Progress of Machining Technology

Study on Bioforming Technology of Bionic Micro-Nano StructuresThe Development Trend of Cutting ToolsBending Fatigue Characteristics of WC-?t-Co AlloysStress in Diamond Coatings on Cutting Tools Deposited by Hollow Substrate HolderTool Life Improvement of Coated Carbide Tools Treated by Novel Nitriding Technique A New Method for Profiling Gear Plunge Shaving Cutter on Gear Shaving MachineInfluence of Tapping Conditions and Tool Geometries on Tool Life in Tapping of Inconel 625?An Experimental Study on Suppression of Chatter Vibration with Different Helix Angles End-MillResearch on Fabricating CVD Diamond Microstructures Using RIE ProcessStudy on Micro Drilling ? Rotating Bending Fatigue of Micro Carbide DrillsStudy on Precision Polishing Using Gelatin StoneMachining of Difficult-to-Cut Materials with a Lubricant Coated ToolPractical Measurement and Evaluation of Thermal Behavior of NC Lathe and its Application to Turning Process ModificationAnalysis on the Instantaneous Stiffness of the 3-RPS Parallel MachineResearch on Machining Methods for Non-Circular Isometric ProfileThe Error Analysis on Tooth Profiles with Electroplated CBN Hard Gear-Honing-ToolsExperimental Research on Wear Resistance of Deep Cryogenic Treated HSS Twist DrillNovel Positioning Devices for Ultraprecision Machine ToolResearch on the Method of Improving Accuracy of Parallel Machine ToolsStudy on the Accuracy of 3-RPS Parallel Machine ToolsA Novel Determination Algorithm of Locating Parameters for Fixture DesignThe Technical Study on Cylinder Cam MachiningDevelopment of Novel XY Micropositioning StageOptimization of Distribution Model for CNC Lathes Early FailuresGrey System Theory Modeling for Nonlinear, Dynamic Machine Tool Thermal ErrorResearch on Intelligent Controller for EDM Online ParametersLaser-Assisted Truing for Metal-Bonded Diamond WheelResearch on Mechanics and Control Methods of a New Loading Structure Based on Stewart PlatformPrinciple and Experiment of PRS-XY Hybrid NC Machine ToolDynamic Characteristic Analysis and Validation of Spindle Assembly of High Speed Machine ToolStudy on Machine Accuracy of the Serial-Parallel Machine Tool Based on the BP Neural NetworkKinematics Simulation of a Tripod Parallel Universal WristDimensional Designing Study on a Novel 3-RPS Parallel MachineBasic Study on the Development of the General Purpose Vertical Milling Machine for Educational Skill TrainingNovel Precision PZT-Driven Micropositioning Stage with Large Travel RangeThe Study of Constant Grinding Removal Rate Model of Turning-Grinding Composite Machine ToolResearch on the Integrated Design of Dual Mass Flywheel CAD/CAE/CAMStudy of Virtual Numerical Control Milling Simulation SystemConstruction of Lander Multidisciplinary Optimization PlatformA Study on a Tool to Support Configuration Design of 5-Axis Machine ToolsAgile Manufacturing Data ManagementIntelligent MES Based on RFIDToolpath Optimization on Automatic Removal Uncut and ApplicationFlank Milling for Blisk with a Barrel Ball Milling CutterEquipment Integration-Based Workshop e-Manufacturing Execution Mode and Supporting TechnologiesE-Enterprise Framework and Operation Mode for Manufacturing EnterprisesAutomatic Process Learning to Restore Omitted 2D DrawingsA Tool-Path Interpolation Algorithm Based on Unfolding-Bending Parametric CurvesA Collaborative Design and Analysis Environment for Flexible FixtureCollaborative Manufacturing Unit Selection Using a Sorting Adaptive Genetic Algorithm in Networked EnvironmentPart Recognition Based on Maximum Mutual InformationApplication of Virtual Manufacturing to Impeller Five-Axis High Speed MachiningTemplate-Based Process Planning System for Special BearingDevelopment of Advanced NC Geometric Cutting SimulatorDevelopment of Novel NC Machining System for Non-Circular ShaftsStudy on Three-Level Matching Model of Product Configuration Oriented to Mass CustomizationFive-Axis Machining Tool Vector Control of ImpellerA Petri Net and Genetic Algorithm Based Method for Flexible Manufacturing Cells Modeling and SchedulingA Strategy of Toolpath Generation for Finish Machining of Mold Cavity Based on Tool-Zmap ModelResearch on NC Manufacturing