Multi-functional Materials and Structures

Thermal Stress Simulations of SOFC Membrane-Electrode AssemblyFunctionally Gradient 3YSZ-IN713LC CompositesTime?Frequency Signal Analysis for Nondestructive Evaluation of Pile with CapParametric Study of Machining Effect on Residual Stress and Surface Roughness of Nickel Base Super Alloy UDIMET 720Nonlinear Acoustic NDE ? Qualitative and Quantitative EffectsThermal and Tensile Properties of PP Nanocomposite BlendsFormation of Chemical Elements under Superdeep Penetration of Lead Microparticles in Ferrous TargetShape Memory Alloy Combined with Piezoelectric Materials Applied for Structure Vibration ControlSensitivity in Large Deflection of Bossed and Pre-Tensioned Layered Plate under Lateral LoadUsing FEM Analysis for Evaluating Lifetime of the Turbine Blades Repaired by Different Kinds of Titanium and Nickel AlloysInfluence of Secondary Oxide Phases on Microstructural and Gas Sensitive Properties of Nanostructured Titanium Dioxide Thin FilmsDesign of Finish System Using Rotational Magnetic-Assistance in Ultrasonic Electrochemical Finishing of Freeform-SurfacesDevelopment of a Safety Network System for Highway Structures in Korea A Study on the Problems with Long-Term Bridge Monitoring Systems, and Suggested SolutionsSound Transmission through Lightweight All-Metallic Sandwich Panels with Corrugated Cores Development of Miniaturized Piezoelectric Multimode Transducer for Projection PurposeMacroscopic Differential Model for Hysteresis and Butterfly-Shaped Behavior in Ferroelectric MaterialsFeedback Linearization of Hysteretic Thermoelastic Dynamics of Shape Memory Alloy Actuators with Phase TransformationsCharacteristics of BNT Films Synthesized by a Hydrothermal MethodElectromagnetic Wave Shielding and Fire Retardant Multifunctional Polymer CompositesMultifunctional Polymer Composites for "Intellectual" Structures: Present State, Problems, FutureMonitoring Vibrating Structures Using PZT Impedance TransducersDevelopment of High Performance Fiber Reinforced Composite with Negative Thermal Expansion PropertyPrevulcanized Natural Rubber Latex/Modified Lignin Dispersion for Water Vapour Barrier Coatings on Paperboard PackagingSeamless Morphing Wing with SMP SkinKinetics of Martensitic Phase Decomposition in the Cu-10wt.%Al Alloy with Ag Additions Flame Stabilization and Emissions of a Natural Gas/Air Ceramic Porous BurnerPreparation of NbB2-Al2O3In Situ Composites by SHS Involving Thermite ReactionsEffects of Particle Size and Size Distribution on the Mechanical Properties of EPDM/Silica VulcanizatesA Novel Dynamic Absorber Using Enhanced Magnetorheological Elastomers for Powertrain Vibration ControlMechanical Behavior of Non Sintered and Sintered Steel WoolExperiments and Numerical Simulations of Interlocked MaterialsTemperature Effects on Guided Wave Structural Damage DetectionImprovement of Fatigue Strength and Impact Properties of Plain-Woven CFRP Modified with Micro Fibrillated CelluloseActive Vibration Control of Smart Hull Structure Using Piezoelectric Composite Actuators Design and Control of Magnetorheological Fluid-Based Multifunctional Haptic Device for Vehicle ApplicationsDamping Force Control of MR Damper for a Passenger Vehicle Considering Hysteretic CompensatorNatural Fiber Reinforced Plastic Foams from Plant Oil-Based ResinsA Planar Dielectrophoretic Microdevice for Particle ManipulationDevelopment of a Variable Stiffness and Damping Isolator Using Magnetorheological Fluid TechnologyPotentials of Plastic Optical Fibers for Sensor TechnologyMultifunctional Materials via Molecular Self-Organization into Liquid-Crystalline PhaseThe Influence of the Marine Bacterium Vibrio Natriegens Growth on Metallic Corrosion as Studied by Microscope TechnologiesSuper-Hydrophobic Surfaces Improve Corrosion Resistance of Fe3Al-Type Intermetallic in SeawaterInvestigation on Fe3Al Corrosion Behavior in Simulating Marine Biofilm EnvironmentCellular Morphology, Peel