THERMEC 2016

<ul><li>Preface, Committees, Sponsors</li><li>Chapter 1: Keynote Papers</li><li>Fatigue Life Extension by Crack Repair Using Double Stop-Hole Technique</li><li>Intermetallic Phases in New Steels</li><li>An Artistic Approach to Thermal Spray</li><li>Dynamic Transformation during Plate and Strip Rolling</li><li>The Role of Microstructure in Creep Strength of 9-12%Cr Steels</li><li>Micro-Mechanical Responses of Ultrafine-Grained Materials Processed through High-Pressure Torsion</li><li>The Development of Superplasticity and Deformation Mechanism Maps in an Ultrafine-Grained Magnesium Alloy</li><li>Revision of ISO 27306 for CTOD Toughness Correction for Constraint Loss</li><li>Development of Polymer-Based Composite Coatings for the Gas Exploration Industry: Polyoxometalate Doped Conducting Polymer Based Self-Healing Pigment for Polymer Coatings</li><li>Anelastic Phenomena Preceding the Melting of Pure Metals and Alloys</li><li>Combined Effects of Grain Boundary Convection and Migration in Dynamic Phase Transformations</li><li>Complex Cell Physiology on Topographically and Chemically Designed Material Surfaces</li><li>Metallurgical Aspects Affecting Thermomechanical Processing of Ti Based Microalloyed Steels</li><li>Thermomechanical Processing of Medium Manganese Steels</li><li>Diamond Based Schottky Photodiode for Radiation Therapy <i>In Vivo</i> Dosimetry</li><li>Thermo-Mechanical Training of Stainless Steels to Improve Damping Capacity</li><li>Development of High-Temperature Shape Memory Alloys above 673 K</li><li>Advanced Intermetallic TiAl Alloys</li><li>Development and Research of Low-Cost Titanium Alloys, Especially Case of Japan</li><li>Enhancement of Mechanical Biocompatibility of Titanium Alloys by Deformation-Induced Transformation</li><li>Chapter 2: Contributed Papers</li><li>Magnetic Shape Memory - Polymer Hybrids</li><li>Hardness Homogeneity in an AZ80 Magnesium Alloy Processed by High-Pressure Torsion</li><li>Microstructure Evolution and Deformation Mechanisms of Harmonic Structure Designed Materials</li><li>A Comparative Study of Molecular Motion Cooperativity in Polymeric and Metallic Glass-Forming Liquids</li><li>Damage Initiation in Dual-Phase Steels: Influence of Crystallographic and Morphological Parameters</li><li>Microstructure and Friction Behavior of AISI 52100 and D2 Steels Subjected to Ultrasonic Nanocrystalline Surface Modification (UNSM) Technique at a High Temperature</li><li>Microstructure Study of Nickel-Based Superalloys after Deep Cold Rolling</li><li>IN792 DS Superalloy: Optimization of EB Welding and Post-Welding Heat Treatments</li><li>Mathematical Model of Microstructural Evolution of Hot Rolled Wire Rods for Nb Microalloyed Steels</li><li>A Study on the Microstructural Characterization of Rene? 142 Deposited Atop Rene? 125 Processed through Scanning Laser Epitaxy</li><li>Correlations between Defect Content, Mechanical Properties and Fractographic Investigation of AlSi9Cu3(Fe) Alloy Reference Castings</li><li>Influence of Thermal History on the Hot Ductility of Ti-Nb Microalloyed Steels</li><li>Innovative Experimental Approaches and Physical Measurement Methods for Fatigue Monitoring and Life Assessment</li><li>Novel Concepts for the Application of Magnesium Sheets and Profiles in Crash Loaded Vehicle Areas</li><li>Influence of Microalloying Elements Ti and Nb on Recrystallization during Annealing of Advanced High-Strength Steels</li><li>Regularities of Microstructure Evolution and Strengthening Mechanisms of Austenitic Stainless Steels Subjected to Large Strain Cold Working</li><li>Effect of Temperature and Strain Rate on the Mechanical Properties of 99.5 Aluminium Rods Extruded by KOBO</li><li>Miniaturized Flow-Through Bioreactor for Processing and Testing in Pharmacology</li><li>Microretina: An "Open Source" Tool for Retinal Images Analysis</li><li>Phase Stability Study of the Shape Memory Alloy CuAl-X (X: Be, Zn, Ti, Ni, Ag and Au) by <i>Ab Initio</i> Calculations</li><li>Phase Constitution and Martensitic Transformation Behavior of Au-51Ti-18Co Biomedical Shape Memory Alloy Heat-Treated at 1173K to 1373K</li><li>Thermal Plasticity Index of Nanostructured N-Based Coatings on HSS 6-5-2 (1.3343) Tool Steel</li><li>Microstructural Investigation of Oxynitrocarburized Components Processed at Different Temperatures</li><li>Numerical Simulation of the Effects of Preheating on Electron Beam Additive Manufactured Ti-6Al-4V Build Plate</li><li>Development of Al-Mg-Si-(Cu) Alloys for Automotive Body Panels and the Related Ageing Behaviours</li><li>Optimal Deformation Hardening in Lead Base Anodes for Copper Electrowinning for an Appropiate Working Life</li><li>Gold Recovery from PCBs with Thiosulfate as Complexing Agent</li><li>Friction Stir Processing at High Rotation Rates of a Magnesium Alloy: Mechanical Properties at High Temperatures and Microstructure</li><li>Fracture Surface Characterisation of Friction Stir Processed Magnesium Alloy after Mechanical Tests</li><li>Influence of Dynamic Strain Ageing and Long Term Ageing on Deformation and Fracture Behaviors of Alloy 617</li><li>Development and Industrial Applying on Rolling Mill 5000 of the Model of Austenite Grain Size Evolution in Nb-Microalloyed Steels</li><li>Effects of Precipitated Particles on Microstructure Evolution during Thermo-Mechanical Processing of Al-Zn-Mg-Cu Alloy</li><li>Analysis of Deformation and Internal Defect in Flat-Wedge Cross-Wedge Rolling of GH4169 Superalloy</li><li>Effects of Laser Power on Track Profile and Structure Formation during Selective Laser Melting of CoCrMo Alloy</li><li>The Observation of Austenite to Ferrite Martensitic Transformation in an Fe-Mn-Al Austenitic Steel after Cooling from High Temperature</li><li>Mechanical Analyses of Welding in Practical Field</li><li>Mechanical Properties of Fine-Grained and Ultrafine-Grained Ti-6Al-4V with Equiaxed and Bimodal Microstructures</li><li>The Effect of Final Annealing Heating Rate on Abnormal Grain Growth in a Fe-3.5%Si Steel</li><li>
