Biomedical Ti-25Nb-3Zr-3Mo-2Sn Alloy
In Situ Techniques for the Investigation of the Kinetics of Austenitization of Supermartensitic Stainless SteelMetal Matrix Composites as Environment-Friendly Protective CoatingsCharacteristic Features of the Modulated Structure Appearing in the Multiferroic Material Bi1-xSmxFeO3 around x = 0.15Iron-Water Interface under Electrochemical ConditionMgO Implanted in Rat Tibia Bone Marrow is Osteoinductive through the Formation of a Matrix, Containing HydroxyapatiteCompressive Residual Stresses and Associated Surface Modifications Induced in Ti6Al4V by Laser Shock ProcessingDeformation Microstructures and Mechanical Properties of an Austenitic Stainless Steel Subjected to Warm RollingEvolution of Microstructure and Mechanical Properties with Different Partitioning Conditions of Q&P SteelsRapid Measurement of Texture of Metals by Time-of-Flight Neutron Diffraction at iMATERIA and its ApplicationsApplication of Thermo-Calc TCFE7 to High-Alloyed Mottled Cast IronDeformation Behavior of Inhomogeneous Layered MicrostructureFundamental Aspects of Rolled Zn Alloy Sheet Formability: Structure-Property and Failure Mode RelationshipsEffect of Aluminum Content on Texture Formation Behaviors in Magnesium AlloyModeling and Simulation of Q&P SteelsExperimental Investigation of Welding Parameters on Automatic TIG Welding of Aluminium 5083 PlateModelling the Static Recrystallization Kinetics of Microalloyed TWIP Steels with Different Alloying ContentsInfluence of Initial Heat Treatment on the Microhardness Evolution of an Al-Mg-Sc Alloy Processed by High-Pressure TorsionInfluence of Second Phases on the Superplasticity of Mg-Tm-Y-CeMM Alloys Containing LPSO-PhasesThe Effect of High-Doze Neutron Irradiation on Texture and Substructure Condition of Cladding Tubes from Zr-Based AlloysEffect of High Temperature Exposure on the Mechanical Properties of Self-Hardening Al-Based AlloyEffect of Secondary Phases Precipitation on Corrosion Resistance of Duplex Stainless SteelsModeling of Grain-Boundary Mobility and Nucleation Rate during Discontinuous Dynamic Recrystallization in Ni-Nb Alloys and a High-Purity Alloy Derived from SAE 304LEvolution of Ni Structure under ECAP and DCAP and Further AnnealingCoupling of Computational Thermodynamics with Kinetic Models for Predictive Simulations of Materials PropertiesPhotolithography of 3D Scaffolds for Artificial TissueFatigue Deformation Behavior of Fe-Mn-C-(Al) TWIP SteelsA Statistical Methodology to Reconstruct Nucleation Pathways in the Fe-Cu SystemSolidification Behavior of Aluminum-Copper Based Alloy during Controlled Diffusion SolidificationAnti-Bacterial Nanocomposites by Silver Nano-Coating FragmentationSoftening Kinetics of Plain Carbon Steels Containing Dilute Nb AdditionsBiocompatible Ceramic-Biopolymer Coatings Obtained by Electrophoretic Deposition on Electron Beam Structured Titanium Alloy SurfacesNeutron Diffraction Analysis of Light Alloys: A ReviewBridging the Gap between Ab Initio and Large Scale Studies - A Monte Carlo Study of Cu Precipitation in FeInnovative Surface Treatments of Titanium Alloys for Biomedical ApplicationsLaser Pulse Simulation of High Energy Transient Thermal Loads on Bulk and Plasma Sprayed W for NFRStudy on the Formation of Stray Grains during Directional Solidification of Nickel-Based SuperalloysTexture Characterization of Stainless Steel Cladded Layers of Process VesselsEffect of Previous Grain Size on Recystallization Texture and the Formability of the Nb Ferritic Stainless SteelThe Behaviour of Graphitized Steels in Machining ProcessesA New Approach for the Spectroscopic Detection of Different pH-ValuesInfluence of Long Heat Treatments on Hardness and Tribological Behaviour of HVOF Sprayed WC-CoCr and Cr3C2-25NiCr CoatingsHot Deformation Behavior and Stability Criteria of WE54 Magnesium AlloyDevelopment of a 2.25%Cr Steel P23 Reinforced with Micro/Nano-Carbide Particles Produced by Self-Propagating High-Temperature SynthesisAge Hardening Behavior of Al-Li Alloys Produced by Sand Mold ProcessEffect of Silicide on Dynamic Recrystallization in Near Alpha Titanium AlloyManufacturing of ODS RAFM Steel: Mechanical and Microstructural CharacterizationShape Recovery of Polymeric Matrix Composites by IrradiationComparison of Microstructure and Mechanical Behavior of the Ferritic Stainless Steels ASTM 430 Stabilized with Niobium and ASTM 439 Stabilized with Niobium and TitaniumRecrystallization Kinetics and Texture Evolution of Nb Stabilized Ferritic 430 Stainless Steel Cold Rolled and Isothermal AnnealedThermal Effect during Electromagnetic Pulse Welding ProcessRe-Melting Technique with High Intense Pulsed Plasma Beams Applied for Surface Modification of Steel - Own InvestigationsEffect of Preparation Conditions of TiB2 Particle Dispersed Al Composites on MicrostructureX-Ray Stress Measurement of Austenitic Stainless Steel with cosa Method and Two-Dimensional X-Ray DetectorPhysical Modelling of Metallurgical ProcessesEffects of Particle Size on Fabrication of Al-TiO2 Functionally Graded Materials by Centrifugal Mixed-Powder MethodUsability of Ti6Al4V Powder via Hydride-Dehydride Process for Selective Laser Melting ProcessGaN Thin-Film-Depositions on Glass and Amorphous-SiO2-Layer-Deposited Si Single-Crystalline SubstratesInfluence of Different pH and Fluoride Addition on the Corrosion Behavior of the Sintered CoCr Alloy Ceramill Sintron Compared to the Cast Alloy Girobond NBLiquid Composite Molding: A Widely Used Group of FRPC Processing Techniques, but still a Challenging TopicMiniaturized Laser Power Sensor via Rapid PhototypingInfluence of Corrosive Conditions on the Mechanical Performance of Flow Drill Screw Joints between Light MetalsCalculation of the Stress Interaction between Dislocation Pile-Ups in Neighbouring Misoriented GrainsHigh-Pressure Synthesis of Skutterudite-Type Thermoelectric MaterialsDevelopment of Joining Method between Zircaloy and SiC/SiC Composite Tubes by Using Diode LaserKinetics of Submicrocrystalline Structure Formation in a Cu-Cr-Zr Alloy during Large Plastic DeformationThe Effects of Interfacial Heat Transfer Coefficient on the Microstructure of High-Pressure Die-Cast Magnesium Alloy AM60BCooling Curve Based Estimation of Mechanical Properties in High Strength Steel WeldsFeatures of Electronic States in the Highly-Correlated Electronic System Sr1-xNdxMnO3 around x = 0.50Fluctuation of Position and Energy of a Fine Particle in Plasma NanofabricationMicrostructure and Porous Defects of a Spray-Formed and Hot Worked 7000 Aluminum AlloyHot Torsion Tests - A Reliable Rolling Simulation Method for C-Mn SteelsDevelopment of a Biomimetic Metallic Femoral Stem: Methodological ApproachThe Issue of Grain Size Distribution Using Mean Field Models for Dynamic and Post-Dynamic RecrystallizationMeasurement of Residual