Strength and Thermal Conductivity for Wood/NR and Expanded EPDM Laminates for Roofing ApplicationsThe Influence of Aging Treatments on the Notched Tensile Strength of Ti-6Al-6V-2Sn Laser WeldsA Smart Flow Sensor for Flow Direction MeasurementDate Palm Tree Fiber as Polymeric Matrix Reinforcement, DPF-Polypropylene Composite CharacterizationSynthesis of Bi0.5(Na0.7K0.2Li0.1)0.5TiO3 Powders through Molten Salt MethodFacile Synthesis of Conducting Polypyrrole/Non-Aggregated Magnetite Nanocomposites and their Magnetorheological Characteristics Quantum Chemical and Electrochemical Studies on the Inhibitive Effect of Carboxymenthylchitosan for Mild Steel in Different PHsMultifunctional Performance of Europium-Doped Feldspar CeramicsThe Effect of Calcium Sulfate with Alloplast on the Periodontal Regeneration in One-Wall Intrabony Defect of Beagle DogsA Study on Ultrasonic Vibration Assisted Tapping of TitaniumVibration Damping of Automotive Driveshafts with Piezofiber Composite StructuresPositive Temperature Coefficient Behavior of the Graphite Nanofibre and Carbon Black Filled High-Density Polyethylene Hybrid Composites Swelling Behavior of Poly(Acrylamide) Nanoclay Composite HydrogelsMiscibility Behaviour of Polyethylene Oxide/Hydroxypropyl Methyl Cellulose BlendsSynthesis, Characterization of Phenethyltrimethoxysilane (PE) Modified Organic-Inorganic Hybrid Silicalite-1 Molecular Sieves and its Transformation into Solid Acid MaterialsMagnetorheological Fluids Behaviour in Tension Loading ModeStick-Slip Compensation of Micro-Positioning Using Elastic-Plastic Static Friction ModelCrack Growth Characteristics Evaluation Method in Ceramics Based on DT TechniqueStrain Transfer Models for Strain ActuatorsSolution-Responsive Shape-Memory Polymer Driven by Forming Hydrogen BondingNovel Magnetostrictive Bimetal Actuator Using PermendurMicro-Forming of Au49Ag5.5Pd2.3Cu26.9Si16.3 Metallic Glasses in Supercooled RegionFabrication and Characterization of Microscale Sensors for Strain Measurement in Flexible Polymer Heart Valve LeafletMicrostructure and Mechanical Properties of 0.63C-12.7Cr Martensitic Stainless Steel during Various Tempering TreatmentsFracture Behavior of Polypropylene /Elastomer BlendsSelf-Healing of Cracks in Epoxy CompositesMelamine Resin-Walled Microcapsules Containing Styrene: Preparation and CharacterizationSynthesis and Characterization of a Novel Epoxy with Improved ProcessabilityPreparation and Characterization of a Novel Flame RetardantAnalysis of the Novel Strain Responsive Actuators of Silicone Dielectric ElastomerMechanical Properties of Polybenzimidazole Reinforced by Carbon NanofibersHealth Monitoring of Laminate Plates with AE Signals and Wave Propagation Fabrication of Titania Film on NiTi Alloy by a Deposition-Assisted Advanced Oxidation MethodEffects of Electro-Fenton Process on Blood Compatibility and Nickel Suppression of NiTi Shape Memory AlloyPreparation and Properties of Nano-Silica Filled Self-Reinforced PolypropyleneDevelopment of the Green Composite Consists of Woodchips, Bamboo Fibers and BiodegradableTransport and Magnetic Properties of CrO2-Polymer Magnetic CompositesOxide Films Produced on Fe19Cr5Al Steel Coated with Al, Pt and Al+Pt Composite Nanofilms: Technological Aspects and Catalytic PropertiesCatalytic Destruction and Removal of Toluene by Microwave/Fe3O4 SystemUsing Catalyst and Electrolysis Diaphragm Method to Produce Multiple Oxidants to Remove the Scaling and Slime in Cooling SystemBio-Chemical Sensor Based on Smart MaterialStudy on Semi-Solid Magnesium Alloy Fabricated by Ultrasonic Stirring Method Optimization of Preparation of the TiO2 Photocatalytic Reactor Using the Taguchi MethodSynthesis and Characterization of Bamboo-Like Carbon NanotubesPreparation of Silica Nano-Rods by CVDSynthesis of Mono-Sized Silica Nanoparticles by Combustion TechniqueSynthesis of Straight Y-Shaped Silica NanorodsOptimization of Dimensions of a Sandwich Structure Using