<i>In Situ</i> Characterisation of Austenite/Ferrite Transformation Kinetics and Modelling of Interphase Precipitation Inter-Sheet Spacing in V Microalloyed HSLA Steels</li><li>Tensile Stress Analyses through Digital Image Correlation of Single Lap Joints of High Strength Steel and Aluminum Alloy Using Adhesive Bonding</li><li>Analysis of Pre-Strain in a Hybrid Forming Process Including Stretch and Incremental Sheet Forming</li><li>Fatigue Crack Growth in Flow Formed INCONEL 718</li><li>Modeling the Microstructural and Yield Strength Evolution of an Age-Hardenable Al Alloy for High Temperature Applications</li><li>Materials Research at University of Nevada, Las Vegas</li><li>Laser-Induced Surface Texturing of Metal or Organic Substrates for Structural Adhesive Bonding</li><li>Nanooxides Derived from Hydrotalcites as Catalysts for Dry Methane Reforming Reaction - Effect of [Ni(EDTA)]^2- Adsorption Time</li><li>Comparative Study of Optimization in Pultrusion with Pre-Heating and Die-Cooler Temperature for Improved Cure</li><li>Dynamic Piezoelectric Behavior of Lithium Niobate at High Temperature</li><li>Relationship between the Yield Strength-Fracture Toughness Balance and the Multiscale Microstructure of a Maraging Stainless Steel for Aircraft Applications</li><li>Photonic Application of Diatom Frustules</li><li>Correlation between Aging Effects and High Temperature Mechanical Properties of the Unmodified A356 Foundry Aluminium Alloy</li><li>Manganese Effect on Q&P CMnSi Steels</li><li>Microstructural Evolution and Mechanical Behavior of Low Density Fe-Mn-Al-C Steels with High Stacking Fault Energy</li><li>Nanocomposites Consisting of Carbon Nanotubes and Nanoparticles of Noble Metals</li><li>Mechanical Behaviour of Materials during Creep with Changing Loads</li><li>Microstructure and Texture Evolution in Nickel during Accumulative Roll Bonding</li><li>An Experimental Investigation of the Size Effects in Forming Processes of High-Purity Thin Metallic Sheets</li><li>The Microstructural Criterion for Creep Strength Breakdown in a 10%Cr Martensitic Steel</li><li>SPD Processed Materials Mechanical Properties Determination with the Use of Miniature Specimens</li><li>Machinability of an Experimental Graphitised Carbon Steel</li><li>Effect of Microalloying Elements on Phase Transformation, Microstructure and Mechanical Properties in Dual-Phase Steels</li><li>Development of Armor High Strength Steel (HSS) Martensitic Plates for Troops Carriers</li><li>Physical Simulation of Thermo-Mechanical Processing of Ferritic-Bainitic Dual Phase (FBDP) Steel</li><li>Evolution of Microstructure, Phase Composition and Hardness in 316L Stainless Steel Processed by High-Pressure Torsion</li><li>Influence of Cross Section on the Parameters for Linear Friction Welding of High-Strength Chains</li><li>Determination of Crystallographic Orientation near a Chill Zone Using Ghost Lines</li><li>Crystal Structure and Microstructure of Martensite in Ni-Mn-In Alloys and the Behavior of Variant Rearrangement under Uniaxial Loading</li><li>Accelerated Aging and Portevin-Le Chatelier Effect in AA 2024</li><li>Microstructure and Mechanical Properties of Mg-6Zn-1.4Y Alloy Produced by Rheo-Squeeze Casting Process</li><li>The Interface Character Distribution and Intergrannular Corrosion Resistance of Duplex Stainless Steel UNS S32304</li><li>The Role of the Nd/Zn Ratio on the Stability of Mg-Zn-Nd Clusters and the Evolution of Texture in Two Mg-Zn-Nd Alloys during Annealing</li><li>Microstructural Evolution in a 9%Cr-3%Co-3%W-VNb Steel during Creep</li><li>Integrated Defect Classification in Manufacturing of Carbon Fibre Reinforced Thermoplastic Polymer Matrix Composites</li><li>Plasticity and Size Effects in High Purity Cobalt: An Experimental Study</li><li>Modelling Methods of Magnetohydrodynamic Phenomena Occurring in a Channel of the Device Used to Wash out Spent Automotive Catalyst on Metallic Substrate by a Liquid Metal</li><li>Microstructure and Residual Stress in Rotary Friction Welded Dissimilar Metals of AA7020 Aluminium Alloy with 316L Steel</li><li>Residual Stress Measurements on IN718 Fatigue Specimens Using X-Ray Diffraction Techniques</li><li>Components of a Heart Catheter System for High Risk Patients</li><li>Granulation of Bulk Metallic Glass Forming Alloys as a Feedstock for Thermoplastic Forming and their Compaction into Bulk Samples</li><li>Modelling the Local Microstructure Properties due to Multi-Pass Welding</li><li>Local Residual Stress Depth Distribution in the Inner Gearing of a Case Hardened Sliding Collar</li><li>The Quantification of Galling in Forming Operations of Hot Dip Galvanized Sheet Metal under Laboratory Conditions</li><li>Lightweight Titanium Metal Bipolar Plates for PEM Fuel Cells</li><li>Microstructure-Property Relationships in Medium-Mn Steels with Metastable Retained Austenite</li><li>Combination of Microstructural Investigation and Simulation during the Heat Treatment of a Creep Resistant 11% Cr-Steel</li><li>Creep Tendencies of Cu-Al Thin Wires Submitted to Moderate Temperature Conditions: Influence of Intermetallic Compounds</li><li>Torsional Piezoelectric Strain in Monocrystalline Paratellurite</li><li>High Performance Magnesium Based Composites Containing Nano-Length Scale/Amorphous/Hollow