Progress of Machining Technology

Committees
Preface
Keynote Papers
Study on Bioforming Technology of Bionic Micro-Nano Structures
The Development Trend of Cutting Tools
I. New Tool Materials and New Abrasive Tools
Bending Fatigue Characteristics of WC-?t-Co Alloys
Stress in Diamond Coatings on Cutting Tools Deposited by Hollow Substrate Holder
Tool Life Improvement of Coated Carbide Tools Treated by Novel Nitriding Technique
A New Method for Profiling Gear Plunge Shaving Cutter on Gear Shaving Machine
Influence of Tapping Conditions and Tool Geometries on Tool Life in Tapping of Inconel 625 (R)
An Experimental Study on Suppression of Chatter Vibration with Different Helix Angles End-Mill
Research on Fabricating CVD Diamond Microstructures Using RIE Process
Study on Micro Drilling - Rotating Bending Fatigue of Micro Carbide Drills
Study on Precision Polishing Using Gelatin Stone
Machining of Difficult-to-Cut Materials with a Lubricant Coated Tool
II. New Machine Tools and Tooling Technology
Practical Measurement and Evaluation of Thermal Behavior of NC Lathe and its Application to Turning Process Modification
Analysis on the Instantaneous Stiffness of the 3-RPS Parallel Machine
Research on Machining Methods for Non-Circular Isometric Profile
The Error Analysis on Tooth Profiles with Electroplated CBN Hard Gear-Honing-Tools
Experimental Research on Wear Resistance of Deep Cryogenic Treated HSS Twist Drill
Novel Positioning Devices for Ultraprecision Machine Tool
Research on the Method of Improving Accuracy of Parallel Machine Tools
Study on the Accuracy of 3-RPS Parallel Machine Tools
A Novel Determination Algorithm of Locating Parameters for Fixture Design
The Technical Study on Cylinder Cam Machining
Development of Novel XY Micropositioning Stage
Optimization of Distribution Model for CNC Lathes Early Failures
Grey System Theory Modeling for Nonlinear, Dynamic Machine Tool Thermal Error
Research on Intelligent Controller for EDM Online Parameters
Laser-Assisted Truing for Metal-Bonded Diamond Wheel
Research on Mechanics and Control Methods of a New Loading Structure Based on Stewart Platform
Principle and Experiment of PRS-XY Hybrid NC Machine Tool
Dynamic Characteristic Analysis and Validation of Spindle Assembly of High Speed Machine Tool
Study on Machine Accuracy of the Serial-Parallel Machine Tool Based on the BP Neural Network
Kinematics Simulation of a Tripod Parallel Universal Wrist
Dimensional Designing Study on a Novel 3-RPS Parallel Machine
Basic Study on the Development of the General Purpose Vertical Milling Machine for Educational Skill Training
Novel Precision PZT-Driven Micropositioning Stage with Large Travel Range
The Study of Constant Grinding Removal Rate Model of Turning-Grinding Composite Machine Tool
III. Digital Design and Manufacturing
Research on the Integrated Design of Dual Mass Flywheel CAD/CAE/CAM
Study of Virtual Numerical Control Milling Simulation System
Construction of Lander Multidisciplinary Optimization Platform
A Study on a Tool to Support Configuration Design of 5-Axis Machine Tools
Agile Manufacturing Data Management
Intelligent MES Based on RFID
Toolpath Optimization on Automatic Removal Uncut and Application
Flank Milling for Blisk with a Barrel Ball Milling Cutter
Equipment Integration-Based Workshop e-Manufacturing Execution Mode and Supporting Technologies
E-Enterprise Framework and Operation Mode for Manufacturing Enterprises
Automatic Process Learning to Restore Omitted 2D Drawings
A Tool-Path Interpolation Algorithm Based on Unfolding-Bending Parametric Curves
A Collaborative Design and Analysis Environment for Flexible Fixture
Collaborative Manufacturing Unit Selection Using a Sorting Adaptive Genetic Algorithm in Networked Environment
Part Recognition Based on Maximum Mutual Information
Application of Virtual Manufacturing to Impeller Five-Axis High Speed Machining
Template-Based Process Planning System for Special Bearing
Development of Advanced NC Geometric Cutting Simulator
Development of Novel NC Machining System for Non-Circular Shafts
Study on Three-Level Matching Model of Product Configuration Oriented to Mass Customization
Five-Axis Machining Tool Vector Control of Impeller
A Petri Net and Genetic Algorithm Based Method for Flexible Manufacturing Cells Modeling and Scheduling
A Strategy of Toolpath Generation for Finish Machining of Mold Cavity Based on Tool-Zmap Model