Technique of Double Conical ScrewSimulation-Based Manufacturing Interoperability Standards and TestingResearch about Web Services Based Integration of Manufacturing Process InformationFive-Axis Flank Milling of Sculptured Surface with Barrel CuttersIntegrated Process Planning Based on 3D Product ModelsDynamic Stress and Deformation of Non-Homogeneous Poroelastic Shells of Revolution Saturated in Viscous FluidStudy on Green Design and Biodegradability of B-Containing Water-Based Cutting FluidStudy on Metabolic System for Water-Soluble Coolant ? Machining Performance and Long-Term Stability of Recycled CoolantInfluence of Antirusting Aggent on the Cobalt Leaching of the Cemented Carbide ToolThe Assist Effect of Nitrogen Atmosphere on MQL Cutting PerformanceExperimental Research on Cutting Heat Dissipation under Various Cooling ConditionsImportance of MQL Media Composition in Near-Dry Machining of AluminumA Micromilling Experimental Study on AISI 4340 SteelSurface Modification of Stainless Steel for Surgical Tool by EB-PolishingHigh-Efficient Damage-Free Correction of the Thickness Distribution of Quartz Crystal Wafer Using Open-Air Type Plasma CVMDeformation in Mono-Crystalline Silicon Caused by High Speed Single-Point Micro-CuttingStudy on Cutting of Micro Channel by End Mill with Small DiameterStudy on Ultra Precision Polishing of Single Crystal Diamond Substrates under Ultraviolet Irradiation Ultra-Precision Machining of Dies for Microlens Arrays Using a Diamond Cutting ToolMicro Machining of Three-Dimensional Microstructure with the Tiny-Grinding Wheel Based on the Electro-Magneto-Rheological EffectEffect of Potential Function on Molecular Dynamics Simulation of Copper ProcessingImprovement of Thickness Uniformity of Bulk Silicon Wafer by Numerically Controlled Local Wet EtchingFiguring of Elliptical Neutron Focusing Mirror Using Numerically Controlled Local Wet EtchingUltra Precision Diamond Shaping of an Elliptical Micro-Lens ArrayMirror Finishing of Austenitic Stainless Steel with a Cermet InsertStudy on Precision Finishing of PCD by Constant-Pressure Grinding and UV-PolishingThe Investigation of Tool Wear in Metal Machining Using Finite Element MethodAn Analytical Evaluation of Drilling TemperaturePrediction and Avoidance of Chatter in Milling of Thin-Walled StructureOff-Line Feedrate Optimization Based on Simulation of Cutting ForcesQuantitative Study of Shear Localization in Chip Formation while Machining Ti-6Al-4VCutting Mechanism of Sulfrized Free-Machining SteelThermal-Mechanical Effect on Temperature/Stress Distribution when Orthogonal Cutting Bearing SteelIn-Process Recognition of Chip Forms Using Dynamic Cutting Force Components in Hard TurningInfluence of WC and Co in Cutting Cemented Carbides with PCD and CBN ToolsDynamic Simulation and Analysis of Centrifugal Barrel Surface Finishing Based on 3D Discrete Element MethodModelling the Polishing Efficiency of Polycrystalline Diamond Composites by the Dynamic Friction MethodEffect of Cutting Edge Roundness on Work Hardened Surface Layer in Metal CuttingStudy on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic ModelCutting Parameters Optimization of Thin-Walled Workpiece Based on Deflection ControlDevelopment of Multiscale Simulation System for Nano-ProcessesStudy on Machining Error in Ball End Milling of Spherical SurfaceMaterial Removal Model of Sapphire Substrate in Double-Side Lapping ProcessExperimental and Numerical Study of Cutting Forces and Temperature Fields when Dry Turning Aluminum AlloyThe Relationship between Dynamic Components of Cutting Force and Adhesion of Tool-Chip InterfaceStudy on the Chip-Breaking Behavior under the Concept of Equivalent Parameters for Complicated Groove Insert in 45 Cutting SteelMCA Model for Chip Breaking and Curling of Orthogonal CuttingSimulation and Analysis for Application of Truing Ring in Certain Eccentricity Plane Lapping SystemA New Approach for Friction Modeling at the Tool-Chip Interface in Orthogonal CuttingCalculation of Material Flow in Orthogonal Cutting by Using Streamline ModelApplication of a Drill Resistance Technique for Rapid Determining Wood DensityGeneration of Wear Protective Layer in High Speed Turning of Gray