Stresses in Linear Friction Welded In-Service Inconel 718 SuperalloyEvaluation of the Hardening Capacity of Low-Alloyed Steels Quenched by HPGQ in Vacuum FurnacesMathematical Modelling of Steel QuenchingAn Appraisal of Direct Quenching for the Development and Processing of Novel Super-High Strength SteelsEffect of Heat Treatment on the Microstructure Evolution of Ti-6Al-3Sn-3Zr-3Mo-3Nb-1W-0.2Si Titanium AlloyNb-Microalloying in Next-Generation Flat-Rolled Steels: An OverviewAdvanced Evaluation of Fatigue Phenomena Using Non-Destructive Testing MethodsThe Effects of Intercritical Annealing Temperature and Initial Microstructure on the Stability of Retained Austenite in a 0.1C-6Mn SteelMicrostructure Refinement in the CoCrFeNiMn High Entropy Alloy under Plastic StrainingNovel ESPI Measurement Prototype for Analyzing Biological Samples from Cell Culture TechniqueElectron Beam Welding of TZM SheetsSystematic Investigation of the Temperature Field in Atmospheric Plasma Processing (APP)Effect of As-Rolled Microstructure on Static Recrystallization Characteristics and Texture Evolution during AnnealingUse of Carbon Nanomaterials as a Catalyst Support in Fuel CellsEffect of the Interfacial Thermal Resistance on Effective Thermal Conductivity of Al/SiC Particle-Dispersed CompositesInfluence of ?-Mg17Al12 Phase on Initial Pitting Process of AZ91D Magnesium AlloyThe Low-Nickel Cryogenic Steel Alloyed by NitrogenThree-Dimensional Dynamic Explicit Finite Element Analysis of Charpy Impact TestMicrostructure Observations of Graphite in Gray Cast Iron Using TEMDispersion of CNTs in Selective Laser Melting Printed AlSi10Mg Composites via Friction Stir ProcessingDesign and Characterization of Conductive Biopolymer Nanocomposite Electrodes for Medical ApplicationsThermal Joining of Highly Conductive Bonds by Using Reactive Al-Ni NanofoilsRelationship between Microstructure and Mechanical Properties in Q&P-SteelsProgress in the Understanding of the Microstructure Evolution of Direct Laser Fabricated TiAlMicrostructure and Properties of Al-12.7Si-0.7Mg Alloy Extrusion after End-Quenching TestMicrostructure Evolution and Creep Properties of a Single Crystal Nickel-Based Superalloy with Various OrientationsEffect of SPD Processing Technique on Grain Refinement and Properties of an Austenitic Stainless SteelEffect of Tempering on Microstructure and Creep Properties of P911 Steel? Phase Transformation and Mechanical Properties in Binary Zr-Nb Biomedical AlloyTi-Cu-Based Amorphous Powders Produced by Ball-MillingDevelopment of the Advanced TBC for High Efficiency Gas TurbineFabrication of High Porosity Mullite Foams and their Thermal PropertiesInfluence of Thermomechanical Treatment on the Damping Capacity of Selected Magnesium AlloysEffect of ? Number of Transition Metals on the Cohesive Properties of Cr-Ni-Base AlloysReverse Transformation Behavior Induced by Shot-Peening for SUS410S Martensitic Stainless SteelNonlinear Optimization Methods for the Determination of Heat Source Model ParametersEffects of Cross-Rolling on Deformation Texture Evolution in Unalloyed TitaniumHigh-Temperature Mechanical Properties and Constitutive Modelling of Ti6Al4V SheetsEarly Instability Phenomena of IN792 DS SuperalloyEffect of Heat Treatments on TiH2: Surface Composition and Hydrogen ReleaseTexture Gradient through Thickness of a Cross Roll-Bonded AA5754/AA6061 Aluminum CompositeShock-Induced Reaction Characteristics of an Al/Ni Composite Processed via Accumulative Roll-BondingEffects of Initial Micro-Structures on Deformation Behaviors of Commercial Pure TitaniumMicrostructural Evolution of AZ31 under the Application of High Density Electric Current PulsesMartensitic Transformation and Crystal Structure Characterization of Ni-Fe-Ga-Co Ferromagnetic Shape Memory AlloysRefined and Uniform Microstructure with Superior Mechanical Properties in Medium Plate Microalloyed Steel with Reduction in Mn-Content during Ultrafast CoolingLinear Friction Welding of IN718 to Ti6Al4VElectron Beam Welding of High Strength Quenched and Tempered SteelSaturation of Deformation Twinning in Magnesium AlloysTemperature Field Evolution during Flash Butt Welding of Railway RailsEffects of Microalloy Additions and Thermomechanical Processing on Austenite Grain Size Control in Induction-Hardenable Medium Carbon Steel Bar RollingDissimilar Electron Beam Welds of Nickel Base Alloy A625 with a 9% Cr-Steel for High Temperature ApplicationsInfluence of NbC-Precipitation on Hot Ductility in Microalloyed Steel - TEM Study and Thermokinetic ModelingModification Effects of Sb on Al7SiMg Alloy Measured with Cooling Curve AnalysisNumerical Simulation of Pore Evolution of 7050 Aluminum Alloy during Hot Compression ProcessDefects and Charging Processes in Li-Ion Battery Cathodes Studied by Operando Magnetometry and Positron AnnihilationProcessing and Thermoelectric Properties of New Si-/ Se-/ Sn-Based IntermetallicsMicrostructure of Fiber Laser Deposited WC-Co Cemented Carbide and Carbon SteelEffect of Continuous Annealing Temperature on Microstructure and Mechanical Properties of a High Strength Cold-Rolled DP980 SteelFramework Structures for Mg Battery CathodesFurther Study on the Effect of Environment on Fatigue Crack Growth Behavior of 2000 and 7000 Series Aluminum AlloysCrystallographic Features of Electronic States in the Highly-Correlated Electronic System Sr1-xSmxMnO3 around x = 0.50Effect of Nitrogen on Age-Hardening of Metastable Austenitic Stainless Steel after Cold DrawingEffect of Chlorine Atoms for Development of Aluminum CorrosionInitiation and Propagation Behaviors of Small Crack in a Polycrystalline Ni-Base Superalloy under Thermo-Mechanical Fatigue LoadingCrystal Structure, Microstructure and Martensitic Transformation Path in Ni-Mn-In AlloysEffect of Grain Size on Oxidation Resistance of Unalloyed TitaniumGrain Boundary Engineering of ECAPed OFHC CopperMicrostructure Evolution of Laser Direct Metal Deposition of M2 High Speed SteelMg-Zn-Y Alloys with Long-Period Stacking Ordered Phases: Deformation, Creep, Solute Segregation and Strengthening Mechanisms at Elevated TemperaturesDeformation Behavior of Fe-Al-Co-Ti Single Crystals Containing Co2AlTi PrecipitatesEffect of Added Elements on Microstructures and Joint Strength of Lead-Free Sn-Based Solder Joint Dispersed IMC PillarCrystallographic Features of the State Appearing in the Multiferroic Material Bi1-xLaxFeO3 around x = 0.20Influence of Grain Size on Work-Hardening Behavior in 12Cr Stainless SteelEvaluation of Parameters Effect on Microstructure and Mechanical Properties in TIG Welding of A105 to A106 SteelsThe Effect of Sc Addition on Microstructure in Mg-Gd AlloysComparison of Self-Annealing Behaviors in (001)- and (111)-Oriented Electrodeposited Silver Films by In Situ EBSP AnalysisEffect of Friction Stir Welding on Microstructure