Genetic Algorithm (GA)Effect of Substrate Temperature and Incident Energy for Alloyzation of Co onto Cu(001) SubstrateThree-Dimensional Charge Redistribution of Ionic Polymer-Metal Composites with Uncertainty in Surface ConductivityInGaP/GaAs pnp Heterojunction Bipolar Transistor with d-Doped Sheet between Base-Emitter JunctionThermal Post-Buckling Analysis of Functionally Graded Panels in Hypersonic Airflows Distributed Pressure Sensing as Smart Mat Applications with Hetero-Core Fiber Optic Nerve Sensors Superdeep Penetration as the New Physical Tool for Creation of Composite MaterialsEffect of Flame Retardant on Mechanical Properties and Flammability of Sisal/PP CompositesFiber Bragg Gratings Array for Structural Health MonitoringPrecision Transfer and Replication of Ultrasonic NanoimprintThermal Degradation of Novel Exfoliated PLLA/LDH NanocompositesApplication of Schottky Bulk-Layer Design on Double-Heterojunction Pseudomorphic AlGaAs/InGaAs/AlGaAs High Electron Mobility Transistors (DH-HEMTs)Superdeep Penetration of the Microparticles Accelerated by Explosion in Metals and Alloys of IronNatural Rubber and EPDM Rubber as an Impact Modifier in Vetiver Grass-Polypropylene CompositesAn Impact Events Monitoring System for Wind Turbine BladesBionanocomposites of GrassAnalysis for Replication and Surface Roughness of Micro-Feature of Silicon Mold Insert by UV-LIGA MethodEffect of FGM on Film Quality of Al onto Cu(001) Substrate by Considering Incident Energy and Deposition RateInfluence of Low-Level Oxidation on Mechanical Property of Two-Dimension Carbon/Carbon CompositesStudy of the Decrease in Adhesion Force between Chloride-Isobutene Rubber and Stainless-Steel by Plasma Treated on the Rubber SurfaceShape Memory Characteristics of Ti50Ni50-xCux(x=35, 40) Alloy StripsSurface Modification of Ti Dental Implants by Grit-Blasting and Micro-Arc OxidationPhotocatalytic Degradation of Methylene Blue Using Porphyrin/TiO2 Complexes Activated by Visible LightElectromagnetic Shielding of Multi-Walled Carbon Nanotube/Epoxy NanocompositesA NOx Sensor Based on Solid-Electrolyte Impedance TransducerMathematical Modeling of Thin Multiphysical StructuresMechanical and Morphological Properties of Sisal/Glass Fiber-Polypropylene CompositesChicken Eggshell as a Filler for Polymer Composites: Preparation and CharacterizationsOptimization of Crack-Free Polytypoidally Joined Si3N4?Al2O3 Functionally Graded Materials (FGM) Using 3-Dimensional ModelingStructural Transition of Stabilized Martensite in CuZnAl AlloyA Comparative Study of the Hydrostatic Performances of 1-3 Piezoelectric Composites with a Porous MatrixFriction Characteristic of Sliding Direction and Angle of Micro-Grooved Crosshatch Patterns under Lubricated ContactVascularized Multi-Functional Materials and StructuresTEM Studies on the Microstructure in Ferromagnetic Shape Memory AlloysExperimental Observation on Domain Front Morphology in NiTi Microtube during Tensile UnloadingFabrication and Simulation of a Ni?Al2O3 Crack-Free Joining for Multiple Metal-Ceramic Composites Using a New Functionally Graded Material (FGM) MethodThe Application of Thermosensitive Magnetic Nanoparticles in Drug DeliveryLight-Induced Functional VO2 FilmsEffects of EPON on Mechanical and Thermal Properties of Epoxy ResinsMicrostructure and Tribological Performance of a-CNx /TiNx Composite Films Prepared by Pulsed Laser DepositionThe Preparation and Application of Shell Powder in UHMWPE-Fiber Unidirectional Plate Effects of Temperature on Microstructure and Tribological Performance of a-CNx Films Prepared by Pulsed Laser DepositionStructure and Mechanical Properties of Ceramic Coatings Fabricated by Micro-Arc OxidationFabrication of Poly(diphenylsilylenemethylene) Matrix Nanocomposite Thin Films by Laser AblationSynthesis and Properties of Barium Strontium Titanate Thin Films on Copper FoilsCarbon Foam with High Strength and High Thermal Conductivity Doped by Nano-TitaniumStructure, Magnetic