Cast Iron Containing Aluminium and MagnesiumMechanism of Material Softening in Primary Shear Zone during Serrated Chip Formation in High Speed Machining of High Strength SteelA Feedrate Scheduling Strategy Based on a General Force ModelStatistical Research on the Effects of Cutting Edge Preparation on Face Milling of Austenitic Stainless Steel Using FEMDetermining Modulus of Elasticity of Structural Lumber with Vibration MethodsResearch on Warpage Deformation of Machining Cantilever Sheet Part with Combined Saw Milling ToolDetermination of the Flow Stress of Ti6Al4V Based on Cutting Experiment and OptimizationCutting Tool Edge Temperature in Finish Hard Turning of Case Hardened SteelStudy on Deep Hole Honing Based on Squeeze Film TechnologyStudy on the Abrasive Effecting Factors of the Removal Rate during Dual-Lapping Sapphire WaferExperimental Investigations into Roughness Finished by Abrasive Jet with Grinding Wheel as RestraintAn Investigation into Integrate the Surface Hardening with the Grinding Precision FinishingStudy of Magnetic Abrasive Finishing to Thin Sleeve of Al AlloyResearch of the Dynamic Abrasive Particles FieldMechanical Grinding: An Effective Method to Control the Conductivity of p-Toluene Sulfonic Acid Doped Polypyrrole Study on Edge Contact Area and Surface Integrity of Workpiece in Point Grinding ProcessAn Experimental Study on Composites Machining Using Abrasive Water Jet TechnologyDynamic Simulation and Cutting Conditions Optimization of Tee Slot Milling Based on CutPro SoftwarePredictive Tool Life Model of CBN in Ti6Al4V High Speed Turning and Cutting Parameter OptimizationFinite Element Analysis on Segmented Chip Formation for High Speed Cutting of Ti6Al4V AlloyEffect of Co Content and WC Grain Size on Wear Resistance of Micro Carbide Endmills in High Speed Milling of GraphiteTaguchi Method Based Experiments of Titanium TC11 Flank Milling ParametersApplication of Minimum Quantity Lubrication when Drilling Nickel-Based Superalloy at High Cutting SpeedDesign of Angle Adjustable Electrochemical Micro-Machining SystemInvestigation of Surface Treatment Method by High-Speed Scanning of Single-Mode Fiber Laser with MOPAEffect of Ultrasonic Vibration of Tool on Electrical Discharge Machining of Sintered NdFeB MagnetThe Micro-Mechanism of Vibration Cutting Stress Wave and the Analysis of Macro-Processing EffectStudy on Electrical Discharge Machining Characteristics of Electrically Conductive CeramicsThe ?Effective Region? Characteristic of the Tool Life in Vibration Drilling Effect of Thickening Agent on Water-Based Working Fluid for EDMExperimental Research on Pulse Generator for EDM of Non-Conductive CeramicsStudy on Cavitation Aided Abrasive Machining on Glass Simulation Research on the Swirling Airflow Compounded with Magnetic-Field FinishingA Denoise Method of Electrical Discharge Machining Gaps Signal for Non-Conductive Engineering Ceramics Based on Wavelet MMAEffect of Electrode Insulation Thickness on Size Accuracy of Bored Hole in ECD ProcessPrevention of Burr Formation in Face Milling of Carbon Steel by Laser Hardening The Optimization of Processing Parameters and Experimental Investigation on Ni-Based Components Fabricated by Laser Cladding Design of a Simultaneous Module Using Burnishing and Electrofinishing on Hole-Wall Surface The Analysis on the Stability of Diamond Wire Saw Cutting Process for the Silicon Influence of On-the-Machine Laser Hardening on Machinability of Carbon Steel in TurningUltrafine-Grained Treatment Process on FGH4096 AlloyStudy on Bio-Limited Forming Technology Based on the Nano-Composite Electroless CoatingEffect of Surface Topography on Stress Distribution of Vacuum Plate Glass for Different Aluminum Alloy Braced PillarsCutting Characteristics of CFRP Materials with End MillingExperimental Characteristics of Aluminum Alloys in Dry End MillingNumerical Analysis of Surface Residual Stress of NC Milling 7075-T7451 Aluminum Alloy Gloss Evaluation Method for Metal Surface with Hairline Using Patterned Area Illumination Experimental Study on the Cutting Temperature Using Work-Tool Thermocouple while Machining TC4Study on the Surface Integrity of Micro-Ultrasonic Machined Glass-Ceramic Material