Multi-functional Materials and Structures

<ul><li>Preface</li><li>Thermal Stress Simulations of SOFC Membrane-Electrode Assembly</li><li>Functionally Gradient 3YSZ-IN713LC Composites</li><li>Time-Frequency Signal Analysis for Nondestructive Evaluation of Pile with Cap</li><li>Parametric Study of Machining Effect on Residual Stress and Surface Roughness of Nickel Base Super Alloy UDIMET 720</li><li>Nonlinear Acoustic NDE - Qualitative and Quantitative Effects</li><li>Thermal and Tensile Properties of PP Nanocomposite Blends</li><li>Formation of Chemical Elements under Superdeep Penetration of Lead Microparticles in Ferrous Target</li><li>Shape Memory Alloy Combined with Piezoelectric Materials Applied for Structure Vibration Control</li><li>Sensitivity in Large Deflection of Bossed and Pre-Tensioned Layered Plate under Lateral Load</li><li>Using FEM Analysis for Evaluating Lifetime of the Turbine Blades Repaired by Different Kinds of Titanium and Nickel Alloys</li><li>Influence of Secondary Oxide Phases on Microstructural and Gas Sensitive Properties of Nanostructured Titanium Dioxide Thin Films</li><li>Design of Finish System Using Rotational Magnetic-Assistance in Ultrasonic Electrochemical Finishing of Freeform-Surfaces</li><li>Development of a Safety Network System for Highway Structures in Korea </li><li>A Study on the Problems with Long-Term Bridge Monitoring Systems, and Suggested Solutions</li><li>Sound Transmission through Lightweight All-Metallic Sandwich Panels with Corrugated Cores </li><li>Development of Miniaturized Piezoelectric Multimode Transducer for Projection Purpose</li><li>Macroscopic Differential Model for Hysteresis and Butterfly-Shaped Behavior in Ferroelectric Materials</li><li>Feedback Linearization of Hysteretic Thermoelastic Dynamics of Shape Memory Alloy Actuators with Phase Transformations</li><li>Characteristics of BNT Films Synthesized by a Hydrothermal Method</li><li>Electromagnetic Wave Shielding and Fire Retardant Multifunctional Polymer Composites</li><li>Multifunctional Polymer Composites for "Intellectual" Structures: Present State, Problems, Future</li><li>Monitoring Vibrating Structures Using PZT Impedance Transducers</li><li>Development of High Performance Fiber Reinforced Composite with Negative Thermal Expansion Property</li><li>Prevulcanized Natural Rubber Latex/Modified Lignin Dispersion for Water Vapour Barrier Coatings on Paperboard Packaging</li><li>Seamless Morphing Wing with SMP Skin</li><li>Kinetics of Martensitic Phase Decomposition in the Cu-10wt.%Al Alloy with Ag Additions </li><li>Flame Stabilization and Emissions of a Natural Gas/Air Ceramic Porous Burner</li><li>Preparation of NbB₂-Al₂O₃<i>In Situ</i> Composites by SHS Involving Thermite Reactions</li><li>Effects of Particle Size and Size Distribution on the Mechanical Properties of EPDM/Silica Vulcanizates</li><li>A Novel Dynamic Absorber Using Enhanced Magnetorheological Elastomers for Powertrain Vibration Control</li><li>Mechanical Behavior of Non Sintered and Sintered Steel Wool</li><li>Experiments and Numerical Simulations of Interlocked Materials</li><li>Temperature Effects on Guided Wave Structural Damage Detection</li><li>Improvement of Fatigue Strength and Impact Properties of Plain-Woven CFRP Modified with Micro Fibrillated Cellulose</li><li>Active Vibration Control of Smart Hull Structure Using Piezoelectric Composite Actuators </li><li>Design and Control of Magnetorheological Fluid-Based Multifunctional Haptic Device for Vehicle Applications</li><li>Damping Force Control of MR Damper for a Passenger Vehicle Considering Hysteretic Compensator</li><li>Natural Fiber Reinforced Plastic Foams from Plant Oil-Based Resins</li><li>A Planar Dielectrophoretic Microdevice for Particle Manipulation</li><li>Development of a Variable Stiffness and Damping Isolator Using Magnetorheological Fluid Technology</li><li>Potentials of Plastic Optical Fibers for Sensor Technology</li><li>Multifunctional Materials via Molecular Self-Organization into Liquid-Crystalline Phase</li><li>The Influence of the Marine Bacterium <i>Vibrio Natriegens</i> Growth on Metallic Corrosion as Studied by Microscope Technologies</li><li>Super-Hydrophobic Surfaces Improve Corrosion Resistance of Fe₃Al-Type Intermetallic in Seawater</li><li>Investigation on Fe₃Al Corrosion Behavior in Simulating Marine Biofilm Environment</li><li>Cellular Morphology, Peel