and Transport Properties of MnxGe1-xAsymptotic Derivation of a Curved Piezoelectric Interface Model and Homogenization of Piezoelectric CompositesMicrostructures and Magnetic Properties of Nanocomposite FePt Multilayer FilmsMicrostructures and Magnetic Properties of Sputtered Expitaxial Co3Pt/Pt Multilayer FilmsEffect of N2 Partial Pressure on the Microstructure and Texture of MgO Films Deposited by Rf-Magnetron SputteringTensile and Fatigue Testings of Hybrid Al/APC-2 Nanocomposite Laminates at Elevated Temperature Effect of Tin Content on the Microstructure and Property of Brazed WC-Co/CrMo Alloy Steel JointsStructural and Magnetic Properties of Cobalt and Aluminum Co-Doped ZnO PowdersResorbable Metallic Implant: Findings from an Animal ModelDynamic Response of Functionally Graded Circular Cylindrical ShellsImpact Behavior of Cracked Plate Repaired with Composite and FML PatchesPreparation and Tribological Properties of Amorphous Ti/C Multilayers by Pulsed Laser DepositionNickel Foam-Supported NiO/Ag Porous Spheres Prepared by Electrodeposition as Anode for Lithium-Ion BatteriesElectrochromic and Electrochemical Properties of Nickel Oxide Thin Films Prepared by a Modified Sol-Gel MethodImplementation of Magnetostrictive Material Terfenol-D in CNG Fuel Injection ActuationEnhancement of Gas Response of ZnO Micro-Nano Structured Layers through Plasma TreatmentNovel Surfactant Free and Solid State Polymerization to Dendritic Polyaniline NanofibersSynthesis and Characterization of Luminescent Rod-Coil Poly[2,7-(9,9- Dihexylfluorene)] - Block-Poly(2-(Dimethylamino) Ethyl Methacrylate) by Atom Transfer Radical PolymerizationPreparation of Nanoporous Mondispersed Silica Nanoparticles Films Using Poly(styrene)- Block-Poly( 2-Vinyl Pyridine) as TemplateMicrostructure and Properties of Polyimide /Monodispersed Colloidal Silica Hybrid Films Prepared by Sol?Gel ProcessPreparation and Patterning of Optical Hybrid Thin Films Based on Photosensitive Polyimide and Monodispersed Colloidal SilicaSynthesis of Green-Emitting Phosphors by Bicontinuous Cubic Phase ProcessSynthesis and Characterization of Photopolymerized Poly(acrylic)/Monodispersed Colloidal Silica Hybrid Thin FilmsImaging Laminar Damage in Plates Using Lamb Wave Beamforming Effect of Nitrocarburized Layer on the Resistivity Properties of Stainless SteelsPolycarbonate with Pineapple Leaf Fiber to Produce Functional CompositesEffect of Pretreatment on Properties of Coir-Based Green CompositeEffect of Brazing Temperature on the Microstructure and Property of Vacuum Brazed WC-Co and Carbon Steel JointEffects of Nitriding Processes on the Mechanical Properties of SACM 645 SteelInfluence of Radialization Dosage on Shape Memory Effect of Polystyrene CopolymerTensile Deformation Behaviours of Nylon 6 Based NanocompositesX-Ray Micro-Tomography as a Tool for Quantitative Characterization of Advanced Materials Manufacturing Processes Wear Behaviors of Nano Grained Aluminum AlloysMagnetic and Relaxation Properties of (CO45Fe45Zr10)x(Al2O3)1-x Thin FilmsThe Technique for Fabricating Submicron Moir? Grating Using FIB Milling Investigate of Electrical Conductivity of Shape-Memory Polymer Filled with Carbon BlackComplex Multifunctional Materials for Special ApplicationsThe Preparation and Study on UHMWPE/Epoxy Gel-Spun FibresDevelopment of a High Performance Peristaltic MicropumpCouple Stress Model of Steric Stiffening in Nanoporous SolidsSynthesis and Modification of Epoxidized Natural Rubber from Natural Rubber LatexSmall Punch Test of Advanced In Situ Synthesized Ti Metal Matrix CompositesSynthesis of Locally-Ordered Carbon Nanotube Arrays from Patterned Catalyst by Self-Assembly TechniqueHigh-Quality Single-Walled Carbon Nanotubes Synthesized by Floating Catalyst Chemical Vapor DepostionDevelopment of Noble Metal Oxide Electrode for Low Oxygen EvolutionA Kinetic Study on the Electrodeposition of Ni-Cr Alloy on Copper for Embedded Resister Layer in PCB