Reinforcements</li><li>Recrystallization Behavior of Aluminum Thin Foils with Various Purity</li><li>Effect of Boron Addition on Microstructure and Mechanical Properties of AZ84 Mg Alloy</li><li>Progress in Titanium Machining</li><li>Unraveling the Age Hardening Response in U-Nb Alloys</li><li>Casting of an Mg Alloy Clad Strip Using a Twin Roll Caster Equipped with a Scraper</li><li>High-Temperature Deformation Behavior of (Mo_0.85Nb_0.15)Si₂ Crystals with C40/C11_b Lamellar Microstructure</li><li>Reinforcing Open Cell Aluminum Foams by Amorphous Ni-P Coating</li><li>Preparation of Al₇₂Ni₈Ti₈Zr₆Nb₃Y₃ Amorphous Powder and Bulk Material</li><li>X-Ray and Neutron Scattering Studies of the 9Ni Cryogenic Steel and its Weld Joint</li><li>Surface Modification of Magnesium Alloy by Shot Lining and Laser Heating</li><li>Environment-Assisted Cracking of Super-Elastic TiNi Alloy Depending on Solution pH and Electrochemical Potential</li><li>Evaluation of Weldability of Titanium Alloy Ti-6Al-4V and Aluminum Alloy 6061 Produced by Electron Beam Welding</li><li>Material and Mechanical Aspects of CMAS Damage Progression on Thermal Barrier Coatings and its Non-Destructive Detection</li><li>Effects of Electric Current on the Microstructures and Mechanical Properties of Artificial Aged 6061 Alloy</li><li>Influence of High-Pressure Torsion on the Microstructure and the Hardness of a Ti-Rich High-Entropy Alloy</li><li>Magnetic Shape Memory Effect in Ni-Mn-Ga Single Crystal</li><li>Microstructure and Microtexture Evolution of Invar Alloy after Cross Accumulative Roll Bonding (CARB) Compared to ARB</li><li>Surface Structuring by Pulsed Laser Implantation</li><li>Influence of Carbon Addition on Mechanical Properties of Thixomolded Magnesium Alloy</li><li>Characterization of the Acoustic Emission Response and Mechanical Properties of Mg Alloy with LPSO Phase</li><li>Phonon Excitations in Pd₄₀Ni₄₀P₂₀ Bulk Metallic Glass by Inelastic X-Ray Scattering</li><li>Recovery or Non-Recovery in Al-0.1% Mg and Al-1% Mg Alloy during High-Pressure Torsion Processing</li><li>
<i>In Situ</i> Tensile Texture Analysis of a New Mg-RE Alloy</li><li>Impact of Silicon, Magnesium and Strontium on Feeding Ability of AlSiMg Cast Alloys</li><li>Study on the Porosity in Al-Zn-Mg-Cu High Strength Alloy DC Ingot</li><li>Micro-Scale Strength Evaluation for Bonding Interface of Cold Sprayed Coatings</li><li>Thermal Conductivity and Tensile Property of Mg-Zn-Y Casting Alloys with Long-Period Stacking Ordered Phase</li><li>Stress and Strain Analysis in an Fe-Ga Alloy Single Crystal</li><li>Effect of Annealing upon Retention of He and H in Irradiated SiC</li><li>Preparation of Mg-TM-Y (TM=Transition Metal) Alloys with Long Period Stacking Ordered Phase and their Superior Mechanical Properties</li><li>High Quality TMCP Production and Metallurgy of Niobium Bearing Steels</li><li>The Optimal Placement of Sensors by Minimizing the Maximum Probability of Non-Detection Using Genetic Algorithm</li><li>Surface Engineering of Metal Oxide Photoelectrodes for Improved Band Alignment in Solar Water Splitting Cells</li><li>Long-Term Performance Analysis of Geomembrane Considering Stress Cracking Resistance</li><li>Al-5Cu Alloy Processed by Equal-Channel Angular Pressing</li><li>Analysis of Thin Strip Shape and Profile in Cold Rolling: A Way to Improve Strip Profile and Mechanical Properties</li><li>Local Surface Phase Stability during Cyclic Oxidation Process</li><li>Process Parameter Optimization of Fused Deposition Modeling for Helical Surfaces Using Grey Relational Analysis</li><li>Influence of the Processing Variables on the Microstructure Evolution of a Bainitic Carbide-Free Steel</li><li>The Effect of Sample Preparation on the Microstructure of Austenitic-Ferritic Stainless Steel</li><li>Effect of Red Scale on the Bendability of Ultrahigh-Strength Strip Steel</li><li>Effects of Additional Elements on Hydrogen Storage Properties for Vanadium Alloys</li><li>Evaluation of Rolling Contact Fatigue by Using an X-Ray Diffraction Ring Analyzer</li><li>Effect of Electroless Ni-P Plating on Mechanical Properties of Al-4%Ge Alloy</li><li>Fiber Laser Beam Welding of Ti-6242 - Effect of Processing Parameters on Microstructural and Mechanical Properties</li><li>Manufacturing of Aluminum Metal Matrix Cast Composites with Carbon Based Additives for Thermal Management Applications</li><li>Microstructure Evolution Induced by Sliding-Based Surface Thermomechanical Treatments - Application to Pure Copper</li><li>Determination of the Grain Coarsening Temperature in Nb Microalloyed Steels by Multiphase-Field Model</li><li>The Effects of Ultrasonic Nanocrystal Surface Modification Technique Temperature on Microstructure and Wear of Alloy 600</li><li>Microstructural Characterization and Mechanical Properties of Stainless Steel Inlay Welded Dissimilar Materials</li><li>Effect of Large Strain on Texture Formation Behavior of AZ80 Magnesium Alloy during High Temperature Deformation</li><li>Effects of Die Steel on Die Soldering of Aluminum Alloy Die Casting</li><li>Synchrotron Investigation on the Precipitation Behaviour of Niobium Microalloyed Steel</li><li>Modeling of the Hot Rolling: Towards the Industrial Applicability</li><li>On the Dynamic Superplasticity</li><li>Effect of Oxygen Potential Gradient on Mass Transfer in Polycrystalline ?