Strength and Thermal Conductivity for Wood/NR and Expanded EPDM Laminates for Roofing Applications</li><li>The Influence of Aging Treatments on the Notched Tensile Strength of Ti-6Al-6V-2Sn Laser Welds</li><li>A Smart Flow Sensor for Flow Direction Measurement</li><li>Date Palm Tree Fiber as Polymeric Matrix Reinforcement, DPF-Polypropylene Composite Characterization</li><li>Synthesis of Bi_0.5(Na_0.7K_0.2Li_0.1)_0.5TiO₃ Powders through Molten Salt Method</li><li>Facile Synthesis of Conducting Polypyrrole/Non-Aggregated Magnetite Nanocomposites and their Magnetorheological Characteristics </li><li>Quantum Chemical and Electrochemical Studies on the Inhibitive Effect of Carboxymenthylchitosan for Mild Steel in Different PHs</li><li>Multifunctional Performance of Europium-Doped Feldspar Ceramics</li><li>The Effect of Calcium Sulfate with Alloplast on the Periodontal Regeneration in One-Wall Intrabony Defect of Beagle Dogs</li><li>A Study on Ultrasonic Vibration Assisted Tapping of Titanium</li><li>Vibration Damping of Automotive Driveshafts with Piezofiber Composite Structures</li><li>Positive Temperature Coefficient Behavior of the Graphite Nanofibre and Carbon Black Filled High-Density Polyethylene Hybrid Composites </li><li>Swelling Behavior of Poly(Acrylamide) Nanoclay Composite Hydrogels</li><li>Miscibility Behaviour of Polyethylene Oxide/Hydroxypropyl Methyl Cellulose Blends</li><li>Synthesis, Characterization of Phenethyltrimethoxysilane (PE) Modified Organic-Inorganic Hybrid Silicalite-1 Molecular Sieves and its Transformation into Solid Acid Materials</li><li>Magnetorheological Fluids Behaviour in Tension Loading Mode</li><li>Stick-Slip Compensation of Micro-Positioning Using Elastic-Plastic Static Friction Model</li><li>Crack Growth Characteristics Evaluation Method in Ceramics Based on DT Technique</li><li>Strain Transfer Models for Strain Actuators</li><li>Solution-Responsive Shape-Memory Polymer Driven by Forming Hydrogen Bonding</li><li>Novel Magnetostrictive Bimetal Actuator Using Permendur</li><li>Micro-Forming of Au₄₉Ag_5.5Pd_2.3Cu_26.9Si_16.3 Metallic Glasses in Supercooled Region</li><li>Fabrication and Characterization of Microscale Sensors for Strain Measurement in Flexible Polymer Heart Valve Leaflet</li><li>Microstructure and Mechanical Properties of 0.63C-12.7Cr Martensitic Stainless Steel during Various Tempering Treatments</li><li>Fracture Behavior of Polypropylene /Elastomer Blends</li><li>Self-Healing of Cracks in Epoxy Composites</li><li>Melamine Resin-Walled Microcapsules Containing Styrene: Preparation and Characterization</li><li>Synthesis and Characterization of a Novel Epoxy with Improved Processability</li><li>Preparation and Characterization of a Novel Flame Retardant</li><li>Analysis of the Novel Strain Responsive Actuators of Silicone Dielectric Elastomer</li><li>Mechanical Properties of Polybenzimidazole Reinforced by Carbon Nanofibers</li><li>Health Monitoring of Laminate Plates with AE Signals and Wave Propagation </li><li>Fabrication of Titania Film on NiTi Alloy by a Deposition-Assisted Advanced Oxidation Method</li><li>Effects of Electro-Fenton Process on Blood Compatibility and Nickel Suppression of NiTi Shape Memory Alloy</li><li>Preparation and Properties of Nano-Silica Filled Self-Reinforced Polypropylene</li><li>Development of the Green Composite Consists of Woodchips, Bamboo Fibers and Biodegradable</li><li>Transport and Magnetic Properties of CrO₂-Polymer Magnetic Composites</li><li>Oxide Films Produced on Fe₁₉Cr₅Al Steel Coated with Al, Pt and Al+Pt Composite Nanofilms: Technological Aspects and Catalytic Properties</li><li>Catalytic Destruction and Removal of Toluene by Microwave/Fe₃O₄ System</li><li>Using Catalyst and Electrolysis Diaphragm Method to Produce Multiple Oxidants to Remove the Scaling and Slime in Cooling System</li><li>Bio-Chemical Sensor Based on Smart Material</li><li>Study on Semi-Solid Magnesium Alloy Fabricated by Ultrasonic Stirring Method </li><li>Optimization of Preparation of the TiO₂ Photocatalytic Reactor Using the Taguchi Method</li><li>Synthesis and Characterization of Bamboo-Like Carbon Nanotubes</li><li>Preparation of Silica Nano-Rods by CVD</li><li>Synthesis of Mono-Sized Silica Nanoparticles by Combustion Technique</li><li>Synthesis of Straight Y-Shaped Silica Nanorods</li><li>Optimization of Dimensions of a Sandwich Structure Using Genetic Algorithm (GA)</li><li>Effect of Substrate Temperature and Incident Energy for Alloyzation of Co onto Cu(001) Substrate</li><li>Three-Dimensional Charge Redistribution of Ionic Polymer-Metal Composites with Uncertainty in Surface Conductivity</li><li>InGaP/GaAs pnp Heterojunction Bipolar Transistor with ?