of a 5024 AlloyMicrostructure and Property of Fe-Based Alloy Modified Layer on 304 Stainless Steel by High-Energy Pulse Laser-Like Cladding (HPLC)Microstructures and Properties of Aluminum Alloys during Repetitive Continuous Extrusion FormingThe Portevin-Le Chatelier Effect and Kinematics of Deformation Bands in an Al-Mg-Sc Alloy: Effect of Grain SizeEffects of Hydraulic Pressure on Shape Accuracy of Drawn Circular Cups during Micro Hydro Deep DrawingKinetics of Microstructure Refinement in Titanium Alloys during DeformationNeedle Like Fe-Containing Intermetallic Compounds of High Silicon Aluminum Alloy with Fe Modified by Mn and Ultrasonic VibrationMicrostructure and Mechanical Properties of Medium Manganese Steel Plate with High Strength and ToughnessEffect of Mischmetal Additions and Solution Heat Treatments (T4) on the Microstructure and Mechanical Properties of Thixocast ZK60-RE Magnesium AlloysDissimilar Friction Stir Welding of HSLA Steel to Austenitic High-Mn TRIP SteelEffects of Warm Working on Microstructural and Shear Deformation Properties of TRIP-Aided Martenitic SteelCharacterization of Phase Transitions Occurring in Solution Treated Ti-15Mo during Heating by Thermal Expansion and Electrical Resistance MeasurementsMicrostructure and Creep Properties of Silicon- and/or Germanium-Bearing Near-a Titanium AlloysFormation and Dissolution of Hydride Precipitates in Zirconium Alloys: Crystallographic Orientation Relationships and Stability after Temperature CyclingResearch on Microstructure Evolution in Al-9.8Zn-2.0Mg-1.8Cu Alloy during Solution TreatmentConcurrent Validity of a New Contact Mat for Estimating Vertical Jump HeightThe Use of Vibrotactile Stimulation for Improving Manual Tasks in Parkinson's Disease PatientsEvaluating Athletic Performances with a Real Time Location and Tracking SystemOtoacoustic Emissions as a Promising Diagnostic Tool for the Early Detection of Mild Hearing Impairment - Technical Advances in Acquisition, Analysis and ModelingNear Infrared Device for Tissue Inflammation EvaluationEvolution of Recrystallization Textures in Cold-Rolled Commercially Pure AluminumChange in Mechanical Strength and Bone Contact Ratio of Beta-Type TNTZ Subjected to Mechanical Surface ModificationTensile and Fatigue Properties of Miniature Size Specimens of Sn-5Sb Lead-Free SolderEffect of Sr Addition on the Solidification Structure in Al-6mass%Mg-3mass%Si AlloyAnalysis of Recrystallization Behavior of Hot-Deformed Austenite Reconstructed from EBSD Orientation Maps of Lath MartensiteSuperplasticity of Friction-Stir Welded Al-Mg-Sc Alloy with Ultrafine-Grained Microstructure Obtained by Warm Severe Plastic DeformationComplex Nano-Scale Structures for Unprecedented Properties in SteelsThe Effect of Thermomechanical Processing Temperature-Strain-Time Parameters on the Mesostructure FormationThermal Conductivity of Cubic Boron Nitride (cBN) Particle Dispersed Al Matrix Composites Fabricated by SPSLightweight Sandwich Structures in Innovative Vehicle Design under Crash Load CasesRecrystallization Twinning in Stable Single Crystals of Cu-2%Al and Al-1%Mn AlloysEffects of Magnetic Field Intensity on Carbon Diffusion in Pure Iron in Paramagnetic Ferrite RegionSolidification of Al-Pb Alloy under the Effect of Micro-Alloying Element Ti and C
In Vitro Assessment of Hydroxyapatite Coating on the Surface of Additive Manufactured Ti6Al4V ScaffoldsAging Property of AZ91D Magnesium Alloy Screw Thread-Rolled at Room Temperature Using Extrusion-Torsion Simultaneous ProcessingContinuous Modeling of Dislocation Cores Using a Mechanical Theory of Dislocation FieldsSimultaneous Precipitation and Recrystallization during Hot Deformation of Ti, Nb and V Microalloyed SteelSolid-State Bonding of 5052 Aluminum Alloy/316L Stainless Steel by Using Organic Salt Formation/Decomposition ReactionTheoretical Study of Local Electric Conductive Properties by Electronic Tension DensityInfluence of a Direct Current on the Solidification of Immiscible AlloysStereolithographic Additive Manufacturing of Ceramic Components by Using Nanoparticle Paste FeedingRevealing the Individual Hardening Effects of Twins, Dislocations, Grain Boundaries and Solid Solution in a Twinning-Induced Plasticity SteelDevelopment of High-Performing Extruded Magnesium AlloyScalable Methods to Obtain Superhydrophobicity onto Metallic SurfaceHigh Temperature Mechanical Properties of Harmonic Structure Designed SUS304L Austenitic Stainless SteelEffect of Misch Metal Addition on Thermal Conductivities and Mechanical Properties of Mg-4Zn-0.5Ca AlloysThermo-Mechanical and Low Cycle Fatigue Failure Behavior Relevant to Temperature Regime in a TBCed Superalloy SpecimenOsteoconductivity of Superhydrophilic Ti- and Zr-Alloy for Biomedical ApplicationMicrostructure and Mechanical Properties of Nb Alloyed Steel Processed by Hot Equal Channel Angular ExtrusionDissimilar Metal Joining of A5052 Aluminum Alloy and AZ31 Magnesium Alloy Using Laser BrazingStudy of the Precipitation of Secondary Phases in Duplex and Superduplex Stainless SteelPractical Use of Computer Model STAN 2000 for Improvement and Creation of Regimes for Hot Rolling of Steels on SEVERSTAL Mill 2000Electrochemical Behaviors of Biomedical Nanograined ?-Type Titanium AlloysEvolution of Microstructure and Microhardness in Ti-15Mo ?-Ti Alloy Prepared by High Pressure TorsionSuperelasticity of Ti-Nb-Zr Alloys and their Medical ApplicationMicrostructure of AZCa912 Continuous Casting Bar after Hot Compression
In Situ Characterisation of Austenite/Ferrite Transformation Kinetics and Modelling of Interphase Precipitation Inter-Sheet Spacing in V Microalloyed HSLA SteelsTensile Stress Analyses through Digital Image Correlation of Single Lap Joints of High Strength Steel and Aluminum Alloy Using Adhesive BondingAnalysis of Pre-Strain in a Hybrid Forming Process Including Stretch and Incremental Sheet FormingFatigue Crack Growth in Flow Formed INCONEL 718Modeling the Microstructural and Yield Strength Evolution of an Age-Hardenable Al Alloy for High Temperature ApplicationsMaterials Research at University of Nevada, Las VegasLaser-Induced Surface Texturing of Metal or Organic Substrates for Structural Adhesive BondingNanooxides Derived from Hydrotalcites as Catalysts for Dry Methane Reforming Reaction - Effect of [Ni(EDTA)]2- Adsorption TimeComparative Study of Optimization in Pultrusion with Pre-Heating and Die-Cooler Temperature for Improved CureDynamic Piezoelectric Behavior of Lithium Niobate at High TemperatureRelationship between the Yield Strength-Fracture Toughness Balance and the Multiscale Microstructure of a Maraging Stainless Steel for Aircraft ApplicationsPhotonic Application of Diatom FrustulesCorrelation between Aging Effects and High Temperature Mechanical Properties of the Unmodified A356 Foundry Aluminium