Characteristics of Silver Electrodeposition Solution and Silver Film Fabricated by Electrodeposition with Additives for InterconnectionPolymer Brush-Stabilized Polyplex for a siRNA Carrier with Long Blood Circulatory Half-Life Preparation and Characterization of Polyurethane/Multi-Walled Carbon Nanotubes Composites with Multi Functional PerformanceDevelopment of an Ultra-Small Smart Temperature Sensor with Quartz Tuning Fork ResonatorsPrediction of Inelastic Behavior of Composite Laminates Using Multi-Surface Continuum Damage-PlasticityReal 3D Crack-Front and Crack Trajectory Analyses of Single-Side Repaired Thick Aluminium PanelsExchange Effect in TM-TbCo/RE-TbCo Double Layer FilmsMagnetic Properties of TbCo/(SiNx/Co)n FilmsSingularity-Reduced Integral Representations for Discontinuity in Smart MaterialsSelf-Protection Multi-Ring-Architecture Fiber Sensing SystemThe Fabrication of Nanoporous Hydroxyapatite CeramicsEffect of Copper Oxide on the Sintering of Alumina CeramicsThe In Vivo Study of Biomimetic Chitosan Substrates? Osteoinduction EffectsThe Strength Deterioration of Aramid Fiber in High TemperatureEffects of Bi Doping on the In15Sb85 Phase Change Recording Thin FilmCarbon Nanotube Composites for Vibration DampingSynthetic Biomimetic Carbonate-Hydroxyapatite Nanocrystals for Enamel RemineralizationInfluence of Ru(II) Bipyridyl Complex on the Photocatalytic H2 Evolution over TiO2 Nanoparticles with MesostructuresStudy on the Deformation of TiNi/AlSi Composite Alloy Using DSCM MethodCrystallization Behavior of Polypropylene (PP)/ Polyethylene Terephthalate (PET) Composite FibresThe Phenotypes of Osteoblastic Cells on Surfaces with Different Mechanical PropertiesDynamic Reinforced of Casting Alloys after Superdeep PenetrationFabrication of Poly(L-Latic Acid) Scaffolds with Wool Keratin for Osteoblast CultivationAntibacterial and Nontoxic Nano Silver PLLA Composites for Tissue EngineeringMicrostructural Evolution during Warm Compression of Medium Carbon Steel QuenchedMass-Production of Practical Mussel Adhesive Protein in Escherichia ColiSmart Hybrid Mussel Adhesive Materials for Cell and Tissue EngineeringCharacterization of a Functionally Graded Hypereutectic Al-Si Alloy Produced by Centrifugal MethodTowards a Generalized Macro-Level Damage Model for Unidirectional CompositesProcess Development of Low-Cost AgNi and AgFe Contact Materials with no Range of Solid SolubilityModeling of the Cyclic Behavior of Shape Memory Alloys during Localized Unstable Mechanical ResponseNonlinear Model on Torsional Behaviors of CFRP Strengthened Reinforced Concrete BeamsPseudoelastic Behavior of Cu?Al?Be Shape Memory Wires Subjected to Varied Loading and Unloading CyclesSynthesis and Characteristic of Molecularly Imprinted Polymer Immobilized Mesoporous Silica Sphere for Selective Binding of S-NaproxenHigh-Temperature Thermal Cyclic Oxidation Behavior of Wide-Gap Brazed IN738 SuperalloyPreparation of CuMgAl Hydrotalcite-Like Compounds at Low MII/MIII Molar RatiosShape-Controlled Synthesis and Characterization of CuS Crystal from a Low Temperature Hydrothermal RoutePrecise Quantitative Evaluation of Nano-Ordered Intermetallic Compounds in Sn-3.0Ag-0.5Cu Lead-Free Solder Bump by Using TEMInfluence of Carbon Sources and Catalytic Precursors on the Products Prepared by Catalytic CombustionEffect of Particle Size of Fully Porous-Coated (FPC) Implants on OsseointegrationEffects of Silver Nanostructures on Fluorescence Modulation of Rhodamine B and FluoresceinAbout the Elaboration and Characterization of Fe-Based Composite with Friction DestinationSynthesis of Strontium-Doped Hydroxyapatite Powder via Sol-Gel MethodEffect of Slurry Preparation on Physical Properties of Porous Hydroxyapatite Prepared via Polymeric Sponge MethodPorous Barium Strontium Titanate-Titania Nanocomposites for Photocatalytic ApplicationsDevelopment of Novel Environment-Friendly Magnesium AlloysImprovement of Microstructural Controllability