-Doped Sheet between Base-Emitter Junction</li><li>Thermal Post-Buckling Analysis of Functionally Graded Panels in Hypersonic Airflows </li><li>Distributed Pressure Sensing as Smart Mat Applications with Hetero-Core Fiber Optic Nerve Sensors </li><li>Superdeep Penetration as the New Physical Tool for Creation of Composite Materials</li><li>Effect of Flame Retardant on Mechanical Properties and Flammability of Sisal/PP Composites</li><li>Fiber Bragg Gratings Array for Structural Health Monitoring</li><li>Precision Transfer and Replication of Ultrasonic Nanoimprint</li><li>Thermal Degradation of Novel Exfoliated PLLA/LDH Nanocomposites</li><li>Application of Schottky Bulk-Layer Design on Double-Heterojunction Pseudomorphic AlGaAs/InGaAs/AlGaAs High Electron Mobility Transistors (DH-HEMTs)</li><li>Superdeep Penetration of the Microparticles Accelerated by Explosion in Metals and Alloys of Iron</li><li>Natural Rubber and EPDM Rubber as an Impact Modifier in Vetiver Grass-Polypropylene Composites</li><li>An Impact Events Monitoring System for Wind Turbine Blades</li><li>Bionanocomposites of Grass</li><li>Analysis for Replication and Surface Roughness of Micro-Feature of Silicon Mold Insert by UV-LIGA Method</li><li>Effect of FGM on Film Quality of Al onto Cu(001) Substrate by Considering Incident Energy and Deposition Rate</li><li>Influence of Low-Level Oxidation on Mechanical Property of Two-Dimension Carbon/Carbon Composites</li><li>Study of the Decrease in Adhesion Force between Chloride-Isobutene Rubber and Stainless-Steel by Plasma Treated on the Rubber Surface</li><li>Shape Memory Characteristics of Ti₅₀Ni_50-xCu_x(x=35, 40) Alloy Strips</li><li>Surface Modification of Ti Dental Implants by Grit-Blasting and Micro-Arc Oxidation</li><li>Photocatalytic Degradation of Methylene Blue Using Porphyrin/TiO₂ Complexes Activated by Visible Light</li><li>Electromagnetic Shielding of Multi-Walled Carbon Nanotube/Epoxy Nanocomposites</li><li>A NOx Sensor Based on Solid-Electrolyte Impedance Transducer</li><li>Mathematical Modeling of Thin Multiphysical Structures</li><li>Mechanical and Morphological Properties of Sisal/Glass Fiber-Polypropylene Composites</li><li>Chicken Eggshell as a Filler for Polymer Composites: Preparation and Characterizations</li><li>Optimization of Crack-Free Polytypoidally Joined Si₃N₄-Al₂O₃ Functionally Graded Materials (FGM) Using 3-Dimensional Modeling</li><li>Structural Transition of Stabilized Martensite in CuZnAl Alloy</li><li>A Comparative Study of the Hydrostatic Performances of 1-3 Piezoelectric Composites with a Porous Matrix</li><li>Friction Characteristic of Sliding Direction and Angle of Micro-Grooved Crosshatch Patterns under Lubricated Contact</li><li>Vascularized Multi-Functional Materials and Structures</li><li>TEM Studies on the Microstructure in Ferromagnetic Shape Memory Alloys</li><li>Experimental Observation on Domain Front Morphology in NiTi Microtube during Tensile Unloading</li><li>Fabrication and Simulation of a Ni-Al₂O₃ Crack-Free Joining for Multiple Metal-Ceramic Composites Using a New Functionally Graded Material (FGM) Method</li><li>The Application of Thermosensitive Magnetic Nanoparticles in Drug Delivery</li><li>Light-Induced Functional VO₂ Films</li><li>Effects of EPON on Mechanical and Thermal Properties of Epoxy Resins</li><li>Microstructure and Tribological Performance of a-CN_x /TiN_x Composite Films Prepared by Pulsed Laser Deposition</li><li>The Preparation and Application of Shell Powder in UHMWPE-Fiber Unidirectional Plate </li><li>Effects of Temperature on Microstructure and Tribological Performance of a-CN_x Films Prepared by Pulsed Laser Deposition</li><li>Structure and Mechanical Properties of Ceramic Coatings Fabricated by Micro-Arc Oxidation</li><li>Fabrication of Poly(diphenylsilylenemethylene) Matrix Nanocomposite Thin Films by Laser Ablation</li><li>Synthesis and Properties of Barium Strontium Titanate Thin Films on Copper Foils</li><li>Carbon Foam with High Strength and High Thermal Conductivity Doped by Nano-Titanium</li><li>Structure, Magnetic and Transport