AlloyManganese Effect on Q&P CMnSi SteelsMicrostructural Evolution and Mechanical Behavior of Low Density Fe-Mn-Al-C Steels with High Stacking Fault EnergyNanocomposites Consisting of Carbon Nanotubes and Nanoparticles of Noble MetalsMechanical Behaviour of Materials during Creep with Changing LoadsMicrostructure and Texture Evolution in Nickel during Accumulative Roll BondingAn Experimental Investigation of the Size Effects in Forming Processes of High-Purity Thin Metallic SheetsThe Microstructural Criterion for Creep Strength Breakdown in a 10%Cr Martensitic SteelSPD Processed Materials Mechanical Properties Determination with the Use of Miniature SpecimensMachinability of an Experimental Graphitised Carbon SteelEffect of Microalloying Elements on Phase Transformation, Microstructure and Mechanical Properties in Dual-Phase SteelsDevelopment of Armor High Strength Steel (HSS) Martensitic Plates for Troops CarriersPhysical Simulation of Thermo-Mechanical Processing of Ferritic-Bainitic Dual Phase (FBDP) SteelEvolution of Microstructure, Phase Composition and Hardness in 316L Stainless Steel Processed by High-Pressure TorsionInfluence of Cross Section on the Parameters for Linear Friction Welding of High-Strength ChainsDetermination of Crystallographic Orientation near a Chill Zone Using Ghost LinesCrystal Structure and Microstructure of Martensite in Ni-Mn-In Alloys and the Behavior of Variant Rearrangement under Uniaxial LoadingAccelerated Aging and Portevin-Le Chatelier Effect in AA 2024Microstructure and Mechanical Properties of Mg-6Zn-1.4Y Alloy Produced by Rheo-Squeeze Casting ProcessThe Interface Character Distribution and Intergrannular Corrosion Resistance of Duplex Stainless Steel UNS S32304The Role of the Nd/Zn Ratio on the Stability of Mg-Zn-Nd Clusters and the Evolution of Texture in Two Mg-Zn-Nd Alloys during AnnealingMicrostructural Evolution in a 9%Cr-3%Co-3%W-VNb Steel during CreepIntegrated Defect Classification in Manufacturing of Carbon Fibre Reinforced Thermoplastic Polymer Matrix CompositesPlasticity and Size Effects in High Purity Cobalt: An Experimental StudyModelling Methods of Magnetohydrodynamic Phenomena Occurring in a Channel of the Device Used to Wash out Spent Automotive Catalyst on Metallic Substrate by a Liquid MetalMicrostructure and Residual Stress in Rotary Friction Welded Dissimilar Metals of AA7020 Aluminium Alloy with 316L SteelResidual Stress Measurements on IN718 Fatigue Specimens Using X-Ray Diffraction TechniquesComponents of a Heart Catheter System for High Risk PatientsGranulation of Bulk Metallic Glass Forming Alloys as a Feedstock for Thermoplastic Forming and their Compaction into Bulk SamplesModelling the Local Microstructure Properties due to Multi-Pass WeldingLocal Residual Stress Depth Distribution in the Inner Gearing of a Case Hardened Sliding CollarThe Quantification of Galling in Forming Operations of Hot Dip Galvanized Sheet Metal under Laboratory ConditionsLightweight Titanium Metal Bipolar Plates for PEM Fuel CellsMicrostructure-Property Relationships in Medium-Mn Steels with Metastable Retained AusteniteCombination of Microstructural Investigation and Simulation during the Heat Treatment of a Creep Resistant 11% Cr-SteelCreep Tendencies of Cu-Al Thin Wires Submitted to Moderate Temperature Conditions: Influence of Intermetallic CompoundsTorsional Piezoelectric Strain in Monocrystalline ParatelluriteHigh Performance Magnesium Based Composites Containing Nano-Length Scale/Amorphous/Hollow ReinforcementsRecrystallization Behavior of Aluminum Thin Foils with Various PurityEffect of Boron Addition on Microstructure and Mechanical Properties of AZ84 Mg AlloyProgress in Titanium MachiningUnraveling the Age Hardening Response in U-Nb AlloysCasting of an Mg Alloy Clad Strip Using a Twin Roll Caster Equipped with a ScraperHigh-Temperature Deformation Behavior of (Mo0.85Nb0.15)Si2 Crystals with C40/C11b Lamellar MicrostructureReinforcing Open Cell Aluminum Foams by Amorphous Ni-P CoatingPreparation of Al72Ni8Ti8Zr6Nb3Y3 Amorphous Powder and Bulk MaterialX-Ray and Neutron Scattering Studies of the 9Ni Cryogenic Steel and its Weld JointSurface Modification of Magnesium Alloy by Shot Lining and Laser HeatingEnvironment-Assisted Cracking of Super-Elastic TiNi Alloy Depending on Solution pH and Electrochemical PotentialEvaluation of Weldability of Titanium Alloy Ti-6Al-4V and Aluminum Alloy 6061 Produced by Electron Beam WeldingMaterial and Mechanical Aspects of CMAS Damage Progression on Thermal Barrier Coatings and its Non-Destructive DetectionEffects of Electric Current on the Microstructures and Mechanical Properties of Artificial Aged 6061 AlloyInfluence of High-Pressure Torsion on the Microstructure and the Hardness of a Ti-Rich High-Entropy AlloyMagnetic Shape Memory Effect in Ni-Mn-Ga Single CrystalMicrostructure and Microtexture Evolution of Invar Alloy after Cross Accumulative Roll Bonding (CARB) Compared to ARBSurface Structuring by Pulsed Laser ImplantationInfluence of Carbon Addition on Mechanical Properties of Thixomolded Magnesium AlloyCharacterization of the Acoustic Emission Response and Mechanical Properties of Mg Alloy with LPSO PhasePhonon Excitations in Pd40Ni40P20 Bulk Metallic Glass by Inelastic X-Ray ScatteringRecovery or Non-Recovery in Al-0.1% Mg and Al-1% Mg Alloy during High-Pressure Torsion Processing
In Situ Tensile Texture Analysis of a New Mg-RE AlloyImpact of Silicon, Magnesium and Strontium on Feeding Ability of AlSiMg Cast AlloysStudy on the Porosity in Al-Zn-Mg-Cu High Strength Alloy DC IngotMicro-Scale Strength Evaluation for Bonding Interface of Cold Sprayed CoatingsThermal Conductivity and Tensile Property of Mg-Zn-Y Casting Alloys with Long-Period Stacking Ordered PhaseStress and Strain Analysis in an Fe-Ga Alloy Single CrystalEffect of Annealing upon Retention of He and H in Irradiated SiCPreparation of Mg-TM-Y (TM=Transition Metal) Alloys with Long Period Stacking Ordered Phase and their Superior Mechanical PropertiesHigh Quality TMCP Production and Metallurgy of Niobium Bearing SteelsThe Optimal Placement of Sensors by Minimizing the Maximum Probability of Non-Detection Using Genetic AlgorithmSurface Engineering of Metal Oxide Photoelectrodes for Improved Band Alignment in Solar Water Splitting CellsLong-Term Performance Analysis of Geomembrane Considering Stress Cracking ResistanceAl-5Cu Alloy Processed by Equal-Channel Angular PressingAnalysis of Thin Strip Shape and Profile in Cold Rolling: A Way to Improve Strip Profile and Mechanical PropertiesLocal Surface Phase Stability during Cyclic Oxidation ProcessProcess Parameter Optimization of Fused Deposition Modeling for Helical Surfaces Using Grey Relational AnalysisInfluence of the Processing Variables on the Microstructure Evolution of a Bainitic Carbide-Free SteelThe Effect of Sample Preparation