of Cellular Ceramic for Multifunctional CompositesWetting and Adhesion Behavior of Undulated a-C:H Film Deposited on Nano-Scale Copper Dot Study of Nanometer Al2O3 Composite Electroless Deposit Strengthened by Different Laser PowerA Novel Method to Synthesize Nanocrystalline Calcium PhosphatesPorous Ceramics for High Temperature FiltersContinuum Modeling on Macroscopic Domain Patterns during Stress Induced Phase Transition in NiTi Tubes Preventing Metal Structure from Water-Seepage by Organic Sealants Comparing ResearchStudy on the Dielectric Properties of Hybrid and Porous Polyimide-Silica FilmsPreparation and Characterization of Functional GeopolymerPreparation of CF/BR Composite Used for Electromagnetic ShieldingSynthesis of Si3N4/Polyimide Hybrid FilmsPreparation of Low-K Fluorinated Polyimide/Phlogopite NanocompositesPlatinum-Ruthenium-Multiwalled Carbon Nanotube-Nafion Nanocomposite for Methanol ElectrooxidationMicrostructures and Oxygen Reduction of Recycled TiH2 Powders during SinteringComparison of Bone Formation in Rabbits Using Hydroxyapatite and ?-Tricalcium Phosphate Scaffolds Fabricated From Egg ShellsPlasma Non-Transferred Arc Cladding of Alumina Powder on Mild Steel-Parameters Optimization Using Taguchi MethodStatistical Analysis on Bonding Strength and Failure Mechanism of Plasma-Sprayed HA Coating with Reinforced Intermediate LayersLayer-by-Layer Finite Element Analysis of Smart Composite PlatesCuprous Oxide Films Prepared by Using a Microwave Atmospheric Pressure Plasma TorchComposites of Pet and PBT/PP with BentoniteAnalytical Solutions for Crack-Tip Higher Order Stress Fields in Thermal Barrier CoatingThe Discontinuous Higher Order Fields for Anti-Plane Crack at InterfaceEffect of Electrospun Fibers on the Interlaminar Properties of Woven CompositesFunctionally Graded Dental Implant and its Effect on Bone RemodelingA Study on Improvement Capture Velocity for Increasing Inhalation Efficiency of Hood in Local Ventilation SystemStudy on Three-Dimensional Thermal Deformation of Aluminum Casting Tire Mold by Numerical Analysis and Experiment Anisotropy Control of Cold Rolled Cu-Ag AlloysAgeing Behavior of Cu-Ag AlloysMicrocosmic Growth Process of ZnO MicrorodsComposite Ceramics Reinforced with Zirconia NanopowdersBioglasses in the SiO2-CaO-P2O5 SystemHeat and Fluid Flow Characters of Single-Screw for Extrusion Molding by Finite Element AnalysisA Study on Corrosion Defect Evaluation of Painted Metal by Using Nondestructive TestsUltra-Small Superparamagnetic Iron Oxide Nanoparticles as MRI Contrast Enhancing AgentsNovel Synthesis of Ultra-Small Silver Nanoparticles with High Antimicrobial Activity Influence of Annealing on the Magnetic Properties of Fe50Co50 FilmsA New Method for Temperature Measurement by the Nanometer ParticlesCharacterization of Iron Doped Titanium Nitride Thin Films Prepared by Magnetron SputteringToxicology Studies of a Superparamagnetic Iron Oxide Nanoparticle In VivoPreparation of Aspect Ratio-Controlled Carbon NanotubesFabrication of Organic Silk Fibroin/Multiwalled Carbon Nanotube Composite Cryogels by Freeze-Drying MethodMultiwalled Carbon Nanotubes-Incorporated Polyurethane NanocompositesNanosize Copper Dispersed Ionic Liquids as an Electrolyte of New Dye-Sensitized Solar CellsSensing of Ethanol with Nanosize FeZnO Thin FilmsApplications of Cu@C Nanoparticles in New Dye-Sensitized Solar CellsChemical Structure of Nanosize Copper Wires in MCM-41Analysis of Infrared Thermography during Tensile Test of GFRPThermal Viscoelastic Analysis of 3D Fabric NanocompositesPeriodic and Chaotic Motions of a Simply Supported FGM Plate with Two Degrees-of-FreedomBlending of Natural Fibres and Thermoplastics by Screwless ExtrusionThe Influence of Surface Modification of Multi-Walled Carbon Nanotubes on the Electrical Property of its Polyethylene CompositesPreparation, Adhesive Performance and Stability of Natural Rubber Latex Grafted with N-Butyl Acrylate (BA) and Methyl