-Alumina at High Temperature</li><li>EBSD Analysis and Assessment of Porosity in Thermal Barrier Coatings Produced by Axial Suspension Plasma Spraying (ASPS)</li><li>Structure Formation in Ni Superalloys during High-Speed Direct Laser Deposition</li><li>Structures and Properties of Laser-Assisted Cold-Sprayed Aluminum Coatings</li><li>The Effect of Boron Addition on Precipitation and Hot Ductility of 1.5Mn-0.1Nb-Ti Carbon Steels in As-Cast Condition</li><li>New Metallurgy of Additive Manufacturing in Metal: Experiences from the Material and Process Development with Electron Beam Melting Technology (EBM)</li><li>Novel Bioreactor-System for <i>In Situ</i>-Cultivation of Artificial Tissue</li><li>Influence of Thermo- and HIP Treatments on the Microstructure and Mechanical Properties of IN625 Alloy Parts Produced by Selective Laser Melting: A Comparative Study</li><li>Modelling Yield Strength in an A6061 Aluminium Alloy</li><li>The 3D Imaging and Metrology of Microstructural Elements in Innovative Materials for Clean Energy Systems and Aeronautics</li><li>Effect of Layer-by-Layer Texture Inhomogeneity on the Stress Corrosion of Gas Steel Tubes</li><li>Effect of Prior Austenite Grain Size on Yielding Behavior of the Low-C Martensitic Stainless Steel</li><li>Sheet Forming Processes for AW-7xxx Alloys: Relevant Process Parameters</li><li>Resolving the Strength-Ductility Paradox through Severe Plastic Deformation of a Cast Al-7% Si Alloy</li><li>Osteoconductivity of Protein Adsorbed Titanium Implants Using Hydrothermal Treatment</li><li>Effect of Prior Strain on Damping Capacity and Mechanical Property during Heat Treatment</li><li>Welding of Automotive Aluminum Alloys by Laser Wobbling Processing</li><li>Mechanical Properties of Polymer-Based Hybrid Films: Tailoring the Hybrid Interface Using Soft Chemistry</li><li>Mechanical Behavior of a Metal Matrix Nanocomposite Synthesized by High-Pressure Torsion via Diffusion Bonding</li><li>Effect of CH₄ Content on the Characteristics of Surface Layers of Low Temperature Plasma Nitrided 2205 Duplex Stainless Steel</li><li>Separating Technology of Pure Zirconia from Zircon-Sand by the Ar-H₂ Arc Plasma Fusion and the Microwave Leaching</li><li>Atomic Layer Deposited Protective Layers</li><li>The Role of Preliminary Heat Treatment in the Formation of Ultrafine-Grained Structure in the Implementation of the Combined Process "Rolling - Equal Channel Angular Pressing"</li><li>The Study of the Microstructure of the Metal after Rolling Thick Workpieces of Nonferrous Metals and Alloys in Relief and Smooth Rolls</li><li>Gas Nitriding of High-Vanadium Alloy Steel</li><li>Morphology Evolution of Grain Boundary Carbides in Highly Twinned Inconel Alloy 600</li><li>Deep Ultraviolet Photodetector Based on Sulphur-Doped Cubic Boron Nitride Thin Film</li><li>Influence of Cu Doping on Martensitic and Magnetic Transitions in Ni-Mn-Sn Alloys</li><li>The Effect of Process Parameters in Interdendritic-Melt Solidification Control Technique on the Microstructure and Properties of a Ni-Base Superalloy</li><li>Affinity Viscosimetry Sensor for Enzyme Free Detection of Glucose in a Micro-Bioreaction Chamber</li><li>Experimental Bio-ESPI for Validation of Magnetic Induced Deformation on HeLa Cells</li><li>Microstructure of Z-Phase Strengthened Martensitic Steels: Meeting the 650 degreesC Challenge</li><li>Morphological Evolution of Carbides in DZ125 Superalloy during Heat Treatment</li><li>Quasi-Static and Dynamic Properties of Ti-3.5Al-2.5V-1.5Fe-0.25O Titanium Alloy Plates</li><li>Investigations on Hot Tearing Susceptibility and its Mechanism of Mg-Zn-Y Alloys</li><li>Analysis of the Static Recrystallization Behavior of Nb-Ti Microalloyed Steels Including Low Strain Levels</li><li>Macrosegregation of Alloying Elements in Hot Top of Large Size High Strength Steel Ingot</li><li>Influence of Coiling on Microstructural Evolution and Mechanical Properties of Strip-Cast Low-Carbon Low-Niobium Steel</li><li>Preparation and Squeeze Casting of Nano-SiC_P/A356 Composite Assisted with Ultrasonic Vibration Process</li><li>Enabling Diamond Deposition with Cold Spray through the Coated Particle Method</li><li>The Effect of Thermo-Mechanical Coupling on Microstructures and Tensile Properties of Al-Li 2198-T8 Alloy via Friction Spot Welding</li><li>Substituting of a Thermodynamic Simulation with a Metamodel in the Scope of Multiscale Modelling</li><li>A Novel Facility to Investigate Dust Mobilization in Confined Environments with Applications to the Security of the Pharmaceutical Industry</li><li>Thermal Desorption Spectroscopy Study on the Hydrogen Behavior in a Plasma-Charged Aluminum</li><li>Microstructure Evolution of a Directionally Solidified Ternary Eutectic Mo-Si-B Alloy</li><li>Friction Stir Welding on Light-Weight Metal - Aluminum Alloy Al6061</li><li>Characterization and Modelling of the Microstructure and Texture Evolution in AlMgSi-Extrusions</li><li>Oxidation of Fe-Al Alloys (5-40 at.% Al) at 700 and 900 degreesC</li><li>Influence of Niobium Content on the Hot Mechanical Behavior of Nickel Alloys</li><li>Effects of Hybrid Structures on the Stress Reduction and Thermal Properties of Joints in Electronics Devices</li><li>Formation of Hydrogen by Ball Milling of Mg and Mg Alloy in Seawater</li><li>Building Blocks for Artificial Extracellular Matrices Based on Cross-Linkable Polysaccharide and Glycosaminglycan Sulfates</li><li>Effect of Nature Chemical Linker on the Formation of a Zeolitic Layer on Zirconia Substrates</li><li>Boron Effect on Hardenability of High Thickness Forged Steel Materials</li><li>On the Elaboration of Metal-Ceramic Composite Coatings by Laser Cladding</li><li>Impact of the Confinement on the Intra-Cage Dynamics of Molecular Hydrogen in Clathrate Hydrates</li><li>Effects of ?