on the Microstructure of Austenitic-Ferritic Stainless SteelEffect of Red Scale on the Bendability of Ultrahigh-Strength Strip SteelEffects of Additional Elements on Hydrogen Storage Properties for Vanadium AlloysEvaluation of Rolling Contact Fatigue by Using an X-Ray Diffraction Ring AnalyzerEffect of Electroless Ni-P Plating on Mechanical Properties of Al-4%Ge AlloyFiber Laser Beam Welding of Ti-6242 - Effect of Processing Parameters on Microstructural and Mechanical PropertiesManufacturing of Aluminum Metal Matrix Cast Composites with Carbon Based Additives for Thermal Management ApplicationsMicrostructure Evolution Induced by Sliding-Based Surface Thermomechanical Treatments - Application to Pure CopperDetermination of the Grain Coarsening Temperature in Nb Microalloyed Steels by Multiphase-Field ModelThe Effects of Ultrasonic Nanocrystal Surface Modification Technique Temperature on Microstructure and Wear of Alloy 600Microstructural Characterization and Mechanical Properties of Stainless Steel Inlay Welded Dissimilar MaterialsEffect of Large Strain on Texture Formation Behavior of AZ80 Magnesium Alloy during High Temperature DeformationEffects of Die Steel on Die Soldering of Aluminum Alloy Die CastingSynchrotron Investigation on the Precipitation Behaviour of Niobium Microalloyed SteelModeling of the Hot Rolling: Towards the Industrial ApplicabilityOn the Dynamic SuperplasticityEffect of Oxygen Potential Gradient on Mass Transfer in Polycrystalline a-Alumina at High TemperatureEBSD Analysis and Assessment of Porosity in Thermal Barrier Coatings Produced by Axial Suspension Plasma Spraying (ASPS)Structure Formation in Ni Superalloys during High-Speed Direct Laser DepositionStructures and Properties of Laser-Assisted Cold-Sprayed Aluminum CoatingsThe Effect of Boron Addition on Precipitation and Hot Ductility of 1.5Mn-0.1Nb-Ti Carbon Steels in As-Cast ConditionNew Metallurgy of Additive Manufacturing in Metal: Experiences from the Material and Process Development with Electron Beam Melting Technology (EBM)Novel Bioreactor-System for In Situ-Cultivation of Artificial TissueInfluence of Thermo- and HIP Treatments on the Microstructure and Mechanical Properties of IN625 Alloy Parts Produced by Selective Laser Melting: A Comparative StudyModelling Yield Strength in an A6061 Aluminium AlloyThe 3D Imaging and Metrology of Microstructural Elements in Innovative Materials for Clean Energy Systems and AeronauticsEffect of Layer-by-Layer Texture Inhomogeneity on the Stress Corrosion of Gas Steel TubesEffect of Prior Austenite Grain Size on Yielding Behavior of the Low-C Martensitic Stainless SteelSheet Forming Processes for AW-7xxx Alloys: Relevant Process ParametersResolving the Strength-Ductility Paradox through Severe Plastic Deformation of a Cast Al-7% Si AlloyOsteoconductivity of Protein Adsorbed Titanium Implants Using Hydrothermal TreatmentEffect of Prior Strain on Damping Capacity and Mechanical Property during Heat TreatmentWelding of Automotive Aluminum Alloys by Laser Wobbling ProcessingMechanical Properties of Polymer-Based Hybrid Films: Tailoring the Hybrid Interface Using Soft ChemistryMechanical Behavior of a Metal Matrix Nanocomposite Synthesized by High-Pressure Torsion via Diffusion BondingEffect of CH4 Content on the Characteristics of Surface Layers of Low Temperature Plasma Nitrided 2205 Duplex Stainless SteelSeparating Technology of Pure Zirconia from Zircon-Sand by the Ar-H2 Arc Plasma Fusion and the Microwave LeachingAtomic Layer Deposited Protective LayersThe Role of Preliminary Heat Treatment in the Formation of Ultrafine-Grained Structure in the Implementation of the Combined Process "Rolling - Equal Channel Angular Pressing"The Study of the Microstructure of the Metal after Rolling Thick Workpieces of Nonferrous Metals and Alloys in Relief and Smooth RollsGas Nitriding of High-Vanadium Alloy SteelMorphology Evolution of Grain Boundary Carbides in Highly Twinned Inconel Alloy 600Deep Ultraviolet Photodetector Based on Sulphur-Doped Cubic Boron Nitride Thin FilmInfluence of Cu Doping on Martensitic and Magnetic Transitions in Ni-Mn-Sn AlloysThe Effect of Process Parameters in Interdendritic-Melt Solidification Control Technique on the Microstructure and Properties of a Ni-Base SuperalloyAffinity Viscosimetry Sensor for Enzyme Free Detection of Glucose in a Micro-Bioreaction ChamberExperimental Bio-ESPI for Validation of Magnetic Induced Deformation on HeLa CellsMicrostructure of Z-Phase Strengthened Martensitic Steels: Meeting the 650?C ChallengeMorphological Evolution of Carbides in DZ125 Superalloy during Heat TreatmentQuasi-Static and Dynamic Properties of Ti-3.5Al-2.5V-1.5Fe-0.25O Titanium Alloy PlatesInvestigations on Hot Tearing Susceptibility and its Mechanism of Mg-Zn-Y AlloysAnalysis of the Static Recrystallization Behavior of Nb-Ti Microalloyed Steels Including Low Strain LevelsMacrosegregation of Alloying Elements in Hot Top of Large Size High Strength Steel IngotInfluence of Coiling on Microstructural Evolution and Mechanical Properties of Strip-Cast Low-Carbon Low-Niobium SteelPreparation and Squeeze Casting of Nano-SiCP/A356 Composite Assisted with Ultrasonic Vibration ProcessEnabling Diamond Deposition with Cold Spray through the Coated Particle MethodThe Effect of Thermo-Mechanical Coupling on Microstructures and Tensile Properties of Al-Li 2198-T8 Alloy via Friction Spot WeldingSubstituting of a Thermodynamic Simulation with a Metamodel in the Scope of Multiscale ModellingA Novel Facility to Investigate Dust Mobilization in Confined Environments with Applications to the Security of the Pharmaceutical IndustryThermal Desorption Spectroscopy Study on the Hydrogen Behavior in a Plasma-Charged AluminumMicrostructure Evolution of a Directionally Solidified Ternary Eutectic Mo-Si-B AlloyFriction Stir Welding on Light-Weight Metal - Aluminum Alloy Al6061Characterization and Modelling of the Microstructure and Texture Evolution in AlMgSi-ExtrusionsOxidation of Fe-Al Alloys (5-40 at.