Methacrylate (MMA)Investigating Nanoparticle Effect on the Mode I Fracture Toughness of Glass/Epoxy CompositesDiagnostic Imaging for Structural DamageThe Effect of Octa(Maleimidophenyl)Silsesquioxane on Thermal and Dielectric Properties of Bismaleimide-Triazine ResinsPolycarbonate-Carbon Nanofibers Composites: An Electron Spin Resonance StudyStretching-Induced Orientation for Improving the Mechanical Properties of Electrospun Polyacrylonitrile Nanofiber SheetElectric Field Distribution in Macro Fiber Composite Using Interdigitated ElectrodesTwo-Dimensional Fractal Structures of Metal Oxides Synthesized at Room TemperatureSynthesis and Characterization of Europium Ternary Luminescence Coordination Compound NanorodsFourier Transform Infrared Study on Sol-Gel Derived Manganese-Doped HydroxyapatiteFracture Behavior of Natural Fiber Reinforced Biopolymer Matrix CompositePhoto- and Thermo-Chromic Study of the Ethylenediamine TrimolybdateTitanium Alloy Ti6Al4V?s Corrosion Resistance Behavior by Double Glow Discharge Plasma Hydrogen-Free Carburizing ProcessStudy on Osteoinductivity of Injectable Calcium Phosphate Cement ScaffoldStudy on the Low-Velocity Impact Behavior of CFRP with Nanoclay-Filled Epoxy MatrixFabrication of Highly Ordered Titania Nanotubes in Viscous Organic ElectrolytesTensile Properties of Different Silkworm Silk FibersPreliminary Study on a High Strength Nanoclay/Epoxy Coating for Ocean Engineering ApplicationsManufacture of a Homogenous Nano-Diamond/Poly (Lactic Acid) Bio-Engineered CompositeProduction of a Green Composite: Mixture of Poly (Latic Acid) and Keratin Fibers from Chicken FeathersNoise Reduction by Using Composite PlatePlastic Optical Fiber Sensors for Measurement of Large Strain in Geotextile MaterialsHigh-Energy Influences of Substance?s Flows on Structural Changes in MaterialsGlass Substrate with UV Imprinted Polymer Moth Eye StructureStudy on Non-Halogen Flame-Retarded HIPS with High Strength HIPSOptimal Design of Nanostructures Used in Vibration Control Homogenization, Numerical Analysis & Optimal Design of MR FluidsVariational Approach in Optimal Design of Piezoelectric Sensors & ActuatorsApplication of Three-Dimensional Displacement and Strain Distribution Measurement by Windowed Phase-Shifting Digital Holographic InterferometryDevelopment of Model of the Superdeep Penetration of Microparticles Possible Reasons of Degradation of Elements of Space Vehicle Control-SystemsDetermination of Damages in Superdeep Penetration and Alteration of Properties of Materials under the Extreme ConditionsCharacterisation and Novel Applications of Fibrillar Polymer Composites Behavior of CFRP Wrapped Concrete Columns with Partial Deteriorated StrengthNano-Cellulose as Promising BiocarrierSurface Characteristics of Magnesium Alloys Treated by Anodic Oxidation Using Pulse PowerBone-Implant Contact of Surface-Modified Titanium ImplantsIrradiation of Synthesized Magnetic Nanoparticles and its Application for HyperthermiaSurface Morphological Changes Accompanying Dissolution of Bioactive Glass: Effect of Residual StressEffect of pH Value on Synthesis of Calcium PhosphatesSurfaces Modified by Amphiphilic Copolymer: Preparation and ApplicationNear-IR Sensitive Au-Au2S Nanoparticles with Biocompatibility for Drug DeliveryNovel Organic-Inorganic Hybrid Nanoparticles as Non-Viral Gene VectorBioassay Based on Photonic CrystalDistinctive Degradation Behaviors of Electrospun PGA, PLGA and P(LLA-CL) Nanofibers Cultured with/without Cell CultureA Retrievable Polymer Urethral Stent for Treatment of Urethral StricturesActivation of MAPK and NF-?B Induced by Biomaterials in Vascular Endothelial CellsAn Evaluation of CaF2 Doping Tricalcium Silicate as Dental Restorative MaterialsConstruction of Nonbiofouling Biofunctional Glass Surface by Self-Assembled Monolayer and Graft Hydrophilic PolymerPoly(L-Lactide)/Multiwalled Carbon Nanotube Composites: Interaction with Osteoblast-Like Cells In Vitro