+? Intercritical and ? Single-Phase Annealing on Texture Evolution in Cold-Rolled Dual-Phase Steel Sheets</li><li>Technical Challenges in Narrow-Gap Root Pass Welding during Tandem and Hybrid Laser-Arc Welding of a Thick Martensitic Stainless Steel</li><li>Microstructure Evolution during LCF of a 10%Cr Steel at Room Temperature</li><li>Influence of Severe Plastic Deformation on Mechanical Properties of an AA5024 Alloy</li><li>Thermomechanical Adhesion between Metallic Glass and Die Materials</li><li>Crystallographic Investigation of the Initial Solidification Grain Structure in Al-Si Alloy</li><li>Effect of Deformation Structure on Strength of a Low Alloyed Cu-Cr-Zr Alloy</li><li>Friction and Wear Properties of ?AlB₁₂-NiAl Cermet Prepared by Spark Plasma Sintering</li><li>Phase Stability and Mechanical Properties of Ti-Cr-Sn-Zr Alloys Containing a Large Amount of Zr</li><li>Microstructure of Rapidly Solidified Melt-Spun Ribbon in AlCoCrFeNi_2.1 Eutectic High-Entropy Alloys</li><li>Misorientation Measurement of Individual Grains in Fatigue of Polycrystalline Alloys by Diffraction Contrast Tomography Using Ultrabright Synchrotron Radiation</li><li>Development of a New Powder/Solid Composite for Biomimic Implant Materials by Electron-Beam Additive Manufacturing</li><li>Microstructure Formation of High Pressure Torsion Processed (? + ?) Two Phase Stainless Steel</li><li>Influence of Nano Reinforcement Volume Percentage on Fabrication of Surface Nanocomposite by FSP</li><li>Influence of Flash Treatment on Pseudoelastic Behaviour of Biomedical Ti-25Nb-3Zr-3Mo-2Sn Alloy</li><li>
<i>In Situ</i> Techniques for the Investigation of the Kinetics of Austenitization of Supermartensitic Stainless Steel</li><li>Metal Matrix Composites as Environment-Friendly Protective Coatings</li><li>Characteristic Features of the Modulated Structure Appearing in the Multiferroic Material Bi_1-<i>_x</i>Sm<i>_x</i>FeO₃ around <i>x</i> = 0.15</li><li>Iron-Water Interface under Electrochemical Condition</li><li>MgO Implanted in Rat Tibia Bone Marrow is Osteoinductive through the Formation of a Matrix, Containing Hydroxyapatite</li><li>Compressive Residual Stresses and Associated Surface Modifications Induced in Ti6Al4V by Laser Shock Processing</li><li>Deformation Microstructures and Mechanical Properties of an Austenitic Stainless Steel Subjected to Warm Rolling</li><li>Evolution of Microstructure and Mechanical Properties with Different Partitioning Conditions of Q&P Steels</li><li>Rapid Measurement of Texture of Metals by Time-of-Flight Neutron Diffraction at iMATERIA and its Applications</li><li>Application of Thermo-Calc TCFE7 to High-Alloyed Mottled Cast Iron</li><li>Deformation Behavior of Inhomogeneous Layered Microstructure</li><li>Fundamental Aspects of Rolled Zn Alloy Sheet Formability: Structure-Property and Failure Mode Relationships</li><li>Effect of Aluminum Content on Texture Formation Behaviors in Magnesium Alloy</li><li>Modeling and Simulation of Q&P Steels</li><li>Experimental Investigation of Welding Parameters on Automatic TIG Welding of Aluminium 5083 Plate</li><li>Modelling the Static Recrystallization Kinetics of Microalloyed TWIP Steels with Different Alloying Contents</li><li>Influence of Initial Heat Treatment on the Microhardness Evolution of an Al-Mg-Sc Alloy Processed by High-Pressure Torsion</li><li>Influence of Second Phases on the Superplasticity of Mg-Tm-Y-CeMM Alloys Containing LPSO-Phases</li><li>The Effect of High-Doze Neutron Irradiation on Texture and Substructure Condition of Cladding Tubes from Zr-Based Alloys</li><li>Effect of High Temperature Exposure on the Mechanical Properties of Self-Hardening Al-Based Alloy</li><li>Effect of Secondary Phases Precipitation on Corrosion Resistance of Duplex Stainless Steels</li><li>Modeling of Grain-Boundary Mobility and Nucleation Rate during Discontinuous Dynamic Recrystallization in Ni-Nb Alloys and a High-Purity Alloy Derived from SAE 304L</li><li>Evolution of Ni Structure under ECAP and DCAP and Further Annealing</li><li>Coupling of Computational Thermodynamics with Kinetic Models for Predictive Simulations of Materials Properties</li><li>Photolithography of 3D Scaffolds for Artificial Tissue</li><li>Fatigue Deformation Behavior of Fe-Mn-C-(Al) TWIP Steels</li><li>A Statistical Methodology to Reconstruct Nucleation Pathways in the Fe-Cu System</li><li>Solidification Behavior of Aluminum-Copper Based Alloy during Controlled Diffusion Solidification</li><li>Anti-Bacterial Nanocomposites by Silver Nano-Coating Fragmentation</li><li>Softening Kinetics of Plain Carbon Steels Containing Dilute Nb Additions</li><li>Biocompatible Ceramic-Biopolymer Coatings Obtained by Electrophoretic Deposition on Electron Beam Structured Titanium Alloy Surfaces</li><li>Neutron Diffraction Analysis of Light Alloys: A Review</li><li>Bridging the Gap between <i>Ab Initio</i> and Large Scale Studies - A Monte Carlo Study of Cu Precipitation in Fe</li><li>Innovative Surface Treatments of Titanium Alloys for Biomedical Applications</li><li>Laser Pulse Simulation of High Energy Transient Thermal Loads on Bulk and Plasma Sprayed W for NFR</li><li>Study on the Formation of Stray Grains during Directional Solidification of Nickel-Based Superalloys</li><li>Texture Characterization of Stainless Steel Cladded Layers of Process Vessels</li><li>Effect of Previous Grain Size on Recystallization Texture and the Formability of the Nb Ferritic Stainless Steel</li><li>The Behaviour of Graphitized Steels in Machining Processes</li><li>A New Approach for the Spectroscopic Detection of Different pH-Values</li><li>Influence of Long Heat Treatments on Hardness and Tribological Behaviour of HVOF Sprayed WC-CoCr and Cr₃C₂-25NiCr Coatings</li><li>Hot Deformation Behavior and Stability Criteria of