% Al) at 700 and 900 ?CInfluence of Niobium Content on the Hot Mechanical Behavior of Nickel AlloysEffects of Hybrid Structures on the Stress Reduction and Thermal Properties of Joints in Electronics DevicesFormation of Hydrogen by Ball Milling of Mg and Mg Alloy in SeawaterBuilding Blocks for Artificial Extracellular Matrices Based on Cross-Linkable Polysaccharide and Glycosaminglycan SulfatesEffect of Nature Chemical Linker on the Formation of a Zeolitic Layer on Zirconia SubstratesBoron Effect on Hardenability of High Thickness Forged Steel MaterialsOn the Elaboration of Metal-Ceramic Composite Coatings by Laser CladdingImpact of the Confinement on the Intra-Cage Dynamics of Molecular Hydrogen in Clathrate HydratesEffects of a+? Intercritical and ? Single-Phase Annealing on Texture Evolution in Cold-Rolled Dual-Phase Steel SheetsTechnical Challenges in Narrow-Gap Root Pass Welding during Tandem and Hybrid Laser-Arc Welding of a Thick Martensitic Stainless SteelMicrostructure Evolution during LCF of a 10%Cr Steel at Room TemperatureInfluence of Severe Plastic Deformation on Mechanical Properties of an AA5024 AlloyThermomechanical Adhesion between Metallic Glass and Die MaterialsCrystallographic Investigation of the Initial Solidification Grain Structure in Al-Si AlloyEffect of Deformation Structure on Strength of a Low Alloyed Cu-Cr-Zr AlloyFriction and Wear Properties of aAlB12-NiAl Cermet Prepared by Spark Plasma SinteringPhase Stability and Mechanical Properties of Ti-Cr-Sn-Zr Alloys Containing a Large Amount of ZrMicrostructure of Rapidly Solidified Melt-Spun Ribbon in AlCoCrFeNi2.1 Eutectic High-Entropy AlloysMisorientation Measurement of Individual Grains in Fatigue of Polycrystalline Alloys by Diffraction Contrast Tomography Using Ultrabright Synchrotron RadiationDevelopment of a New Powder/Solid Composite for Biomimic Implant Materials by Electron-Beam Additive ManufacturingMicrostructure Formation of High Pressure Torsion Processed (a + ?) Two Phase Stainless SteelInfluence of Nano Reinforcement Volume Percentage on Fabrication of Surface Nanocomposite by FSPInfluence of Flash Treatment on Pseudoelastic Behaviour of Biomedical Ti-25Nb-3Zr-3Mo-2Sn Alloy
In Situ Techniques for the Investigation of the Kinetics of Austenitization of Supermartensitic Stainless SteelMetal Matrix Composites as Environment-Friendly Protective CoatingsCharacteristic Features of the Modulated Structure Appearing in the Multiferroic Material Bi1-xSmxFeO3 around x = 0.15Iron-Water Interface under Electrochemical ConditionMgO Implanted in Rat Tibia Bone Marrow is Osteoinductive through the Formation of a Matrix, Containing HydroxyapatiteCompressive Residual Stresses and Associated Surface Modifications Induced in Ti6Al4V by Laser Shock ProcessingDeformation Microstructures and Mechanical Properties of an Austenitic Stainless Steel Subjected to Warm RollingEvolution of Microstructure and Mechanical Properties with Different Partitioning Conditions of Q&P SteelsRapid Measurement of Texture of Metals by Time-of-Flight Neutron Diffraction at iMATERIA and its ApplicationsApplication of Thermo-Calc TCFE7 to High-Alloyed Mottled Cast IronDeformation Behavior of Inhomogeneous Layered MicrostructureFundamental Aspects of Rolled Zn Alloy Sheet Formability: Structure-Property and Failure Mode RelationshipsEffect of Aluminum Content on Texture Formation Behaviors in Magnesium AlloyModeling and Simulation of Q&P SteelsExperimental Investigation of Welding Parameters on Automatic TIG Welding of Aluminium 5083 PlateModelling the Static Recrystallization Kinetics of Microalloyed TWIP Steels with Different Alloying ContentsInfluence of Initial Heat Treatment on the Microhardness Evolution of an Al-Mg-Sc Alloy Processed by High-Pressure TorsionInfluence of Second Phases on the Superplasticity of Mg-Tm-Y-CeMM Alloys Containing LPSO-PhasesThe Effect of High-Doze Neutron Irradiation on Texture and Substructure Condition of Cladding Tubes from Zr-Based AlloysEffect of High Temperature Exposure on the Mechanical Properties of Self-Hardening Al-Based AlloyEffect of Secondary Phases Precipitation on Corrosion Resistance of Duplex Stainless SteelsModeling of Grain-Boundary Mobility and Nucleation Rate during Discontinuous Dynamic Recrystallization in Ni-Nb Alloys and a High-Purity Alloy Derived from SAE 304LEvolution of Ni Structure under ECAP and DCAP and Further AnnealingCoupling of Computational Thermodynamics with Kinetic Models for Predictive Simulations of Materials PropertiesPhotolithography of 3D Scaffolds for Artificial TissueFatigue Deformation Behavior of Fe-Mn-C-(Al) TWIP SteelsA Statistical Methodology to Reconstruct Nucleation Pathways in the Fe-Cu SystemSolidification Behavior of Aluminum-Copper Based Alloy during Controlled Diffusion SolidificationAnti-Bacterial Nanocomposites by Silver Nano-Coating FragmentationSoftening Kinetics of Plain Carbon Steels Containing Dilute Nb AdditionsBiocompatible Ceramic-Biopolymer Coatings Obtained by Electrophoretic Deposition on Electron Beam Structured Titanium Alloy SurfacesNeutron Diffraction Analysis of Light Alloys: A ReviewBridging the Gap between Ab Initio and Large Scale Studies - A Monte Carlo Study of Cu Precipitation in FeInnovative Surface Treatments of Titanium Alloys for Biomedical ApplicationsLaser Pulse Simulation of High Energy Transient Thermal Loads on Bulk and Plasma Sprayed W for NFRStudy on the Formation of Stray Grains during Directional Solidification of Nickel-Based SuperalloysTexture Characterization of Stainless Steel Cladded Layers of Process VesselsEffect of Previous Grain Size on Recystallization Texture and the Formability of the Nb Ferritic Stainless SteelThe Behaviour of Graphitized Steels in Machining ProcessesA New Approach for the Spectroscopic Detection of Different pH-ValuesInfluence of Long Heat Treatments on Hardness and Tribological Behaviour of HVOF Sprayed WC-CoCr and Cr3C2-25NiCr CoatingsHot Deformation Behavior and Stability Criteria of WE54 Magnesium AlloyDevelopment of a 2.25%Cr Steel P23 Reinforced with Micro/Nano-Carbide Particles Produced by Self-Propagating High-Temperature SynthesisAge Hardening Behavior of Al-Li Alloys Produced by Sand Mold ProcessEffect of Silicide on Dynamic Recrystallization in Near Alpha Titanium AlloyManufacturing of ODS RAFM Steel: Mechanical and Microstructural CharacterizationShape Recovery of Polymeric Matrix Composites by IrradiationComparison of Microstructure and Mechanical Behavior of the Ferritic Stainless Steels ASTM 430 Stabilized with Niobium and ASTM 439 Stabilized with Niobium and TitaniumRecrystallization Kinetics and Texture Evolution of Nb Stabilized Ferritic 430 Stainless Steel Cold Rolled and Isothermal AnnealedThermal Effect during Electromagnetic Pulse Welding ProcessRe-Melting Technique with High Intense Pulsed Plasma Beams Applied for Surface Modification of Steel - Own InvestigationsEffect of Preparation Conditions of TiB2 Particle Dispersed Al Composites on MicrostructureX-Ray Stress Measurement of Austenitic Stainless Steel with cosa Method and Two-Dimensional X-Ray DetectorPhysical Modelling of Metallurgical ProcessesEffects of Particle Size on Fabrication of Al-TiO2 Functionally Graded Materials by Centrifugal Mixed-Powder MethodUsability of Ti6Al4V Powder via Hydride-Dehydride Process for Selective Laser Melting ProcessGaN Thin-Film-Depositions on Glass and Amorphous-SiO2-Layer-Deposited Si Single-Crystalline SubstratesInfluence of Different pH and Fluoride Addition on the Corrosion Behavior of the Sintered CoCr Alloy Ceramill Sintron Compared to the Cast Alloy Girobond NBLiquid Composite Molding: A Widely Used Group