Properties of Mn_xGe_1-x</li><li>Asymptotic Derivation of a Curved Piezoelectric Interface Model and Homogenization of Piezoelectric Composites</li><li>Microstructures and Magnetic Properties of Nanocomposite FePt Multilayer Films</li><li>Microstructures and Magnetic Properties of Sputtered Expitaxial Co₃Pt/Pt Multilayer Films</li><li>Effect of N₂ Partial Pressure on the Microstructure and Texture of MgO Films Deposited by Rf-Magnetron Sputtering</li><li>Tensile and Fatigue Testings of Hybrid Al/APC-2 Nanocomposite Laminates at Elevated Temperature </li><li>Effect of Tin Content on the Microstructure and Property of Brazed WC-Co/CrMo Alloy Steel Joints</li><li>Structural and Magnetic Properties of Cobalt and Aluminum Co-Doped ZnO Powders</li><li>Resorbable Metallic Implant: Findings from an Animal Model</li><li>Dynamic Response of Functionally Graded Circular Cylindrical Shells</li><li>Impact Behavior of Cracked Plate Repaired with Composite and FML Patches</li><li>Preparation and Tribological Properties of Amorphous Ti/C Multilayers by Pulsed Laser Deposition</li><li>Nickel Foam-Supported NiO/Ag Porous Spheres Prepared by Electrodeposition as Anode for Lithium-Ion Batteries</li><li>Electrochromic and Electrochemical Properties of Nickel Oxide Thin Films Prepared by a Modified Sol-Gel Method</li><li>Implementation of Magnetostrictive Material Terfenol-D in CNG Fuel Injection Actuation</li><li>Enhancement of Gas Response of ZnO Micro-Nano Structured Layers through Plasma Treatment</li><li>Novel Surfactant Free and Solid State Polymerization to Dendritic Polyaniline Nanofibers</li><li>Synthesis and Characterization of Luminescent Rod-Coil Poly[2,7-(9,9- Dihexylfluorene)] - Block-Poly(2-(Dimethylamino) Ethyl Methacrylate) by Atom Transfer Radical Polymerization</li><li>Preparation of Nanoporous Mondispersed Silica Nanoparticles Films Using Poly(styrene)- Block-Poly( 2-Vinyl Pyridine) as Template</li><li>Microstructure and Properties of Polyimide /Monodispersed Colloidal Silica Hybrid Films Prepared by Sol-Gel Process</li><li>Preparation and Patterning of Optical Hybrid Thin Films Based on Photosensitive Polyimide and Monodispersed Colloidal Silica</li><li>Synthesis of Green-Emitting Phosphors by Bicontinuous Cubic Phase Process</li><li>Synthesis and Characterization of Photopolymerized Poly(acrylic)/Monodispersed Colloidal Silica Hybrid Thin Films</li><li>Imaging Laminar Damage in Plates Using Lamb Wave Beamforming </li><li>Effect of Nitrocarburized Layer on the Resistivity Properties of Stainless Steels</li><li>Polycarbonate with Pineapple Leaf Fiber to Produce Functional Composites</li><li>Effect of Pretreatment on Properties of Coir-Based Green Composite</li><li>Effect of Brazing Temperature on the Microstructure and Property of Vacuum Brazed WC-Co and Carbon Steel Joint</li><li>Effects of Nitriding Processes on the Mechanical Properties of SACM 645 Steel</li><li>Influence of Radialization Dosage on Shape Memory Effect of Polystyrene Copolymer</li><li>Tensile Deformation Behaviours of Nylon 6 Based Nanocomposites</li><li>X-Ray Micro-Tomography as a Tool for Quantitative Characterization of Advanced Materials Manufacturing Processes </li><li>Wear Behaviors of Nano Grained Aluminum Alloys</li><li>Magnetic and Relaxation Properties of (CO₄₅Fe₄₅Zr₁₀)x(Al2O3)_1-x Thin Films</li><li>The Technique for Fabricating Submicron Moire Grating Using FIB Milling </li><li>Investigate of Electrical Conductivity of Shape-Memory Polymer Filled with Carbon Black</li><li>Complex Multifunctional Materials for Special Applications</li><li>The Preparation and Study on UHMWPE/Epoxy Gel-Spun Fibres</li><li>Development of a High Performance Peristaltic Micropump</li><li>Couple Stress Model of Steric Stiffening in Nanoporous Solids</li><li>Synthesis and Modification of Epoxidized Natural Rubber from Natural Rubber Latex</li><li>Small Punch Test of Advanced <i>In Situ </i>Synthesized Ti Metal Matrix Composites</li><li>Synthesis of Locally-Ordered Carbon Nanotube Arrays from Patterned Catalyst by Self-Assembly Technique</li><li>High-Quality Single-Walled Carbon Nanotubes Synthesized by Floating Catalyst Chemical Vapor Depostion</li><li>Development of Noble Metal Oxide Electrode for Low Oxygen Evolution</li><li>A Kinetic Study on the Electrodeposition of Ni-Cr Alloy on Copper for Embedded Resister Layer in PCB </li><li>Characteristics of Silver