WE54 Magnesium Alloy</li><li>Development of a 2.25%Cr Steel P23 Reinforced with Micro/Nano-Carbide Particles Produced by Self-Propagating High-Temperature Synthesis</li><li>Age Hardening Behavior of Al-Li Alloys Produced by Sand Mold Process</li><li>Effect of Silicide on Dynamic Recrystallization in Near Alpha Titanium Alloy</li><li>Manufacturing of ODS RAFM Steel: Mechanical and Microstructural Characterization</li><li>Shape Recovery of Polymeric Matrix Composites by Irradiation</li><li>Comparison of Microstructure and Mechanical Behavior of the Ferritic Stainless Steels ASTM 430 Stabilized with Niobium and ASTM 439 Stabilized with Niobium and Titanium</li><li>Recrystallization Kinetics and Texture Evolution of Nb Stabilized Ferritic 430 Stainless Steel Cold Rolled and Isothermal Annealed</li><li>Thermal Effect during Electromagnetic Pulse Welding Process</li><li>Re-Melting Technique with High Intense Pulsed Plasma Beams Applied for Surface Modification of Steel - Own Investigations</li><li>Effect of Preparation Conditions of TiB₂ Particle Dispersed Al Composites on Microstructure</li><li>X-Ray Stress Measurement of Austenitic Stainless Steel with cos? Method and Two-Dimensional X-Ray Detector</li><li>Physical Modelling of Metallurgical Processes</li><li>Effects of Particle Size on Fabrication of Al-TiO₂ Functionally Graded Materials by Centrifugal Mixed-Powder Method</li><li>Usability of Ti6Al4V Powder via Hydride-Dehydride Process for Selective Laser Melting Process</li><li>GaN Thin-Film-Depositions on Glass and Amorphous-SiO₂-Layer-Deposited Si Single-Crystalline Substrates</li><li>Influence of Different pH and Fluoride Addition on the Corrosion Behavior of the Sintered CoCr Alloy Ceramill Sintron Compared to the Cast Alloy Girobond NB</li><li>Liquid Composite Molding: A Widely Used Group of FRPC Processing Techniques, but still a Challenging Topic</li><li>Miniaturized Laser Power Sensor via Rapid Phototyping</li><li>Influence of Corrosive Conditions on the Mechanical Performance of Flow Drill Screw Joints between Light Metals</li><li>Calculation of the Stress Interaction between Dislocation Pile-Ups in Neighbouring Misoriented Grains</li><li>High-Pressure Synthesis of Skutterudite-Type Thermoelectric Materials</li><li>Development of Joining Method between Zircaloy and SiC/SiC Composite Tubes by Using Diode Laser</li><li>Kinetics of Submicrocrystalline Structure Formation in a Cu-Cr-Zr Alloy during Large Plastic Deformation</li><li>The Effects of Interfacial Heat Transfer Coefficient on the Microstructure of High-Pressure Die-Cast Magnesium Alloy AM60B</li><li>Cooling Curve Based Estimation of Mechanical Properties in High Strength Steel Welds</li><li>Features of Electronic States in the Highly-Correlated Electronic System Sr_1-<i>x</i>Nd<i>_x</i>MnO₃ around <i>x </i>= 0.50</li><li>Fluctuation of Position and Energy of a Fine Particle in Plasma Nanofabrication</li><li>Microstructure and Porous Defects of a Spray-Formed and Hot Worked 7000 Aluminum Alloy</li><li>Hot Torsion Tests - A Reliable Rolling Simulation Method for C-Mn Steels</li><li>Development of a Biomimetic Metallic Femoral Stem: Methodological Approach</li><li>The Issue of Grain Size Distribution Using Mean Field Models for Dynamic and Post-Dynamic Recrystallization</li><li>Measurement of Residual Stresses in Linear Friction Welded In-Service Inconel 718 Superalloy</li><li>Evaluation of the Hardening Capacity of Low-Alloyed Steels Quenched by HPGQ in Vacuum Furnaces</li><li>Mathematical Modelling of Steel Quenching</li><li>An Appraisal of Direct Quenching for the Development and Processing of Novel Super-High Strength Steels</li><li>Effect of Heat Treatment on the Microstructure Evolution of Ti-6Al-3Sn-3Zr-3Mo-3Nb-1W-0.2Si Titanium Alloy</li><li>Nb-Microalloying in Next-Generation Flat-Rolled Steels: An Overview</li><li>Advanced Evaluation of Fatigue Phenomena Using Non-Destructive Testing Methods</li><li>The Effects of Intercritical Annealing Temperature and Initial Microstructure on the Stability of Retained Austenite in a 0.1C-6Mn Steel</li><li>Microstructure Refinement in the CoCrFeNiMn High Entropy Alloy under Plastic Straining</li><li>Novel ESPI Measurement Prototype for Analyzing Biological Samples from Cell Culture Technique</li><li>Electron Beam Welding of TZM Sheets</li><li>Systematic Investigation of the Temperature Field in Atmospheric Plasma Processing (APP)</li><li>Effect of As-Rolled Microstructure on Static Recrystallization Characteristics and Texture Evolution during Annealing</li><li>Use of Carbon Nanomaterials as a Catalyst Support in Fuel Cells</li><li>Effect of the Interfacial Thermal Resistance on Effective Thermal Conductivity of Al/SiC Particle-Dispersed Composites</li><li>Influence of ?-Mg₁₇Al₁₂ Phase on Initial Pitting Process of AZ91D Magnesium Alloy</li><li>The Low-Nickel Cryogenic Steel Alloyed by Nitrogen</li><li>Three-Dimensional Dynamic Explicit Finite Element Analysis of Charpy Impact Test</li><li>Microstructure Observations of Graphite in Gray Cast Iron Using TEM</li><li>Dispersion of CNTs in Selective Laser Melting Printed AlSi10Mg Composites via Friction Stir Processing</li><li>Design and Characterization of Conductive Biopolymer Nanocomposite Electrodes for Medical Applications</li><li>Thermal Joining of Highly Conductive Bonds by Using Reactive Al-Ni Nanofoils</li><li>Relationship between Microstructure and Mechanical Properties in Q&P-Steels</li><li>Progress in the Understanding of the Microstructure Evolution of Direct Laser Fabricated TiAl</li><li>Microstructure and Properties of Al-12.7Si-0.7Mg Alloy Extrusion after End-Quenching