In Vitro Bioactivity of Potassium Titanate WhiskersKinetic Effect of Cationic Comb-Type Copolymers on DNA HybridizationBio-Fabrication of Patterned Cellulose Nano-FibersElectrospinning Nanocomposite Nanofibers of Hydroxyapatite/Chitosan Plasma Polymerized Thin-Films for BiosensorsThe Design of Novel Scaffolds by Integrating Microbial Cellulose onto Plasma Treated PolypropyleneStudy on Blood Compatibility of SIS Modified by Plasma Surface Grafting An Experimental and Computational Study on Zn-Substituted HydroxyapatiteBiocompatibility and Osteogenesis of Calcium Phosphate Cement Scaffolds for Bone Tissue EngineeringElectrochemical Deposition of Fluoridated Calcium Phosphate Thin Film on Titanium SubstratesDeformation and Fracture of Bone Analogue Biomaterials Having Different Polymer MatricesTotally Biodegradable and Osteoconductive Composite Material Consisting of Polyhydroxybutyrate and Tricalcium Phosphate for Bone Tissue Repair
In Vitro Degradation and Protein Adsorption Characteristics of PHBV/PLLA Blends and PHBV/PLLA-Based Tissue Engineering ScaffoldsCharacteristics and Chemical Stability of the Bioactive Titania Layer Formed on Ti, Ti-6Al-4V and NiTi SMA through a Low Temperature Oxidation ProcessInvestigation of Platelet Adhesion Behavior on Si-N-O Films Synthesized by Unbalanced Magnetron SputteringAdsoption CD34 Antibody onto the Col/Hep Coating Film on Titanium to Improve Cytocompatibility of TitaniumDeposition of Diamond-Like Carbon Films on Polyoxymethylene Substrates by Magnetic Filtered Cathodic Vacuum Arc DepositionStudy the Restenosis after Percutaneous Transluminal Coronary Angioplasty(PTCA) in the Organ Culture SystemMCP-1 Expression Associated with Inflammation and BiomaterialsThe Biomedical Material of Functional ePTFE Hydrogels by the Cold Plasma Method and Radiation TechniqueInfluence of Hydrogen-Plasma Treatment on Blood Compatibility of Titanium Oxide FilmsNovel Silicon Based Anodic Spark Deposition Treatment for Dental Implant
In Vitro Biocompatibility Study of Nano TiO2 MaterialsInsertion Behavior of Microneedles for Drug DeliveryMicrostructure Control and Pseudoelasticity of Ti-Nb-Ge AlloyEffect of Oxygen Content on Microstructure and Mechanical Properties of Ti-Nb-Ge Alloys for Biomedical ApplicationAn Investigation into Dual-Source and Dual-Power Electrospinning of Nanofibrous Membranes for Medical ApplicationsPreparation of Lactic Acid Based Polyurethanes Modified by Castor OilPreparation and Characterization of Golden-Colored Pigments Based on Silver Coated with Metal OxidesEffects of Lead and Boride Inhibitors on the Passivity of Nickel Alloy 600 SurfaceA Study on the Tribological Behavior of Valve Train System by Low Friction CoatingFabrication of Chemiluminescence Sensor Based on the Funcinalized MWCNT-Nafion Composite FilmRadiolytic Deposition of Pt-Ru Catalysts on the Conductive Polymer Coated MWNT and their Catalytic Efficiency for CO and MeOHSynthesis and Characterization of (C, N)-Alloyed Stainless Steel Coatings by High Energy Ion Assisted Magnetron Sputtering DepositionMechanical Mechanisms of Chemical Mechanical PolishingTribological Properties of a Partially Transformed Carbon Layer from SiCEffects of Surfactant Concentration on Step Height Reduction of SiO2 in Chemical Mechanical Polishing with Ceria SlurryThe Characteristics and Thermal Stability of CrN/AlSiN Multilayer CoatingsEffect of Foreign Metal Doping on the Gas Sensing Behaviors of SnO2-Based Gas Sensor Deposition of Pd onto SnO2 Nanoparticles-Based Gas Sensors Using a Pd Complex as the PrecursorH2 Sensing Performance of TiO2-Based Diode-Type SensorsCharacterization of Intercalation Type Organic/MoO3 Nanohybrids and their VOC Sensing PropertiesEffect of Supported Transition Metal on CO Sensing Performance Using SnO2 in Reducing AtmosphereResistive Type Sensor Using Ceria Thick Film with Nano ParticlesFabrication of Nano Particles on Vertically Aligned Multi-Wall Carbon Nanotubes by E-Beam Evaporation