Electrodeposition Solution and Silver Film Fabricated by Electrodeposition with Additives for Interconnection</li><li>Polymer Brush-Stabilized Polyplex for a siRNA Carrier with Long Blood Circulatory Half-Life </li><li>Preparation and Characterization of Polyurethane/Multi-Walled Carbon Nanotubes Composites with Multi Functional Performance</li><li>Development of an Ultra-Small Smart Temperature Sensor with Quartz Tuning Fork Resonators</li><li>Prediction of Inelastic Behavior of Composite Laminates Using Multi-Surface Continuum Damage-Plasticity</li><li>Real 3D Crack-Front and Crack Trajectory Analyses of Single-Side Repaired Thick Aluminium Panels</li><li>Exchange Effect in TM-TbCo/RE-TbCo Double Layer Films</li><li>Magnetic Properties of TbCo/(SiN_x/Co)_n Films</li><li>Singularity-Reduced Integral Representations for Discontinuity in Smart Materials</li><li>Self-Protection Multi-Ring-Architecture Fiber Sensing System</li><li>The Fabrication of Nanoporous Hydroxyapatite Ceramics</li><li>Effect of Copper Oxide on the Sintering of Alumina Ceramics</li><li>The <i>In Vivo </i>Study of Biomimetic Chitosan Substrates' Osteoinduction Effects</li><li>The Strength Deterioration of Aramid Fiber in High Temperature</li><li>Effects of Bi Doping on the In₁₅Sb₈₅ Phase Change Recording Thin Film</li><li>Carbon Nanotube Composites for Vibration Damping</li><li>Synthetic Biomimetic Carbonate-Hydroxyapatite Nanocrystals for Enamel Remineralization</li><li>Influence of Ru(II) Bipyridyl Complex on the Photocatalytic H₂ Evolution over TiO₂ Nanoparticles with Mesostructures</li><li>Study on the Deformation of TiNi/AlSi Composite Alloy Using DSCM Method</li><li>Crystallization Behavior of Polypropylene (PP)/ Polyethylene Terephthalate (PET) Composite Fibres</li><li>The Phenotypes of Osteoblastic Cells on Surfaces with Different Mechanical Properties</li><li>Dynamic Reinforced of Casting Alloys after Superdeep Penetration</li><li>Fabrication of Poly(L-Latic Acid) Scaffolds with Wool Keratin for Osteoblast Cultivation</li><li>Antibacterial and Nontoxic Nano Silver PLLA Composites for Tissue Engineering</li><li>Microstructural Evolution during Warm Compression of Medium Carbon Steel Quenched</li><li>Mass-Production of Practical Mussel Adhesive Protein in <i>Escherichia Coli</i></li><li>Smart Hybrid Mussel Adhesive Materials for Cell and Tissue Engineering</li><li>Characterization of a Functionally Graded Hypereutectic Al-Si Alloy Produced by Centrifugal Method</li><li>Towards a Generalized Macro-Level Damage Model for Unidirectional Composites</li><li>Process Development of Low-Cost AgNi and AgFe Contact Materials with no Range of Solid Solubility</li><li>Modeling of the Cyclic Behavior of Shape Memory Alloys during Localized Unstable Mechanical Response</li><li>Nonlinear Model on Torsional Behaviors of CFRP Strengthened Reinforced Concrete Beams</li><li>Pseudoelastic Behavior of Cu-Al-Be Shape Memory Wires Subjected to Varied Loading and Unloading Cycles</li><li>Synthesis and Characteristic of Molecularly Imprinted Polymer Immobilized Mesoporous Silica Sphere for Selective Binding of S-Naproxen</li><li>High-Temperature Thermal Cyclic Oxidation Behavior of Wide-Gap Brazed IN738 Superalloy</li><li>Preparation of CuMgAl Hydrotalcite-Like Compounds at Low M^II/M^III Molar Ratios</li><li>Shape-Controlled Synthesis and Characterization of CuS Crystal from a Low Temperature Hydrothermal Route</li><li>Precise Quantitative Evaluation of Nano-Ordered Intermetallic Compounds in Sn-3.0Ag-0.5Cu Lead-Free Solder Bump by Using TEM</li><li>Influence of Carbon Sources and Catalytic Precursors on the Products Prepared by Catalytic Combustion</li><li>Effect of Particle Size of Fully Porous-Coated (FPC) Implants on Osseointegration</li><li>Effects of Silver Nanostructures on Fluorescence Modulation of Rhodamine B and Fluorescein</li><li>About the Elaboration and Characterization of Fe-Based Composite with Friction Destination</li><li>Synthesis of Strontium-Doped Hydroxyapatite Powder via Sol-Gel Method</li><li>Effect of Slurry Preparation on Physical Properties of Porous Hydroxyapatite Prepared via Polymeric Sponge Method</li><li>Porous Barium Strontium Titanate-Titania Nanocomposites for Photocatalytic Applications</li><li>Development of Novel Environment-Friendly Magnesium Alloys</li><li>Improvement of Microstructural Controllability of Cellular Ceramic for Multifunctional