Test</li><li>Microstructure Evolution and Creep Properties of a Single Crystal Nickel-Based Superalloy with Various Orientations</li><li>Effect of SPD Processing Technique on Grain Refinement and Properties of an Austenitic Stainless Steel</li><li>Effect of Tempering on Microstructure and Creep Properties of P911 Steel</li><li>? Phase Transformation and Mechanical Properties in Binary Zr-Nb Biomedical Alloy</li><li>Ti-Cu-Based Amorphous Powders Produced by Ball-Milling</li><li>Development of the Advanced TBC for High Efficiency Gas Turbine</li><li>Fabrication of High Porosity Mullite Foams and their Thermal Properties</li><li>Influence of Thermomechanical Treatment on the Damping Capacity of Selected Magnesium Alloys</li><li>Effect of ? Number of Transition Metals on the Cohesive Properties of Cr-Ni-Base Alloys</li><li>Reverse Transformation Behavior Induced by Shot-Peening for SUS410S Martensitic Stainless Steel</li><li>Nonlinear Optimization Methods for the Determination of Heat Source Model Parameters</li><li>Effects of Cross-Rolling on Deformation Texture Evolution in Unalloyed Titanium</li><li>High-Temperature Mechanical Properties and Constitutive Modelling of Ti6Al4V Sheets</li><li>Early Instability Phenomena of IN792 DS Superalloy</li><li>Effect of Heat Treatments on TiH₂: Surface Composition and Hydrogen Release</li><li>Texture Gradient through Thickness of a Cross Roll-Bonded AA5754/AA6061 Aluminum Composite</li><li>Shock-Induced Reaction Characteristics of an Al/Ni Composite Processed via Accumulative Roll-Bonding</li><li>Effects of Initial Micro-Structures on Deformation Behaviors of Commercial Pure Titanium</li><li>Microstructural Evolution of AZ31 under the Application of High Density Electric Current Pulses</li><li>Martensitic Transformation and Crystal Structure Characterization of Ni-Fe-Ga-Co Ferromagnetic Shape Memory Alloys</li><li>Refined and Uniform Microstructure with Superior Mechanical Properties in Medium Plate Microalloyed Steel with Reduction in Mn-Content during Ultrafast Cooling</li><li>Linear Friction Welding of IN718 to Ti6Al4V</li><li>Electron Beam Welding of High Strength Quenched and Tempered Steel</li><li>Saturation of Deformation Twinning in Magnesium Alloys</li><li>Temperature Field Evolution during Flash Butt Welding of Railway Rails</li><li>Effects of Microalloy Additions and Thermomechanical Processing on Austenite Grain Size Control in Induction-Hardenable Medium Carbon Steel Bar Rolling</li><li>Dissimilar Electron Beam Welds of Nickel Base Alloy A625 with a 9% Cr-Steel for High Temperature Applications</li><li>Influence of NbC-Precipitation on Hot Ductility in Microalloyed Steel - TEM Study and Thermokinetic Modeling</li><li>Modification Effects of Sb on Al7SiMg Alloy Measured with Cooling Curve Analysis</li><li>Numerical Simulation of Pore Evolution of 7050 Aluminum Alloy during Hot Compression Process</li><li>Defects and Charging Processes in Li-Ion Battery Cathodes Studied by Operando Magnetometry and Positron Annihilation</li><li>Processing and Thermoelectric Properties of New Si-/ Se-/ Sn-Based Intermetallics</li><li>Microstructure of Fiber Laser Deposited WC-Co Cemented Carbide and Carbon Steel</li><li>Effect of Continuous Annealing Temperature on Microstructure and Mechanical Properties of a High Strength Cold-Rolled DP980 Steel</li><li>Framework Structures for Mg Battery Cathodes</li><li>Further Study on the Effect of Environment on Fatigue Crack Growth Behavior of 2000 and 7000 Series Aluminum Alloys</li><li>Crystallographic Features of Electronic States in the Highly-Correlated Electronic System Sr_1-<i>_x</i>Sm<i>_x</i>MnO₃ around <i>x</i> = 0.50</li><li>Effect of Nitrogen on Age-Hardening of Metastable Austenitic Stainless Steel after Cold Drawing</li><li>Effect of Chlorine Atoms for Development of Aluminum Corrosion</li><li>Initiation and Propagation Behaviors of Small Crack in a Polycrystalline Ni-Base Superalloy under Thermo-Mechanical Fatigue Loading</li><li>Crystal Structure, Microstructure and Martensitic Transformation Path in Ni-Mn-In Alloys</li><li>Effect of Grain Size on Oxidation Resistance of Unalloyed Titanium</li><li>Grain Boundary Engineering of ECAPed OFHC Copper</li><li>Microstructure Evolution of Laser Direct Metal Deposition of M2 High Speed Steel</li><li>Mg-Zn-Y Alloys with Long-Period Stacking Ordered Phases: Deformation, Creep, Solute Segregation and Strengthening Mechanisms at Elevated Temperatures</li><li>Deformation Behavior of Fe-Al-Co-Ti Single Crystals Containing Co₂AlTi Precipitates</li><li>Effect of Added Elements on Microstructures and Joint Strength of Lead-Free Sn-Based Solder Joint Dispersed IMC Pillar</li><li>Crystallographic Features of the State Appearing in the Multiferroic Material Bi_1-<i>_x</i>La<i>_x</i>FeO₃ around <i>x</i> = 0.20</li><li>Influence of Grain Size on Work-Hardening Behavior in 12Cr Stainless Steel</li><li>RETRACTED PAPER: Evaluation of Parameters Effect on Microstructure and Mechanical Properties in TIG Welding of A105 to A106 Steels</li><li>The Effect of Sc Addition on Microstructure in Mg-Gd Alloys</li><li>Comparison of Self-Annealing Behaviors in (001)- and (111)-Oriented Electrodeposited Silver Films by <i>In Situ</i> EBSP Analysis</li><li>Effect of Friction Stir Welding on Microstructure of a 5024 Alloy</li><li>Microstructure and Property of Fe-Based Alloy Modified Layer on 304 Stainless Steel by High-Energy Pulse Laser-Like Cladding (HPLC)</li><li>Microstructures and Properties of Aluminum Alloys during Repetitive Continuous Extrusion Forming</li><li>The Portevin-Le Chatelier Effect and Kinematics of Deformation Bands in an Al-Mg-Sc Alloy: Effect