of FRPC Processing Techniques, but still a Challenging TopicMiniaturized Laser Power Sensor via Rapid PhototypingInfluence of Corrosive Conditions on the Mechanical Performance of Flow Drill Screw Joints between Light MetalsCalculation of the Stress Interaction between Dislocation Pile-Ups in Neighbouring Misoriented GrainsHigh-Pressure Synthesis of Skutterudite-Type Thermoelectric MaterialsDevelopment of Joining Method between Zircaloy and SiC/SiC Composite Tubes by Using Diode LaserKinetics of Submicrocrystalline Structure Formation in a Cu-Cr-Zr Alloy during Large Plastic DeformationThe Effects of Interfacial Heat Transfer Coefficient on the Microstructure of High-Pressure Die-Cast Magnesium Alloy AM60BCooling Curve Based Estimation of Mechanical Properties in High Strength Steel WeldsFeatures of Electronic States in the Highly-Correlated Electronic System Sr1-xNdxMnO3 around x = 0.50Fluctuation of Position and Energy of a Fine Particle in Plasma NanofabricationMicrostructure and Porous Defects of a Spray-Formed and Hot Worked 7000 Aluminum AlloyHot Torsion Tests - A Reliable Rolling Simulation Method for C-Mn SteelsDevelopment of a Biomimetic Metallic Femoral Stem: Methodological ApproachThe Issue of Grain Size Distribution Using Mean Field Models for Dynamic and Post-Dynamic RecrystallizationMeasurement of Residual Stresses in Linear Friction Welded In-Service Inconel 718 SuperalloyEvaluation of the Hardening Capacity of Low-Alloyed Steels Quenched by HPGQ in Vacuum FurnacesMathematical Modelling of Steel QuenchingAn Appraisal of Direct Quenching for the Development and Processing of Novel Super-High Strength SteelsEffect of Heat Treatment on the Microstructure Evolution of Ti-6Al-3Sn-3Zr-3Mo-3Nb-1W-0.2Si Titanium AlloyNb-Microalloying in Next-Generation Flat-Rolled Steels: An OverviewAdvanced Evaluation of Fatigue Phenomena Using Non-Destructive Testing MethodsThe Effects of Intercritical Annealing Temperature and Initial Microstructure on the Stability of Retained Austenite in a 0.1C-6Mn SteelMicrostructure Refinement in the CoCrFeNiMn High Entropy Alloy under Plastic StrainingNovel ESPI Measurement Prototype for Analyzing Biological Samples from Cell Culture TechniqueElectron Beam Welding of TZM SheetsSystematic Investigation of the Temperature Field in Atmospheric Plasma Processing (APP)Effect of As-Rolled Microstructure on Static Recrystallization Characteristics and Texture Evolution during AnnealingUse of Carbon Nanomaterials as a Catalyst Support in Fuel CellsEffect of the Interfacial Thermal Resistance on Effective Thermal Conductivity of Al/SiC Particle-Dispersed CompositesInfluence of ?-Mg17Al12 Phase on Initial Pitting Process of AZ91D Magnesium AlloyThe Low-Nickel Cryogenic Steel Alloyed by NitrogenThree-Dimensional Dynamic Explicit Finite Element Analysis of Charpy Impact TestMicrostructure Observations of Graphite in Gray Cast Iron Using TEMDispersion of CNTs in Selective Laser Melting Printed AlSi10Mg Composites via Friction Stir ProcessingDesign and Characterization of Conductive Biopolymer Nanocomposite Electrodes for Medical ApplicationsThermal Joining of Highly Conductive Bonds by Using Reactive Al-Ni NanofoilsRelationship between Microstructure and Mechanical Properties in Q&P-SteelsProgress in the Understanding of the Microstructure Evolution of Direct Laser Fabricated TiAlMicrostructure and Properties of Al-12.7Si-0.7Mg Alloy Extrusion after End-Quenching TestMicrostructure Evolution and Creep Properties of a Single Crystal Nickel-Based Superalloy with Various OrientationsEffect of SPD Processing Technique on Grain Refinement and Properties of an Austenitic Stainless SteelEffect of Tempering on Microstructure and Creep Properties of P911 Steel? Phase Transformation and Mechanical Properties in Binary Zr-Nb Biomedical AlloyTi-Cu-Based Amorphous Powders Produced by Ball-MillingDevelopment of the Advanced TBC for High Efficiency Gas TurbineFabrication of High Porosity Mullite Foams and their Thermal PropertiesInfluence of Thermomechanical Treatment on the Damping Capacity of Selected Magnesium AlloysEffect of ? Number of Transition Metals on the Cohesive Properties of Cr-Ni-Base AlloysReverse Transformation Behavior Induced by Shot-Peening for SUS410S Martensitic Stainless SteelNonlinear Optimization Methods for the Determination of Heat Source Model ParametersEffects of Cross-Rolling on Deformation Texture Evolution in Unalloyed TitaniumHigh-Temperature Mechanical Properties and Constitutive Modelling of Ti6Al4V SheetsEarly Instability Phenomena of IN792 DS SuperalloyEffect of Heat Treatments on TiH2: Surface Composition and Hydrogen ReleaseTexture Gradient through Thickness of a Cross Roll-Bonded AA5754/AA6061 Aluminum CompositeShock-Induced Reaction Characteristics of an Al/Ni Composite Processed via Accumulative Roll-BondingEffects of Initial Micro-Structures on Deformation Behaviors of Commercial Pure TitaniumMicrostructural Evolution of AZ31 under the Application of High Density Electric Current PulsesMartensitic Transformation and Crystal Structure Characterization of Ni-Fe-Ga-Co Ferromagnetic Shape Memory AlloysRefined and Uniform Microstructure with Superior Mechanical Properties in Medium Plate Microalloyed Steel with Reduction in Mn-Content during Ultrafast CoolingLinear Friction Welding of IN718 to Ti6Al4VElectron Beam Welding of High Strength Quenched and Tempered SteelSaturation of Deformation Twinning in Magnesium AlloysTemperature Field Evolution during Flash Butt Welding of Railway RailsEffects of Microalloy Additions and Thermomechanical Processing on Austenite Grain Size Control in Induction-Hardenable Medium Carbon Steel Bar RollingDissimilar Electron Beam Welds of Nickel Base Alloy A625 with a 9% Cr-Steel for High Temperature ApplicationsInfluence of NbC-Precipitation on Hot Ductility in Microalloyed Steel - TEM Study and Thermokinetic ModelingModification Effects of Sb on Al7SiMg Alloy Measured with Cooling Curve AnalysisNumerical Simulation of Pore Evolution of 7050 Aluminum Alloy during Hot Compression ProcessDefects and Charging Processes in Li-Ion Battery Cathodes Studied by Operando Magnetometry and Positron AnnihilationProcessing and Thermoelectric Properties of New Si-/ Se-/ Sn-Based IntermetallicsMicrostructure of Fiber Laser Deposited WC-Co Cemented Carbide and Carbon SteelEffect of Continuous Annealing Temperature on Microstructure and Mechanical Properties of a High Strength Cold-Rolled DP980 SteelFramework Structures for Mg Battery CathodesFurther Study on the Effect of Environment on Fatigue Crack Growth Behavior of 2000 and 7000 Series Aluminum AlloysCrystallographic Features of Electronic States in the Highly-Correlated Electronic System Sr1-xSmxMnO3 around x = 0.50Effect of Nitrogen on Age-Hardening of Metastable Austenitic Stainless Steel after Cold DrawingEffect