Research on NC Manufacturing Technique of Double Conical Screw
Simulation-Based Manufacturing Interoperability Standards and Testing
Research about Web Services Based Integration of Manufacturing Process Information
Five-Axis Flank Milling of Sculptured Surface with Barrel Cutters
Integrated Process Planning Based on 3D Product Models
IV. Cutting/Grinding Fluids
Dynamic Stress and Deformation of Non-Homogeneous Poroelastic Shells of Revolution Saturated in Viscous Fluid
Study on Green Design and Biodegradability of B-Containing Water-Based Cutting Fluid
Study on Metabolic System for Water-Soluble Coolant - Machining Performance and Long-Term Stability of Recycled Coolant
Influence of Antirusting Aggent on the Cobalt Leaching of the Cemented Carbide Tool
The Assist Effect of Nitrogen Atmosphere on MQL Cutting Performance
Experimental Research on Cutting Heat Dissipation under Various Cooling Conditions
Importance of MQL Media Composition in Near-Dry Machining of Aluminum
V. Precision, Micro and Nano-Machining
A Micromilling Experimental Study on AISI 4340 Steel
Surface Modification of Stainless Steel for Surgical Tool by EB-Polishing
High-Efficient Damage-Free Correction of the Thickness Distribution of Quartz Crystal Wafer Using Open-Air Type Plasma CVM
Deformation in Mono-Crystalline Silicon Caused by High Speed Single-Point Micro-Cutting
Study on Cutting of Micro Channel by End Mill with Small Diameter
Study on Ultra Precision Polishing of Single Crystal Diamond Substrates under Ultraviolet Irradiation
Ultra-Precision Machining of Dies for Microlens Arrays Using a Diamond Cutting Tool
Micro Machining of Three-Dimensional Microstructure with the Tiny-Grinding Wheel Based on the Electro-Magneto-Rheological Effect
Effect of Potential Function on Molecular Dynamics Simulation of Copper Processing
Improvement of Thickness Uniformity of Bulk Silicon Wafer by Numerically Controlled Local Wet Etching
Figuring of Elliptical Neutron Focusing Mirror Using Numerically Controlled Local Wet Etching
Ultra Precision Diamond Shaping of an Elliptical Micro-Lens Array
Mirror Finishing of Austenitic Stainless Steel with a Cermet Insert
Study on Precision Finishing of PCD by Constant-Pressure Grinding and UV-Polishing
VI. Cutting Mechanisms, Analysis and Simulation
The Investigation of Tool Wear in Metal Machining Using Finite Element Method
An Analytical Evaluation of Drilling Temperature
Prediction and Avoidance of Chatter in Milling of Thin-Walled Structure
Off-Line Feedrate Optimization Based on Simulation of Cutting Forces
Quantitative Study of Shear Localization in Chip Formation while Machining Ti-6Al-4V
Cutting Mechanism of Sulfrized Free-Machining Steel
Thermal-Mechanical Effect on Temperature/Stress Distribution when Orthogonal Cutting Bearing Steel
In-Process Recognition of Chip Forms Using Dynamic Cutting Force Components in Hard Turning
Influence of WC and Co in Cutting Cemented Carbides with PCD and CBN Tools
Dynamic Simulation and Analysis of Centrifugal Barrel Surface Finishing Based on 3D Discrete Element Method
Modelling the Polishing Efficiency of Polycrystalline Diamond Composites by the Dynamic Friction Method
Effect of Cutting Edge Roundness on Work Hardened Surface Layer in Metal Cutting
Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model
Cutting Parameters Optimization of Thin-Walled Workpiece Based on Deflection Control
Development of Multiscale Simulation System for Nano-Processes
Study on Machining Error in Ball End Milling of Spherical Surface
Material Removal Model of Sapphire Substrate in Double-Side Lapping Process
Experimental and Numerical Study of Cutting Forces and Temperature Fields when Dry Turning Aluminum Alloy
The Relationship between Dynamic Components of Cutting Force and Adhesion of Tool-Chip Interface
Study on the Chip-Breaking Behavior under the Concept of Equivalent Parameters for Complicated Groove Insert in 45 Cutting Steel
MCA Model for Chip Breaking and Curling of Orthogonal Cutting
Simulation and Analysis for Application of Truing Ring in Certain Eccentricity Plane Lapping System
A New Approach for Friction Modeling at the Tool-Chip Interface in Orthogonal Cutting
Calculation of Material Flow in Orthogonal Cutting by Using Streamline Model
Application of a Drill Resistance Technique for Rapid Determining Wood Density