of Grain Size</li><li>Effects of Hydraulic Pressure on Shape Accuracy of Drawn Circular Cups during Micro Hydro Deep Drawing</li><li>Kinetics of Microstructure Refinement in Titanium Alloys during Deformation</li><li>Needle Like Fe-Containing Intermetallic Compounds of High Silicon Aluminum Alloy with Fe Modified by Mn and Ultrasonic Vibration</li><li>Microstructure and Mechanical Properties of Medium Manganese Steel Plate with High Strength and Toughness</li><li>Effect of Mischmetal Additions and Solution Heat Treatments (T4) on the Microstructure and Mechanical Properties of Thixocast ZK60-RE Magnesium Alloys</li><li>Dissimilar Friction Stir Welding of HSLA Steel to Austenitic High-Mn TRIP Steel</li><li>Effects of Warm Working on Microstructural and Shear Deformation Properties of TRIP-Aided Martenitic Steel</li><li>Characterization of Phase Transitions Occurring in Solution Treated Ti-15Mo during Heating by Thermal Expansion and Electrical Resistance Measurements</li><li>Microstructure and Creep Properties of Silicon- and/or Germanium-Bearing Near-? Titanium Alloys</li><li>Formation and Dissolution of Hydride Precipitates in Zirconium Alloys: Crystallographic Orientation Relationships and Stability after Temperature Cycling</li><li>Research on Microstructure Evolution in Al-9.8Zn-2.0Mg-1.8Cu Alloy during Solution Treatment</li><li>Concurrent Validity of a New Contact Mat for Estimating Vertical Jump Height</li><li>The Use of Vibrotactile Stimulation for Improving Manual Tasks in Parkinson's Disease Patients</li><li>Evaluating Athletic Performances with a Real Time Location and Tracking System</li><li>Otoacoustic Emissions as a Promising Diagnostic Tool for the Early Detection of Mild Hearing Impairment - Technical Advances in Acquisition, Analysis and Modeling</li><li>Near Infrared Device for Tissue Inflammation Evaluation</li><li>Evolution of Recrystallization Textures in Cold-Rolled Commercially Pure Aluminum</li><li>Change in Mechanical Strength and Bone Contact Ratio of Beta-Type TNTZ Subjected to Mechanical Surface Modification</li><li>Tensile and Fatigue Properties of Miniature Size Specimens of Sn-5Sb Lead-Free Solder</li><li>Effect of Sr Addition on the Solidification Structure in Al-6mass%Mg-3mass%Si Alloy</li><li>Analysis of Recrystallization Behavior of Hot-Deformed Austenite Reconstructed from EBSD Orientation Maps of Lath Martensite</li><li>Superplasticity of Friction-Stir Welded Al-Mg-Sc Alloy with Ultrafine-Grained Microstructure Obtained by Warm Severe Plastic Deformation</li><li>Complex Nano-Scale Structures for Unprecedented Properties in Steels</li><li>The Effect of Thermomechanical Processing Temperature-Strain-Time Parameters on the Mesostructure Formation</li><li>Thermal Conductivity of Cubic Boron Nitride (cBN) Particle Dispersed Al Matrix Composites Fabricated by SPS</li><li>Lightweight Sandwich Structures in Innovative Vehicle Design under Crash Load Cases</li><li>Recrystallization Twinning in Stable Single Crystals of Cu-2%Al and Al-1%Mn Alloys</li><li>Effects of Magnetic Field Intensity on Carbon Diffusion in Pure Iron in Paramagnetic Ferrite Region</li><li>Solidification of Al-Pb Alloy under the Effect of Micro-Alloying Element Ti and C</li><li>
<i>In Vitro</i> Assessment of Hydroxyapatite Coating on the Surface of Additive Manufactured Ti6Al4V Scaffolds</li><li>Aging Property of AZ91D Magnesium Alloy Screw Thread-Rolled at Room Temperature Using Extrusion-Torsion Simultaneous Processing</li><li>Continuous Modeling of Dislocation Cores Using a Mechanical Theory of Dislocation Fields</li><li>Simultaneous Precipitation and Recrystallization during Hot Deformation of Ti, Nb and V Microalloyed Steel</li><li>Solid-State Bonding of 5052 Aluminum Alloy/316L Stainless Steel by Using Organic Salt Formation/Decomposition Reaction</li><li>Theoretical Study of Local Electric Conductive Properties by Electronic Tension Density</li><li>Influence of a Direct Current on the Solidification of Immiscible Alloys</li><li>Stereolithographic Additive Manufacturing of Ceramic Components by Using Nanoparticle Paste Feeding</li><li>Revealing the Individual Hardening Effects of Twins, Dislocations, Grain Boundaries and Solid Solution in a Twinning-Induced Plasticity Steel</li><li>Development of High-Performing Extruded Magnesium Alloy</li><li>Scalable Methods to Obtain Superhydrophobicity onto Metallic Surface</li><li>High Temperature Mechanical Properties of Harmonic Structure Designed SUS304L Austenitic Stainless Steel</li><li>Effect of Misch Metal Addition on Thermal Conductivities and Mechanical Properties of Mg-4Zn-0.5Ca Alloys</li><li>Thermo-Mechanical and Low Cycle Fatigue Failure Behavior Relevant to Temperature Regime in a TBCed Superalloy Specimen</li><li>Osteoconductivity of Superhydrophilic Ti- and Zr-Alloy for Biomedical Application</li><li>Microstructure and Mechanical Properties of Nb Alloyed Steel Processed by Hot Equal Channel Angular Extrusion</li><li>Dissimilar Metal Joining of A5052 Aluminum Alloy and AZ31 Magnesium Alloy Using Laser Brazing</li><li>Study of the Precipitation of Secondary Phases in Duplex and Superduplex Stainless Steel</li><li>Practical Use of Computer Model STAN 2000 for Improvement and Creation of Regimes for Hot Rolling of Steels on SEVERSTAL Mill 2000</li><li>Electrochemical Behaviors of Biomedical Nanograined <i>?</i>-Type Titanium Alloys</li><li>Evolution of Microstructure and Microhardness in Ti-15Mo ?-Ti Alloy Prepared by High Pressure Torsion</li><li>Superelasticity of Ti-Nb-Zr Alloys and their Medical Application</li><li>Microstructure of AZCa912 Continuous Casting Bar after Hot Compression</li></ul>