Composites</li><li>Wetting and Adhesion Behavior of Undulated a-C:H Film Deposited on Nano-Scale Copper Dot </li><li>Study of Nanometer Al₂O₃ Composite Electroless Deposit Strengthened by Different Laser Power</li><li>A Novel Method to Synthesize Nanocrystalline Calcium Phosphates</li><li>Porous Ceramics for High Temperature Filters</li><li>Continuum Modeling on Macroscopic Domain Patterns during Stress Induced Phase Transition in NiTi Tubes </li><li>Preventing Metal Structure from Water-Seepage by Organic Sealants Comparing Research</li><li>Study on the Dielectric Properties of Hybrid and Porous Polyimide-Silica Films</li><li>Preparation and Characterization of Functional Geopolymer</li><li>Preparation of CF/BR Composite Used for Electromagnetic Shielding</li><li>Synthesis of Si₃N₄/Polyimide Hybrid Films</li><li>Preparation of Low-K Fluorinated Polyimide/Phlogopite Nanocomposites</li><li>Platinum-Ruthenium-Multiwalled Carbon Nanotube-Nafion Nanocomposite for Methanol Electrooxidation</li><li>Microstructures and Oxygen Reduction of Recycled TiH₂ Powders during Sintering</li><li>Comparison of Bone Formation in Rabbits Using Hydroxyapatite and ?-Tricalcium Phosphate Scaffolds Fabricated From Egg Shells</li><li>Plasma Non-Transferred Arc Cladding of Alumina Powder on Mild Steel-Parameters Optimization Using Taguchi Method</li><li>Statistical Analysis on Bonding Strength and Failure Mechanism of Plasma-Sprayed HA Coating with Reinforced Intermediate Layers</li><li>Layer-by-Layer Finite Element Analysis of Smart Composite Plates</li><li>Cuprous Oxide Films Prepared by Using a Microwave Atmospheric Pressure Plasma Torch</li><li>Composites of Pet and PBT/PP with Bentonite</li><li>Analytical Solutions for Crack-Tip Higher Order Stress Fields in Thermal Barrier Coating</li><li>The Discontinuous Higher Order Fields for Anti-Plane Crack at Interface</li><li>Effect of Electrospun Fibers on the Interlaminar Properties of Woven Composites</li><li>Functionally Graded Dental Implant and its Effect on Bone Remodeling</li><li>A Study on Improvement Capture Velocity for Increasing Inhalation Efficiency of Hood in Local Ventilation System</li><li>Study on Three-Dimensional Thermal Deformation of Aluminum Casting Tire Mold by Numerical Analysis and Experiment </li><li>Anisotropy Control of Cold Rolled Cu-Ag Alloys</li><li>Ageing Behavior of Cu-Ag Alloys</li><li>Microcosmic Growth Process of ZnO Microrods</li><li>Composite Ceramics Reinforced with Zirconia Nanopowders</li><li>Bioglasses in the SiO₂-CaO-P₂O₅ System</li><li>Heat and Fluid Flow Characters of Single-Screw for Extrusion Molding by Finite Element Analysis</li><li>A Study on Corrosion Defect Evaluation of Painted Metal by Using Nondestructive Tests</li><li>Ultra-Small Superparamagnetic Iron Oxide Nanoparticles as MRI Contrast Enhancing Agents</li><li>Novel Synthesis of Ultra-Small Silver Nanoparticles with High Antimicrobial Activity </li><li>Influence of Annealing on the Magnetic Properties of Fe₅₀Co₅₀ Films</li><li>A New Method for Temperature Measurement by the Nanometer Particles</li><li>Characterization of Iron Doped Titanium Nitride Thin Films Prepared by Magnetron Sputtering</li><li>Toxicology Studies of a Superparamagnetic Iron Oxide Nanoparticle <i>In Vivo</i></li><li>Preparation of Aspect Ratio-Controlled Carbon Nanotubes</li><li>Fabrication of Organic Silk Fibroin/Multiwalled Carbon Nanotube Composite Cryogels by Freeze-Drying Method</li><li>Multiwalled Carbon Nanotubes-Incorporated Polyurethane Nanocomposites</li><li>Nanosize Copper Dispersed Ionic Liquids as an Electrolyte of New Dye-Sensitized Solar Cells</li><li>Sensing of Ethanol with Nanosize FeZnO Thin Films</li><li>Applications of Cu@C Nanoparticles in New Dye-Sensitized Solar Cells</li><li>Chemical Structure of Nanosize Copper Wires in MCM-41</li><li>Analysis of Infrared Thermography during Tensile Test of GFRP</li><li>Thermal Viscoelastic Analysis of 3D Fabric Nanocomposites</li><li>Periodic and Chaotic Motions of a Simply Supported FGM Plate with Two Degrees-of-Freedom</li><li>Blending of Natural Fibres and Thermoplastics by Screwless Extrusion</li><li>The Influence of Surface Modification of Multi-Walled Carbon Nanotubes on the Electrical Property of its Polyethylene Composites</li><li>Preparation, Adhesive Performance and Stability of Natural Rubber Latex Grafted with N-Butyl Acrylate (BA) and Methyl Methacrylate (MMA)</li><li>Investigating Nanoparticle Effect on the Mode I Fracture Toughness of Glass/Epoxy Composites</li><li>Diagnostic Imaging for Structural Damage</li><li>The Effect of Octa(Maleimidophenyl)Silsesquioxane on Thermal and Dielectric Properties of Bismaleimide-Triazine Resins</li><li>Polycarbonate-Carbon Nanofibers Composites: An Electron Spin Resonance Study</li><li>Stretching-Induced Orientation for Improving the Mechanical Properties of Electrospun Polyacrylonitrile Nanofiber Sheet</li><li>Electric Field Distribution in Macro Fiber Composite Using Interdigitated Electrodes</li><li>Two-Dimensional Fractal Structures of Metal Oxides Synthesized at Room Temperature</li><li>Synthesis and Characterization of Europium Ternary Luminescence Coordination Compound Nanorods</li><li>Fourier Transform Infrared Study on Sol-Gel Derived Manganese-Doped Hydroxyapatite</li><li>Fracture Behavior of Natural Fiber Reinforced Biopolymer Matrix Composite</li><li>Photo- and Thermo-Chromic Study of the Ethylenediamine Trimolybdate</li><li>Titanium Alloy Ti6Al4V's Corrosion Resistance Behavior by Double Glow Discharge Plasma Hydrogen-Free Carburizing Process</li><li>Study on Osteoinductivity of Injectable Calcium Phosphate Cement Scaffold</li><li>Study on the Low-Velocity Impact Behavior of CFRP with Nanoclay-Filled Epoxy Matrix</li><li>Fabrication of Highly Ordered Titania Nanotubes in Viscous Organic Electrolytes</li><li>Tensile Properties of Different Silkworm Silk Fibers</li><li>Preliminary Study on a High Strength Nanoclay/Epoxy Coating for Ocean Engineering Applications</li><li>Manufacture of a Homogenous Nano-Diamond/Poly (Lactic Acid) Bio-Engineered Composite</li><li>Production of a Green Composite: Mixture of Poly (Latic Acid) and Keratin Fibers from Chicken Feathers</li><li>Noise Reduction by Using Composite Plate</li><li>Plastic Optical Fiber Sensors for Measurement of Large Strain in Geotextile Materials</li><li>High-Energy Influences of Substance's Flows on Structural Changes in Materials</li><li>Glass Substrate with UV Imprinted Polymer Moth Eye Structure</li><li>Study on Non-Halogen Flame-Retarded HIPS with High Strength HIPS</li><li>Optimal Design of Nanostructures Used in Vibration Control </li><li>Homogenization, Numerical Analysis & Optimal Design of MR Fluids</li><li>Variational Approach in Optimal Design of Piezoelectric Sensors & Actuators</li><li>Application of Three-Dimensional Displacement and Strain Distribution Measurement by Windowed Phase-Shifting Digital Holographic Interferometry</li><li>Development of Model of the Superdeep Penetration of Microparticles </li><li>Possible Reasons of Degradation of Elements of Space Vehicle Control-Systems</li><li>Determination of Damages in Superdeep Penetration and Alteration of Properties of Materials under the Extreme Conditions</li><li>Characterisation and Novel Applications of Fibrillar Polymer Composites </li><li>Behavior of CFRP Wrapped Concrete Columns with Partial Deteriorated Strength</li><li>Nano-Cellulose as Promising Biocarrier</li><li>Surface Characteristics of Magnesium Alloys Treated by Anodic Oxidation Using Pulse Power</li><li>Bone-Implant Contact of Surface-Modified Titanium Implants</li><li>Irradiation of Synthesized Magnetic Nanoparticles and its Application for Hyperthermia</li><li>Surface Morphological Changes Accompanying Dissolution of Bioactive Glass: Effect of Residual Stress</li><li>Effect of pH Value on Synthesis of Calcium Phosphates</li><li>Surfaces Modified by Amphiphilic Copolymer: Preparation and Application</li><li>Near-IR Sensitive Au-Au₂S Nanoparticles with Biocompatibility for Drug Delivery</li><li>Novel Organic-Inorganic Hybrid Nanoparticles as Non-Viral Gene Vector</li><li>Bioassay Based on Photonic Crystal</li><li>Distinctive Degradation Behaviors of Electrospun PGA, PLGA and P(LLA-CL) Nanofibers Cultured with/without Cell Culture</li><li>A Retrievable Polymer Urethral Stent for Treatment of Urethral Strictures</li><li>Activation of MAPK and NF-?B Induced by Biomaterials in Vascular Endothelial Cells</li><li>An Evaluation of CaF₂ Doping Tricalcium Silicate as Dental Restorative Materials</li><li>Construction of Nonbiofouling Biofunctional Glass Surface by Self-Assembled Monolayer and Graft Hydrophilic Polymer</li><li>Poly(L-Lactide)/Multiwalled Carbon Nanotube Composites: Interaction with Osteoblast-Like Cells <i>In Vitro</i></li><li>