of Chlorine Atoms for Development of Aluminum CorrosionInitiation and Propagation Behaviors of Small Crack in a Polycrystalline Ni-Base Superalloy under Thermo-Mechanical Fatigue LoadingCrystal Structure, Microstructure and Martensitic Transformation Path in Ni-Mn-In AlloysEffect of Grain Size on Oxidation Resistance of Unalloyed TitaniumGrain Boundary Engineering of ECAPed OFHC CopperMicrostructure Evolution of Laser Direct Metal Deposition of M2 High Speed SteelMg-Zn-Y Alloys with Long-Period Stacking Ordered Phases: Deformation, Creep, Solute Segregation and Strengthening Mechanisms at Elevated TemperaturesDeformation Behavior of Fe-Al-Co-Ti Single Crystals Containing Co2AlTi PrecipitatesEffect of Added Elements on Microstructures and Joint Strength of Lead-Free Sn-Based Solder Joint Dispersed IMC PillarCrystallographic Features of the State Appearing in the Multiferroic Material Bi1-xLaxFeO3 around x = 0.20Influence of Grain Size on Work-Hardening Behavior in 12Cr Stainless SteelEvaluation of Parameters Effect on Microstructure and Mechanical Properties in TIG Welding of A105 to A106 SteelsThe Effect of Sc Addition on Microstructure in Mg-Gd AlloysComparison of Self-Annealing Behaviors in (001)- and (111)-Oriented Electrodeposited Silver Films by In Situ EBSP AnalysisEffect of Friction Stir Welding on Microstructure of a 5024 AlloyMicrostructure and Property of Fe-Based Alloy Modified Layer on 304 Stainless Steel by High-Energy Pulse Laser-Like Cladding (HPLC)Microstructures and Properties of Aluminum Alloys during Repetitive Continuous Extrusion FormingThe Portevin-Le Chatelier Effect and Kinematics of Deformation Bands in an Al-Mg-Sc Alloy: Effect of Grain SizeEffects of Hydraulic Pressure on Shape Accuracy of Drawn Circular Cups during Micro Hydro Deep DrawingKinetics of Microstructure Refinement in Titanium Alloys during DeformationNeedle Like Fe-Containing Intermetallic Compounds of High Silicon Aluminum Alloy with Fe Modified by Mn and Ultrasonic VibrationMicrostructure and Mechanical Properties of Medium Manganese Steel Plate with High Strength and ToughnessEffect of Mischmetal Additions and Solution Heat Treatments (T4) on the Microstructure and Mechanical Properties of Thixocast ZK60-RE Magnesium AlloysDissimilar Friction Stir Welding of HSLA Steel to Austenitic High-Mn TRIP SteelEffects of Warm Working on Microstructural and Shear Deformation Properties of TRIP-Aided Martenitic SteelCharacterization of Phase Transitions Occurring in Solution Treated Ti-15Mo during Heating by Thermal Expansion and Electrical Resistance MeasurementsMicrostructure and Creep Properties of Silicon- and/or Germanium-Bearing Near-a Titanium AlloysFormation and Dissolution of Hydride Precipitates in Zirconium Alloys: Crystallographic Orientation Relationships and Stability after Temperature CyclingResearch on Microstructure Evolution in Al-9.8Zn-2.0Mg-1.8Cu Alloy during Solution TreatmentConcurrent Validity of a New Contact Mat for Estimating Vertical Jump HeightThe Use of Vibrotactile Stimulation for Improving Manual Tasks in Parkinson's Disease PatientsEvaluating Athletic Performances with a Real Time Location and Tracking SystemOtoacoustic Emissions as a Promising Diagnostic Tool for the Early Detection of Mild Hearing Impairment - Technical Advances in Acquisition, Analysis and ModelingNear Infrared Device for Tissue Inflammation EvaluationEvolution of Recrystallization Textures in Cold-Rolled Commercially Pure AluminumChange in Mechanical Strength and Bone Contact Ratio of Beta-Type TNTZ Subjected to Mechanical Surface ModificationTensile and Fatigue Properties of Miniature Size Specimens of Sn-5Sb Lead-Free SolderEffect of Sr Addition on the Solidification Structure in Al-6mass%Mg-3mass%Si AlloyAnalysis of Recrystallization Behavior of Hot-Deformed Austenite Reconstructed from EBSD Orientation Maps of Lath MartensiteSuperplasticity of Friction-Stir Welded Al-Mg-Sc Alloy with Ultrafine-Grained Microstructure Obtained by Warm Severe Plastic DeformationComplex Nano-Scale Structures for Unprecedented Properties in SteelsThe Effect of Thermomechanical Processing Temperature-Strain-Time Parameters on the Mesostructure FormationThermal Conductivity of Cubic Boron Nitride (cBN) Particle Dispersed Al Matrix Composites Fabricated by SPSLightweight Sandwich Structures in Innovative Vehicle Design under Crash Load CasesRecrystallization Twinning in Stable Single Crystals of Cu-2%Al and Al-1%Mn AlloysEffects of Magnetic Field Intensity on Carbon Diffusion in Pure Iron in Paramagnetic Ferrite RegionSolidification of Al-Pb Alloy under the Effect of Micro-Alloying Element Ti and C
In Vitro Assessment of Hydroxyapatite Coating on the Surface of Additive Manufactured Ti6Al4V ScaffoldsAging Property of AZ91D Magnesium Alloy Screw Thread-Rolled at Room Temperature Using Extrusion-Torsion Simultaneous ProcessingContinuous Modeling of Dislocation Cores Using a Mechanical Theory of Dislocation FieldsSimultaneous Precipitation and Recrystallization during Hot Deformation of Ti, Nb and V Microalloyed SteelSolid-State Bonding of 5052 Aluminum Alloy/316L Stainless Steel by Using Organic Salt Formation/Decomposition ReactionTheoretical Study of Local Electric Conductive Properties by Electronic Tension DensityInfluence of a Direct Current on the Solidification of Immiscible AlloysStereolithographic Additive Manufacturing of Ceramic Components by Using Nanoparticle Paste FeedingRevealing the Individual Hardening Effects of Twins, Dislocations, Grain Boundaries and Solid Solution in a Twinning-Induced Plasticity SteelDevelopment of High-Performing Extruded Magnesium AlloyScalable Methods to Obtain Superhydrophobicity onto Metallic SurfaceHigh Temperature Mechanical Properties of Harmonic Structure Designed SUS304L Austenitic Stainless SteelEffect of Misch Metal Addition on Thermal Conductivities and Mechanical Properties of Mg-4Zn-0.5Ca AlloysThermo-Mechanical and Low Cycle Fatigue Failure Behavior Relevant to Temperature Regime in a TBCed Superalloy SpecimenOsteoconductivity of Superhydrophilic Ti- and Zr-Alloy for Biomedical ApplicationMicrostructure and Mechanical Properties of Nb Alloyed Steel Processed by Hot Equal Channel Angular ExtrusionDissimilar Metal Joining of A5052 Aluminum Alloy and AZ31 Magnesium Alloy Using Laser BrazingStudy of the Precipitation of Secondary Phases in Duplex and Superduplex Stainless SteelPractical Use of Computer Model STAN 2000 for Improvement and Creation of Regimes for Hot Rolling of Steels on SEVERSTAL Mill 2000Electrochemical Behaviors of Biomedical Nanograined ?-Type Titanium AlloysEvolution of Microstructure and Microhardness in Ti-15Mo ?-Ti Alloy Prepared by High Pressure TorsionSuperelasticity of Ti-Nb-Zr Alloys and their Medical ApplicationMicrostructure of AZCa912 Continuous Casting Bar after Hot Compression