Generation of Wear Protective Layer in High Speed Turning of Gray Cast Iron Containing Aluminium and Magnesium
Mechanism of Material Softening in Primary Shear Zone during Serrated Chip Formation in High Speed Machining of High Strength Steel
A Feedrate Scheduling Strategy Based on a General Force Model
Statistical Research on the Effects of Cutting Edge Preparation on Face Milling of Austenitic Stainless Steel Using FEM
Determining Modulus of Elasticity of Structural Lumber with Vibration Methods
Research on Warpage Deformation of Machining Cantilever Sheet Part with Combined Saw Milling Tool
Determination of the Flow Stress of Ti6Al4V Based on Cutting Experiment and Optimization
Cutting Tool Edge Temperature in Finish Hard Turning of Case Hardened Steel
VII. Abrasive Machining
Study on Deep Hole Honing Based on Squeeze Film Technology
Study on the Abrasive Effecting Factors of the Removal Rate during Dual-Lapping Sapphire Wafer
Experimental Investigations into Roughness Finished by Abrasive Jet with Grinding Wheel as Restraint
An Investigation into Integrate the Surface Hardening with the Grinding Precision Finishing
Study of Magnetic Abrasive Finishing to Thin Sleeve of Al Alloy
Research of the Dynamic Abrasive Particles Field
Mechanical Grinding: An Effective Method to Control the Conductivity of p-Toluene Sulfonic Acid Doped Polypyrrole
Study on Edge Contact Area and Surface Integrity of Workpiece in Point Grinding Process
An Experimental Study on Composites Machining Using Abrasive Water Jet Technology
VIII. High Speed Machining
Dynamic Simulation and Cutting Conditions Optimization of Tee Slot Milling Based on CutPro Software
Predictive Tool Life Model of CBN in Ti6Al4V High Speed Turning and Cutting Parameter Optimization
Finite Element Analysis on Segmented Chip Formation for High Speed Cutting of Ti6Al4V Alloy
Effect of Co Content and WC Grain Size on Wear Resistance of Micro Carbide Endmills in High Speed Milling of Graphite
Taguchi Method Based Experiments of Titanium TC11 Flank Milling Parameters
Application of Minimum Quantity Lubrication when Drilling Nickel-Based Superalloy at High Cutting Speed
IX. Unconventional Machining
Design of Angle Adjustable Electrochemical Micro-Machining System
Investigation of Surface Treatment Method by High-Speed Scanning of Single-Mode Fiber Laser with MOPA
Effect of Ultrasonic Vibration of Tool on Electrical Discharge Machining of Sintered NdFeB Magnet
The Micro-Mechanism of Vibration Cutting Stress Wave and the Analysis of Macro-Processing Effect
Study on Electrical Discharge Machining Characteristics of Electrically Conductive Ceramics
The "Effective Region" Characteristic of the Tool Life in Vibration Drilling
Effect of Thickening Agent on Water-Based Working Fluid for EDM
Experimental Research on Pulse Generator for EDM of Non-Conductive Ceramics
Study on Cavitation Aided Abrasive Machining on Glass
Simulation Research on the Swirling Airflow Compounded with Magnetic-Field Finishing
A Denoise Method of Electrical Discharge Machining Gaps Signal for Non-Conductive Engineering Ceramics Based on Wavelet MMA
Effect of Electrode Insulation Thickness on Size Accuracy of Bored Hole in ECD Process
Prevention of Burr Formation in Face Milling of Carbon Steel by Laser Hardening
The Optimization of Processing Parameters and Experimental Investigation on Ni-Based Components Fabricated by Laser Cladding
Design of a Simultaneous Module Using Burnishing and Electrofinishing on Hole-Wall Surface
The Analysis on the Stability of Diamond Wire Saw Cutting Process for the Silicon
Influence of On-the-Machine Laser Hardening on Machinability of Carbon Steel in Turning
Ultrafine-Grained Treatment Process on FGH4096 Alloy
Study on Bio-Limited Forming Technology Based on the Nano-Composite Electroless Coating
X. Surface Integrity and Machining Quality
Effect of Surface Topography on Stress Distribution of Vacuum Plate Glass for Different Aluminum Alloy Braced Pillars
Cutting Characteristics of CFRP Materials with End Milling
Experimental Characteristics of Aluminum Alloys in Dry End Milling
Numerical Analysis of Surface Residual Stress of NC Milling 7075-T7451 Aluminum Alloy
Gloss Evaluation Method for Metal Surface with Hairline Using Patterned Area Illumination
Experimental Study on the Cutting Temperature Using Work-Tool Thermocouple while Machining TC4
Study on the Surface Integrity of Micro-Ultrasonic Machined Glass-Ceramic Material