<i>In Vitro</i> Bioactivity of Potassium Titanate Whiskers</li><li>Kinetic Effect of Cationic Comb-Type Copolymers on DNA Hybridization</li><li>Bio-Fabrication of Patterned Cellulose Nano-Fibers</li><li>Electrospinning Nanocomposite Nanofibers of Hydroxyapatite/Chitosan </li><li>Plasma Polymerized Thin-Films for Biosensors</li><li>The Design of Novel Scaffolds by Integrating Microbial Cellulose onto Plasma Treated Polypropylene</li><li>Study on Blood Compatibility of SIS Modified by Plasma Surface Grafting </li><li>An Experimental and Computational Study on Zn-Substituted Hydroxyapatite</li><li>Biocompatibility and Osteogenesis of Calcium Phosphate Cement Scaffolds for Bone Tissue Engineering</li><li>Electrochemical Deposition of Fluoridated Calcium Phosphate Thin Film on Titanium Substrates</li><li>Deformation and Fracture of Bone Analogue Biomaterials Having Different Polymer Matrices</li><li>Totally Biodegradable and Osteoconductive Composite Material Consisting of Polyhydroxybutyrate and Tricalcium Phosphate for Bone Tissue Repair</li><li>
<i>In Vitro</i> Degradation and Protein Adsorption Characteristics of PHBV/PLLA Blends and PHBV/PLLA-Based Tissue Engineering Scaffolds</li><li>Characteristics and Chemical Stability of the Bioactive Titania Layer Formed on Ti, Ti-6Al-4V and NiTi SMA through a Low Temperature Oxidation Process</li><li>Investigation of Platelet Adhesion Behavior on Si-N-O Films Synthesized by Unbalanced Magnetron Sputtering</li><li>Adsoption CD34 Antibody onto the Col/Hep Coating Film on Titanium to Improve Cytocompatibility of Titanium</li><li>Deposition of Diamond-Like Carbon Films on Polyoxymethylene Substrates by Magnetic Filtered Cathodic Vacuum Arc Deposition</li><li>Study the Restenosis after Percutaneous Transluminal Coronary Angioplasty(PTCA) in the Organ Culture System</li><li>MCP-1 Expression Associated with Inflammation and Biomaterials</li><li>The Biomedical Material of Functional ePTFE Hydrogels by the Cold Plasma Method and Radiation Technique</li><li>Influence of Hydrogen-Plasma Treatment on Blood Compatibility of Titanium Oxide Films</li><li>Novel Silicon Based Anodic Spark Deposition Treatment for Dental Implant</li><li>
<i>In Vitro</i> Biocompatibility Study of Nano TiO₂ Materials</li><li>Insertion Behavior of Microneedles for Drug Delivery</li><li>Microstructure Control and Pseudoelasticity of Ti-Nb-Ge Alloy</li><li>Effect of Oxygen Content on Microstructure and Mechanical Properties of Ti-Nb-Ge Alloys for Biomedical Application</li><li>An Investigation into Dual-Source and Dual-Power Electrospinning of Nanofibrous Membranes for Medical Applications</li><li>Preparation of Lactic Acid Based Polyurethanes Modified by Castor Oil</li><li>Preparation and Characterization of Golden-Colored Pigments Based on Silver Coated with Metal Oxides</li><li>Effects of Lead and Boride Inhibitors on the Passivity of Nickel Alloy 600 Surface</li><li>A Study on the Tribological Behavior of Valve Train System by Low Friction Coating</li><li>Fabrication of Chemiluminescence Sensor Based on the Funcinalized MWCNT-Nafion Composite Film</li><li>Radiolytic Deposition of Pt-Ru Catalysts on the Conductive Polymer Coated MWNT and their Catalytic Efficiency for CO and MeOH</li><li>Synthesis and Characterization of (C, N)-Alloyed Stainless Steel Coatings by High Energy Ion Assisted Magnetron Sputtering Deposition</li><li>Mechanical Mechanisms of Chemical Mechanical Polishing</li><li>Tribological Properties of a Partially Transformed Carbon Layer from SiC</li><li>Effects of Surfactant Concentration on Step Height Reduction of SiO₂ in Chemical Mechanical Polishing with Ceria Slurry</li><li>The Characteristics and Thermal Stability of CrN/AlSiN Multilayer Coatings</li><li>Effect of Foreign Metal Doping on the Gas Sensing Behaviors of SnO₂-Based Gas Sensor </li><li>Deposition of Pd onto SnO₂ Nanoparticles-Based Gas Sensors Using a Pd Complex as the Precursor</li><li>H₂ Sensing Performance of TiO₂-Based Diode-Type Sensors</li><li>Characterization of Intercalation Type Organic/MoO₃ Nanohybrids and their VOC Sensing Properties</li><li>Effect of Supported Transition Metal on CO Sensing Performance Using SnO₂ in Reducing Atmosphere</li><li>Resistive Type Sensor Using Ceria Thick Film with Nano Particles</li><li>Fabrication of Nano Particles on Vertically Aligned Multi-Wall Carbon Nanotubes by E-Beam Evaporation</li></ul>