Environmental Degradation of Engineering Materials & Materials Engineering and Technologies

Electrochemical Deposition of the Ca-P Coatings on the Porous Nanocrystalline Ti-6Al-4V AlloyStudy of Iron-Based Alloys in Solid Oxide Fuel Cell Temperature and Atmosphere Conditions, Effect of a Silver-CoatingFEM Analysis of Lower Premolar Root Canal FillingEffect of Cavitation on Absorption and Transport of Hydrogen in IronPrevention to Hydrogen Degradation of SteelDetermination of Failure Causes of a Steam Turbine CasingEffect of the Ceramic Dispersion in the Nickel Matrix Composite Coatings on Corrosion Properties after Plastic WorkingIodine-Induced Stress Corrosion Cracking of Zircaloy-4: Identification of Critical Parameters Involved in Intergranular to Transgranular Crack PropagationApplication of EIS to Study the Corrosion Resistance of Passivated NiTi Shape Memory Alloy in Simulated Body FluidPerovskites in Solid Oxide Fuel CellsThe Effect of Low-Temperature Glow Discharge Nitriding of Duplex Stainless Steel on Absorption and Desorption of HydrogenQuality Investigation of Au Nanoarrays for Biosensing ApplicationPreparation and Characterization of TiO2 Nanostructures for Catalytic CO2 PhotoconversionInfluence of Type of Material on Performance of Hydraulic Components in Thermal Shock ConditionsUnderwater Welding of Duplex Stainless SteelDegradation of Gel-Coat Layer in Glass/Polyester Laminate in Seawater EnvironmentEffect of Crystallization Process at Cryogenic Conditions on the Functional Properties of the SUPERSTON Alloy Used in Production the Ship?s PropellersMicrobial Aspects in Corrosion Studies of Stainless SteelsNumerical Modeling of Magnetorheological Elastomers Microstructure Behavior under Magnetic FieldSurface Modification of Pure Titanium by TiB PrecipitationFormation of High Corrosion Resistant Nanotubular Layers on Titanium Alloy Ti13Nb13ZrElectrochemical Properties of Ni-Cr and Co-Cr Alloys Used in ProsthodonticsWear and Corrosion Characteristics of the Layers Type (Mn-P) Formed on Aluminium AlloysFormation of Porous Structure of the Metallic Materials Used on Bone ImplantsExperimental Investigations of MREs Behavior under the Cyclic LoadOxidation Time Influence on the Structure of the Cobalt Base Clad Layer and Scale MorphologyOptimization of Self-Organized TiO2 Nanotube Geometry on Ti and Ti Alloys Using Fuzzy Logic ReasoningPositive Effect of Hydrogen Treatment in Titanium Ti-6Al-4V AlloyCorrosion of Ni-Al and Ni-Al-Al2O3 Flame Sprayed Coatings of ?CastoDyn 8000" System in 0.01 M H2SO4 and 3.5% NaCl SolutionsThe Effect of Welding Conditions on Diffusible Hydrogen Content in Deposited MetalCavitation Erosion Resistance of Austenitic Stainless Steel after Glow-Discharge Nitriding ProcessEvaluation of Hydrogen Degradation by In Situ Ultrasonic TestingEffects of Laser Remelting at Cryogenic Conditions on Microstructure and Wear Resistance of the Ti6Al4V Alloy Applied in MedicineMaterials Design for the Titanium Scaffold Based ImplantIndoor Atmospheric Degradation of Historical Metal Objects Studied by Spectroscopic TechniquesModelling of the Heat Flux Density Distribution for Laser Beam WeldingExperimental and Quantum Chemical Study of Quinone Derivatives as Inhibitors of Corrosion and Hydrogen Absorption by Steel